基于DE-LSSVM的滚动轴承故障诊断

针对滚动轴承故障诊断难以获得大量样本的问题以及LS-SVM 模型参数选择方法易陷入局部最优的缺点,提出了一种集合经验模态分解能量熵和差分进化算法（DE）优化最小二乘支持向量机相结合的轴承故障诊断方法。首先原始振动信号采用EEMD分解得到一组固有模态函数（IMF）,从有效本征模态函数IMF分量中提取的能量特征作为输入建立支持向量机,通过计算不同振动信号的能量熵值大小来判断轴承的故障损伤程度。为了提高模型的诊断精度,采用差分进化算法对LS-SVM的结构参数进行优化,并与LS-SVM和PSO-LSSVM模型相比较。结果表明,DE-LSSVM 模型的故障分类准确性得到了提高,可以有效应用于滚动轴承故障诊断中。     

基于决策树与多元支持向量机的齿轮箱早期故障诊断方法

针对齿轮箱部件故障形式多样的特点和典型故障训练样本数量有限的难点,提出了基于决策树与多元支持向量机的齿轮箱早期故障诊断方法。利用决策树分类速度快、效率高的优点和支持向量机在小样本二元分类方面突出的特点构建多元分类识别模型,在不同故障情形下提取齿轮箱振动信号典型特征参数作为故障特征向量训练模型,并对样本进行测试。实验结果表明,该方法在小样本情况下识别效果明显优于神经网络方法,同时在识别效率方面比常规多元支持向量机方法有了较大的提高。     

基于深度学习的故障检测方法

针对传统故障诊断方法中特征提取技术难度大、故障样本获取困难等问题,在深度学习计算框架下提出了一种半监督训练的故障检测方法,利用深度信念网络中的受限波茨曼机堆栈结构实现了数据高层特征的自动提取,结合支持向量数据描述方法实现了异常数据检测,只需利用正常工况的数据样本进行网络训练和模型拟合,无需故障样本数据,也无需人工干预进行信号特征提取,即能实现对故障数据进行的实时检测和判别。经采用标准轴承实验数据的三组故障数据进行验证,故障识别率达到100%,具有很强的工程应用价值。     

基于小波包分解和EMD-SVM的轴承故障诊断方法

针对轴承振动信号具有的非平稳和故障诊断样本数据难以按需获取的问题,设计了一种基于小波包分解和EMD-SVM的故障诊断方法。首先,采用Mallat塔式算法对信号进行降噪,实现信号的小波分解,获得重构后的故障诊断子频带信号。然后,在经典的EMD算法的基础上定义了改进的EMD算法,采用改进的EMD算法对经过小波包降噪的故障诊断子频带信号进行特征提取,从而获得故障诊断特征向量。最后,采用适合小样本分类的SVM进行故障诊断,将经过小波包降噪和EMD特征提取的样本数据用于训练SVM,得到用于故障诊断的多个二分类SVM故障诊断模型,通过投票机制来确定样本数据最终对应的故障诊断类别。在Matlab环境下对轴承故障诊断进行实验,实验结果证明了文中基于小波包和EMD-SVM的方法一种适用于小样本的故障诊断方法,且与其它方法相比,具有诊断效率高和精度高的优点。     

小波包和GA-SVM在轴承故障诊断中的应用

为了解决傅里叶变换难以兼顾信号在时域和频域中的全貌和局部化特征以及支持向量机惩罚参数 和核函数参数 选取的问题,提出了基于小波包和GA-SVM的轴承故障诊断方法。首先通过实验采集多种工况下故障轴承和正常轴承的振动信号,从振动信号中提取能够表征轴承运行状态的时频域特征以及基于小波包分析的特征向量来作为GA-SVM的输入,然后在SVM的基础上,针对SVM的惩罚参数和核函数参数在不同应用场景下的取值难以确定的特性,采用了遗传算法对支持向量机进行参数优化的GA-SVM算法进行模式识别。实验结果显示,基于小波包和GA-SVM的轴承故障诊断方法比SVM和BP都具有更高的识别精度。     

改进粒子群算法优化支持向量机在故障诊断中的应用研究

支持向量机(SVM)作为当前新型的机器学习方式,凭借解决小样本问题、高维问题和局部极值问题等方面的优越性,在当前故障诊断方面有突出的表现;文章根据对支持向量机的研究,发现其在分类模型参数选择上存在困难,为此,提出利用改进粒子群算法优化的办法,解决粒子群前期收敛速度过快导致后期容易优化不均的现象;通过粒子群算法优化与支持向量机分类模型结合,以轴承故障检测和诊断为例,分析次方法的优越性和提高支持向量机在故障诊断过程中的精准度;通过实际检测得出,这种算法优化的方法改进的支持向量机对于聚类性较差的故障分类具有很好的诊断功能。     

基于有序分割的支持向量机多分类方法

针对模拟电路多故障分类中存在拒识区域,分类效果不理想的问题,提出基于有序分割最佳偏二叉树结构的模拟电路故障诊断方法;首先分析多分类中分割次序对结果的影响,通过样本类中心欧式距离对故障分割进行排序,以此构造偏二叉树结构;然后对采样数据进行主成份分析降维压缩,最后采用支持向量机作为分类器,对故障数据进行分类;该方法可以使样本类间距离最大,提高了支持向量机模拟电路故障分类的效率和准确度;故障诊断结果表明文章提出的诊断方法在精度提高的情况下,所需训练时间和支持向量数目大大减少,更具稀疏性。     

基于EEMD和球SVM的高速列车转向架故障估计 

基于监测数据评估高速列车空气弹簧、抗蛇行减振器和横向减振器关键部件的运行状态,针对故障状态下车体构架横向加速度的非平稳信号,提出IMF能量矩与改进的多类超球支持向量机相结合对车体运行状态估计,改进的的超球支持向量机对球外与球内重叠区域的样本用不同的决策,具有更好的分类效果;实验数据仿真分析表明,在速度变化下列车故障识别率稳定在87%以上,证明所用方法能够提取到故障状态下的典型特征,改进的支持向量分类器并能很好的估计出高速列车的故障状态。     

基于主元分析与动态时间弯曲的故障诊断方法及应用研究

轴承是工程实际中常用而又极易损坏的部件,特别是对其早期微弱响应的辨识,具有重要的社会价值和意义。为提高运转轴承的安全可靠性和可维护性,提出了基于主元分析与动态时间弯曲距离的故障诊断方法,它可以准确对早期微弱动态响应辨识、诊断。该方法首先将典型故障样本信号与待测信号小波去噪并EMD分解,并对若干固有模态分量主元分析求取主元,然后对主元分量进行分析,获得相关特征值组成特征向量,计算待测信号与已知故障样本信号特征向量的弯曲距离,弯曲距离越小表明两信号越相似,从而辨识故障。此外,还可将其应用于转子、碰磨、齿轮故障诊断中,工程应用实例表明该方法可以准确故障分类,高效故障诊断。     

基于相关性原理起重机负载电机监测系统设计

对起重机负载电机进行了研究,采用西门子公司的S7-200 SMART PLC采集负载电机的机械振动信号,通过工业Wi-Fi无线模块以无线数据包的形式将采集的数据汇总到上位机LabVIEW监测平台。上位机的LabVIEW监测平台对电动机振动信号进行相关性和频谱分析,将实时振动数据频谱信号和已知常见负载电机的轴承外圈故障、轴承内环故障和滚子故障三种典型的故障状态频谱信号进行相关性运算,得到实时信号与已知状态的相关系数;提出了以相关系数作为故障诊断判定阈值的方法进行故障诊断,实现了对起重机状态进行监测以及监控信息发布。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.