The role of additional solvents in transition metal complex catalyzed asymmetric reductions in ionic liquid containing systems

When ionic liquids (ILs) are employed as solvents for transition metal complex (TMC) catalyzed reductions, a second solvent can be added to increase the efficiency of the catalytic cycle and the solubility of the reactant in the IL phase. Two industrially relevant asymmetric hydrogenations, the enantioselective reductions of methyl 2-acetamidoacrylate with Rh-EtDuPHOS and methyl acetoacetate with Ru-BINAP, were performed in different catalytic systems including 1-butyl-3-methylimidazolium hexafluorophosphate/ tetrafluoroborate as ILs. Product separation and TMC recycling was performed by extracting the product from the reaction mixture. This can be accomplished by cooling the system, by adding an excess of the second solvent or by adding a third solvent. A high solubility of the second solvent in the IL catalytic phase favors the reaction activity, but can induce leaching of the IL and TMC.     

Liquid-vapor equilibrium of the systems butylmethylimidazolium nitrate-CO2 and hydroxypropylmethylimidazolium nitrate-CO2 at high pressure: influence of water on the phase behavior

Ionic liquids (IL) are receiving increasing attention due to their potential as "green" solvents, especially when used in combination with SC-CO2. In this work liquid-vapor equilibria of binary mixtures of CO2 with two imidazolium-based ionic liquids (IL) with a nitrate anion have been experimentally determined: butylmethylimidazolium nitrate (BMImNO3) and hydroxypropylmethylimidazolium nitrate (HOPMImNO3), using a Cailletet apparatus that operates according to the synthetic method. CO2 concentrations from 5 up to 30 mol % were investigated. It was found that CO2 is substantially less soluble in HOPMImNO3 than in BMImNO3. Since these ILs are very hygroscopic, water easily can be a major contaminant, causing changes in the phase behavior. In case these Ils are to be used in practical applications, for instance, together with CO2 as a medium in supercritical enzymatic reactions, it is very important to have quantitative information on how the water content will affect the phase behavior. This work presents the first systematic study on the influence of water on the solubility of carbon dioxide in hygroscopic ILs. It was observed that the presence of water reduces the absolute solubility of CO2. However, at fixed ratios of CO2/IL, the bubble point pressure remains almost unchanged with increasing water content. In order to explain the experimental results, the densities of aqueous mixtures of both ILs were determined experimentally and the excess molar volumes calculated.     

Novel Catalytic CO(2) Incorporation Reaction: Nickel-Catalyzed Regio- and Stereoselective Ring-Closing Carboxylation of Bis-1,3-dienes

Novel nickel-catalyzed carboxylation of bis-1,3-dienes using carbon dioxide (CO2) was investigated. In the presence of catalytic amounts of Ni(acac)2 and PPh3, various bis-1,3-dienes smoothly reacted with CO2 and an organozinc reagent (Et2Zn, Me2Zn, or Ph2Zn) under mild conditions. This catalytic carboxylation process was accompanied by carbocyclization of bis-1,3-diene followed by alkylation by an organozinc reagent to afford cyclic carboxylic acid derivatives in high yields with high regio- and stereoselectivities.     

Efficient Lewis acid ionic liquid-catalyzed synthesis of the key intermediate of coenzyme Q10 under microwave irradiation

An efficient synthesis of a valuable intermediate of coenzyme Q(10) by microwave-assisted Lewis acidic ionic liquid (IL)-catalyzed Friedel-Crafts alkylation is reported. The acidity of six [Etpy]BF(4)-based ionic liquids was characterized by means of the FT-IR technique using acetonitrile as a molecular probe. The catalytic activities of these ionic liquids were correlated with their Lewis acidity. With increasing Lewis acid strength of the ionic liquids, their catalytic activity in the Friedel-Crafts reaction increased, except for [Etpy]BF(4)-AlCl(3). The effects of the reaction system, the molar fraction of Lewis acid in the Lewis acid ILs and heating techniques were also investigated. Among the six Lewis acid ionic liquids tested [Etpy]BF(4)-ZnCl(2) showed the best catalytic activity, with a yield of 89% after a very short reaction time (150 seconds). This procedure has the advantages of higher efficiency, better reusability of ILs, energy conservation and eco-friendliness. The method has practical value for preparation of CoQ(10) on an industrial scale.     

Highly Efficient Carbon Monoxide Capture by Carbanion-Functionalized Ionic Liquids through C-Site Interactions

A novel method for the highly efficient and reversible capture of CO in carbanion-functionalized ionic liquids (ILs) by a C-site interaction is reported. Because of its supernucleophilicity, the carbanion in ILs could absorb CO efficiently. As a result, a relatively high absorption capacity for CO (up to 0.046 mol mol⁻¹) was achieved under ambient conditions, compared with CO solubility in a commonly used IL [Bmim][Tf₂N] (2×10⁻³ mol mol⁻¹). The results of quantum mechanical calculations and spectroscopic investigation confirmed that the chemical interaction between the C-site in the carbanion and CO resulted in the superior CO absorption capacities. Furthermore, the subsequent conversion of captured CO into valuable chemicals with good reactivity was also realized through the alkoxycarbonylation reaction under mild conditions. Highly efficient CO absorption by carbanion-functionalized ILs provides a new way of separating and converting CO.     

含膦和含氮配体功能化离子液体中 RuCl3•3H2O 催化分子氧氧化醇

 无共氧化剂参与条件下, 以氧气为氧化剂, 在含膦或含氮配体功能化离子液体和普通离子液体 (溶剂) 组成的混合体系中, RuCl3•3H2O 能有效催化多种醇的选择氧化, 高选择性地生成相应的醛或酮. 其中, 配位能力较弱的含氮配体功能化离子液体更有利于提高钌催化剂的活性和选择性, 但体系无法有效实现钌催化剂的循环使用. 配体功能化离子液体本身的氧化降解是导致钌催化剂失活的根本原因.     

Highly Efficient Carbon Monoxide Capture by Carbanion‐Functionalized Ionic Liquids through C‐Site Interactions

A novel method for the highly efficient and reversible capture of CO in carbanion‐functionalized ionic liquids (ILs) by a C‐site interaction is reported. Because of its supernucleophilicity, the carbanion in ILs could absorb CO efficiently. As a result, a relatively high absorption capacity for CO (up to 0.046 mol mol⁻¹) was achieved under ambient conditions, compared with CO solubility in a commonly used IL [Bmim][Tf₂N] (2×10⁻³ mol mol⁻¹). The results of quantum mechanical calculations and spectroscopic investigation confirmed that the chemical interaction between the C‐site in the carbanion and CO resulted in the superior CO absorption capacities. Furthermore, the subsequent conversion of captured CO into valuable chemicals with good reactivity was also realized through the alkoxycarbonylation reaction under mild conditions. Highly efficient CO absorption by carbanion‐functionalized ILs provides a new way of separating and converting CO.     

Autooxidation of hydrocarbons with oxygen in ionic liquids as solvents

The results of hydrocarbons autooxidation process carried out using several ionic liquids (IL) as solvents are demonstrated. Test studies to check the influence of ILs on this process showed that most ILs can accelerate the initiation rate of autooxidation. The results could be very useful for choosing an IL not only for autooxidation processes but also for catalytic oxidation systems. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 40: 287–293, 2008     

Improved activity of horseradish peroxidase (HRP) in ‘specifically designed’ ionic liquid

The ionic liquid (IL), tetrakis (2-hydroxyethyl) ammonium triflouromethanesulfonate is rationally designed for horseradish peroxidase (HRP) on the basis of its stability and activity in the presence of an excipient, tris(hydroxymethyl)aminoethane (TRIS) in different ILs. The activity of HRP in this tailor made IL is at least 30-240-fold higher than that in conventional ILs. Also, the activity is more than 10 times greater than that in methanol, a common organic solvent used for HRP.     

Metal-organic framework supported ionic liquid membranes for CO2 capture: anion effects

IRMOF-1 supported ionic liquid (IL) membranes are investigated for CO(2) capture by atomistic simulation. The ILs consist of identical cation 1-n-butyl-3-methylimidazolium [BMIM](+), but four different anions, namely hexafluorophosphate [PF(6)](-), tetrafluoroborate [BF(4)](-), bis(trifluoromethylsulfonyl)imide [Tf(2)N](-), and thiocyanate [SCN](-). As compared with the cation, the anion has a stronger interaction with IRMOF-1 and a more ordered structure in IRMOF-1. The small anions [PF(6)](-), [BF(4)](-), and [SCN](-) prefer to locate near to the metal-cluster, particularly the quasi-spherical [PF(6)](-) and [BF(4)](-). In contrast, the bulky and chain-like [BMIM](+) and [Tf(2)N](-) reside near the phenyl ring. Among the four anions, [Tf(2)N](-) has the weakest interaction with IRMOF-1 and thus the strongest interaction with [BMIM](+). With increasing the weight ratio of IL to IRMOF-1 (W(IL/IRMOF-1)), the selectivity of CO(2)/N(2) at infinite dilution is enhanced. At a given W(IL/IRMOF-1), the selectivity increases as [Tf(2)N](-) < [PF(6)](-) < [BF(4)](-) < [SCN](-). This hierarchy is predicted by the COSMO-RS method, and largely follows the order of binding energy between CO(2) and anion estimated by ab initio calculation. In the [BMIM][SCN]/IRMOF-1 membrane with W(IL/IRMOF-1) = 1, [SCN](-) is identified to be the most favorable site for CO(2) adsorption. [BMIM][SCN]/IRMOF-1 outperforms polymer membranes and polymer-supported ILs in CO(2) permeability, and its performance surpasses Robeson's upper bound. This simulation study reveals that the anion has strong effects on the microscopic properties of ILs and suggests that MOF-supported ILs are potentially intriguing for CO(2) capture.     

Sequential protocol for C(sp3)-H carboxylation with CO2: transition-metal-catalyzed benzylic C-H silylation and fluoride-mediated carboxylation

One of the most challenging transformations in current organic chemistry is the catalytic carboxylation of a C(sp(3))-H bond using CO(2) gas, an inexpensive and ubiquitous C1 source. A sequential protocol for C(sp(3))-H carboxylation by employing a nitrogen-directed, metal-assisted, C-H activation/catalytic silylation reaction in conjunction with fluoride-mediated carboxylation with CO(2) was established. The carboxylation proceeded only at the benzylic C(sp(3))-Si bond, not at the aromatic C(sp(2))-Si, which is advantageous for further manipulations of the products.     

Fast catalytic epoxidation with H(2)O(2) and [gamma-SiW(10)O(36)(PhPO)(2)](4-) in ionic liquids under microwave irradiation

Olefin epoxidation by [gamma-SiW10O36(PhPO)2]4- and H2O2 occurs in hydrophobic ionic liquids (ILs), with yields and selectivity up to >99%. The catalytic IL phase is recyclable. Under MW irradiation the reaction occurs with up to 200 turnovers per minute. Simultaneous cooling is instrumental for quantitative H2O2 conversion.     

Interactions of 1-butyl-3-methylimidazolium carboxylate ionic liquids with glucose in water: a study of volumetric properties, viscosity, conductivity and NMR

Extensive applications of ionic liquids (ILs) may result in their accumulation in the ecological environment and organisms. Although ILs are popularly called "green solvents", their toxicity, in fact, has been exhibited. Therefore the interaction of ILs with biomolecules is a cutting-edge research subject. Herein, the interactions of 1-butyl-3-methylimidazolium carboxylate ionic liquids ([C(4)mim][HCOO], [C(4)mim][CH(3)COO] and [C(4)mim][CH(3)CH(2)COO]) with glucose in water were studied for their volumetric properties, viscosity, conductivity and NMR spectra. Limiting apparent molar volumes (V(Φ, IL)(0)), viscosity B-coefficients, limiting molar conductivities (Λ(0)) and Walden products (Λ(0)η(0)) were evaluated for the ILs in glucose + water solutions. Volumetric interaction parameters were also obtained from the transfer volumes of the ionic liquids. The contributions of the solvent properties (B(1)) and the ionic liquid-solvent interactions (B(2)) to the B-coefficient were extracted, together with molar activation energies (Δμ(IL)(0≠)) of the ionic liquids for viscous flow of the aqueous glucose + IL solution. In addition, the (13)C and (1)H NMR spectra of methyl β-D-glucopyranoside and ILs in β-D-glucopyranoside + IL + D(2)O were studied. The NMR results show that no special and strong interactions were observed between glucopyranoside and the ILs. However, it was confirmed that the H2 on the imidazolium ring has more activity (acidity) than atoms H4 and H5. The macro-properties and their changes were also discussed in terms of the size, structure and solvation of the ILs and glucose.     

离子液体功能化金属/共价-有机框架材料在催化反应中应用

离子液体（ILs）功能化的金属有机框架（MOFs）和共价有机框架（COFs）材料兼具离子液体和MOFs/COFs的优点，是一种极具潜力的复合催化材料。MOFs和COFs材料固定的孔结构及较大的比表面积为负载高分散催化中心提供了天然的物理空间；多孔结构促使催化剂与反应物充分接触；丰富的孔道有利于运输催化反应底物和产物，进而实现催化反应的高效进行。特别是离子液体片段的引入，可以作为催化活性中心的配体（稳定剂）或分散剂，同时能够有效改善MOFs和COFs材料孔道和活性中心周围的微环境。此外，还可以充分利用离子液体片段在适当的反应条件下转化为氮杂环卡宾配体的特点，在MOFs和COFs材料中引入氮杂环卡宾有机金属配合物。因此，我们对近几年来离子液体功能化的MOFs或COFs催化体系在CO2环加成、CO2还原、C-C偶联、羰基化以及其它有机转化反应中的研究应用进行简要综述。并对复合材料在催化领域的发展进行总结和展望。     

Low temperature ionic conductor: ionic liquid incorporated within a metal–organic framework

Ionic liquids (ILs) show promise as safe electrolytes for electrochemical devices. However, the conductivity of ILs decreases markedly at low temperatures because of strong interactions arising between the component ions. Metal–organic frameworks (MOFs) are appropriate microporous host materials that can control the dynamics of ILs via the nanosizing of ILs and tunable interactions of MOFs with the guest ILs. Here, for the first time, we report on the ionic conductivity of an IL incorporated within a MOF. The system studied consisted of EMI-TFSA (1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide) and ZIF-8 (Zn(MeIM)₂, H(MeIM) = 2-methylimidazole) as the IL and the MOF, respectively. While the ionic conductivity of bulk EMI-TFSA showed a sharp decrease arising from freezing, the EMI-TFSA@ZIF-8 showed no marked decrease because there was no phase transition. The ionic conductivity of EMI-TFSA@ZIF-8 was higher than that of bulk EMI-TFSA below 250 K. This result points towards a novel method by which to design electrolytes for electrochemical devices such as batteries that can operate at low temperatures.     

关于限域离子液体吸附CO_2的密度泛函理论(DFT)的研究

近年来,温室效应日趋严重,因此吸收CO_2的材料受到了广泛的关注.采用了密度泛函理论(DFT)研究以SiO_2为载体的限域离子液体对CO_2的吸附.对比纯净离子液体(ILs)以及限域离子液体与CO_2的相互作用情况,在这两种状态下两种体系的吸附情况大不相同.从几何结构、相互作用以及电荷分析等方面对ILs、 SiO_2以及ILs/SiO_2复合结构进行研究.计算结果表明,载体、离子液体和CO_2之间都存在较强的相互作用.离子液体的负载不仅改变了SiO_2载体的结构,而且受载体的影响阴阳离子之间的相互作用力也发生了改变.计算结果为进一步深入限域离子液体对CO_2的吸附打下了理论基础.     

Enantioselective hydrogenation of imines in ionic liquid/carbon dioxide media

The enantioselective hydrogenation of N-(1-phenylethylidene)aniline using cationic iridium complexes with chiral phosphinooxazoline ligands was studied as a chemical probe to assess the potential of ionic liquid/carbon dioxide (IL/CO2) media for, multiphase catalysis. The biphasic system leads to activation, tuning, and immobilization of the catalyst that would be impossible in classical organic solvent systems or in either of the two unconventional media separately. In particular it is demonstrated that (i) the presence of CO2 can be beneficial or even mandatory for efficient hydrogenation in the IL; (ii) the precursor is activated in the IL by anion exchange allowing one to use in situ catalysts; (iii) the anion of the IL greatly influences the selectivity of the catalyst; (iv) the products are readily isolated from the catalyst solution by CO2 extraction without cross contamination of IL or catalyst; and (v) the IL leads to enhanced stability of the catalyst. These results are corroborated and rationalized on the basis of the physicochemical properties of the biphasic medium and the chemical characteristics of the catalytic systems.     

Tuning the selectivity of ruthenium nanoscale catalysts with functionalised ionic liquids: Hydrogenation of nitriles

Ruthenium nanoparticles prepared in nitrile-functionalised ionic liquids (ILs) display unusual selectivities toward the hydrogenation of nitrile containing aromatic compounds. In particular, a selective catalytic hydrogenative coupling of nitriles was observed. In this transformation, nitrile groups are exclusively hydrogenated in the presence of arenes, which are typically hydrogenated by ruthenium nanoparticles in non-functionalised ILs. The catalyst material was characterised by means of TEM and EDS analysis. Furthermore, molecular species formed during the catalytic process were characterised by MS-analysis of the gaseous phase and the ionic liquid phase by ESI/MS Q-TOF.     

Homogeneous enzymatic reactions in ionic liquids with poly(ethylene glycol)-modified subtilisin

Subtilisin Carlsberg was covalently modified with comb-shaped poly(ethylene glycol) (PM13). PM13-modified subtilisin (PM13-Sub) was readily solubilized in three different ionic liquids (ILs), i.e., [Emim][Tf2N], [C2OC1mim][Tf2N] and [C2OHmim][Tf2N]. Analysis of homogeneous enzymatic reactions in the ILs revealed that PM13-Sub exhibited excellent catalytic performance while the native enzyme suspended in ILs showed no activity. Hydrophobicity of ILs slightly affected enzyme activity, and the relatively hydrophobic IL [Emim][Tf2N] was the preferred medium for enzymatic reactions, similar to enzymatic reactions in conventional organic solvents. Enzyme activity was much higher in [Emim][Tf2N] than in conventional organic solvents, and excellent activity was associated with unique properties of ILs such as hydrophobicity and high polarity. Furthermore, PM13-Sub showed good stability in [Emim][Tf2N], and maintained 80% of its initial activity after 60 h.     

基于离子液体固定二氧化碳的研究进展

综述了不同种类离子液体吸收固定CO2的研究进展,从离子液体的结构和分子模拟结果探讨了离子液体吸收CO2的机理及特征,展望了功能化离子液体在固定CO2方面的应用前景并分析了其在工业应用中存在的问题.