毛细管电泳电化学法分离检测盐酸克伦特罗、特布他林和沙丁胺醇

建立了毛细管电泳电化学法对盐酸克伦特罗、特布他林和沙丁胺醇进行分离检测。方法采用胶束电泳体系,以铂圆盘为工作电极,考察了检测电位、缓冲液浓度和pH、十二烷基硫酸钠(SDS)浓度、分离电压等因素的影响。3个分离物在10 kV的分离电压、缓冲体系为15 mmol/L(pH 9.0)硼砂+20 mmol/L SDS条件下得到分离。盐酸克伦特罗、特布他林和沙丁胺醇的线性范围分别为2.0～400,3.5～700,5.0～1000μg/L。方法已用于猪肉样品的检测。     

Determination of mannitol and three sugars in Ligustrum lucidum Ait. by capillary electrophoresis with electrochemical detection

A method based on capillary electrophoresis with electrochemical detection has been developed for the separation and determination of mannitol, sucrose, glucose, and fructose in Ligustrum lucidum Ait. for the first time. Effects of several important factors such as the concentration of NaOH, separation voltage, injection time, and detection potential were investigated to acquire the optimum conditions. The detection electrode was a 300 μm diameter copper disc electrode at a working potential of +0.65 V (versus saturated calomel electrode (SCE)). The four analytes can be well separated within 13 min in a 40 cm length fused-silica capillary at a separation voltage of 12 kV in a 75 mM NaOH aqueous solution. The relation between peak current and analyte concentration was linear over about three orders of magnitude with detection limits (S/N = 3) ranging from 1 to 2 μM for all analytes. The proposed method has been successfully applied to monitor the mannitol and sugar contents in the plant samples at different growth stages with satisfactory assay results.     

A modified electrode for the electrochemical detection of biogenic amines and their amino acid precursors separated by microchip capillary electrophoresis

The use of a mixed-valent ruthenium oxide/hexacyanoruthenate polymeric film electrochemically deposited onto glassy carbon electrodes is proposed here for the detection of biogenic amines and their amino acid precursors, following their separation by microchip capillary electrophoresis. The ability of this ruthenium coating to electrocatalyze the oxidation of aliphatic and heterocyclic amines, as well as their amino acid precursors, was checked by using ethanolamine, tryptamine and tryptophane as prototype compounds and adopting a 25 mM sulphuric acid as the electrolyte in the detection cell, where a constant potential of 1.05 V versus Ag/AgCl, 3 M KCl was applied to the modified working electrode. Optimization of parameters affecting both detection and separation steps led to satisfactory separations when performed by using a 20 mM phosphate running buffer (pH 2.5) and applying a high voltage of 2.5 kV both in the separation and in the electrokinetic injection (duration 4 s). The recorded peaks were characterized by good repeatability (RSD ≤ 3.6%), high sensitivity and a wide linear range. Detection limits of 23 μM (1.4 mg/L), 27 μM (4.3 mg/L) and 34 μM (6.8 mg/L) were inferred for ethanolamine, tryptamine and tryptophane, respectively. The approach proposed here was also applied for the analysis of some double malt dark beers spiked with a controlled amount of the analytes considered.     

Rapid determination of paeoniflorin and three sugars in Radix Paeoniae Alba by capillary electrophoresis.

A method based on capillary electrophoresis with electrochemical detection has been developed for the separation and determination of paeoniflorin, sucrose, glucose, and fructose in traditional Chinese medicine, Radix Paeoniae Alba. The effects of several important factors, such as the concentration of NaOH, the separation voltage, the injection time, and the detection potential, were investigated to determine the optimum conditions. The detection electrode was a 300-microm diameter copper disc electrode at a working potential of +0.60 V (versus SCE). The four analytes can be well separated within 8 min in a 40 cm length fused-silica capillary at a separation voltage of 12 kV in a 75 mM NaOH aqueous solution. The relation between the peak current and the analyte concentration was linear over about 3 orders of magnitude with detection limits (S/N = 3) ranging from 1 to 2 microM for all analytes. The proposed method has been successfully applied for the determination of the paeoniflorin and sugars in real plant samples with satisfactory assay results.     

Single step modification of copper electrode for the highly sensitive and selective non-enzymatic determination of glucose

A non-enzymatic sensor was developed for the determination of glucose in alkaline medium by anodisation of copper in sodium potassium tartrate solution. The morphology of the modified copper electrode was studied by scanning electron microscopy, and its electrochemical behavior by cyclic voltammetry and electrochemical impedance spectroscopy. The electrode enables direct electrocatalytic oxidation of glucose on a CuO/Cu electrode at 0.7 V in 0.1 M sodium hydroxide. At this potential, the sensor is highly selective to glucose even in the presence of ascorbic acid, uric acid, or dopamine which are common interfering species. The sensor displays a sensitivity of 761.9 μA mM^?1 cm^?2, a linear detection range from 2 μM to 20 mM, a response time of <1 s, and a detection limit of 1 μM (S/N = 3). It was tested for determination of glucose level in blood serum.     

Simultaneous Determination of Carbohydrates and Amino Acids by Capillary Zone Electrophoresis with Constant Potential Amperometric Detection at a Copper Electrode

Capillary zone electrophoresis with end-column amperometric detection at a copper microdisk electrode (100 μm in diameter) was successfully applied for simultaneous determination of carbohydrates and amino acids. Under the separation voltage of 27 kV and the separation electrolyte of 80 mM NaOH in a 75 cm fused silica capillary (10 μm i.d. × 375 μmU o.d.), complete separation of a standard mixture containing 9 carbohydrates and 12 amino acids was achieved in less than 25 min. With the electrokinetical injection of 5.4 s at 27 kV and the detection potential of 0.62 V vs. Ag/AgCl, the detection limits (S/N = 3) were 0.22–0.65 ppm (1.2–1.9 μM) for carbohydrates and 0.31–6.5 ppm (2.3–39 μM) for amino acids, respectively. The calculated numbers of theoretical plates were between 41,000 and 190,000. The use of this method for analysis of carbohydrates and amino acids in a urine sample was demonstrated.     

Quantitation of caffeine by capillary zone electrophoresis with end-column amperometric detection at a carbon microdisk array electrode

Capillary zone electrophoresis is employed for the determination of caffeine using end-column amperometric detection with a carbon fiber microdisk array electrode at a constant potential of 1.45 V versus a saturated calomel electrode. The optimum conditions of separation and detection are 0.1 52mM NaH2PO4-0.648mM Na2HPO4 for the buffer solution, 20 kV for the separation voltage, 5 kV for the injection voltage, and 10s for the injection time. The limit of detection is 2.9 x 10(-4)mM or 1.2 fmol (signal-to-noise ratio = 2). The relative standard deviation is 0.68% for the migration time and 2.3% for the electrophoretic peak current. The method is applied to determining caffeine in human serum and a cola drink.     

毛细管电泳-电致化学发光法测定兔血浆中的羟考酮

基于稀土Eu(Ⅲ)掺杂的类普鲁士蓝膜修饰的铂电极为工作电极,建立了测定羟考酮的毛细管电泳-电致化学发光分析方法。考察了检测电位、运行缓冲溶液的酸度及浓度、分离电压、进样条件等对电泳分离效果及检测灵敏度的影响。在最佳的实验条件下,羟考酮可在4 min内得到分离,其ECL强度值与羟考酮的质量浓度在7.0×10-2～7.0μg/mL和7.0～70.0μg/mL范围内呈良好的线性关系,检出限为4.2×10-2μg/mL(3σ),峰高和迁移时间的相对偏差分别为3.6%和0.48%(n=6)。方法用于兔血浆中羟考酮含量的检测,加标回收率在99.7%～101.0%之间。     

A promising dehydrogenase-based bioanode for a glucose biosensor and glucose/O2 biofuel cell

A new type of dehydrogenase-based amperometric glucose biosensor was constructed using glucose dehydrogenase (GDH) which was immobilized on the edge-plane pyrolytic graphite (EPPG) electrode modified with poly(phenosafranin)-functionalized single-walled carbon nanotubes (PPS-SWCNTs). The PPS-SWCNT-modified EPPG electrode was prepared by electropolymerization of phenosafranin on the EPPG electrode which had been previously coated with SWCNTs. The performance of the GDH/PPS-SWCNT/EPPG bioanode was evaluated using cyclic voltammetry and amperometry in the presence of glucose. The GDH/PPS-SWCNT/EPPG electrode possesses promising characteristics as a glucose sensor: a wide linear dynamic range of 50 to 700 μM, low detection limit of 0.3 μM, fast response time (1-2 s), high sensitivity (96.5 μA cm(-2) mM(-1)), and anti-interference and anti-fouling abilities. Moreover, the performance of the GDH/PPS-SWCNT/EPPG bioanode was tested in a glucose/O(2) biofuel cell. The maximum power density delivered by the assembled glucose/O(2) biofuel cell could reach 64.0 μW cm(-2) at a cell voltage of 0.3 V with 40 mM glucose.     

Determination of three bioactive constituents in moutan cortex by capillary electrophoresis with electrochemical detection.

Capillary electrophoresis with electrochemical detection has been employed for the separation and determination of the three active constituents (paeonol, benzoyloxypaeoniflorin, and oxypaeoniflorin) in traditional Chinese medicine, Moutan Cortex (root cortex of Paeonia suffruticosa Andrews). The effects of several important factors, such as the concentration of running buffer, the separation voltage, the injection time, and the detection potential, were investigated to determine the optimum conditions. The detection electrode was a 300 microm diameter carbon-disc electrode at a working potential of +0.90 V (versus SCE). The three analytes could be well separated within 7 min in a 40 cm length fused-silica capillary at a separation voltage of 12 kV in a 50 mM borate buffer (pH 9.2). The relation between the peak current and the analyte concentration was linear over 3 orders of magnitude with detection limits (S/N = 3) ranging from 0.4 to 0.7 microM for all analytes. The proposed method has been successfully applied to the determination of paeonol, benzoyloxypaeoniflorin, and oxypaeoniflorin in real plant samples with satisfactory assay results.     

Simultaneous determination of <Emphasis Type="Italic">p</Emphasis>-hydroxyacetophenone,chlorogenic acid,and caffeic acid in Herba Artemisiae Scopariae by capillary electrophoresis with electrochemical detection

Capillary electrophoresis with electrochemical detection has been employed for the determination of p-hydroxyacetophenone, chlorogenic acid, and caffeic acid in Herba Artemisiae Scopariae (the dried sprout of Artemisia scoparia Waldst. et Kit.). The effects of several important factors, such as the concentration and the acidity of the running buffer, separation voltage, injection time, and detection potential, were investigated to acquire the optimum conditions. The detection electrode was a 300-μm-diameter carbon disc electrode at a working potential of +0.90 V (relative to the saturated calomel electrode). The three analytes can be well separated within 11 min in a 40-cm-long fused-silica capillary at a separation voltage of 15 kV in 50 mM borate buffer (pH 9.2). The relation between peak current and analyte concentration was linear over about 3 orders of magnitude, with detection limits (signal-to-noise ratio of 3) of 0.31, 0.39, and 0.50 μM for p-hydroxyacetophenone, chlorogenic acid, and caffeic acid, respectively. The proposed method has been successfully applied to monitor the three bioactive constituents in real plant samples and to differentiate between different herbal drugs with satisfactory assay results.     

Determination of active constituents in Lonicera confusa DC. by capillary electrophoresis with amperometric detection

A method based on capillary electrophoresis with amperometric detection has been developed for the determination of luteolin, chlorogenic acid, 3,5-dicaffeoylquinic acid and caffeic acid in the dried flower buds, leaves and stems (three medicinal parts) of Lonicera confusa DC., respectively. The effects of several important factors such as detection potential, the concentration of the running buffer, separation voltage and injection time were investigated to acquire the optimum conditions. The detection electrode was a 300 microm diameter carbon disc electrode at a working potential of + 0.90 V (vs saturated calomel electrode). The four analytes can be well separated within 10 min in a 40 cm-long fused silica capillary at a separation voltage of 12 kV in a 50 mM borate-25 mM phosphate buffer (pH 8.0). The relationship between peak current and analyte concentration was linear over about 3 orders of magnitude with detection limits (S/N = 3) ranging from 0.35 to 0.52 microM for all analytes. The proposed method has been successfully applied to the monitoring of bioactive constituents in the real plant samples with satisfactory assay results.     

Facile Nonenzymatic Glucose Electrode Composed of Commercial CuO Powder and Ionic Liquid Binder

Commercially available micro-sized CuO powder was dispersed in the mixture of ethanol and protonated betaine bis((trifluoromethyl)sulfonyl)amide ([Hbet][TFSA]), a hydrophobic amide-type protic ionic liquid (IL), to prepare a composite paste for the modification of screen-printed carbon electrode (SPCE) via spin-coating. The fabricated SPCE\CuO−IL composite-based electrode showed a comparable activity as that of the nanonized metal-oxide based electrodes towards the electrochemical oxidation of glucose in alkaline solutions. Hydrodynamic chronoamperometry tests performed at +0.55 V showed a linear dynamic response of the electrode over the concentration range of 1 μM–2.8 mM with a sensor-sensitivity of 0.16 μA μM⁻¹ in 0.1 M NaOH. The data also showed a linear dynamic response over the concentration range of 1 μM–4.6 mM with a sensor-sensitivity of 0.10 μA μM⁻¹ in 0.1 M NaOH with 0.1 M NaCl, indicating that the major interferant Cl⁻ had negligible effects on glucose detection . Ascorbic acid (AA) (in the physiological level) and ethanol also did not interfere with the detection. Detection of glucose in real samples showed the recovery ratios higher than 95 %. This study has clearly demonstrated that commercial CuO powder without nanostructure can provide sufficient reactivity to the electrocatalytic oxidation of glucose by using IL as the organic binder. Facile preparation of the micro-sized metal oxide-modified electrodes can be accordingly pursued.     

Microchip capillary electrophoresis with electrochemical detector for precolumn enzymatic analysis of glucose, creatinine, uric acid and ascorbic acid in urine and serum

An integrated multiple-enzymatic assay was performed on a (microchip capillary electrophoresis) μCE-EC chip capable of precise intake of sample or reagents in nanoliters. Incorporating multiple-enzyme assay into the μCE chip is relatively new—rendering simultaneous analysis of creatinine and uric acid a snap.Added to the list of merits in this study are the enhanced sensitivity down to 1 μM and a broader spectrum of analytes—inclusive of glucose for the long-time sufferers of diabetes. The performance was orchestrated to attain the claimed level: employing the end-channel electrode mode to tame the noises and the precolumn enzymatic reaction to stabilize the baseline. The 10 μm embedded Pt electrode, deposited at the end of the 30 μm wide separation channel, benefited chip fabrication besides noise reduction. The optimized conditions were 20 mM phosphate buffer (pH 7.5), +1.5 kV separation voltage and +1.0 V detection potential (versus Ag/AgCl). The migration time was repeatable within the deviation of 0.5% R.S.D. (n=7), but the peak currents ranged from 1.5 to 2.2% R.S.D. The detection limits (S/N=3) ranged from 0.71 μM for ascorbic acid to 10 μM for glucose. The calibration curve was linear from 10 to 800 μM (R²>0.995). Glucose, creatinine, uric acid and ascorbic acid as model analytes, in pure form or in serum and urine samples, were tested to verify its feasibility.     

Determination of chlorpheniramine and its binding with human serum albumin by capillary electrophoresis with tris(2,2'-bipyridyl)ruthenium(II) electrochemiluminescence detection.

Tris(2,2'-bipyridyl)ruthenium(II) electrochemiluminescence (ECL) detection in a capillary electrophoresis separation system was used for the determination of chlorpheniramine (CPM). The experimental conditions, such as the applied potential, separation voltage, injection voltage, injection time and the pH of the separation buffer were considered in detail. The ECL intensity showed two linear responses to CPM, i.e., from 15 microM to 1 mM and from 0.8 microM to 15 microM with a detection limit of 0.5 microM. The binding of CPM with human serum albumin was also monitored using this method and the binding constant was estimated to be 4.1 x 103 M(-1).     

Electrocatalytic Reduction of H2O2 and Oxygen on the Surface of Thionin Incorporated onto MWCNTs Modified Glassy Carbon Electrode: Application to Glucose Detection

A new H₂O₂ enzymeless sensor has been fabricated by incorporation of thionin onto multiwall carbon nanotubes (MWCNTs) modified glassy carbon electrode. First 50 μL of acetone solution containing dispersed MWCNTs was pipetted onto the surface of GC electrode, then, after solvent evaporations, the MWCNTs modified GC electrode was immersed into an aqueous solution of thionin (electroless deposition) for a short period of time <5–50 s. The adsorbed thin film of thionin was found to facilitate the reduction of hydrogen peroxide in the absence of peroxidase enzyme. Also the modified electrode shows excellent catalytic activity for oxygen reduction at reduced overpotential. The rotating modified electrode shows excellent analytical performance for amperometric determination of hydrogen peroxide, at reduced overpotentials. Typical calibration at ?0.3 V vs. reference electrode, Ag/AgCl/3 M KCl, shows a detection limit of 0.38 μM, a sensitivity of 11.5 nA/μM and a liner range from 20 μM to 3.0 mM of hydrogen peroxide. The glucose biosensor was fabricated by covering a thin film of sol–gel composite containing glucose oxides on the surface of thionin/MWCNTs modified GC electrode. The biosensor can be used successfully for selective detection of glucose based on the decreasing of cathodic peak current of oxygen. The detection limit, sensitivity and liner calibration rang were 1 μM, 18.3 μA/mM and 10 μM–6.0 mM, respectively. In addition biosensor can reach 90% of steady currents in about 3.0 s and interference effect of the electroactive existing species (ascorbic acid–uric acid and acetaminophen) is eliminated. The usefulness of biosensor for direct glucose quantification in human blood serum matrix is also discussed. This sensor can be used as an amperometric detector for monitoring oxidase based biosensors.     

毛细管电泳-电化学检测法测定黄芪及其制剂中的活性成分

采用毛细管电泳-电化学检测法(CE-ED)对中药黄芪的主要活性成分芦丁、阿魏酸、香草酸、绿原酸、槲皮素和咖啡酸进行了分离和测定。分别考察了工作电极电位、运行缓冲液的pH值和浓度、分离电压和进样时间等实验参数对实验结果的影响。在优化的实验条件下,以直径300 μm的碳圆盘电极为工作电极,检测电位为+0.95 V(相对于饱和甘汞电极),在10 mmol/L硼酸盐(pH 8.2)的运行缓冲溶液中,上述6种活性成分能在17 min内实现很好的基线分离,被测物浓度与峰电流在3个数量级范围呈良好的线性关系,检出限(S/N=3)范围为78～110 μg/L。在不同的加标水平下,6种活性成分的平均回收率为96.0%～103.0%,相对标准偏差为1.9%～3.6%(n=3)。该方法样品处理简单,无需预富集,已应用于实际样品的分析,并获得了令人满意的结果。     

Separation of natural antioxidants using PDMS electrophoresis microchips coupled with amperometric detection and reverse polarity

This report describes the use of PDMS ME coupled with amperometric detection for rapid separation of ascorbic, gallic , ferulic, p‐coumaric acids using reverse polarity. ME devices were fabricated in PDMS by soft lithography and detection was accomplished using an integrated carbon fiber working electrode aligned in the end‐channel configuration. Separation and detection parameters were investigated and the best conditions were obtained using a run buffer consisting of 5 mM phosphate buffer (pH 6.9) and a detection voltage of 1.0 V versus Ag/AgCl reference electrode. All compounds were separated within 70 s using gated injection mode with baseline resolution and separation efficiencies between 1200 and 9000 plates. Calibration curves exhibited good linearity and the LODs achieved ranged from 1.7 to 9.7 μM. The precision for migration time and peak height provided maximum values of 4% for the intrachip studies. Lastly, the analytical method was successfully applied for the analysis of ascorbic and gallic acids in commercial beverage samples. The results achieved using ME coupled with amperometric detection were in good agreement with the values provided by the supplier. Based on the data reported here, the proposed method shows suitability to be applied for the routine analysis of beverage samples.     

Far infrared-assisted extraction followed by MEKC for the simultaneous determination of flavones and phenolic acids in the leaves of Rhododendron mucronulatum Turcz

A method based on micellar electrokinetic chromatography with amperometric detection and far infrared‐assisted extraction has been developed for the simultaneous determination of two flavones (rutin and farrerol) and three phenolic acids (syringic acid, vanillic acid, and 4‐hydroxybenzoic acid) in the dried leaves of Rhododendron mucronulatum Turcz., a commonly used traditional Chinese medicine. The effects of some important factors such as the voltage applied on the infrared generator, irradiation time, the concentration of borate and sodium dodecylsulfate (SDS), separation voltage, and detection potential were investigated to acquire the optimum conditions. The detection electrode was a 300‐μm diameter carbon disc electrode. The five analytes could be well separated within 8 min in a 40 cm‐long capillary at a separation voltage of 12 kV in a 50 mM borate buffer (pH 9.2) containing 50 mM SDS. The relationship between peak current and analyte concentration was linear over about three orders of magnitude with the detection limits (S/N=3) ranging from 0.20 to 0.46 μM. The results indicated that far infrared irradiations significantly enhanced the extraction efficiency. The extraction time was substantially reduced to 6 min compared with 3 h for conventional hot solvent extraction.     

Rapid analysis of anthracycline antibiotics doxorubicin and daunorubicin by microchip capillary electrophoresis

A simple and rapid method has been developed for the analysis of anthracycline antibiotics doxorubicin (DOX) and daunorubicin (DAU) in human serum using mirochip-based capillary electrophoresis (CE) with laser-induced fluorescence (LIF) detection. In this study, method development included studies of the effect of buffer pH, buffer concentration, organic solvents and separation voltage on sensitivity and separation efficiencies for the CE separation of DOX and DAU. Acetonitrile was found to have significantly improved the sensitivity and separation efficiency. The method was validated with regard to reproducibilities, linearity and limit of detection (LOD). The optimum electrophoretic separation conditions were 10 mM sodium tetraborate buffer at pH 9.5 with 40% acetonitrile (V/V) and a separation voltage of 2.1 kV. DOX and DAU were separated in 60 s under the optimum separation conditions. Linear relationships were obtained between the concentration and peak area (or peak height) in the 1–75 µg mL^{− 1} range and with the detection limits of 0.3 and 0.2 μg mL^{− 1} for DOX and DAU, respectively. The stability of both migration time and peak height of the analytes showed relative standard deviations of less than 5% (n = 9). The potential of this method was verified by spiking a human serum sample with the two drugs and analyzing the recovery ratios.