Azimuthal instability of the interface in a shear banded flow by direct visual observation

The stability of the shear banded flow of a Maxwellian fluid is studied from an experimental point of view using rheology and flow visualization with polarized light. We show that the one-layer homogeneous flow cannot sustain shear rates corresponding to the end of the stress plateau. The high shear rate branch is not found and the shear stress oscillates at the end of the plateau. An azimuthal instability appears: the shear induced band becomes unstable and the interface between the two bands undulates in time and space with a period τ, a wavelength λ and a wave vector k parallel to the direction of the tangential velocity.     

Shear band formation and ductility in bulk metallic glass

The variations in the chemical compositions of the metallic glasses reported in the literature, as well as the overall lack of experimental data concerning the inhomogeneous deformation behaviour of metallic glass, make the evaluation of the effects of shear band/fracture behaviour on the mechanical properties of metallic glasses difficult. Isolating the effect of local shear band formation on bulk inhomogeneous flow would appear to be a first step in approaching this problem. The mechanical behaviour of Vitreloy metallic glass at room temperature and at various strain rates in tension and compression was investigated. The formation of multiple shear bands was observed at high strain rates. An increase in strain rate leads to enhanced ductility in tension and compression. Some aspects of the deformation processes in tension and compression are discussed.     

Tip-induced superconductivity commonly existing in the family of transition-metal dipnictides MPn_2

We report the tip-induced superconductivity on the topological semimetal NbSb₂, similar to the observation on TaAs₂ and NbAs₂. Belonging to the same family of MPn₂, all these materials possess similar band structures, indicating that the tip-induced superconductivity may be closely related to their topological nature and share a common mechanism. Further analysis suggests that a bulk band should play the dominant role in such local superconductivity most likely through interface coupling. In addition, the compatibility between the induced superconductivity and tips’ ferromagnetism gives an evidence for its unconventional nature. These results provide further clues to elucidate the mechanism of the tip-induced superconductivity observed in topological materials.     

Force chain buckling,unjamming transitions and shear banding in dense granular assemblies

Force chain buckling, leading to unjamming and shear banding, is examined quantitatively via a discrete element analysis of a two-dimensional, densely-packed, cohesionless granular assembly subject to quasistatic, boundary-driven biaxial compression. A range of properties associated with the confined buckling of force chains has been established, including: degree of buckling, buckling modes, spatial and strain evolution distributions, and relative contributions to non-affine deformation, dilatation and decrease in macroscopic shear strength and potential energy. Consecutive cycles of unjamming–jamming events, akin to slip–stick events arising in other granular systems, characterize the strain-softening regime and the shear band evolution. Peaks in the dissipation rate, kinetic energy and local non-affine strain are strongly correlated: the largest peaks coincide with each unjamming event that is evident in the concurrent drops in the macroscopic shear stress and potential energy. Unjamming nucleates from the buckling of a few force chains within a small region inside the band. A specific mode of force chain buckling, prevalent in and confined to the shear band, leads to above-average levels of local non-affine strain and release of potential energy during unjamming. Ongoing studies of this and other buckling modes from a structural stability standpoint serve as the basis for the formulation of internal variables and associated evolution laws, central to the development of thermomicromechanical constitutive theory for granular materials.     

Li(Na)AuS体系拓扑绝缘体材料的能带结构

在拓扑领域中发现可以通过大数据搜索拓扑绝缘体,使得此领域对材料的探索转变为对材料性质的研究.半Heusler合金体系是非平庸拓扑绝缘体材料的重要载体.通过全势线性缀加平面波方法计算Li(Na)AuS体系拓扑绝缘体材料的能带结构.采用各种关联泛函计算LiAuS的平衡晶格常数,发现得到的能带图均为具有反带结构的拓扑绝缘体,...     

Microstructural evolution and irreversibility in the viscoelastic response of mesoscopic dusty-plasma liquids

We experimentally demonstrate the viscoelastic response and construct a microscopic dynamical picture using a quasi-2D dusty-plasma liquid confined in a mesoscopic gap and sheared periodically. The correlation between microdisplacement and structural evolution at the discrete kinetic level is explored. Through hopping, the structural rearrangement associated with shear enhanced stretching, kinking, breaking, and reconnection of local lattice lines generates irreversible plastic deformation. The strain energy accumulation in the twisted regions without topological rearrangement is the source for local rebound.     

Ultrasound velocimetry in a shear-thickening wormlike micellar solution: Evidence for the coexistence of radial and vorticity shear bands

We carried out pointwise local velocity measurements on 40 mM cetylpyridinium chloride-sodium salicylate (CPyCl-NaSal) wormlike micellar solution using high-frequency ultrasound velocimetry in a Couette shear cell. The studied wormlike solution exhibits Newtonian, shear-thinning and shear-thickening rheological behavior in a stress-controlled environment. Previous rheology, flow visualization and small-angle light/neutron scattering experiments in the shear-thickening regime of this system showed the presence of stress-driven alternating transparent and turbid rings or vorticity bands along the axis of the Couette geometry. Through local velocity measurements we observe a homogeneous flow inside the 1mm gap of the Couette cell in the shear-thinning (stress-plateau) region. Only when the solution is sheared beyond the critical shear stress (shear-thickening regime) in a stress-controlled experiment, we observe inhomogeneous flow characterized by radial or velocity gradient shear bands with a highly sheared band near the rotor and a weakly sheared band near the stator of the Couette geometry. Furthermore, fast measurements performed in the shear-thickening regime to capture the temporal evolution of local velocities indicate coexistence of both radial and vorticity shear bands. However the same measurements carried out in shear rate controlled mode of the rheometer do not show such rheological complexity.     

Itinerant Topological Magnons in SU (2) Symmetric Topological Hubbard Models with Nearly Flat Electronic Bands

We show that a suitable combination of flat-band ferromagnetism,geometry and nontrivial electronic band topology can give rise to itinerant topological magnons.An SU(2) symmetric topological Hubbard model with nearly flat electronic bands,on a Kagome lattice,is considered as the prototype.This model exhibits ferromagnetic order when the lowest electronic band is half-filled.Using the numerical exact diagonalization method with a projection onto this nearly flat band,we can obtain the magnonic spectra.In the flat-band limit,the spectra exhibit distinct dispersions with Dirac points,similar to those of free electrons with isotropic hoppings,or a local spin magnet with pure ferromagnetic Heisenberg exchanges on the same geometry.Significantly,the non-flatness of the electronic band may induce a topological gap at the Dirac points,leading to a magnonic band with a nonzero Chern number.More intriguingly,this magnonic Chern number changes its sign when the topological index of the electronic band is reversed,suggesting that the nontrivial topology of the magnonic band is related to its underlying electronic band.Our work suggests interesting directions for the further exploration of,and searches for,itinerant topological magnons.     

A numerical examination of shear banding and simple shear non-coaxial flow rules

Strain localisation and shear band formation is frequently observed during the handling and flow of dense phase particulate materials. However, a complete understanding of how shear bands form and what happens inside shear bands is still lacking. In order to address this problem, discrete particle simulations have been carried out to examine the detailed processes that occur at the grain scale associated with the initiation and development of shear bands. To reliably identify the continuum model applicable within a shear band is difficult due to the small number of particles/contacts involved. However, it is normally accepted that the mode of deformation within a shear band is one of simple shear. Consequently, simple shear simulations have been performed in order to determine the evolution of the stress tensor, dilation rate, and the principal directions of stress and strain-rate. It is demonstrated that the corresponding non-coaxial flow rule is equivalent to that suggested by Tatsuoka et al. (Géotechnique 38 148 (1988)). Furthermore, at fully developed flow when there is no further change in volume, the stress and strain-rate directions are coaxial and the flow rule is that proposed by Hill (The Mathematical Theory of Plasticity (Oxford University Press, 1950) p. 294).     

Local friction at a sliding interface between an elastomer and a rigid spherical probe

This paper reports on spatially resolved measurements of the shear stress distribution at a frictional interface between a flat rubber substrate and a glass lens. Silicone rubber specimens marked close to their surface by a colored pattern have been prepared in order to measure the surface displacement field induced by the steady-state friction of the spherical probe. The deconvolution of this displacement field then provides the actual shear stress distribution at the contact interface. When a smooth glass lens is used, a nearly constant shear stress is achieved within the contact. On the other hand, a bell-shaped shear stress distribution is obtained with rough lenses. These first results suggest that simple notions of real contact area and constant interface shear stress cannot account for the observed changes in local friction when roughness is varied.     

Fragmentation dynamics within shear bands--a model for aging tectonic faults?

A numerical model for packing of fragmenting blocks in a shear band is introduced, and its dynamics is compared with that of a tectonic fault. The shear band undergoes a slow aging process in which the blocks are being grinded by the shear motion and the compression. The dynamics of the model have the same statistical characteristics as the seismic activity in faults. The characteristic magnitude distribution of earthquakes appears to result from frictional slips at small and medium magnitudes, and from fragmentation of blocks at the largest magnitudes. Aftershocks to large-magnitude earthquakes are local recombinations of the fragments before they reach a new quasi-static equilibrium. The aftershocks satisfy Omori's law. Local precursor activity at a few times the normal background level appears at a short time before a major earthquake. Seismic gaps appear as a natural consequence of the aging process of a fault. Explanation of the heat flux and principal stress direction anomalies at the faults both involve the value of fracture stress of the blocks in the gouge. The final form of a tectonic fault is predicted to involve a gouge dominated by fine-grained and rather rounded blocks so that it cannot withstand large shear stresses. Received 26 July 2000     

Evaluation of the disorder temperature and free-volume formalisms via simulations of shear banding in amorphous solids

Molecular dynamics simulations of shear band development over 1000% strain in simple shear are used to test whether the local plastic strain rate is proportional to exp(-1/chi), where chi is a dimensionless quantity related to the disorder temperature or free volume that characterizes the structural state of the glass. Scaling is observed under the assumption that chi is linearly related to the local potential energy per atom. We calculate the potential energy per atom corresponding to absolute zero disorder temperature and the energy needed to create a shear transformation zone.     

HL-2M ������Ȧ�Ѽ����Ӧ������

介绍了HL-2M环向场线圈的基本结构设计及其承受的电磁载荷,分析了水平预加载、中心柱预应力筒以及环向抗扭支撑对线圈匝间剪切应力的影响.结果表明,水平预加载及预应力筒在中心柱内产生的压应力有利于提高中心柱的抗扭刚度;环向支撑刚度增加可减小线圈的面内剪切应力.在正常运行工况下,环向场线圈的最大匝间剪切应力小于8MPa,其结构设计满足线圈强度要求.对于大破裂瞬态事件,匝间最大剪切应力约12MPa,接近绝缘材料的剪切疲劳极限,建议采取破裂抑制措施避免该情况发生.     

强流脉冲电子束辐照诱发纯钼表面的损伤效应及结构缺陷

利用强流脉冲电子束（HCPEB）装置对纯钼表面进行辐照处理,并利用X射线衍射仪,扫描电子显微镜（SEM）、透射电子显微镜（TEM）详细分析了辐照表面的微观结构和损伤效应. 1次HCPEB辐照后,纯钼表层积聚了极大的残余应力,多次辐照后表面未融化区域出现大量绝热剪切带,且局部区域发生开裂. 微观结构分析显示,辐照后材料表面形成发散状的位错组态和大量空位簇缺陷;绝热剪切带内部是尺寸为1 μm 左右等轴状的再结晶晶粒. 剪切带造成的材料表面局部软化以及间隙原子偏聚于晶界是材料发生开裂的主要原因. 另外,表面熔化区域可形成尺寸为20 nm左右的纳米晶. 关键词： 强流脉冲电子束 纯钼 绝热剪切带 空位簇缺陷     

Influence of bubbly clusters on the characteristics of the two-phase gas-liquid flow in a flat channel

Results of experimental investigation of a bubbly gas-liquid flow in horizontal and weakly inclined (from −20° to +20°) flat channel are presented. These measurements were carried out within the 0.2–1 m/s range of superficial velocities and volumetric gas flow rate ratio of up to 0.2. The hydrodynamic structure was measured by the electrochemical method with application of wall shear stress and conductivity microprobes. During the experiments signals of shear stress on the upper channel wall and local gas flow rate ratio were recorded completely. After numerical treatment of recorded signals the profiles of local gas flow rate ratio were obtained, average shear stress and its relative mean square pulsations on the upper channel wall were determined. It is shown that under the studied regimes the bubbles are grouped into clusters, and the bubbly flow is presented by alternation of bubbly clusters and single-phase liquid with separate bubbles and without them. Average wall shear stress and absolute shear stress pulsations in the range of bubbly clusters and beyond them were determined. Histograms of probability density distribution were obtained for the wall shear stress on the upper wall. It is shown that average shear stress and absolute pulsations in clusters are significantly higher than those in the flow zone free from bubbles. The work was financially supported by the Russian Foundation for Basic Research (No. 07-08-00405a).     

HgCdTe薄膜的输运特性及其应力调控

窄禁带直接带隙半导体材料碲镉汞(Hg1–xCdxTe)是一种在红外探测与自旋轨道耦合效应基础研究方面都具有重要应用意义的材料.本文对单晶生长的体材料Hg0.851Cd0.149Te进行阳极氧化以形成表面反型层,将样品粘贴在压电陶瓷上减薄后进行磁输运测试,在压电陶瓷未加电压时观察到了明显的SdH振荡效应.对填充因子与磁场倒数进行线性拟合,获得样品反型层二维电子气的载流子浓度为ns=1.25×10^16m^-2.在不同磁场下,利用压电陶瓷对样品进行应力调控,观测到具有不同特征的现象,分析应是样品中存在二维电子气与体材料两个导电通道.零磁场下体材料主导的电阻的变化应来源于应力导致的带隙的改变;而高场下产生类振荡现象的原因应为应力导致的二维电子气能级的分裂.     

拓扑相MoS2电子结构及光学性质的第一性原理研究

基于密度泛函理论的第一性原理对二维拓扑相1T′-MoS₂和2M-MoS₂的电子结构、有效质量和光学性质进行研究,并将其与二维H-MoS₂进行对比分析.研究表明,电子有效质量大小关系为：2M-MoS₂22,空穴有效质量大小关系为：T′-MoS₂<2M-MoS₂2,但2M-MoS₂的空穴有效质量和T′-MoS₂相差不大,二者均适用于高性能电子器件.由于拓扑相1T′-MoS₂和2M-MoS₂均存在能带反转,导致带间相关性以及导带和价带的波函数重叠增强,进而光电流响应增强,二者的光学性质均优于H-MoS₂. 2M-MoS₂具有较大的吸收系数和光电导率,2M-MoS₂对红外光和紫外光有着优...     

Nonlocal effects in flows of wormlike micellar solutions

The flow curve of wormlike micelles usually exhibits a stress plateau sigma* separating high and low viscosity branches, leading to shear-banded flows. We study the flow of semidilute wormlike micellar systems in a confined geometry: a straight microchannel. We characterize their local rheology thanks to particle image velocimetry. We show that flow curves cannot be described by a simple constitutive equation linking the local shear stress to the local shear rate. We demonstrate the existence of nonlocal effects in the flow of wormlike micellar systems and make use of a theoretical framework allowing the measurement of correlation lengths.     

Bi(110)薄膜在NbSe_2衬底上的扫描隧道显微镜研究

二维拓扑绝缘体因其特殊的能带结构带来的新奇物理性质,成为近年来凝聚态物理的研究热点.尤其是在引入超导电性之后,二维拓扑绝缘体中可能存在马约拉纳费米子(Majorana fermion),因此在量子计算方面具有重大应用前景.在Bi(111)薄膜被证实为二维拓扑绝缘体之后, Bi(110)薄膜引起了广泛关注,然而其拓扑性质还存在争议.本文利用分子束外延技术在室温低生长速率环境下成功制备出了高质量的单晶Bi(110)薄膜.通过扫描隧道显微镜测量发现,薄膜以约8个原子层厚度为分界,从双层生长转变为单层生长模式.结合隧道谱测量发现,在NbSe_2衬底上生长的Bi(110)薄膜因为近邻效应而具有明显的超导性质,但并未显示出拓扑边缘态的存在.此外,对薄膜中特殊的量子阱态现象也进行了讨论.     

How does the structural inhomogeneity influence the shear band behaviours of metallic glasses

ABSTRACT

Here we propose a model to understand the influence of structural inhomogeneity on the shear band behaviours of metallic glasses. By considering the inhomogeneous structure and stress concentration, the model predicts that the strain for shear band nucleation in metallic glasses can be variable and far below the theoretical elastic limit. During sliding, the shear band will approach a dynamic equilibrium state of balanced free volume generation and annihilation. By considering the accumulation of irreversible structure change, the shear band will finally develop into fracture. Under fluctuating load, the shear band shows an ‘activate-arrest’ behaviour, which results from a delayed response to the external load change. These results reasonably explain and correlate the physics behind the elastic limit, stick-slip shear band behaviour, implicit shear events, and shear band fracture in metallic glasses. The study can provide another perspective and platform to understand the correlations between structural inhomogeneity and shear band behaviours in metallic glasses, and further explore other shear band related phenomena not only in metallic glasses but also in the class of shear-softened materials.