Synergistic effect of boron containing substances on flame retardancy and thermal stability of intumescent polypropylene composites

The synergistic effect of four different boron containing substances, zinc borate (ZnB), borophosphate (BPO₄), boron silicon containing preceramic oligomer (BSi) and lanthanum borate (LaB), were studied to improve the flame retardancy of a polypropylene (PP) intumescent system composed of ammonium polyphosphate (APP) and pentaerythritol (PER). The flame retardancy of PP composites was investigated by limiting oxygen index (LOI), UL-94 standard, thermogravimetric analysis (TGA) and cone calorimeter tests. The addition of 20 wt% intumescent flame retardant (IFR) improves the flame retardancy by increasing the char formation. According to LOI and UL-94 test, boron compounds show their highest synergistic effect at 1 wt% loading. BPO₄ containing composite shows the highest LOI (30), lowest maximum heat release rate (HRR) and lowest total heat release rate (THR) value. Although the char yield increases as the amount of boron compounds increases, the flame retarding effect decreases. Cone calorimeter and TGA data indicate that the boron compounds are likely to show their synergistic effect by reinforcing the integrity of char which improves its barrier effect rather than increasing the char yield.     

Synergistic effects of aluminum hypophosphite on intumescent flame retardant polypropylene system

The effects of aluminum hypophosphite(AHP) as a synergistic agent on the flame retardancy and thermal degradation behavior of intumescent flame retardant polypropylene composites(PP/IFR) containing ammonium polyphosphate(APP) and triazine charring-foaming agent(CFA) were investigated by limiting oxygen index(LOI), UL-94 measurement, thermogravimetric analysis(TGA), cone calorimeter test(CONE), scanning electron microscopy(SEM) and X-ray photoelectron spectroscopy(XPS). It was found that the combination of IFR with AHP exhibited an evident synergistic effect and enhanced the flame retardant efficiency for PP matrix. The specimens with the thickness of 0.8 mm can pass UL-94 V-0 rating and the LOI value reaches 33.5% based on the total loading of flame retardant of 24 wt%, and the optimum mass fraction of AHP/IFR is 1:6. The TGA data revealed that AHP could change the degradation behavior of IFR and PP/IFR system, enhance the thermal stability of the IFR and PP/IFR systems at high temperatures and promote the char residue formation. The CONE results revealed that IFR/AHP blends can efficiently reduce the combustion parameters of PP, such as heat release rate(HRR), total heat release(THR), smoke production rate(SPR) and so on. The morphological structures of char residue demonstrated that AHP is of benefit to the formation of a more compact and homogeneous char layer on the materials surface during burning. The analysis of XPS indicates that AHP may promote the formation of sufficient char on the materials surface and improve the flame retardant properties.     

Effect of a novel charring-foaming agent on flame retardancy and thermal degradation of intumescent flame retardant polypropylene

A new triazine polymer was synthesized by using cyanuric chloride, ethanolamine and ethylenediamine as raw materials. It is used both as a charring agent and as a foaming agent in intumescent flame retardants, designated as charring-foaming agent (CFA). Effect of CFA on flame retardancy, thermal degradation and mechanical properties of intumescent flame retardant polypropylene (PP) system (IFR-PP system) has been investigated. The results demonstrated that the intumescent flame retardant (IFR) consisting of CFA, APP and Zeolite 4A is very effective in flame retardancy of PP. It was found that when the weight ratio of CFA to APP is 1:2, that is, the components of the IFR are 64 wt% APP, 32 wt% CFA and 4 wt% Zeolite 4A, the IFR presents the most effective flame retardancy in PP systems. LOI value of IFR-PP reaches 37.0, when the IFR loading is 25 wt% in PP. It was also found that when the IFR loading is only 18 wt% in PP, the flame retardancy of IFR-PP can still pass V-0 rating, and its LOI value reaches 30.2. TGA data obtained in pure nitrogen demonstrated that CFA has a good ability of char formation itself, and CFA shows a high initial temperature of the thermal degradation. The char residue of CFA can reach 35.7 wt% at 700 °C. APP could effectively promote the char formation of the APP-CFA system. The char residue reaches 39.7 wt% at 700 °C, while it is 19.5% based on calculation. The IFR can change the thermal degradation behaviour of PP, enhance T_max of the decomposition peak of PP, and promote PP to form char, based upon the results of the calculation and the experiment. This is attributed to the fact that endothermic reactions took place in IFR charring process and the char layer formed by IFR prevented heat from transferring into inside of IFR-PP system. TGA results further explained the effective flame retardancy of the IFR containing CFA.     

Effect of anion of polyoxometalate based organic–inorganic hybrid material on intumescent flame retardant polypropylene

In this work, 12‐tungestocobaltic acid based organic–inorganic hybrid material, [Bmim]₆CoW₁₂O₄₀ (CoW) was synthesized and applied as a synergist in polypropylene (PP)/intumescent flame retardant (IFR) composites. The flame retardant properties were investigated by the limiting oxygen index (LOI), UL‐94 vertical burning test, thermal gravimetric analyzer (TGA), cone calorimeter and scanning electron microscopy (SEM) etc. The results showed that the PP composites with 16 wt% IFR and 1 wt% CoW achieves the UL‐94 V‐0 rating and gets a LOI value 28.0. However, only add no less than 25 wt% single IFR, can the PP composites obtain the UL‐94 V‐0 rating, which suggests that CoW has good synergistic effects on flame retardancy of PP/IFR composites. In addition, the SEM and cone calorimeter tests indicated the CoW improves the quality of char layer. The rate of char formation has been enhanced also because of the existence of CoW. It is the combination of a better char quality and a high rate of char formation promoted by CoW that results in the excellent flame retardancy of PP/IFR composites. Copyright © 2016 John Wiley & Sons, Ltd.     

Effects of common synergistic agents on intumescent flame retardant polypropylene with a novel charring agent

In this article, the laboratory-made poly (p-ethylene terephthalamide) (PETA) was used as a novel charring agent and it combined with ammonium polyphosphate (APP) to prepare the intumescent flame retardant (IFR). For improving the flame-retardant efficiency of IFRs on polypropylene (PP), several general synergistic agents, such as common zinc oxide (Com-ZnO), nanometer structural zinc oxide (Nano-ZnO), zeolite 4A, and aluminum hypophosphite(Al(H₂PO₂)₃), were added in composites of PP/IFR, and the synergistic effect was investigated by the limited oxygen index (LOI), the UL-94 (vertical flame) test, thermogravimetric analysis (TG), thermogravimetry-fourier transform infraredspectroscopy (TG-IR) test, and scanning electron microscopy (SEM). It indicated that the flame retardancy was significantly enhanced in terms of prompting the char formation of PETA and interaction between APP and synergistic agents. Overall, Al(H₂PO₂)₃ was the most effective synergistic agent among them. TG-IR analysis showed that the addition of Al(H₂PO₂)₃ could delay the release of NH₃, and make the release of NH₃ more smooth, which was useful to form a dense char. SEM presented that compact, continuous and good intumescent charring layers were observed in all PP/IFR systems with synergistic agent.     

Synergistic effect of boron containing substances on flame retardancy and thermal stability of clay containing intumescent polypropylene nanoclay composites

The functions of nanoclay and three different boron containing substances, zinc borate (ZnB), borophosphate (BPO₄), and boron silicon containing preceramic oligomer (BSi), were studied to improve the flame retardancy of polypropylene (PP)‐nanoclay‐intumescent system composed of ammonium polyphosphate (APP) and pentaerythritol (PER). The flame retardancy of PP composites was investigated using limiting oxygen index (LOI), UL‐94 standard, thermogravimetric analysis (TGA), and cone calorimeter. According to the results obtained, the addition of 20 wt% intumescent flame retardant (IFR) improved the flame retardancy by increasing the char formation. Addition of clay slightly increases the LOI value and reduces the maximum heat release rate (HRR). Addition of clay also increases the barrier effect due to intumescent char, especially in thin samples. Boron compounds show their highest synergistic effect at about 3 wt% loading. According to UL‐94 test and LOI test, 3 wt% ZnB containing composite shows the highest rating (V0) and BPO₄ containing sample shows the highest LOI value (26.5). Copyright © 2010 John Wiley & Sons, Ltd.     

Synergistic effect between a novel hyperbranched charring agent and ammonium polyphosphate on the flame retardant and anti-dripping properties of polylactide

A novel hyperbranched polyamine charring agent (HPCA), a derivative of triazines, was synthesized and well characterized by ¹H NMR and FTIR. HPCA and ammonium polyphosphate (APP) were added into polylactide (PLA) resin as an intumescent flame retardant (IFR) system to impart flame retardancy and dripping resistance to PLA. The flammability and thermal stability of IFR-PLA composites were investigated by limiting oxygen index (LOI), UL-94 vertical burning, cone calorimetry and thermogravometric analysis (TGA) tests. The results showed that the IFR system had both excellent flame retardant and anti-dripping abilities for PLA. The TGA curves suggested that HPCA has good ability of char formation and when combined with APP, would induce synergistic effect which could be clearly observed. This effect greatly promoted the char formation of IFR-PLA composites, hence improved the flame retardant property. Additionally, the structure and morphology of char residues were studied by XPS, FTIR and SEM.     

Flame retardant properties and mechanism of an efficient intumescent flame retardant PLA composites

The charring agent (CNCA‐DA) containing triazine and benzene rings was combined with ammonium polyphosphate (APP) to form intumescent flame retardant (IFR), and it was occupied to modify polylactide (PLA). The flame retardant properties and mechanism of flame retardant PLA composites were investigated by the limited oxygen index (LOI), vertical burning test (UL‐94), thermogravimetric analysis, microscale combustion calorimetry, scanning electron microscopy, laser Raman spectroscopy analysis and X‐ray photoelectron spectroscopy. The analysis from LOI and UL‐94 presented that the IFR was very effective in flame retardancy of PLA. When the weight ratio of APP to CNCA‐DA was 3:1, and the IFR loading was 30%, the IFR showed the best effect, and the LOI value reached 45.6%. It was found that when 20 wt% IFR was loaded, the flame retardancy of PLA/IFR still passed UL‐94 V‐0 rating, and its LOI value reached 32.8%. The microscale combustion calorimetry results showed that PLA/IFR had lower heat release rate, total heat release, and heat release capacity than other composites, and there was an obvious synergistic effect between APP and CNCA‐DA for PLA. IFR containing APP/CNCA‐DA had good thermal stability and char‐forming ability with the char residue 29.3% at 800°C under N₂ atmosphere. Scanning electron microscopy observation further indicated that IFR could promote forming continuous and compact intumescent char layer. The laser Raman spectroscopy analysis and X‐ray photoelectron spectroscopy analysis results indicated that an appropriate graphitization degree of the residue char was formed, and more O and N were remained to form more cross‐linking structure. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis of organo-modified α-zirconium phosphate and its effect on the flame retardancy of IFR poly(lactic acid) systems

Novel intumescent flame-retardant poly(lactic acid) (PLA/IFR)/organo-modified α-zirconium phosphate(OZrP) nanocomposites were prepared via incorporation of charring agent (CA), ammonium polyphosphate (APP) and OZrP into PLA. OZrP was synthesized directly by a solvent thermal method. The morphological characterization of PLA/IFR/OZrP nanocomposites was conducted by wide angle X-ray diffraction (WXRD) and transmission electron microscopy (TEM). The effect of the OZrP on flame retardancy and the thermal stability of PLA/IFR composites were studied by thermogravimetric analysis (TGA), limiting oxygen index (LOI), vertical burning test (UL-94) and cone calorimeter test. The TGA data illustrated that the OZrP could increase the residue and significantly improve the flame retardancy of PLA/IFR/OZrP nanocomposites showing an excellent synergistic effect. The addition of OZrP to the flame-retardant PLA increases the LOI and enhances the UL-94 rating. Cone calorimeter tests gave clear evidence that the incorporation of OZrP into PLA/IFR composites resulted in the significant reduction of the heat release rate (HRR), low total heat release (THR) and high amount of char residues during combustion. The flame-retardant mechanism of PLA/IFR/OZrP nanocomposites may correspond to the intumescent flame-retardant mechanism and catalyzed carbonization mechanism caused by OZrP.     

Synergistic effect of DOPO immobilized silica nanoparticles in the intumescent flame retarded polypropylene composites

The synergistic effect of 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) immobilized silica (SiO₂‐DOPO) nanoparticles with an intumescent flame retardant (IFR) on the flame retardancy of polypropylene (PP) was investigated by UL 94 vertical tests and limiting oxygen index (LOI) measurements. It was found that the PP/IFR composites (25 wt%) achieved the UL94 V0 grade and LOI increased to 32.1 with an incorporation of 1.0 wt% SiO₂‐DOPO nanoparticles. Based on thermogravimetric analysis, scanning electronic microscopy and rheological analysis, it is speculated that three factors are mainly contributed to the improvement of the flame retardancy. First, the thermal stability of PP/IFR composites was improved by incorporating SiO₂‐DOPO nanoparticles. Second, the presence of SiO₂‐DOPO nanoparticles could induce the formation of a continuous char skin layer during combustion. The compact char layer could effectively impede the transport of bubbles and heat. Third, rheological analysis indicated that SiO₂‐DOPO nanoparticles could increase viscosity of the PP/IFR composites, which was also benefited to increase flame retardancy. Copyright © 2013 John Wiley & Sons, Ltd.     

Synergistic effects of β‐cyclodextrin containing silicone oligomer on intumescent flame retardant polypropylene system

The effects of β‐cyclodextrin containing silicone oligomer(CDS), as a synergistic agent, on the flame retardancy and mechanical properties of intumescent flame retardant polypropylene composites were studied by adding different amounts of CDS in intumescent flame retardants. The limiting oxygen index (LOI), UL‐94 test, thermogravimetric analysis (TGA), and scanning electron microscopy (SEM) were utilized to evaluate the synergistic effects of CDS in the composites. It was found that after a little amount of CDS partially replaced a charring‐foaming agent (CFA) in IFR, LOI values of the composites were enhanced and they obtained a UL‐94 V‐0 rating. IFR system containing 6.25wt% CDS presented the best flame retardancy in PP. The experimental results obtained from LOI and UL‐94, TGA, SEM, and mechanical properties indicated that the combination of CDS and CFA presents synergistic effects in flame retardancy, char formation, and mechanical properties of the composites. This is probably due to different structures of polyhydroxyl macromolecules (CDS and CFA), the existence of dimethyl silicone group in CDS, and the toughness of epoxy silicon chain in CDS. SEM results proved that the interfacial compatibility between IFR and PP was improved by CDS. Copyright © 2009 John Wiley & Sons, Ltd.     

Effect of polysiloxane and silane‐modified SiO2 on a novel intumescent flame retardant polypropylene system

The effects of polysiloxane and silane‐modified SiO₂ (M‐SiO₂) on properties of intumescent flame retardant polypropylene (IFR‐PP) have been studied. The results demonstrate that both polysiloxane and M‐SiO₂ could effectively enhance the flame retardancy of the IFR‐PP, despite only 20 wt% loading of IFRs. Remarkably, the polysiloxane can clearly improve the water resistance of IFR‐PP. It can obtain UL‐94 V‐0 rating, and its LOI remains over 34% after the water treatment. The surface tension data, XPS data, and SEM sufficiently prove that the some of polysiloxane transfers to the IFR‐PP surface during processing. The TGA data show that the polysiloxane more effectively enhances the thermal stability of the IFR‐PP at high temperature and increases the char residue. The CONE results reveal that the polysiloxane can clearly change the decomposition behavior of PP and markedly reduce flammability parameters. The homogenous and compact intumescent char layers further confirm that polysiloxane is a very effective silicon‐containing additive for the flame retardancy and water resistance of the IFR‐PP. Copyright © 2010 John Wiley & Sons, Ltd.     

Preparation of urea formaldehyde microsphere and its effect on flame retardant ethylene vinyl acetate composites

Urea formaldehyde microsphere (UFM) was prepared and used with organic montmorillonite (OMMT) to modify the flame retardant efficiency of ethylene vinyl acetate copolymer (EVA)/intumescent flame retardant (IFR) composites. The results show that single IFR may modify the flame retardancy of EVA, but its efficiency is not good enough. The EVA composite containing 21 wt% IFR is just classified the UL_94 V2 and has a limiting oxygen index (LOI) 24.7 vol%. Combining UFM with IFR does not improve the flame retardancy of EVA/IFR composites, and blending OMMT with IFR only improves its LOI. Adding 2 wt% UFM, 2 wt% OMMT, and 17 wt% IFR into EVA, it obtains the UL_94 V0 without melt dripping and a LOI 29.0 vol%. Also, the peak heat release rate and total heat release decrease a lot. Good synergistic effects among IFR, UFM, and OMMT improve the char residues and modify the char micromorphology of EVA composites, which provide better protect for the underlying resin.     

Synergistic Effect of Novel Synergists–Transition Metal Ion-incorporated Nickel Phosphates with Intumescent Flame Retardants in Polypropylene

The two kinds of transition metal ion-incorporated nickel phosphates (TMIVSB-1) were synthesized by the hydrothermal method. The flame retardancy and thermal behavior of intumescent flame retardants (IFR), with and without TMIVSB-1 for PP, were investigated by LOI, UL-94 test, thermogravimetric analyses (TGA) and cone calorimetry. TMIVSB-1 can obviously improve the flame retardant behavior of IFR systems according to the results of LOI values and UL-94 test. The results of LOI show that 2 wt% TMIVSB-1 can increase the LOI value by 3–5 unit compared with that of PP/IFR composite. The UL-94 test shows that PP with 20% IFR burns and has no rating, but the addition of a small content 2 wt% of TMIVSB-1 with 18 wt% of IFR can reach a UL-94 V-0 rating. TGA results show that the thermal stability of PP/IFR/TMIVSB-1 increases obviously more than that of PP/IFR when the temperature is above 265°C. From cone calorimetry results, it can be observed that the HRR peaks are not obviously decreased, but the burning time of PP/IFR/FeVSB-1 (351s) and PP/IFR/ZnVSB-1 (380s) is obviously prolonged compared with that of PP/IFR (303s). The real time FTIR spectra (RTFTIR) demonstrates that the addition of TMIVSB-1 further staves the decomposition of the PP composites. The scanning electron microscopy (SEM) indicates the quality of char forming of PP/IFR/ TMIVSB-1 is superior to that of PP/IFR.     

Synthesis of a novel ionic liquid containing phosphorus and its application in intumescent flame retardant polypropylene system

A novel ionic liquid containing phosphorus ([PCMIM]Cl) was synthesized and characterized by FTIR, ¹H NMR, ¹³C NMR and ³¹P NMR. Moreover, a new intumescent flame retardant (IFR) system, which was composed of [PCMIM]Cl and ammonium polyphosphate (APP), was used to impart flame retardancy and dripping resistance to polypropylene (PP). The flammability and thermal behaviors of intumescent flame‐retarded PP (PP/IFR) composites were evaluated by limiting oxygen index (LOI), UL‐94 test, thermogravimetric analysis (TGA) and cone calorimeter test. It was found that there was an obvious synergistic effect between [PCMIM]Cl and APP. When the weight ratio of [PCMIM]Cl and APP was 1:5 and the total amount of IFR was kept at 30 wt%, LOI value of PP/IFR composite reached 31.8, and V‐0 rating was obtained. Moreover, both the peak heat release rate and the peak mass loss rate of PP/IFR composites decreased significantly relative to PP and PP/APP composite from cone calorimeter analysis. The TGA curves suggested that [PCMIM]Cl had good ability of char formation, and when combined with APP, it could greatly promote the char formation of PP/IFR composites, hence improved the flame retardancy. Additionally, the rheological behaviors and mechanical properties of PP/IFR composites were also investigated, and it was found that [PCMIM]Cl could also serve as an efficient lubricant and compatibilizer between APP and PP, endowing the materials with satisfying processability and mechanical properties. Copyright © 2013 John Wiley & Sons, Ltd.     

Thermal stability and flame retardancy of PET/magnesium salt composites

Nano-Mg(OH)₂ (nanometre magnesium hydroxide, nano-MH) was successfully introduced into the esterification and polycondensation system by in situ polymerization to obtain PET/magnesium salt composites (PETMS). The thermal properties and flame retardancy of PETMS were investigated by differential scanning calorimeter (DSC), thermogravimetric analysis (TGA), UL-94 vertical burning and limited oxygen index (LOI) test. The DSC and TGA results show that magnesium salts in the PET matrix have little effect on the thermal properties of PET, but a significant effect on the thermal stabilities of the composites. The results of LOI and UL-94 test show PETMS have higher LOI values (≥25%) and V-0 rating without melt dripping in the UL-94 test, indicating that PETMS have good flame retardancy and anti-dripping property. Moreover, the residues of magnesium salts and composites after TGA test were also studied by Fourier transform infrared spectroscopy (FTIR) to better understand the mechanism of flame retardancy, which reveals that magnesium salts accelerate the degradation of PET and catalyze the formation of char. The SEM results show the morphological structures of the char effectively protect the composites’ internal structures and inhibit the heat, smoke transmission and reduce the fuel gases when the fire contacts them.     

Effect of a novel charring agent on thermal degradation and flame retardancy of acrylonitrile–butadiene–styrene

A novel charring agent poly(p-propane terephthalamide) (PPTA) was synthesized by using terephthaloyl chloride and 1,3-propanediamine through solution polycondensation and it was used together with ammonium polyphosphate (APP) to prepare a novel intumescent flame retardant (IFR) for ABS. The thermal degradation behaviour and flame retardancy were investigated, the results showed that PPTA could be effective as a charring agent, the flame retardancy of ABS and the mass of residues improved greatly with the addition of IFR. When the content of APP was 22.5 mass% and PPTA was 7.5 mass%, the limiting oxygen index (LOI) value of IFR-ABS system was found to be 32.4, and class V-0 of UL-94 test was passed. Moreover, the synergistic effects of two different adjuvants AlPi and MnO₂ in IFR-ABS system have been studied.     

Catalyzing carbonization function of α-ZrP based intumescent fire retardant polypropylene nanocomposites

The catalyzing carbonization function of alpha-zirconium phosphate (α-Zr(HPO₄)₂·H₂O, α-ZrP) based on an intumescent fire retardant (IFR) polypropylene (PP) system is reported. The IFR system consists of ammonium polyphosphate and pentaerythritol. The morphology of the PP/organophilic ZrP nanocomposites is characterized by X-ray diffraction and high resolution transmission electron microscopy (HRTEM). The results indicate that an intercalated structure is formed. Thermogravimetric analysis, limiting oxygen index (LOI) and UL-94 are used to characterize the thermal stability and the flame retardant properties. It is found that there is a transformation of the char microstructure and an increment of LOI value in the PP systems with the OZrP, and the UL-94 level is improved, from failure, to a V-0 rating. The synergistic effect improves the flame retardant properties of PP remarkably. The morphology and structure (HRTEM and selected area electron diffraction) of the char residue also indicate the presence of graphite sheets. A possible mechanism for catalyzing carbonization is discussed.     

An investigation into synergistic effects of rare earth oxides on intumescent flame retardancy of polypropylene/poly (octylene‐co‐ethylene) blends

Synergistic effects of two kinds of rare earth oxides (REOs), neodymium oxide (Nd₂O₃) or lanthanum oxide (La₂O₃) on the intumescent flame retardancy of thermoplastic polyolefin (TPO) made by polypropylene/poly (octylene‐co‐ethylene) blends were investigated systemically by various methods. The limiting oxygen index (LOI) of flame retardant TPO (FRTPO) filled by 30 wt% intumescent flame retardants (IFR) composed of ammonium polyphosphate (APP) and pentaerythritol (PER) has been increased from 30 to 32.5 and 33.5 when 0.5 wt% of IFR was substituted by La₂O₃ and Nd₂O₃, respectively. Cone calorimetry tests also reveal the existence of synergistic effects. Thermalgravimetric analyses (TGA) demonstrate that the presence of REOs promotes the esterification and carbonization process in low‐temperature range while enhances the thermal stability of IFR and FRTPO in high‐temperature range. X‐ray diffraction (XRD) reveals that the interaction of Nd₂O₃ with IFR results in the formation of neodymium phosphate (NdP₅O₁₄) with high‐thermal stability. Thermal scanning rheological tests show that the presence of REOs increases complex viscosity of FRTPO in the temperature range of 190～300°C so as to suppress melt dripping but decreases the complex viscosity and increases the loss factors tan δ in temperature range of 300～400°C to make the carbonaceous strucuture more flexible and viscous to resist stress, expand better and keep intact. Copyright © 2009 John Wiley & Sons, Ltd.     

Synergistic effects of 4A zeolite on the flame retardant properties and thermal stability of a novel halogen‐free PP/IFR composite

The synergistic effects of 4A zeolite (4A) on the thermal degradation, flame retardancy and char formation of a novel halogen‐free intumescent flame retardant polypropylene composites (PP/IFR) were investigated by the means of limiting oxygen index (LOI), vertical burning test (UL‐94), digital photos, scanning electron microscopy (SEM), thermogravimetric analysis (TGA), cone calorimeter test (CCT), laser Raman spectroscopy (LRS) and X‐ray photoelectron spectroscopy (XPS). It was found that a small amount of 4A could dramatically enhance the LOI value of the PP/IFR systems and the materials could pass the UL‐94 V‐0 rating test. Also, it could enhance the fire retardant performance with a great reduction in combustion parameters of PP/IFR system from CCT test. The morphological structures observed by digital and SEM photos revealed that 4A could promote PP/IFR to form more continuous and compact intumescent char layer. The LRS measurement, XPS and TGA analysis demonstrated that the compactness and strength of the outer char surface of the PP/IFR/4A system was enhanced, and more graphite structure was formed to remain more char residue and increase the crosslinking degree. Copyright © 2013 John Wiley & Sons, Ltd.