Peroxidase-like catalytic activity of Mn- and Fe-tetrakis(4-carboxyphenyl)porphines bound to aminopropyl-glass bead in oxidative reaction of heterocyclic amines

Fe- or Mn-tetrakis(4-carboxyphenyl)porphine (Fe- and Mn-TCPP) bound to aminopropyl-glass bead (Fe- and Mn-TCPP_gs) was examined for the peroxidase (POD)-like function in order to develop a solid catalyst which can exhibit POD-like activity without adsorbing heterocyclic amines (HCAs). Mn-TCPP in aqueous solution had only a slight POD-like catalytic activity on HCAs (IQ and MeIQ). As for Fe-TCPP, it was impossible to examine the POD-like activity since it reacted with hydrogen peroxide in a liquid reaction system. However, both Fe- and Mn-TCPP when immobilized on aminopropyl-glass bead via peptide bond (Fe- and Mn-TCPP_gs), catalyzed the oxidative reaction of mutagenic HCAs with hydrogen peroxide. The catalytic activity of Fe- and Mn-TCPP_gs was investigated in more detail using as a substrate IQ and MeIQ which were oxidized more rapidly among the tested HCAs. Consequently, the optimal conditions for the oxidative reaction catalyzed by Fe- and Mn-TCPP_gs were determined. In addition, ESI-mass and absorption spectra of oxidation products of IQ and MeIQ showed that they are dimers. Thus, it was demonstrated that a solid catalyst with POD-like activity can be obtained by immobilizing Fe- and Mn-TCPPs on aminopropyl-glass beads.     

Peroxidase-catalysed fluorescence reaction using tyrosine as substrate

Summary The fluorescence reaction using the catalytic effect of horse radish peroxidase on the oxidation of tyrosine by hydrogen peroxide has been investigated. The reaction product fluoresces at 412 nm (excitation at 316 nm). Microamounts of hydrogen peroxide and tyrosine can be determined with good accuracy and reproducibility. The proposed method has been used to determine glucose and tyrosine in human serum. The results are satisfactory. The characteristics of tyrosine have been compared with those of homovanillic acid in the enzyme-catalysed reaction system.

---

Peroxidase-katalysierte Fluorescenzreaktion mit Tyrosin als Substrat

     

Liposome modified with Mn-porphyrin complex can simultaneously induce antioxidative enzyme-like activity of both superoxide dismutase and peroxidase

An antioxidative liposome catalysis that mimics both superoxide dismutase (SOD) and peroxidase (POD) activities has been developed by using the liposomes modified with lipophilic Mn-(5,10,15,20-tetrakis[1-hexadecylpyridium-4-yl]-21H,23H-porphyrin) (Mn-HPyP). The SOD- and POD-like activities of the Mn-HPyP-modified liposome were first investigated by varying the type of phospholipid, such as 1,2-distearyl-sn-glycero-3-phosphocholine (DSPC), 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC), 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC), and 1,2-dilauroyl-sn-glycero-3-phosphocholine (DLPC). Higher SOD-like activity was obtained in the case of DLPC and DMPC liposomes, in which the ligands were well-dispersed on the membrane in the liquid crystalline phase. The POD-like activity was maximal in the case of DMPC liposome, in which the Mn-HPyP complex was appropriately clustered on the membrane in the gel phase. On the basis of the above results, the co-induction of the SOD and POD activities to eliminate the superoxide and also hydrogen peroxide as a one-pot reaction was finally performed by using the Mn-HPyP-modified DMPC liposome, resulting in an increase in the efficiency of the elimination of both superoxide and hydrogen peroxide.     

Peroxidase-like activity on organic hydroperoxides of ion-exchange resins modified with metal-porphine analogues and analytical application for determination of linoleate hydroperoxide

The ion-exchange resins modified with metal-porphyrins and -phthalocyanines (M-P(r)) have been found to exhibit a peroxidase (POD)-like activity on organic peroxides in a reaction wherein a quinoid dye is formed from phenol and 4-aminoantipyrine. Among them, Mn- and Co-P(r) exhibited stronger activity than hemoglobin and Fe-P(r), and hence were expected to be practically useful as a solid catalyst for the determination of linoleate hydroperoxide (LOOH). In addition, a resin modified with Co(3+)-phthalocyanine tetrasulfonate (Co-PCS(r)) lacks POD-like activity on hydrogen peroxide in contrast with Mn-P(r). We, therefore, concluded that Co-PCS(r) is superior to both Mn-P(r) and hemoglobin as a solid catalyst on organic hydroperoxides, and developed a new method for the determination of LOOH.     

Electrocatalytic activity of nanoporous Pd and Pt: effect of structural features

The electrocatalytic activities of nanoporous palladium (npPd) and platinum (npPt) for oxygen reduction reaction (ORR) under alkaline conditions and hydrogen peroxide electrochemical reactions under neutral conditions were examined. npPd and npPt were prepared by the electrochemical deposition of each metal from the corresponding metal precursor in the presence of reverse micelles of Triton X-100, directing highly porous microstructures. The nanoporous catalysts showed excellent electrocatalytic activity for both the ORR and hydrogen peroxide electrochemical oxidation/reduction due to the increased active surface area. In particular, the npPd exhibited superior ORR activity (i.e., more positive onset and half-wave potentials, higher current density and greater number of electrons transferred) despite the smaller roughness factor than the npPt and commercial Pt. The catalytic activity for the hydrogen peroxide electrochemical reactions was also higher while using npPd (i.e., faster electrode reaction kinetics, increased current densities, etc.) compared to npPt. The higher catalytic activity of npPd than that of npPt suggests an advantage of the unique npPd structure, composed of nano- as well as micro-porosity, in facilitating mass transport through the porous metal layer. The npPd exhibited amperometric current responses, induced by the oxidation as well as reduction of hydrogen peroxide, linearly proportional to the hydrogen peroxide concentration with a rapid response time (<~2 s), high sensitivity, and low detection limit (<1.8 μM).     

Peroxygenase‐Catalyzed Oxyfunctionalization Reactions Promoted by the Complete Oxidation of Methanol

Peroxygenases catalyze a broad range of (stereo)selective oxyfunctionalization reactions. However, to access their full catalytic potential, peroxygenases need a balanced provision of hydrogen peroxide to achieve high catalytic activity while minimizing oxidative inactivation. Herein, we report an enzymatic cascade process that employs methanol as a sacrificial electron donor for the reductive activation of molecular oxygen. Full oxidation of methanol is achieved, generating three equivalents of hydrogen peroxide that can be used completely for the stereoselective hydroxylation of ethylbenzene as a model reaction. Overall we propose and demonstrate an atom‐efficient and easily applicable alternative to established hydrogen peroxide generation methods, which enables the efficient use of peroxygenases for oxyfunctionalization reactions.     

Copper catalysts based on fiberglass supports for hydrocarbon oxidation reactions with the participation of hydrogen peroxide

Copper-containing catalysts were prepared by the adsorption of the ammonia complexes of Cu(II) on the surface of a silicate fiberglass material followed by the thermal and oxidative treatment of the samples. The states of copper after the adsorption of ammonia complexes and in the prepared samples were characterized using electronic diffuse reflectance spectroscopy. The catalytic activity of the samples in hydrogen peroxide decomposition and cyclohexane oxidation reactions was studied. It was found that molecular oxygen can be involved in the radical process of hydrogen peroxide oxidation. Based on spectroscopic data, it was hypothesized that partially reduced Cu(I)–Cu(O) compounds are active species in the catalysts of this type.     

Studies on substrates for the spectrophotometric determination of hydrogen peroxide based on the catalytic effects of peroxidase-like metalloporphyrins

Summary The effects have been studied of ten phenol derivatives as chromogenic substrates for the hydrogen peroxide oxidation of 4-aminoantipyrine, catalysed by horse radish peroxidase or peroxidase-like metalloporphyrins. Sodium 2-hydroxy-3,5-dichlorobenzene-sulfonate was found to be the most suitable substrate for the determination of H₂O₂.     

Use of intercalated clays in oxidation of organic dyes

Intercalated materials based on natural montmorillonite and Fe- and mixed Fe/Al-polyhydroxo complex were obtained and their texture properties were studied. The catalytic properties of these materials were examined in the reaction of oxidation of an organic dye, Direct Pure Blue, with hydrogen peroxide in aqueous solutions. The optimal conditions of oxidation of azo dyes in the presence of intercalated clays were determined. In these conditions, a 100% oxidation of dye solutions can be achieved, with the stability of catalysts preserved.     

Enzymatic determination of cholesterol, l-amino acids and linoleic acid with a novel redox indicator system

A sensitive kinetic fluorimetric system is proposed for the determination of hydrogen peroxide produced by enzymatic oxidation of cholesterol, l-amino acids and linoleic acid. 2-Hydroxynaphthaldehyde thiosemicarbazone (HNTS) is oxidized by hydrogen peroxide or hydroperoxides in an ammoniacal medium in a Mn(II)-catalyzed reaction to give a fluorescent product (λ_ex = 390 nm, λ_em = 450 nm). The lowest concentration of hydrogen peroxide determined is 50 pmol. Cholesterol was determined in egg yolk, cod liver oil and horse serum. The ranges of concentration for substrates were 0.33–3.74 μM cholesterol; 0.3–10 μM, 0.6–15 μM and 0.75–10 μM, for l-leucine, l-phenyalanine and l- serine, respectively; and 15–150 μM linoleic acid.     

Enzymatic polymerization of vinyl monomers

The possibility of using horse radish peroxidase as a catalyst for polymerization of monomers (vinylformamide and sodium vinylsulfonate) in the presence of hydrogen peroxide and 2,4-pentanedione in aqueous medium at room temperature was studied.     

石墨烯负载的金属氧化物纳米颗粒的可控制备及催化性能

采用直接浸渍法、过氧化氢均相氧化沉积法和氨水催化水解法制备了石墨烯负载的铁、钴、镍金属氧化物纳米颗粒.研究了三种沉积方法对颗粒尺寸分布的影响;采用透射电子显微镜、傅里叶变换红外光谱、X射线衍射和X射线光电子能谱表征了催化剂的形貌与结构.用过氧化氢均相氧化沉淀法可制得粒径分布最均匀的纳米颗粒.过氧化氢的氧化作用可使石墨烯表面的氧化基团含量最大化,为纳米颗粒提供了足够的吸附与成核点.氨水加速了金属离子的水解与成核,导致纳米颗粒的粒径增大与不均.以苯甲醇氧化为探针反应考察了催化剂的性能.催化剂的活性按以下顺序逐渐下降:过氧化氢辅助沉积法>直接浸渍法>氨水催化水解法,与纳米颗粒尺寸增长趋势一致.纳米催化剂颗粒尺寸与其活性的良好关联性显示,发展石墨烯负载尺寸可控的纳米催化剂的方法具有重要意义.     

Oxidation of olefins and sulfides with different oxidants catalyzed by meso-tetra(n-propyl)porphyrinatomanganese(III) acetate: comparison with meso-tetra(phenyl)porphyrinatomanganese(III) acetate

In this study, the catalytic activity of meso-tetra(n-propyl)porphyrinatomanganese(III) acetate, MnT(n-pr)(OAc) in oxidation of olefins and sulfides with tetra-n-butylammonium Oxone (TBAO), tetra-n-butylammonium periodate (TBAP), aqueous hydrogen peroxide, sodium periodate and Oxone in the presence of imidazole (ImH) has been studied. The comparison of catalytic performance of MnT(n-pr)P(OAc) and MnTPP(OAc) in oxidation of olefins with TBAP shows that while the latter is four times more efficient than the former, the extent of oxidative degradation of the former is ca. 3.5 times greater than the latter. The use of excess amount of styrene resulted in only a ca. 10 % increase in the catalyst stability, suggesting a mainly intramolecular mechanism for the catalyst degradation. On the other hand, in the case of TBAO, the oxidative degradation of the former is four times greater than the latter, but the catalytic performance of the latter for the oxidation of cyclohexene was only ca. 2 times larger than the former. This observation shows that the decreased catalytic performance of MnT(n-pr)P(OAc) relative to MnTPP(OAc) is essentially due to the high degree of degradation of the former. Due to the high degree of catalyst degradation, oxidation of olefins with periodate and Oxone in the presence of the two manganese porphyrins in aqueous solution (or with hydrogen peroxide in dichloromethane) gave little or no product. Oxidation of sulfides with TBAO and TBAP in the presence of MnT(n-pr)P(OAc) showed a conversion of ca. 15 % for the catalytic oxidation of sulfides to sulfones.     

Catalytic properties of Fe-Cu-Al-montmorillonites in the oxidation of acid chrome dark blue azo dye

Interlayer cations in the sodium form of the aluminosilicate montmorillonite (Mt) have been exchanged by mixed, bulky, polynuclear hydroxo cations (Al: (Fe + Cu) = 10, Cu: Fe = 0–1, OH: (Fe + Cu + Al) = 2), and the product has been heat-treated to obtain Fe-, Fe-Al-, and Fe-Cu-Al-containing materials (Fe-Cu-Al-Mt). The chemical composition and textural characteristics of the materials depend on the Cu: Fe molar ratio. The catalytic properties of the materials in the oxidation of acid chrome dark blue (ACDB) azo dye with hydrogen peroxide have been investigated. The activity and stability of the Fe-Cu-Al-Mt systems are determined by the quantity of copper and iron atoms introduced into the structure of the material. As the iron ion content is increased, the specific catalytic activity of the system increases and the system becomes less resistant to the leaching of iron ions into the solution. Raising the copper content of the system above 0.07 wt % reduces its activity and stability. The effects of the catalyst content, pH of the solution being oxidized, and reactant ratio (H₂O₂: ACDB) on the reaction rate have been studied. The ACDB oxidation conditions have been optimized.     

有序介孔锰氧化物催化过氧化氢降解水中诺氟沙星

采用硬模板法制备了有序介孔氧化锰,并用过氧化氢氧化诺氟沙星的降解率及其抗菌活性变化评价了其催化活性.研究发现,有序介孔锰氧化物表现出较高的催化活性;低pH有利于提高其催化活性.与单独过氧化氢氧化过程相比,有序介孔锰氧化物的存在明显减弱了诺氟沙星的抗菌活性.叔丁醇对催化体系的抑制作用表明有序介孔锰氧化物促进了过氧化氢分解生成羟基自由基.通过对诺氟沙星在催化过程中的分解产物鉴定,提出了可能的分解途径.     

Liquid chromatographic/mass spectrometric investigation on the reaction products in the peroxidase-catalyzed oxidation of <Emphasis Type="Italic">o</Emphasis>-phenylenediamine by hydrogen peroxide

Mass spectrometric evidence was obtained to confirm that the main reaction product of the horseradish peroxidase (POD)-catalyzed oxidation of o-phenylenediamine (OPD) by hydrogen peroxide is 2,3-diaminophenazine. Although this reaction is one of the most widespread detection schemes in enzyme-linked immunosorbent assays (ELISAs), the literature data on the identity of the reaction product(s) have been strongly contradictory throughout the last few decades. Liquid chromatography with UV/Vis and mass spectrometric detection as well as exact mass measurements after LC fraction collection have led to the unambiguous identification of 2,3-diaminophenazine as main reaction product. 2,2-Diaminoazobenzene, which is frequently described in other publications to be the major reaction product, was not detected at all.     

Selective oxidation of sulfides and oxidative bromination of organic substrates catalyzed by polymer anchored Cu(II) complex

A new polymer-anchored Cu(II) complex has been synthesized and characterized. The catalytic performance of the complex has been tested for the oxidation of sulfides and in oxidative bromination reaction with hydrogen peroxide as the oxidant. Sulfides have been selectively oxidized to the corresponding sulfoxides in excellent yields and in the presence of KBr as the bromine source, organic substrates have been selectively converted to mono bromo substituted compounds using polymer-anchored Cu(II) catalyst. This catalyst showed excellent catalytic activity, high selectivity, and recyclability. The polymer-anchored Cu(II) catalyst could be easily recovered by filtration and reused more than five times without appreciable loss of its initial activity.     

Aromatic derivatives and tellurium analogues of cyclic seleninate esters and spirodioxyselenuranes that act as glutathione peroxidase mimetics

[Reaction: see text]. Several novel organoselenium and tellurium compounds were prepared and evaluated as mimetics of the selenoenzyme glutathione peroxidase, which protects cells from oxidative stress by reducing harmful peroxides with the thiol glutathione. The compounds were tested for catalytic activity in a model system wherein tert-butyl hydroperoxide or hydrogen peroxide were reduced with benzyl thiol and the rate of the reaction was measured by monitoring the formation of dibenzyl disulfide. Thus, aromatic derivatives 19, 22, 24, and 25 proved to be inferior catalysts compared to the parent cyclic seleninate ester 14 and spirodioxyselenurane 16. In the case of 19 and 22, this was the result of their rapid conversion to the relatively inert selenenyl sulfides 31 and 32, respectively. In general, hydrogen peroxide was reduced faster than tert-butyl hydroperoxide in the presence of the selenium-based catalysts. The cyclic tellurinate ester 27 and spirodioxytellurane 29 proved to be superior catalysts to their selenium analogues 14 and 16, respectively, resulting in the fastest reaction rates by far of all of the compounds we have investigated to date. Oxidation of 29 with hydrogen peroxide produced the unusual and unexpected peroxide 33, in which two hypervalent octahedral tellurium moieties are joined by ether and peroxide bridges. The structure of 33 was confirmed by X-ray crystallography. Although 33 displayed strong catalytic activity when tested independently in the model system, its relatively slow formation from the oxidation of 29 rules out its intermediacy in the catalytic cycle of 29.     

过氧化物模拟酶催化的苯基荧光酮氧化反应及其分析应用

在ＮＨ４Ｃｌ－ＮＨ４ＯＨ缓冲介质中，氯化血红素（Ｈｅｍｉｎ）有显著的过氧化物模拟酶活性，催化过程化氢氧化苯基荧光酮褪色。本文探讨了反应机理，比较Ｈｅｍｉｎ与天然酶催化性能，考察反应条件和共存物质影响，从而提出测定Ｈｅｍｉｎ和过氧化氢的高灵敏分光光度法，线性范围分别为０￣３．０×１０＾－８ｍｏｌ／Ｌ和０￣１．２×１０＾５ｍｏｌ／Ｌ；检测限（３σ）分别为１．８×１０＾－１０ｍｏｌ／Ｌ和１．４×１０＾７     

金属铜配合物催化氧化1-(3,4-二甲氧基苯)乙醇的动力学研究

合成了1-(3,4-二甲氧基苯)乙醇(DMPE)作为木质素模型物,并用初始速率法研究了40℃时在pH6.5～8.5磷酸缓冲溶液中N,N-双(2-乙基-5-甲基-咪唑-4-亚甲基)乙醇胺合铜、N,N-双(2-(2-羟乙基胺基)乙基)草酰胺合铜和5,7,12,14-四甲基-1,4,8,11-四氮杂环十四-4,7,11,14-四烯合铜催化氧化1-(3,4-二甲氧基苯)乙醇的动力学,提出了1-(3,4-二甲氧基苯)乙醇氧化反应动力学模型,并由此计算出不同pH值条件下催化反应动力学参数k2和Km.铜配合物的催化活性随着pH的增大而增大.具有大共轭体系的配体催化剂表现出更好的催化活性.提出并讨论了H2O2氧化DMPE的催化氧化反应机理.