The determination of thiols with diphenylpicrylhydrazyl as a spectrophotometric reagent

Diphenylpicrylhydrazyl (DPPH), a stable, intensely purple free radical, is used as a reagent in the quantitative determination of various aromatic and aliphatic thiols by indirect spectrophotometric analysis. Plots of degree of reaction vs. time show that thiophenol and its derivatives react more quickly than aliphatic thiols with DPPH. Calibration plots are linear over the concentration range 0.05-3.00 x 10(-5)M thiol. The average relative error is in the range 1-2% and the absolute standard deviations range up to 0.50 x 10(-6)M.     

Spectrophotometric determination of uric acid based on fading of o-hydroxyhydroquinonephthalein-palladium(II)-hexadecyltrimethyl-ammonium complex.

A simple and highly sensitive spectrophotometric method for the determination of uric acid (UA) was established based on fading of the o-hydroxyhydroquinonephthalein-palladium(II)-hexadecyltrimethylammonium complex. In the determination of UA, Beer's law is obeyed in the range of 0.01-0.20 microg ml(-1), with an effective molar absorptivity at 635 nm, the relative standard deviation being 6.5 x 10(5) dm(3) mol(-1) cm(-1) and 1.5% (n = 5). This method is about 20-times more sensitive than the conventional methods. The method was successfully applied to the assay of UA in human urine.     

Spectrophotometric determination of glucosamine and its analogous amino sugars with o-hydroxyhydroquinonephthalein and palladium(II).

A simple and highly sensitive spectrophotometric method for the determination of glucosamine and its analogous amino sugars was established based on fading of the palladium(II)-o-hydroxyhydroquinonephthalein-hexadecyltrimethylammonium complex. In the determination of glucosamine, Beer's law is obeyed in the range of 0.02 - 0.18 microg ml(-1), with an effective molar absorptivity at 630 nm and the relative standard deviation being 8.4 x 10(5) dm3 mol(-1) cm(-1) and 1.08% (n = 10). This method is about 70-times more sensitive than the Elson-Morgan method. The method was successfully applied to the assay of glucosamine in actual samples.     

Rapid and selective spectrophotometric determination of manganese in steels and alloys using resacetophenone oxime

A sensitive spectrophotometric method is developed for the determination of manganese in aqueous medium. The metal ion forms a yellowish brown coloured complex with resacetophenone oxime (RPO) in ammonium chloride and ammonium hydroxide buffer of pH 10.5. The 1:1 complex shows maximum absorbance at 380 nm with a Beer's law range of 0.09-1.7 ppm. The molar absorptivity and the Sandell sensitivity are found as 2.5 x 10(4) l.mole(-1).cm(-1) and 0.002 mug/cm(2), respectively. The stability constant of the complex calculated by Job's method is 7.5 x 10(5). The interfering effects of various cations and anions are studied. The present method is applied to the determination of manganese in some steel and alloy samples.     

Dapsone and iminodibenzyl as novel reagents for the spectrophotometric determination of trace amounts of nitrite in water samples.

A rapid, simple, sensitive and selective spectrophotometric determination of nitrite using new diazotizing and coupling reagents is described. The method is based on a diazotization-coupling reaction between dapsone and iminodibenzyl in a hydrochloric acid medium. The molar absorptivity and Sandell's sensitivity were found to be 7.5 x 10(4) l mol(-1) cm(-1) and 0.000613 microg ml(-1), respectively. The interference effects of various cations and anions were also studied and reported. This method has been found to be applicable for the determination of nitrite in various water samples.     

Spectrophotometric study of the reaction of zinc with O-hydroxybenzenediazoaminoazobenzene and its application

A highly sensitive and selective procedure for spectrophotometric determination of zinc has been developed. At pH 10.6, in the presence of emulsifier p-octylpolyethyleneglycol phenylether (OP), zinc forms an orange-red complex with o-hydroxybenzenediazoaminoazobenzene (HDAA) which has an absorption maximum at 525 nm. The molar absorptivity is 1.50 x 10(5) 1.mole(-1).cm(-1). Beer's law is obeyed for zinc in the range 0-13 mug/25 ml. The method has been applied to the spectrophotometric determination of trace amounts of zinc in aluminium alloy and in human hair. The proposed method is simple, rapid and accurate. No heating or separation is required.     

Flotation-spectrophotometric determination of trace of germanium with isochromatic dye ion-pairs formed by rhodamine 6G and tetrabromofluorescein

A flotation spectrophotometric method for the determination of germanium with isochromatic dye ion-pairs is described. The molar ratio of germanium to rhodamine 6G to tetrabromofluorescein is 1:5:5. The apparent molar absorptivity is 5.8 x 10(5) l mol(-1) cm(-1) at 531 nm. Beer's law is obeyed over the concentration range of 5.0 x 10(-8)-1.25 x 10(-6) mol l(-1). The proposed method is sensitive and accuracy and can be applied satisfactorily to the determination of germanium in vegetables.     

Extraction-spectrophotometric determination of traces of gold in copper in silver, lead, blister copper, copper concentrate and anode slime with 4,4'-bis(dimethylamino)-thiobenzophenone

A sensitive spectrophotometric method has been developed for the determination of gold in copper, silver, lead, blister copper, copper concentrate and anode slime. Optimal conditions have been established for the extraction and determination of gold. Gold is extracted as its bromo complex with tri-n-octylamine and determined photometrically with 4,4'-bis(dimethylamino)thiobenzophenone; the absorbance of the organic phase is measured at 540 nm and the apparent molar absorptivity is about 1.2 x 10(5) 1.mole(-1). cm(-1). As little as 0.1 or 0.2 ppm of gold in these materials can be determined.     

Spectrophotometric Determination of Palladium by the New Chromogenic Reagent N-Butyl - N'-(Sodium P-Aminobenzenesulfonate) Thiourea

Abstract

A highly sensitive spectrophotometric method for determination of palladium by the new chromogenic reagent (BPT) has been developed. In the presence of cetyltrimethylammonium bromide(CTMAB), palladium reacts with BPT to form a stable yellow complex in HAc-NaAc buffer solution of pH 4.6-5.6 at 294.4 nm with a molar absorptivity of 2.46 x 10⁵ l mol^?1 cm^?1. The method is simple, rapid and sensitive. Trace amounts of palladium in mineral and catalyst samples have been satisfactorily determined by the method.     

A highly sensitive colour reaction for chromium(VI) with the iodide-basic xanthene dye-pva system

A highly sensitive spectrophotometric method has been developed for determination of chromium(VI), based on oxidation of I(-) to I(-)(3) in acid medium, then formation of a 1:1 ion-association compound of I(-)(3) with a basic xanthene dye in the presence of poly(vinyl alcohol). The molar absorptivity is 1.79 x 10(5) 1.mole(-1).cm(-1) at 600 nm for the Rhodamine B system, 1.56 x 10(5) 1.mole(-1).cm(-1) at 600 nm with Ethylrhodamine B, 1.56 x 10(5) 1.mole(-).cm(-1) at 570 nm with Rhodamine 6G and 2.01 x 10(5) 1.mole(-1).cm(-1) at 590 nm with Butylrhodamine B, respectively. Preconcentration of chromium(VI) by an improved trioctylamine extraction procedure greatly increases the selectivity of the method and can be applied in the spectrophotometric determination of trace amounts of chromium(VI) in tap water, hot-spring water and river water.     

Colour reaction of gold with 5-(4-sodium sulphonatephenylazo)-8-aminoquinoline and its analytical application

The synthesis of 5-(4-sodium sulphonatephenylazo)-8-aminoquinoline (SPAQ) is described, and a simple, rapid, selective and sensitive new spectrophotometric method for determination of gold is developed. SPAQ reacts with gold(III), and in the presence of cetyl trimethyl ammonium bromide cationic surfactant and upon making the solution alkaline, forms a blue-green 1:3 (metal:ligand) with an absorption maximum at 605 nm. Beer's law is obeyed over the concentration range 0-2 microg/ml gold. The molar absorptivity and Sandell's sensitivity of the method are 1.48 x 10(5) 1.mole(-1).cm(-1) and 0.0013 microg/cm(2), respectively. The interference of various ions has been studied and the method has been used for the determination of microamounts of gold in ores and anode slimes.     

Sensitive spectrophotometric determination of nickel(II) with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol

A simple, selective and highly sensitive procedure for spectrophotometric determination of nickel has been developed. At pH 5.5, nickel reacts with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol in water-ethanol medium to form a red-violet complex which has two absorption maxima, at 520 and 56Onm. The molar absorptivity at 56Onm is 1.26 x 10(5) l.mole(-1).cm(-1). Beer's law is obeyed for 0-15 mug of nickel. Nickel in aluminium alloys and electroplating waste-water has been determined by this method.     

Simultaneous determination of copper and iron by second derivative spectrophotometry using mixtures of ligands

A highly sensitive and selective second derivative spectrophotometric method has been developed for the determination of copper and iron in mixtures. The method is based on the separation of the analytes by liquid-liquid extraction as picrate ion pairs. Iron-picrate, reacts in the organic phase of DCE with 5-phenyl-3-(4-phenyl-2-pyridinyl)-1,2,4-triazine (PPT). Similarly the copper-picrate reacts with 2,9-dimethyl-4,7-diphenyl-1,10-phenantroline (bathocuproine). The extracts were evaluated directly by derivative spectrophotometric measurement, using the zero-crossing approach for determination of copper and graphic method for iron. Iron and copper were thus determined in the ranges 8-120 ng ml(-1) and 8-125 ng ml(-1), respectively, in the presence of one another. The detection limits achieved (3sigma) were 2.9 ng ml(-1) of iron and 2.8 ng ml(-1) of copper. The relative standard deviations were in all instances less than 2.1%. The proposed method was applied to the determination of both analytes in river and tap water and the results were consistent with those provided by the AAS standard method.     

A highly sensitive spectrophotometric method for determination of micro amounts of arsenic

A highly sensitive spectrophotometric method for determination of arsenic, based on the formation of an ion-association complex between arsenoantimonomolybdenum blue and Malachite Green, has been developed. The ion-association complex is soluble in the presence of Triton X-305, so arsenic can be determined directly in aqueous solution. The apparent molar absorptivity for arsenic is 1.13 x 10(5) l.mole(-1).cm(-1) at 640 nm. Beer's law is obeyed for 0-5 mug of arsenic. The lower limit of determination (absorbance = 0.01) is 4 ng ml in the final solution.     

Extraction and spectrophotometric determination of titanium(IV) with malachite green and p-chloromandelic acid, with application to mild steels

A very sensitive, selective and simple method for extraction and spectrophotometric determination of titanium(IV) with an alpha-hydroxy acid has been developed. p-Chloromandelic acid reacts with titanium in weakly acidic aqueous solution at room temperature to form a complex anion extractable into chlorobenzene with Malachite Green as counter-ion. Titanium is determined indirectly by measuring the absorbance of Malachite Green in the extract at 630 nm. The calibration graph is linear for titanium(IV) over the range 0.25-7.5muM (0.05-1.44 mug); the apparent molar absorptivity is 1.31 x 10(5) l.mole(-1).cm(-1). The method has been successfully applied to the determination of titanium in mild steels.     

Spectrophotometric determination of thorium in standard samples and monazite sands based on the floated complex of thorium with N-hydroxy-N,N′-diphenylbenzamidine and thorin

A selective and sensitive spectrophotometric method for the determination of Th(IV) has been based on the reaction with thorin and subsequent extraction of the red-orange coloured complex with N-hydroxy-N,N'-diphenylbenzamidine (HDPBA) in benzene as floated complex at pH 2.2. The complex in ethanol exhibits a maximum absorbance at 495 nm, with a molar absorptivity of 6.0x10(4) l mol(-1) cm(-1), with a Sandell's sensitivity of 3.9x10(-3) microg cm(-2). The method follows Beer's law up to 3.0 microg Th(IV) ml(-1). None of the common cations and anions tested interfere. The detection limit of the method is 0.04 microg Th(IV) ml(-1), the RSD (n=10) is 1.4%. The method has been successfully employed for the determination of thorium in various standard and monazite samples.     

Development and application of spectrophotometric methods for the determination of citalopram hydrobromide in dosage forms

Study was carried out to develop two simple, fast, accurate and sensitive spectrophotometric methods (A and B) for the determination of citalopram hydrobromide in commercial tablet formulations. In method A, UV spectrophotometer determined the contents of citalopram hydrobromide in tablets at 240 nm in methanol solvent. The linear range was 5-40 microg ml-1 with molar absorptivity 1.4x10(4) l mol-1 cm-1. While the method B based on the reaction of citalopram base as n-electron donor with 2,3-dichloro-5,6-dicyano-1,4-benzoquinone as pi-acceptors to give highly colored complex species that absorb maximally at 590 nm. Beer's law was obeyed in the concentration limit of 10-250 microg ml-1 with molar absorptivity 3.3x10(3) l mol-1 cm-1 for citalopram hydrobromide. The limits of detection and limit of quantification was calculated and found to be 5.2 microg ml-1 and 17.4 microg ml-1 respectively. The proposed methods were found to be rapid, accurate, precise and sensitive for the determination of citalopram hydrobromide in commercial tablet formulations with out interferences from common additives encountered.     

Copper(II)-neocuproine as colour reagent for some biologically active thiols: Spectrophotometric determination of cysteine,penicillamine, glutathione,and 6-mercaptopurine

A new direct spectrophotometric method is described for determination of g/ml concentrations of four biologically important thiols: cysteine, penicillamine, glutathione, and 6-mercaptopurine. The method is based on reaction with copper(II)-neocuproine and subsequent measurement of the Cu(I)-neocuproine produced, at 458 nm. The method has been successfully applied to analysis for these thiols, with a relative standard deviation not exceeding 0.6%.     

A highly sensitive spectrophotometric determination of cadmium with alpha,beta,gamma,delta-Tetrakis(4-N-trimethylaminophenyl)-porphine

A new and highly sensitive reagent is proposed for spectrophotometric determination of cadmium. alpha,beta,gamma,delta-Tetrakis (4-N-trimethylaminophenyl) porphine forms a chelate with cadmium in alkaline solution with a molar absorptivity of 5.77 x 10(5)l. mole(-1).cm(t1), the largest value reported to date for a cadmium complex. An extraction method is described for selective separation of cadmium.     

Spectrophotometric determination of anthracycline anticancer agents with aluminum(III) and chromazurol S in a nonionic surfactant micellar medium.

A simple and highly sensitive spectrophotometric method for the determination of anthracycline anticancer agents, such as Daunorubicin hydrochloride (DAU), was established by using aluminum(III) and Chromazurol S (CAS) in a nonionic surfactant micellar medium. In the case of determination of DAU, the apparent molar absorptivity was 1.3 x 10(5) dm3 mol(-1) cm(-1) at 615 nm. Beer's law was obeyed in the concentration range of 0.028 - 2.82 microg ml(-1) for DAU. Owing to no need for solvent extraction, this method could be applied to assays of DAU and related drugs in pharmaceutical preparations.