A selective biomimetic tweezer for noradrenaline

The new highly preorganized tweezer molecule 1 binds noradrenaline in polar solvents with unprecedented specificity. It uses a biomimetic recognition pattern and rejects almost all other neurotransmitters. LB experiments on a film balance reflect the same selectivity if 1 is incorporated into a stearic acid monolayer.     

In-situ growth of silica nanoparticles on cellulose and application of hierarchical structure in biomimetic hydrophobicity

Monodispersed silica nanoparticles were prepared by a simple two-step method with hydrolysis and condensation. The materials were characterized by dynamic light scattering (DLS), SEM and TEM. Through in-situ growth of silica nanoparticles on cotton fabrics, a dual-scaled surface with nanoscaled roughness of silica and microscaled roughness of cellulose fiber was generated. After the modification of the low surface energy, the wettability of smooth silicon slide, silicon slide with nanoscaled roughness of silica particles, cotton fabric, and cotton fabric with silica particles was evaluated by the tests of the contact angle (CA) and the advancing and receding contact angle (ARCA). The cotton fabric with dual-scaled roughness exhibits a static CA of 149.8° for 4 μL water droplet and a hysteresis contact angle (HCA) of 1.8°. The results of CA and HCA show that microscaled roughness plays a more important role than nanoscaled roughness for the value of CA and HCA. The results in the hydrostatic pressure test and the rain test show the important contribution of nanoscaled roughness for hydrophobicity.     

UVO-tunable superhydrophobic to superhydrophilic wetting transition on biomimetic nanostructured surfaces

A novel strategy for a tunable sigmoidal wetting transition from superhydrophobicity to superhydrophilicity on a continuous nanostructured hybrid film via gradient UV-ozone (UVO) exposure is presented. Along a single wetting gradient surface (40 mm), we could visualize the superhydrophobic (thetaH2O > 165 degrees and low contact angle hysteresis) transition (165 degrees > thetaH2O > 10 degrees ) and superhydrophilic (thetaH2O < 10 degrees within 1 s) regions simply through the optical images of water droplets on the surface. The film is prepared through layer-by-layer assembly of negatively charged silica nanoparticles (11 nm) and positively charged poly(allylamine hydrochloride) with an initial deposition in a fractal manner. The extraordinary wetting transition on chemically modified nanoparticle layered surfaces with submicrometer- to micrometer-scale pores represents a competition between the chemical wettability and hierarchical roughness of surfaces as often occurs in nature (e.g., lotus leaves, insect wings, etc).     

Nanoengineered multiscale hierarchical structures with tailored wetting properties

A simple method for fabricating micro/nanoscale hierarchical structures is presented using a two-step temperature-directed capillary molding technique. This lithographic method involves a sequential application of the molding process in which a uniform polymer-coated surface is molded with a patterned mold by means of capillary force above the glass transition temperature of the polymer. Various microstructures and nanostructures were fabricated with minimum resolution down to approximately 50 nm with good reproducibility. Also contact angle measurements of water indicated that two wetting states coexist on a multiscale hierarchical structure where heterogeneous wetting is dominant for the microstructure and homogeneous wetting for the nanostructure. A simple theoretical model combining these two wetting states was presented, which was in good agreement with the experimental data. Using this approach, multiscale hierarchical structures for biomimetic functional surfaces can be fabricated with precise control over geometrical parameters and the wettability of a solid surface can be tailored in a controllable manner.     

Evolutionary screening of biomimetic coatings for selective detection of explosives

Susceptibility of chemical sensors to false positive signals remains a common drawback due to insufficient sensor coating selectivity. By mimicking biology, we have demonstrated the use of sequence-specific biopolymers to generate highly selective receptors for trinitrotoluene and 2,4-dinitrotoluene. Using mutational analysis, we show that the identified binding peptides recognize the target substrate through multivalent binding with key side chain amino acid elements. Additionally, our peptide-based receptors embedded in a hydrogel show selective binding to target molecules in the gas phase. These experiments demonstrate the technique of receptor screening in liquid to be translated to selective gas-phase target binding, potentially impacting the design of a new class of sensor coatings.     

Wettability regulated gram-negative bacterial adhesion on biomimetic hierarchical structures

One of the critical issues in gram-negative bacterial adhesion is how wettability regulates adhesion as the surface wettability varies from superhydrophilic to superhydrophobic,and what is the relevant/contributing role of the lipopolysaccharide(LPS)outer layer of the gram-negative shell during this procedure.Herein,by avoiding the unexpected influence induced by the varied topographies,control over gram-negative bacteria adhesion by wettability is achieved on biomimetic hierarchical surfaces, which is mainly mediated by LPS layer.The study provides a methodology to have a good control over bacteria cell adhesion by properly designing wettable surface structures.This design concept is helpful for developing new generations of biomaterials in order to control a variety of diseases induced by gram-negative bacteria,which still continue to be very important and necessary in the fields of biomedicine.     

Thermodynamic analysis on wetting behavior of hierarchical structured superhydrophobic surfaces

Superhydrophobicity of biological surfaces has recently been studied intensively with the aim to design artificial surfaces. It has been revealed that nearly all of the superhydrophobic surfaces consist of the intrinsic hierarchical structures. However, the role of such structures has not been completely understood. In this study, different scales of hierarchical structures have been thermodynamically analyzed using a 2-D model. In particular, the free energy (FE) and free energy barrier (FEB) for the composite wetting states are calculated, and the effects of relative pillar height (h(r)) and relative pillar width (a(r)) on contact angle (CA) and contact angle hysteresis (CAH) have been investigated in detail. The results show that if the geometrical parameter ratio is the same (e.g., a:b:h = 2:2:1), the equilibrium CA for the composite of the three-, dual-, and single- scale roughness structures is 159.8°, 151.1°, and 138.6°, respectively. Furthermore, the nano- to microstructures of such surfaces can split a large FEB into many small ones and hence can decrease FEB; in particular, a hierarchical geometrical structure can lead to a hierarchical "FEB structure" (e.g., for a dual-scale roughness geometrical structure, there is also a dual-scale FEB structure). This is especially important for a droplet to overcome the large FEBs to reach a stable superhydrophobic state, which can lead to an improved self-cleaning property. Moreover, for extremely small droplets, the secondary or third structure (i.e., submicrostructure or nanostructure) can play a dominant role in resisting the droplets into troughs, so that a composite state can be always thermodynamically favorable for such a hierarchical structured system.     

Importance of hierarchical structures in wetting stability on submersed superhydrophobic surfaces

Submersed superhydrophobic surfaces exhibit great potential for reducing flow resistance in microchannels and drag of submersed bodies. However, the low stability of liquid-air interfaces on those surfaces limits the scope of their application, especially under high liquid pressure. In this paper, we first investigate the wetting states on submersed hydrophobic surfaces with one-level structure under hydrostatic pressure. Different equilibrium states based on free-energy minimization are formulated, and their stabilities are analyzed as well. Then, by comparison with the existing numerical and experimental studies, we confirm that a new metastable state, which happens after depinning of the three-phase contact line (TCL), exists. Finally, we show that a strategy of using hierarchical structures can strengthen the TCL pinning of the liquid-air interface in the metastable state. Therefore, the hierarchical structure on submersed surfaces is important to further improve the stability of superhydrophobicity under high liquid pressure.     

Non-contact biomimetic mechanism for selective hydrogenation of nitroaromatics on heterogeneous metal nanocatalysts

While the enzymatic reduction of unsaturated compounds usually has high specificity, highly selective reduction processes are hardly realized by heterogeneous industrial catalysts, which is critical for the green production of many fine chemicals. Here, we report an unexpected discovery of a biomimetic behavior of dicyandiamide(DICY)-modified Pt nanocatalysts for the green hydrogenation of a wide range of nitroaromatics. We demonstrate that the surface modification by DICY not only prevents the ...     

Stepwise molding of a highly selective ribonucleopeptide receptor

The structural characteristics of RNA-peptide (RNP) complexes are suitable for molding of a ligand-binding pocket of the RNP complex in a stepwise manner. The first step involves molding of the RNA subunit by in vitro selection of an RNP pool originating from an RNA library and the peptide, as previously reported for the construction of an ATP-binding RNP complex from an RRE RNA-Rev peptide complex. The second step involves selection from an RNP library consisting of Rev peptides with randomized amino acid residues and the RNA subunit selected in the first molding. The ATP-binding pocket produced by sequential molding of RNA and peptide subunits shows higher affinity to ATP and a distinct specificity for ATP versus dATP as compared to the ATP-binding RNP receptor in which only the RNA subunit has been molded. The second step selection from the peptide-based RNP library allows expansion of the ATP recognition surface, consisting of both RNA and peptide subunits, to enhance the affinity and selectivity to discriminate ATP against dATP. Our approach of stepwise molding offers the advantage of increasing the diversity of the RNP library by utilizing characteristics of different biopolymers. The ribonucleopeptide-based, multi-subunit approach is also extendable to other biomacromolecular assemblies, which may yield artificial receptors and enzymes with increased specificity and more diverse chemical activities.     

Role of gas delay time on the hierarchical crystalline structure and mechanical property of HDPE molded by gas-assisted injection molding

The relationship among the processing parameters, crystalline morphology, and macroscopic properties in injected molded bar becomes very complicated due to existence of temperature gradient and shear gradient along the sample thickness. To enhance the shear strength, gas-assisted injection molding (GAIM) was utilized in producing the molded bars. The aim of our research was to explore the relationship between processing conditions and the spatial variation of the hierarchy structure as well as the mechanical properties of high-density polyethylene (HDPE) obtained via GAIM. In our previous work [Wang L, Yang B, Yang W et al (2011) Colloid Polym Sci 289:1661–1671], we found that the enhancement of the gas pressure can remarkably increase the degree of molecular orientation in the HDPE samples, which turns out to improve the mechanical performances of GAIM parts. In this work, the hierarchy structure, orientation behavior, and mechanical properties of molder bars under different gas delay time were investigated using a variety of characterization techniques including rheological experiments, scanning electron microscope, tensile testing, differential scanning calorimetry, and two-dimensional wide-angle X-ray scattering. Moreover, the temperature field during the short shot stage of GAIM process was simulated using an enthalpy transformation approach. Our results indicate that these properties were intimately related to each other, and with prolonged gas delay time, GAIM samples with higher degree of orientation and improved mechanical properties were obtained.     

Direct synthesis of hierarchical monolithic silica for high performance liquid chromatography

The silica-based monolith exhibiting a hierarchical bimodal porous structure has been directly synthesized via lytropic mesophase. The hydrolysis and condensation of tetramethoxysilane (TMOS) in the presence of poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) (P123) and acetic acid results in silica monolith with MSU-type mesoporous structure embedded in the skeleton of the interconnected macropore. The silica monolith with bimodal porous structure can separate benzene and phenol with high flow rate and low back-pressure. Moreover, the chromatographic property of C18-grafted silica monolith is investigated in the separation of aromatic molecules. Our primary result shows that the silica monolith with interconnected macropore and MSU-type mesopore is a promising packing material as stationary phase for high performance liquid chromatography.     

Impact of surface forces on wetting of hierarchical surfaces and contact angle hysteresis

The influence of the long-range surface forces on the wetting of multi-scale partially wetted surfaces is discussed. The possibility of partial wetting is stipulated by a specific form of the Derjaguin isotherm. Equilibrium of a liquid meniscus inside a cylindrical capillary is used as a model. The interplay of capillary and disjoining pressures governs the equilibrium of the liquid in the nano- and micrometrically scaled pores constituting the relief of the surface. It is shown that capillaries with a radius smaller than a critical one will be completely filled by water, whereas the larger capillaries will be filled only partially. Thus, small capillaries will show the Wenzel type of wetting behavior, while the same liquid inside the large capillaries will promote the Cassie-Baxter type of wetting. Consideration of disjoining/conjoining pressure allows explaining of the “rose petal effect”, when a high apparent contact angle is accompanied with a high contact angle hysteresis.     

Island organization of TiO2 hierarchical nanostructures induced by surface wetting and drying

We report on the reorganization and bundling of titanium oxide nanostructured layers, induced by wetting with different solvents and subsequent drying. TiO(2) layers are deposited by pulsed laser deposition and are characterized by vertically oriented, columnar-like structures resulting from assembling of nanosized particles; capillary forces acting during evaporation induce bundling of these structures and lead to a micrometer-size patterning with statistically uniform islands separated by channels. The resulting surface is characterized by a hierarchical, multiscale morphology over the nanometer-micrometer length range. The structural features of the pattern, i.e., characteristic length, island size, and channel width, are shown to depend on properties of the liquid (i.e., surface tension) and thickness and density of the TiO(2) layers. The studied phenomenon permits the controlled production of multiscale hierarchically patterned surfaces of nanostructured TiO(2) with large porosity and large surface area, characterized by superhydrophilic wetting behavior without need for UV irradiation.     

Modular domain structure: a biomimetic strategy for advanced polymeric materials

A long lasting challenge in polymer science is to design polymers that combine desired mechanical properties such as tensile strength, fracture toughness, and elasticity into one structure. A novel biomimetic modular polymer design is reported here to address this challenge. Following the molecular mechanism used in nature, modular polymers containing multiple loops were constructed by using precise and strong hydrogen bonding units. Single-molecule force-extension experiments revealed the sequential unfolding of loops as a chain is stretched. The excellent correlation between the single-molecule and the bulk properties successfully demonstrates our biomimetic concept of using modular domain structure to achieve advanced polymer properties.     

Biocatalytic and biomimetic aminolysis reactions: useful tools for selective transformations on polyfunctional substrates

Aminolysis is a deeply studied reaction, but the development of new catalysts for this process is still an emerging area of organic and bioorganic chemistry. Two different approaches are reviewed in this article: the biomimetic de novo designed synthetic catalysts and the use of natural enzymes. Brief mechanistic considerations are discussed. Some important aspects like chemo-, regio- and stereoselectivity towards the substrates are highlighted on selected examples with synthetic applications.     

Ordered polymeric microhole array made by selective wetting and applications for electrochemical microelectrode array

In this paper, we report the microelectrode array fabrication using selective wetting/dewetting of polymers on a chemical pattern which is a simple and convenient method capable of creating negative polymeric replicas using polyethylene glycol (PEG) as a clean and nontoxic sacrificial layer. The fabricated hole-patterned polypropylene film on gold demonstrated enhanced electrochemical properties. The chemical pattern is fabricated by microcontact printing using octadecanethiol (ODT) as an ink on gold substrate. When PEG is spin-cast on the chemical pattern, PEG solution selectively dewets the ODT patterned areas and wets the remaining bare gold areas, leading to the formation of arrayed PEG dots. A negative replicas of the PEG dot array is obtained by spin-coating of polypropylene (PP) solution in hexane which preferentially interacts with the hydrophobic ODT region on the patterned gold surface. The arrayed PEG dots are not affected the during PP spin-coating step because of their intrinsic immiscibility. Consequently, the hole-patterned PP film is obtained after PEG removal. The electrochemical signal of the PP film demonstrates the negligible leakage current by high dielectric and self-healing of defects on the chemical pattern by the polymer. This method is applicable to fabrication of microelectrode arrays and possibly can be employed to fabricate a variety of functional polymeric structures, such as photomasks, arrays of biomolecules, cell arrays, and arrays of nanomaterials.     

The hierarchical structure of chemical engineering

Around the turn of the present century,scholars began to recognize chemical engineering as a com-plex system,and have been searching for a convenient point of entry for refreshing its knowledge base.From our study of the dynamic structures of dispersed particles in fluidization and the resultingmulti-scale method,we have been attempting to extend our findings to structures prevailing in othermultiphase systems as well as in the burgeoning industries producing functional materials.Chemicalengineering itself is hierarchically structured.Besides structures based on space and time,such hier-archy could be built from ChE history scaled according to science content,or from ChE operation ac-cording to the expenditure of manpower and capital investment.     

On the difference in material structure and fatigue properties of nylon specimens produced by injection molding and selective laser sintering

This paper describes the influence of dynamic tension/compression loading on notched and unnotched nylon specimens fabricated by Injection Molding (IM) and Selective Laser Sintering (SLS). The main objective of this work is to analyze and describe the differences in material structure and fatigue properties of as-built nylon parts produced by IM and SLM from the same polyamide 12 powder. The differences in dimensional quality, density, surface roughness, crystal structure and crystallinity are systematically measured and linked to the mechanical fatigue properties. The fatigue properties of the unnotched SLS specimens are found to be equal to those of the unnotched IM specimens. The presence of pores in the sintered samples does not lead to rapid failure, and the microvoid coalescence failure mechanism is delayed. The notched specimens show more brittle failure and increased fatigue resistance which is caused by local notch-strengthening. The results enable improved understanding of the difference in material structure and fatigue behavior of selective laser sintered and injection molded polyamide.     

Excitons in J-aggregates with hierarchical structure

Unusually sensitive wavelength dependence of hole-burning efficiency in oriented J-aggregates is explained by the hierarchical structure of one-dimensional J-aggregates proposed by us from the experimental results of the concentration dependence of the dichroic spectra.