Comparative study between novel self cross-linking and conventional fluorinated acrylic latex

Novel self cross-linking fluorinated acrylic latex(SCLFAL) has been successfully prepared via starved seeded semi-batch emulsion polymerization.The resultant SCLFAL is characterized by Fourier transform infrared(FTIR) spectrometry.Contact angle (CA) and glass transition temperature(T_g) of the film are investigated.Results show that CA and T_g of the film can be improved when the moderate amount of HPMA is introduced into the mixed monomers.     

Interaction between light and crystallizing polymer: a simulation study

A study of light transmission through a crystallizing polymer has been carried out by graphic simulations, consisting of sporadic and pre-determinate nucleation and growth of disks (spherulites) in a rectangular area. Interaction between a light beam crossing a sample of polymer has been described by a series of simple graphical rules, accounting for both absorption and scattering. Results of the code well reproduce the experimental behavior observed in the literature of main beam light intensity emerging from a crystallizing polymer sample and allows a better understanding of the interaction between light and nucleating/growing units. Emerging light behavior calculated by the simulation has been adopted as the basis to suggest the dependence of the light scattering coefficient upon crystallization kinetic parameters.     

Coupling between the convergence behavior of basis set and electron correlation: a quantitative study

The coupling between improvement of the basis set and the valence electron correlation method has been studied quantitatively for the total atomization energies (TAEs) of a number of small molecules, using basis sets of up to [7s6p5d4f3g2h/5s4p3d2f1g] quality. Very significant coupling is found to exist. Using a scaled basis set extrapolation beyond [6s5p4d3f2g/ 4s3p2d1f] at the MP2 or CCSD level, mean absolute errors of 0.18 and 0.15 kcal/mol, respectively, can be obtained for the TAEs of a number of small polyatomic molecules, compared to 0.12 kcal/mol using CCSD(T) throughout. Received: 7 February 1997 / Accepted: 6 May 1997     

Kinetic study of the reaction between iodide and N-chloramines

We carried out a kinetic study of the reaction between iodide ion and various primary N-chloramines and found it to be first-order in the latter. Experiments also showed the rate constant for the reaction to be directly proportional to the iodide and hydrogen ion concentrations. The influence of the buffer concentration reveals the presence of general acid catalysis processes. © 1996 John Wiley & Sons, Inc.     

Effect of different surfactants on colloidal and polymer properties of fluorinated acrylate latex

Fluorinated acrylate latex was successfully prepared by semi-continuous seeded emulsion polymerization of dodecafluoroheptyl methacrylate (DFMA) with butyl acrylate (BA), methyl methacrylate (MMA) initiated by potassium persulfate in the water. The resultant latexes and their films are characterized with Fourier transform infrared (FTIR) spectrometry, contact angle determinator, dynamic light scattering detector and surface tension determinator. Effect of different surfactants on colloidal and polymer properties of fluorinated acrylate latex was studied. Results show that the latex prepared with sodium dodecyl benzene sulfonate surfactant has the smallest particle size and contact angle but the moderate surface tension. The latex prepared with perfluorooctanesulfonic acid potassium surfactant has the smallest surface tension, moderate particle size but the biggest contact angle. The latex prepared with sodium 2-hydroxy-3-(methacryloyloxy) prop- ane-1-sulfonate surfactant has the biggest particle size and surface tension but moderate contact angle. In addition, the latex prepared with sodium 2-hydroxy-3-(methacryloyloxy) prop- ane-1-sulfonate has higher electrolyte stability.     

DFT study on mechanism of the classical Biginelli reaction

The condensation of benzaldehyde, urea, and ethyl acetoacetate according to the procedure described by Biginelli was investigated at the B3LYP/6-31G（d）, B3LYP/6-31 ＋G（d,p）, and B3LYP/6-311＋G（3df,2p）//B3LYP/6-31＋G（d,p） levels to explore the reaction mechanism. According to the mechanism proposed by Kappe, structures of five intermediates were optimized and four transition states were found. The calculation results proved that the mechanism proposed by Kappe is right.     

Complexation mechanism of olefin with silver ions dissolved in a polymer matrix and its effect on facilitated olefin transport

Remarkable separation performance of olefin/paraffin mixtures was previously reported by facilitated olefin transport through silver-based polymer electrolyte membranes. The mechanism of facilitated olefin transport in solid membranes of AgCF3SO3 dissolved in poly(N-vinyl pyrrolidone) (PVP) is investigated. In silver polymer electrolyte membranes, only free anions are present up to the 2:1 mole ratio of [C=O]:[Ag], and ion pairs start to form at a ratio of 1:1, followed by higher-order ionic aggregates above a ratio of 1:2. At silver concentrations above 3:1, the propylene permeance increases almost linearly with the total silver concentration, unexpectedly, regardless of the silver ionic constituents. It was also found that all the silver constituents, including ion pairs and higher order ionic aggregates, were completely redissolved into free anions under the propylene environment; this suggests that propylene can be a good ligand for the silver cation. From these experimental findings, a new mechanism for the complexation reaction between propylenes and silver salts in silver-polymer electrolytes was proposed. The new mechanism is consistent with the linearity between the propylene permeance and the total silver concentration regardless of the kind of the silver constituents. Therefore, the facilitated propylene transport through silver-polymer electrolytes may be associated mainly with the silver cation weakly coordinated with both carbonyl oxygen atoms and propylene.     

Insights into the reaction mechanism between propadienylidene and ethylene: a DFT study

The reaction mechanism between propadienylidene and ethylene has been systematically investigated employing the B3LYP/6-311++G** and MP2/cc-pVTZ levels of theory to better understand the reactivity of propadienylidene with unsaturated hydrocarbons. Geometry optimization, vibrational analysis, and energy property for the involved stationary points on the potential energy surface have been calculated. Two important initial reaction complexes characterized by three- and four-membered ring structures have been located firstly. After that, three different products possessing three-, four-, and five-membered ring characters have been obtained through three reaction pathways. In the first reaction pathway, a three-membered ring alkyne compound has been obtained. As for the second reaction pathway, it is a diffusion-controlled reaction, resulting in the formation of the four-membered ring conjugated diene compound. A five-membered conjugated diene compound has been obtained in the third reaction pathway, which is the most stable product in the available products thermodynamically. On the other hand, the second reaction pathway is the most favorable reaction to proceed kinetically.     

Experimental design and the optimization of a polymer supported palladium complex for use in the Heck reaction

Optimization of the Heck reaction of 4-bromoacetophenone with styrene by a polymer supported, sulfur-containing palladacycle, varying 6 factors at a total of 28 different levels, corresponding to 5760 different possibilities was undertaken. Conversion improved from 34%, with large observable leaching to 88% with no leaching. This was accomplished using a Design of Experiments approach facilitated by the Statistical Design Package, MODDE 7.0^TM.     

Thermogravimetric analysis of SPEEK membranes: Thermal stability, degree of sulfonation and cross-linking reaction

Thermal degradation of SPEEK membranes is studied by coupling thermogravimetric analysis (TGA) and mass spectrometry (MS). Main mass losses can be attributed to water evaporation, desulfonation and oxidative pyrolysis of polymer main chain. The analysis can be used to determine the degree of sulfonation (DS) and the degree of cross-linking (DCL) between macromolecular chains. Furthermore, the thermogravimetric curves can be modelled using non-isothermal chemical kinetics, allowing determination of activation energies during thermal degradation of SPEEK membranes.     

MNDO/PM3 study of the mechanism of a model reaction between methane and Br+ cation

The structure of complexes formed in the [CH₄+Br⁺] system was simulated by the MNDO/PM3 method. Along with five local minima, a number of stationary points at which the Hessians have only one negative eigenvalue were found on the potential energy surface of reactions occurring in the [CH₄+Br⁺] system. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1715–1718, September, 1998.     

Synthesis and characterization of shell-cross-linked polymer networks and large-core star polymers: Effect of the volume of the cross-linking mixture

Group transfer polymerization and sequential addition of monomer and cross-linker were employed for the preparation of two new polymer structures, one of a polymer network and the other of a star polymer. The synthesis was completed in two steps, involving the synthesis of linear methyl methacrylate (MMA) arms of degree of polymerization of 20, followed by their cross-linking using a mixture of MMA monomer and ethylene glycol dimethacrylate (EGDMA) cross-linker. In this study, the volume of the cross-linking mixture was varied systematically. Furthermore, two mixture compositions were employed, involving MMA:EGDMA molar ratios of 1:1 and 3:1, leading to two series of polymeric materials. It was found that at a given cross-linking mixture composition, a larger volume of the cross-linking mixture favored the formation of polymer networks, whereas a smaller volume favored the formation of star polymers. The linear precursors, the star polymers and the extractables from the polymer networks were characterized by gel permeation chromatography in tetrahydrofuran (THF). The absolute weight-average molecular weight, the number of arms and the hydrodynamic radii of the star polymers, as determined using static and dynamic light scattering in THF, respectively, and their average radii as determined by atomic force microscopy, increased as the volume of the cross-linking mixture increased. The gravimetrically measured degrees of swelling in THF, the network sol fraction and the percentage of branched polymer in the sol fraction decreased as the volume of the cross-linking mixture increased.     

Pitfall of an initial rate study: on the kinetics and mechanism of the reaction of periodate with iodide ions in a slightly acidic medium

The kinetics of the periodate-iodide reaction has a contradictory history dating back to almost a century. This reaction has been reinvestigated spectrophotometrically in the pH range 3.13-5.55 in both buffered (acetic acid/acetate) and unbuffered solution at T=25.0+/-0.1 degrees C with an I=0.5 M ionic strength. The spectra between 290 and 500 nm were recorded and the reaction was followed until at least 95% of one of the reactants was consumed. The stoichiometry has been found to be strongly dependent on pH, but the rate of the initial step is independent of pH within the pH range studied. An eight-step kinetic model is proposed with four fitted kinetic parameters to take all the important characteristics of the experimental curves into account. On the basis of the model, a perfect reconciliation of the previous contradictory results is presented. It is shown that the kinetic parameters obtained from the initial rate of formation of a product unavoidably leads to misinterpretation of the results in the case of a branching mechanism (and stoichiometry).     

A generation mechanism of triboelectricity due to the reaction of mechanoradicals with mechanoions which are produced by mechanical fracture of solid polymer

Mechanical fracture of solid polymer under vacuum at 77K can, in principle, produce both mechanoradicals and mechanoanions which are formed by homolytic and heterolytic scission of carbon-carbon bonds in the polymer main chain. The production of mechanoanions was claimed by a detection of tetracyanoethylene (TCNE) anion radical (TCNE^–), which was observed by electron spin resonance (ESR) spectroscopy using the electron trapping method with TCNE.A novel mechanism for generating triboelectricity is proposed. The charge carrer is an electron. The electron donor is the mechanoanion A^–, which is produced by heterolytic carbon-carbon bond scission of the main chain of polymer A. The electron acceptor is the mechanoradical B·, which is produced by homolytic carbon-carbon bond scission of the main chain of polymer B. Charge separation is due to an electron transfer from the mechanoanion to the mechanoradical when in contact. It is possible to speculate the sign of the charge induced by friction from the electron release potential of A^–, Pr(A^–), and the molecular electron affinity of B·, Ea(B·). The triboelectric series deduced from our mechanism is PMMA-PP-PE-PVDF-PTFE, in which polymers having a relatively low Pr(A^–) to high Pr(A^–) or polymers having a relatively low Ea(B·) to high Ea(B·) are arranged. This order is identical with well-known triboelectric series.Dedicated to Professor Hans-Henning Kausch on the occasion of his 60th birthday     

A structural study of EPDM networks--the influence of the crosslinking mode on their microscopic structure

This work was performed to examine the network characteristics obtained for a given elastomer when various curing modes are used. We focused on the crosslinking procedures by peroxide, electron beam irradiation and mixed treatment (peroxide + electron beam irradiation), applied to an ethylene-propylene type polymer. The changes on the network have been followed as a function of peroxide concentration and irradiation dose. The effect on the curing efficiency of both the presence of the antioxidant and the termonomer have been especially considered. The network heterogeneity has been addressed.     

Association reaction between SiH3 and H2O2: a computational study of the reaction mechanism and kinetics

The association reaction between silyl radical (SiH₃) and H₂O₂ has been studied in detail using high-level composite ab initio CBS-QB3 and G4MP2 methods. The global hybrid meta-GGA M06 and M06-2X density functionals in conjunction with 6-311++G(d,p) basis set have also been applied. To understand the kinetics, variational transition-state theory calculation is performed on the first association step, and successive unimolecular reactions are subjected to Rice–Ramsperger–Kassel–Marcus calculations to predict the reaction rate constants and product branching ratios. The bimolecular rate constant for SiH₃–H₂O₂ association in the temperature range 250–600 K, k(T) = 6.89 × 10^?13 T ^?0.163exp(?0.22/RT) cm³ molecule^?1 s^?1 agrees well with the current literature. The OH production channel, which was experimentally found to be a minor one, is confirmed by the rate constants and branching ratios. Also, the correlation between our theoretical work and experimental literature is established. The production of SiO via secondary reactions is calculated to be one of the major reaction channels from highly stabilized adducts. The H-loss pathway, i.e., SiH₂(OH)₂ + H, is the major decomposition channel followed by secondary dissociation leading to SiO.     

CH3S与CO反应机理的理论研究

在G3(MP2)//B3LYP/6-311 G(d,p)水平上,对CH3S自由基与CO气相反应的微观机理进行了理论研究.结果表明:该反应共存在3个反应通道,产物分别为CH3 OCS,CH2S HCO和CH2S HOC.由于形成产物CH3 OCS的活化势垒较低,因此为主要反应通道,这与实验观察到的结果是一致的.     

Statistics of polymer capture by a nanopore: A Brownian dynamics simulation study

We investigate the statistics of polymer capture by a nanopore using Brownian dynamics simulations. It is found that when the velocity flux is greater than a critical velocity flux, the capture picture is a random selection process, otherwise it tends to a statistical process governed by energetic considerations. In addition, the chain ends capture probability decreases as the chain length increases and satisfies a power-law scaling of P0(N)~N-0.8.     

Theoretical study on the gas-phase reaction mechanism between palladium monoxide and methane

The gas-phase reaction mechanism between palladium monoxide and methane has been theoretically investigated on the singlet and triplet state potential energy surfaces (PESs) at the CCSD(T)/AVTZ//B3LYP/6-311+G(2d, 2p), SDD level. The major reaction channel leads to the products PdCH(2) + H(2)O, whereas the minor channel results in the products Pd + CH(3)OH, CH(2)OPd + H(2), and PdOH + CH(3). The minimum energy reaction pathway for the formation of main products (PdCH(2) + H(2)O), involving one spin inversion, prefers to start at the triplet state PES and afterward proceed along the singlet state PES, where both CH(3)PdOH and CH(3)Pd(O)H are the critical intermediates. Furthermore, the rate-determining step is RS-CH(3) PdOH → RS-2-TS1cb → RS-CH(2)Pd(H)OH with the rate constant of k = 1.48 × 10(12) exp(-93,930/RT). For the first C-H bond cleavage, both the activation strain ΔE(≠)(strain) and the stabilizing interaction ΔE(≠)(int) affect the activation energy ΔE(≠), with ΔE(≠)(int) in favor of the direct oxidative insertion. On the other hand, in the PdCH(2) + H(2) O reaction, the main products are Pd + CH(3)OH, and CH(3)PdOH is the energetically preferred intermediate. In the CH(2)OPd + H(2) reaction, the main products are Pd + CH(3)OH with the energetically preferred intermediate H(2)PdOCH(2). In the Pd + CH(3)OH reaction, the main products are CH(2)OPd + H(2), and H(2)PdOCH(2) is the energetically predominant intermediate. The intermediates, PdCH(2), H(2) PdCO, and t-HPdCHO are energetically preferred in the PdC + H(2), PdCO + H(2), and H(2)Pd + CO reactions, respectively. Besides, PdO toward methane activation exhibits higher reaction efficiency than the atom Pd and its first-row congener NiO.     

Antimicrobial polymer nanostructures: Synthetic route,mechanism of action and perspective

Protection against bacterial infections is an important research field in modern society. Antimicrobial polymers have received considerable attention as next-generation biocides because they represent an ecologically friendly approach that does not promote resistance. In the last decade, many authors have reported the development of nano-sized antimicrobial polymers with enhanced bactericidal performance by increasing the active-area of biocides. This review presents several suitable methods of synthesis of antimicrobial polymer nanomaterials with various shapes, including a nanosphere and fibrous and tubular structures. We also discuss the antimicrobial mechanisms of these polymers. In addition, antimicrobial polymer thin films, which can inhibit bacterial adhesion, are introduced briefly with examples. Our aim is to present synthetic routes and formation mechanisms of various antimicrobial polymer nanostructures.