Synthesis of nickel nanoparticles and carbon encapsulated nickel nanoparticles supported on carbon nanotubes

Nickel nanoparticles were prepared and uniformly supported on multi-walled carbon nanotubes (MWCNTs) by reduction route with CNTs as a reducing agent at 600 °C. As-prepared nickel nanoparticles were single crystalline with a face-center-cubic phase and a size distribution ranging from 10 to 50 nm, and they were characterized by transmission electron microscopy (TEM), high-resolution TEM and X-ray diffraction (XRD). These nickel nanoparticles would be coated with graphene layers, when they were exposed to acetylene at 600 °C. The coercivity values of nickel nanoparticles were superior to that of bulk nickel at room temperature.     

Synthesis of polygonized carbon nanotubes utilizing inhomogeneous catalyst activity of nonspherical Fe3O4 nanoparticles

The synthesis of novel carbon nanotubes (CNTs) with polygonal cross sections by heating a powder mixture of ferrocene, oxalic acid, and the alkali metal potassium at mediate temperatures (480-500 degrees C) is reported. This kind of special polygonized CNTs has two distinctive characters: first, ribbonlike polygonized CNTs have diameters between 60 and 200 nm, and the lengths as long as several microns; second, the edge of polygonized CNTs is well-graphitized, the wall of which is amorphous. On the basis of evidence that the formation of polygonized CNTs appears to be strongly determined by inhomogeneous catalytic activity of nonspherical Fe(3)O(4) nanoparticles, we propose the possible growth model.     

Synthesis of alumina nanotubes using carbon nanotubes as templates

Alumina nanotubes have been fabricated using carbon nanotubes (CNTs) as templates at 1473 K. The Al₂O₃ nanotubes are polycrystals. They are less than 100 nm in outer diameter and tens of nanometer in inner diameter, which is close to the outer diameters of the templates. Under certain conditions, AlN and Al₂O₃ nanowires can also be fabricated in this reaction system. Discussions on the growth mechanisms of these nanotubes and nanowires are presented.     

Synthesis and characterization of unbranched and branched multi-walled carbon nanotubes using Cu as catalyst

Unbranched and branched carbon nanotubes (CNTs) were synthesized by catalytic chemical vapor deposition from methane at 900 °C over a Cu/MgO catalyst. Morphology and structure of the CNTs were characterized by scanning and transmission electron microscopy, and Raman spectroscopy. The effect of methane flow rate on the CNT growth was investigated. The results suggest that the products were transformed from unbranched to branched CNTs with an increase in methane flow rate. The simplicity and controllability of such a preparation technique make it a promising method to synthesize different carbon nanotube structures.     

Single-walled carbon nanotubes of controlled diameter and bundle size and their field emission properties

Field emission studies were conducted on as-produced CoMoCAT single-walled carbon nanotube/silica composites with controlled nanotube diameter and bundle size. It has been observed that the as-produced nanotube material does not need to be separated from the high-surface area catalyst to be an effective electron emitter. By adjusting the catalytic synthesis conditions, single-walled carbon nanotubes (SWNT) of different diameters and bundle sizes were synthesized. A detailed characterization involving Raman spectroscopy, optical absorption (vis-NIR), SEM, and TEM was conducted to identify the nanotube species present in the different samples. The synthesis reaction temperature was found to affect the nanotube diameter and bundle size in opposite ways; that is, as the synthesis temperature increased the nanotube average diameter became larger, but the bundle size became smaller. A gradual and consistent reduction in the emission onset field was observed as the synthesis temperature increased. It is suggested that the bundle size, more than the nanotube diameter or chirality, determines the field emission characteristics of these composites. This is a clear demonstration that field emission characteristics of SWNT can be controlled by the nanotube synthesis conditions.     

Electron-transfer reduction of cup-stacked carbon nanotubes affording cup-shaped carbons with controlled diameter and size

The electron-transfer reduction of cup-stacked carbon nanotubes (CSCNTs) with sodium naphthalenide and the subsequent treatment with 1-iodododecane results in electrostatically destacking of CSCNTs to afford cup-shaped carbons with controlled diameter and size. The dodecylated cup-shaped carbons were highly dispersed and stable in nonpolar solvents, such as THF, tetrachloroethylene, and chloroform, as compared with the pristine CSCNTs.     

Synthesis of a hybrid material from CdS nanoparticles and carbon nanotubes

A method for synthesis of a hybrid material from CdS nanoparticles and carbon nanotubes (CNT) by the precipitation of CdS nanoparticles on the CNT surface from an aqueous solution containing the Cd^II salt, thiourea, and ammonia was developed. The dependences of the size of particles formed on the CNT on the temperature of the solution and the duration of precipitation were observed. The degree of imperfection of the CNT surface exerts a substantial effect on the density of the precipitated CdS particles.     

Efficient anchorage of Pd nanoparticles on carbon nanotubes as a catalyst for hydrazine oxidation

A simple method is devised to deposit well-dispersed Pd nanoparticles on multi-walled carbon nanotubes (CNTs). Pd nanoparticles (1–3 nm) prepared in ethanol were transferred to toluene solution and modified by organic molecule benzyl mercaptan which acts as a cross linker between Pd nanoparticles and CNTs. The morphology and structure of the resulting Pd/CNT nanocomposite were characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). The results show that Pd nanoparticles were highly dispersed and effectively anchored on CNTs. The excellent electrocatalytic activity of the Pd/CNT nanocomposite for the oxidation of hydrazine was demonstrated by cyclic voltammetry.     

Ethylenediamine-anchored gold nanoparticles on multi-walled carbon nanotubes: Synthesis and characterization

Binding of gold nanoparticles (Au-NP) at amine-functionalised multi-walled carbon nanotubes (MWNTs) is proposed. The MWNTs are functionalised with acylchloride groups, which further react with ethylenediamine to form amine-functionalised MWCNTs. These amines are able to bind preformed colloidal Au-NPs. The Au/MWNT composite material facilitates electron-transfer reactions with free-diffusing redox compounds.     

Synthesis of carbon nanotubes using scrap tyre rubber as carbon source

Carbon nanotubes(CNTs) were successfully synthesized through chemical vapor deposition(CVD) method over cobalt catalysts using scrap tyre rubber as carbon source.The CNTs as produced were investigated by means of X-ray diffraction, thermogravimetric analysis,scanning electron microscope,transmission electron microscopy and Raman spectrum techniques.It was found that the obtained carbon material mainly existed in the form of CNTs.     

Bulk synthesis of large diameter semiconducting single-walled carbon nanotubes by oxygen-assisted floating catalyst chemical vapor deposition

Semiconducting single-walled carbon nanotubes (s-SWCNTs) with a mean diameter of 1.6 nm were synthesized on a large scale by using oxygen-assisted floating catalyst chemical vapor deposition. The oxygen introduced can selectively etch metallic SWCNTs in situ, while the sulfur growth promoter functions in promoting the growth of SWCNTs with a large diameter. The electronic properties of the SWCNTs were characterized by laser Raman spectroscopy, absorption spectroscopy, and field effect transistor measurements. It was found that the content of s-SWCNTs in the samples was highly sensitive to the amount of oxygen introduced. Under optimum synthesis conditions, enriched s-SWCNTs can be obtained in milligram quantities per batch.     

Noncovalent attachment of oxide nanoparticles onto carbon nanotubes using water-in-oil microemulsions

We report a simple and general noncovalent method for attaching ZnO and MgO nanoparticles onto MWNTs using water-in-oil microemulsions, which is important for preserving the mechanical and electrical properties of carbon nanotubes.     

弱磁性Co0.85Se纳米片负载碳纳米管作为电催化析氢催化剂

氢气是一种环境友好可再生的清洁能源,电解水无疑是一种很好的制氢方法.然而,电催化分解水析氢受到其缓慢的动力学过程、较低的催化性能和较差的稳定性的限制.为了使整个过程更节能,具有高电流密度和低的过电势的高效电催化剂被广泛研究.非化学计量相硒化钴(Co0.85Se)作为一种重要的金属硫属化合物具有优异的催化性能而广受关注.但是低维的Co0.85Se活性位点少,分散性差,电子传递能力低,导致其电催化剂活性差.多壁碳纳米管(MWCNTs)具有多种电性能,包括金属导电性和电子存储能力等.因此,MWCNTs的特殊结构和高导电性可以有效地促进电子从电催化剂向碳纳米管的转移,实现高效电分解水制氢性能.本文在不使用表面活性剂和模板的情况下,通过一步水热溶剂热法合成弱磁性Co0.85Se纳米片负载碳纳米管电催化剂.采用磁滞回线研究Co0.85Se和MWCNTs/Co0.85Se的磁性能,结果表明其有弱顺磁性,Co0.85Se纳米片之间的空间距离增强导致粒子间偶极相互作用减弱,从而使MWCNTs/Co0.85Se纳米复合材料的矫顽力值增加到158 Oe.随着微晶尺寸的减小和纳米颗粒间距的增大,MWCNTs/Co0.85Se催化剂的比表面积增大,有利于提高其电催化活性.扫描电镜和透射电镜展示出Co0.85Se纳米片分散性较差,且团聚现象严重,而MWCNTs/Co0.85Se纳米复合催化剂显示Co0.85Se纳米片均匀分散在MWCNTs表面,且纳米片尺寸明显减小,有利于Co0.85Se纳米片暴露更多的活性位点.线性扫描伏安曲线测量表明,在酸性溶液中Co0.85Se纳米片在电流密度为10 mA cm?2时,其过电势为319 mV(vs.RHE),30 wt%MWCNTs/Co0.85Se的过电势为266 mV(vs.RHE).Co0.85Se和MWCNTs/Co0.85Se的Tafel斜率分别为92.6和60.5 mV dec?1.此外,MWCNTs/Co0.85Se的电流交换密度(j0)为0.07 mA cm?2.较小的Tafel斜率和高的电流交换密度表明,MWCNTs/Co0.85Se具有良好的反应动力学和快速的质子分离速率.交流阻抗谱表明MWCNTs/Co0.85Se比Co0.85Se电阻更小,电子传输速率更快.电化学活性表面积与双电层在固液界面处的电容测量值成正比.结果显示,30 wt%MWCNTs/Co0.85Se的双电层电容为0.22 mF cm^-2,高于Co0.85Se和15 wt%的rGO/Co0.85Se(0.04 mF cm^-2,0.17 mF cm^-2),这表明较大的电化学活性表面积有利于析氢反应进行.30 wt%MWCNTs/Co0.85Se的循环稳定测试表明其具有较好的稳定性.综上,本文介绍了通过一步水热法合成具有弱磁性的Co0.85Se和MWCNTs/Co0.85Se电催化剂,碳纳米管作为一种高导电性材料被引入Co0.85Se纳米片中以减少Co0.85Se的团聚,使Co0.85Se的活性位点增加,进而提高电催化制氢性能.     

Dispersion of single-walled carbon nanotubes of narrow diameter distribution

The dispersibility and bundle defoliation of single-walled carbon nanotubes (SWNTs) of small diameter (<1 nm) have been evaluated on CoMoCAT samples with narrow distribution of diameters. As previously observed by photoluminescence and Raman spectroscopy, the CoMoCAT sample exhibits a uniquely narrow distribution of (n,m) structures that remains unchanged after different dispersion conditions. This narrow distribution allowed us to develop a method for quantifying the dispersability of the samples from their optical absorption spectra in terms of two ratios: the "resonance ratio" and the "normalized width." The former is defined as the quotient of the resonant band area and its nonresonant background. The latter is defined as the ratio of the width of the band at half-height to the peak height on a spectrum that has been normalized at 900 nm, making this an intensive property, rather than varying with the path length. In this study of the CoMoCAT sample, we have used the S22 transition corresponding to the (6,5) nanotube to do these calculations, which is the most abundant species. These two ratios provide a quantitative tool to compare different dispersion parameters (time of sonication, degree of centrifugation, etc.) on the same type of sample. From this comparison, an optimal procedure that maximizes the spectral features was selected; this procedure allowed us to contrast various surfactants at different pH values and concentrations. Several surfactants were as good or even better than the one we have used in previous studies, dodecylbenesulfonic acid sodium salt (NaDDBS). Despite differences in their dispersion abilities, none of the surfactants investigated generated new features in the absorption spectra nor changed the distribution of nanotube types, which confirms that the high selectivity of the CoMoCAT sample is in the original sample rather than caused by selective suspension of specific (n,m) nanotubes.     

Adsorption behavior of DNA-wrapped carbon nanotubes on self-assembled monolayer surfaces

We have examined the adsorption of DNA-wrapped single-walled carbon nanotubes (DNA-SWNTs) on hydrophobic, hydrophilic, and charged surfaces of alkylthiol self-assembled monolayers (SAMs) on gold. Our goal is to understand how DNA-SWNTs interact with surfaces of varying chemical functionality. These samples were characterized using reflection absorption FTIR (RAIRS), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy. We have found that DNA-SWNTs preferentially adsorb to positively charged amine-terminated SAMs and to bare gold surfaces versus hydrophobic methyl-terminated or negatively charged carboxylic acid-terminated SAMs. Examination of the adsorption on gold of single-strand DNA (ssDNA) of the same sequence used to wrap the SWNTs suggests that the DNA wrapping plays a role in the adsorption behavior of DNA-SWNTs.     

Concomitant length and diameter separation of single-walled carbon nanotubes

Gel electrophoresis and column chromatography conducted on individually dispersed, ultrasonicated single-walled carbon nanotubes yield simultaneous separation by tube length and diameter. Electroelution after electrophoresis is shown to produce highly resolved fractions of nanotubes with average lengths between 92 and 435 nm. Separation by diameter is concomitant with length fractionation, and nanotubes that have been cut shortest also possess the greatest relative enrichments of large-diameter species. Longer sonication time causes increased electrophoretic mobility in the gels; thus, ultrasonic processing determines the degree of both length and diameter separation of the nanotubes. The relative quantum yield decreases nonlinearly as the nanotube length becomes shorter. These techniques constitute a preparative, scalable method for separating nanotubes by two important attributes required for electronic and sensor applications.     

Stable sequestration of single-walled carbon nanotubes in self-assembled aqueous nanopores

We demonstrate the ability to stably sequester individual single-walled carbon nanotubes (SWNTs) within self-contained nanometer-scale aqueous volumes arrayed in an organic continuum. Large areal densities of 4 × 10(9) cm(-2) are readily achieved. SWNTs are incorporated into a surfactant mesophase which forms 2.3 nm diameter water channels by lyotropic self-assembly. Near-infrared fluorescence spectroscopy demonstrates that the SWNTs exist as well-dispersed tubes that are stable over several months and through multiple cycles of heating and cooling. Absence of physical distortion of the mesophase suggests that the SWNTs are stabilized by adsorbed surfactants that do not extend considerably from the surface. Our findings have important implications for templated assembly of carbon nanotubes using soft mesophases and the development of functional nanocomposites.     

Vertical array growth of small diameter single-walled carbon nanotubes

A hot filament chemical vapor deposition method has been developed to grow vertical array single-walled carbon nanotubes (SWNTs). In this study, a hot filament (temperature greater than 2000 degrees C) was used to activate gas mixtures of hydrogen and carbon containing species at sub-atmospheric pressures. Silicon substrates decorated with islands of iron were directly inserted into a preheated furnace in which a hot filament is activating the gas. Vertical arrays of SWNTs are produced with diameters ranging from 0.78 to 1.6 nm. The samples were characterized with Raman and fluorescence spectroscopy and SEM and TEM microscopy.     

Water-assisted fabrication of aligned microsized carbon tubes made of self-assembled multi-wall carbon nanotubes

Aligned micro-sized carbon tubes have been successfully synthesized on silicon substrate by pyrolysis of cyclohexane/ferrocene in the presence of water, a spectacular feature of which is that the multi-wall carbon nanotubes formed in situ act as the basic building blocks for the construction of micro-tubes via a "multi-scale" self-assembly process.     

Two types of carbon nanocomposites: Graphite encapsulated iron nanoparticles and thin carbon nanotubes supported on thick carbon nanotubes, synthesized using PECVD

In this work, graphite encapsulated Fe nanoparticles and thin carbon nanotubes (CNTs) supported on the pristine CNTs, respectively, were synthesized using plasma enhanced chemical vapor deposition via efficiently controlling the flow rate of discharging CH₄ and H₂ gas. The properties of the obtained hybrid materials were characterized with superconducting quantum interference and field emission measurements. The results showed that the encapsulated Fe nanoparticles had diameters ranging from 1 to 30 nm, and this hybrid nanocomposite exhibited a ferromagnetic behavior at room temperature. Thin CNTs with an average diameter of 6 nm were attached to the surface of the prepared CNTs, which exhibited a lower turn-on field and higher emission current density than the pristine CNTs. The Fe nanoparticles either encapsulated with graphite or used as catalyst for thin CNTs growth were all originated from the pyrolysis of ferrocene.