Bis(trifluoroacetyl) peroxide, CF(3)C(O)OOC(O)CF(3)

Pure, highly explosive CF(3)C(O)OOC(O)CF(3) is prepared for the first time by low-temperature reaction between CF(3)C(O)Cl and Na(2)O(2). At room temperature CF(3)C(O)OOC(O)CF(3) is stable for days in the liquid or gaseous state. The melting point is -37.5 degrees C, and the boiling point is extrapolated to 44 degrees C from the vapor pressure curve log p = -1875/T + 8.92 (p/mbar, T/K). Above room temperature the first-order unimolecular decay into C(2)F(6) + CO(2) occurs with an activation energy of 129 kJ mol(-1). CF(3)C(O)OOC(O)CF(3) is a clean source for CF(3) radicals as demonstrated by matrix-isolation experiments. The pure compound is characterized by NMR, vibrational, and UV spectroscopy. The geometric structure is determined by gas electron diffraction and quantum chemical calculations (HF, B3PW91, B3LYP, and MP2 with 6-31G basis sets). The molecule possesses syn-syn conformation (both C=O bonds synperiplanar to the O-O bond) with O-O = 1.426(10) A and dihedral angle phi(C-O-O-C) = 86.5(32) degrees. The density functional calculations reproduce the experimental structure very well.     

Rhodium-catalyzed dehydrocoupling of the sterically encumbered phosphine-borane adduct tBu(2)PH.BH(3): synthesis of the linear dimers tBu(2)PH-BH(2)-tBu(2)P-BH(3) and tBu(2)PH-BH(2)-tBu(2)P-BH(2)Cl

The dehydrocoupling of the sterically hindered phosphine-borane adduct tBu(2)PH.BH(3) above 140 degrees C is catalyzed by the rhodium complexes [Rh(1,5-cod)(2)][OTf] or Rh(6)(CO)(16) to give the four-membered chain tBu(2)PH-BH(2)-tBu(2)P-BH(3) (1), which was isolated in 60% yield and characterized by multinuclear NMR spectroscopy, mass spectrometry, and elemental analysis. Thermolysis of 1 in the temperature range 175-180 degrees C led to partial decomposition and the formation of tBu(2)PH.BH(3). When the dehydrocoupling of tBu(2)PH.BH(3) was performed in the presence of [[Rh(mu-Cl)(1,5-cod)](2)] or RhCl(3) hydrate, the chlorinated compound tBu(2)PH-BH(2)-tBu(2)P-BH(2)Cl (2) was formed which could not be obtained free of 1. The molecular structures of tBu(2)PH.BH(3), tBu(2)PH-BH(2)-tBu(2)P-BH(3) (1), and tBu(2)PH-BH(2)-tBu(2)P-BH(2)Cl (2) together with 1 were determined by single-crystal X-ray diffraction studies.     

The Synthesis and Structure of (1-(Diphenylphosphino)-1 - (Phenylthio)Ferrocene)Tricarbonyliron(O) (ptppf)Fe(CO)3

The complex (ptppf)Fe(CO)₃ has been prepared in high yield by the reaction of ptppf, l-(diphenyl-phosphino)-l'-(phenylthio)ferrocene, with (cis-cyclooctene)₂-Fe(CO)₃ in THF at ?60°C. The complex has been characterized by IR, ³¹P NMR, mass spectrometry and single-crystal X-ray diffraction. This compound is the first example of a ferrocenyl ligand having both sulfur and phosphorus donor atoms bound to a Fe(CO)₃ moiety. X-ray crystallography shows that the two cyclopentadienyl rings are approximately eclipsed, a rotation of 13° from exactly eclipsed conformation. The tricarbonyl iron center has a trigonal bipyramidal geometry with sulfur occupying the equatorial site and phosphorus the axial site. Crystals of (ptppf)Fe(CO)₃ are monoclinic, with a = 11.645(2), b = 14.304(1), c = 17.075(2) Å,β = 109.23(3)°, Z = 4, and space group P 2₁/n. The structure was solved according to the heavy-atom method and refined by full-matrix least-squares procedures to R = 0.037 for 2098 reflections with I ≥ 2.5σ(I).     

Syntheses and structures of the infinite chain compounds Cs(4)Ti(3)Se(13), Rb(4)Ti(3)S(14), Cs(4)Ti(3)S(14), Rb(4)Hf(3)S(14), Rb(4)Zr(3)Se(14), Cs(4)Zr(3)Se(14), and Cs(4)Hf(3)Se(14)

The alkali metal/group 4 metal/polychalcogenides Cs(4)Ti(3)Se(13), Rb(4)Ti(3)S(14), Cs(4)Ti(3)S(14), Rb(4)Hf(3)S(14), Rb(4)Zr(3)Se(14), Cs(4)Zr(3)Se(14), and Cs(4)Hf(3)Se(14) have been synthesized by means of the reactive flux method at 823 or 873 K. Cs(4)Ti(3)Se(13) crystallizes in a new structure type in space group C(2)(2)-P2(1) with eight formula units in a monoclinic cell at T = 153 K of dimensions a = 10.2524(6) A, b = 32.468(2) A, c = 14.6747(8) A, beta = 100.008(1) degrees. Cs(4)Ti(3)Se(13) is composed of four independent one-dimensional [Ti(3)Se(13)(4-)] chains separated by Cs(+) cations. These chains adopt hexagonal closest packing along the [100] direction. The [Ti(3)Se(13)(4-)] chains are built from the face- and edge-sharing of pentagonal pyramids and pentagonal bipyramids. Formal oxidation states cannot be assigned in Cs(4)Ti(3)Se(13). The compounds Rb(4)Ti(3)S(14), Cs(4)Ti(3)S(14), Rb(4)Hf(3)S(14), Rb(4)Zr(3)Se(14), Cs(4)Zr(3)Se(14), and Cs(4)Hf(3)Se(14) crystallize in the K(4)Ti(3)S(14) structure type with four formula units in space group C(2)(h)()(6)-C2/c of the monoclinic system at T = 153 K in cells of dimensions a = 21.085(1) A, b = 8.1169(5) A, c = 13.1992(8) A, beta = 112.835(1) degrees for Rb(4)Ti(3)S(14);a = 21.329(3) A, b = 8.415(1) A, c = 13.678(2) A, beta = 113.801(2) degrees for Cs(4)Ti(3)S(14); a = 21.643(2) A, b = 8.1848(8) A, c = 13.331(1) A, beta = 111.762(2) degrees for Rb(4)Hf(3)S(14); a = 22.605(7) A, b = 8.552(3) A, c = 13.880(4) A, beta = 110.919(9) degrees for Rb(4)Zr(3)Se(14); a = 22.826(5) A, b = 8.841(2) A, c = 14.278(3) A, beta = 111.456(4) degrees for Cs(4)Zr(3)Se(14); and a = 22.758(5) A, b = 8.844(2) A, c = 14.276(3) A, beta = 111.88(3) degrees for Cs(4)Hf(3)Se(14). These A(4)M(3)Q(14) compounds (A = alkali metal; M = group 4 metal; Q = chalcogen) contain hexagonally closest-packed [M(3)Q(14)(4-)] chains that run in the [101] direction and are separated by A(+) cations. Each [M(3)Q(14)(4-)] chain is built from a [M(3)Q(14)] unit that consists of two MQ(7) pentagonal bipyramids or one distorted MQ(8) bicapped octahedron bonded together by edge- or face-sharing. Each [M(3)Q(14)] unit contains six Q(2)(2-) dimers, with Q-Q distances in the normal single-bond range 2.0616(9)-2.095(2) A for S-S and 2.367(1)-2.391(2) A for Se-Se. The A(4)M(3)Q(14) compounds can be formulated as (A(+))(4)(M(4+))(3)(Q(2)(2-))(6)(Q(2-))(2).     

Vanadium(III) and vanadium(V) amine tris(phenolate) complexes

The coordination chemistry of amine tris(phenolate) ligands around V(III) and V(V) is described for the first time. Three amine tris(phenolate) ligands were employed featuring different steric and electronic influence exerted by the phenolate substituents in the ortho and para positions being either t-Bu, Me, or Cl. V(III) complexes of all ligands (1-3) were readily obtained by reaction between the ligand precursors and VCl3(THF)3 in the presence of triethylamine. The complexes obtained were pentacoordinate, a THF ligand completing the coordination sphere of the metal, which was found to be of almost perfect TBP geometry, as revealed by crystallography. V(V) oxo complexes of all the ligands (4-6) were readily obtained by a reaction between the ligand precursors and VO(OPr)3. The oxo complexes of the alkyl-bearing ligands (4 and 5) could also be synthesized by the air oxidation of the corresponding V(III) complexes (1 and 2); however, the attempted air oxidation of the V(III) complex bound to the electron-poor ligand (3) did not yield the corresponding oxo complex 6. 1H NMR and crystallographic analysis of complexes 4 and 5 supported their TBP structures. Complex 6, on the other hand, was found to be composed of a TBP complex (6a) and an octahedral complex (6b) in equilibrium, the octahedral complex being more stable at lower temperatures. An X-ray structure of 6b revealed a mononuclear oxo complex, the sixth coordination site being occupied by an aqua ligand to which two THF molecules are H-bonded. Complexes 4-6 catalyze the epoxidation of olefins by t-BuOOH, albeit slowly. These complexes may thus be considered as structural and functional models of vanadium-dependent haloperoxidase enzymes.     

Phosphine-boranes as bidentate ligands: formation of [8,8-eta(2)-(eta(2)-(BH(3)).dppm)-nido-8,7-RhSB(9)H(10)] and [9,9-eta(2)-(eta(2)-(BH(3)).dppm)-nido-9,7,8-RhC(2)B(8)H(11)] from [8,8-(eta(2)-dppm)-8-(eta(1)-dppm)-nido-8,7-RhSB(9)H(10)] and [9,9-(eta(2)-dppm)-9-(eta(1)-dppm)-nido-9,7,8-RhC(2)B(8)H(11)], respectively

The two clusters [8,8-(eta(2)-dppm)-8-(eta(1)-dppm)-nido-8,7-RhSB(9)H(10)] (1) and [9,9-(eta(2)-dppm)-9-(eta(1)-dppm)-nido-9,7,8-RhC(2)B(8)H(11)] (2) (dppm = PPh(2)CH(2)PPh(2)), both of which contain pendant PPh(2) groups, react with BH(3).thf to afford the species [8,8-eta(2)-(eta(2)-(BH(3)).dppm)-nido-8,7-RhSB(9)H(10)] (3) and [9,9-eta(2)-(eta(2)-(BH(3)).dppm))-nido-9,7,8-RhC(2)B(8)H(11)] (4), respectively. These two species are very similar in that they both contain the bidentate ligand [(BH(3)).dppm], which coordinates to the Rh center via a PPh(2) group and also via a eta(2)-BH(3) group. Thus, the B atom in the BH(3) group is four-coordinate, bonded to Rh by two bridging hydrogen atoms, to a terminal H atom, and to a PPh(2) group. At room temperature, the BH(3) group is fluxional; the two bridging H atoms and the terminal H atom are equivalent on the NMR time scale. The motion is arrested at low temperature with DeltaG++ = ca. 37 and 42 kJ mol(-1), respectively, for 3 and 4. Both species are characterized completely by NMR and mass spectral measurements as well as by elemental analysis and single-crystal structure determinations.     

Darstellung und Kristallstrukturen von Dicyanamido(triphenylphosphan)gold(I) und Nitrosodicyanmethanido(triphenylphosphan)gold(I)

Preparation and Crystal Structures of Dicyanamido(triphenylphosphane)gold(I) and Nitrosodicyanomethanido(triphenylphosphane)gold(I) The coordination compounds [(Ph₃P)Au{N(CN)₂}] ( 1 ) and [(Ph₃P)Au{ONC(CN)₂}] ( 2 ) are obtained by the reaction of [Au(PPh₃)]NO₃ with Na[N(CN)₂] or K[ONC(CN)₂] in CH₂Cl₂. The compounds are characterized by IR spectroscopy and by crystal structure determination. 1 crystallizes triclinic in the space group P 1 with a = 930.16(4), b = 1011.89(13), c = 1118.35(16) pm, α = 115.327(10), β = 90.899(8), γ = 103.394(8)°, Z = 2. 2 crystallizes monoclinic in the space group P2₁/n with a = 832.59(10), b = 1139.30(16), c = 2078.9(4) pm, β = 99.84(2)°, Z = 4. The crystal structures of both compounds are built up by pairs of antiparallel oriented molecules with linear coordinated gold atoms and weak intermolecular Au–N‐interactions.     

New layered materials: syntheses, structures, and optical properties of K(2)TiCu(2)S(4), Rb(2)TiCu(2)S(4), Rb(2)TiaAg(2)S(4), Cs(2)TiAg(2)sS(4), and Cs(2)TiCu(2)Se(4)

The new compounds K(2)TiCu(2)S(4), Rb(2)TiCu(2)S(4), Rb(2)TiAg(2)S(4), Cs(2)TiAg(2)S(4), and Cs(2)TiCu(2)Se(4) have been synthesized by the reactions of A(2)Q(3) (A = K, Rb, Cs; Q = S, Se) with Ti, M (M = Cu or Ag), and Q at 823 K. The compounds Rb(2)TiCu(2)S(4), Cs(2)TiAg(2)S(4), and Cs(2)TiCu(2)Se(4) are isostructural. They crystallize with two formula units in space group P4(2)/mcm of the tetragonal system in cells of dimensions a = 5.6046(4) A, c = 13.154(1) A for Rb(2)TiCu(2)S(4), a =6.024(1) A, c = 13.566(4) A for Cs(2)TiAg(2)S(4), and a =5.852(2) A, c =14.234(5) A for Cs(2)TiCu(2)Se(4) at 153 K. Their structure is closely related to that of Cs(2)ZrAg(2)Te(4) and comprises [TiM(2)Q(4)(2)(-)] layers, which are separated by alkali metal atoms. The [TiM(2)Q(4)(2)(-)] layer is anti-fluorite-like with both Ti and M atoms tetrahedrally coordinated to Q atoms. Tetrahedral coordination of Ti(4+) is rare in the solid state. On the basis of unit cell and space group determinations, the compounds K(2)TiCu(2)S(4) and Rb(2)TiAg(2)S(4) are isostructural with the above compounds. The band gaps of K(2)TiCu(2)S(4), Rb(2)TiCu(2)S(4), Rb(2)TiAg(2)S(4), and Cs(2)TiAg(2)S(4) are 2.04, 2.19, 2.33, and 2.44 eV, respectively, as derived from optical measurements. From band-structure calculations, the optical absorption for an A(2)TiM(2)Q(4) compound is assigned to a transition from an M d and Q p valence band (HOMO) to a Ti 3d conduction band.     

Photoelectron spectroscopy and density functional theory study of TiAlO(y) (-) (y=1-3) and TiAl(2)O(y) (-) (y=2-3) clusters

Small titanium-aluminum oxide clusters, TiAlO(y) (-) (y=1-3) and TiAl(2)O(y) (-) (y=2-3), were studied by using anion photoelectron spectroscopy. The adiabatic detachment energies of TiAlO(y) (-) (y=1-3) were estimated to be 1.11±0.05, 1.70±0.08, and 2.47±0.08eV based on their photoelectron spectra; those of TiAl(2)O(2) (-) and TiAl(2)O(3) (-) were estimated to be 1.17±0.08 and 2.2±0.1eV, respectively. The structures of these clusters were determined by comparison of density functional calculations with the experimental results. The structure of TiAlO(-) is nearly linear with the O atom in the middle. That of TiAlO(2) (-) is a kite-shaped structure. TiAlO(3) (-) has a kite-shaped TiAlO(2) unit with the third O atom attaching to the Ti atom. TiAl(2)O(2) (-) has two nearly degenerate Al-O-Ti-O-Al chain structures that can be considered as cis and trans forms. TiAl(2)O(3) (-) has two low-lying isomers, kite structure and book structure. The structures of these clusters indicate that the Ti atom tends to bind to more O atoms.     

Chemically induced magnetism and magnetoresistance in La(0.8)Sr(1.2)Mn(0.6)Rh(0.4)O(4)

It is shown by magnetometry and microSR spectroscopy that short-range magnetic interactions between the Mn cations in the nonmetallic K(2)NiF(4)-like phase La(0.8)Sr(1.2)Mn(0.6)Rh(0.4)O(4) become significant below approximately 200 K. Negative magnetoresistance (rho/rho(0) approximately 0.5 in 14 T at 108 K) is apparent below this temperature. Neutron diffraction has shown that an applied magnetic field of 5 T is sufficient to induce saturated (3.38(7)mu(B) per Mn) long-range ferromagnetic ordering of the atomic moments at 2 K, and that the induced ordering persists up to a temperature of 50 K in 5 T. Spin glass behavior is observed below 20 K in the absence of an applied field. The induced magnetic ordering is attributed to the subtle changes in band structure brought about by the external field, and to the controlling influence of Rh(3+) over the relative strength of competing magnetic exchange interactions.     

Oxidation chemistry of poly(ethylene glycol)-supported carbonylruthenium(II) and dioxoruthenium(VI) meso-tetrakis(pentafluorophenyl)porphyrin

[Ru(II)(F(20)-tpp)(CO)] (1, F(20)-tpp=meso-tetrakis(pentafluorophenyl)porphyrinato dianion) was covalently attached to poly(ethylene glycol) (PEG) through the reaction of 1 with PEG and sodium hydride in DMF. The water-soluble PEG-supported ruthenium porphyrin (PEG-1) is an efficient catalyst for 2,6-Cl(2)pyNO oxidation and PhI==NTs aziridination/amidation of hydrocarbons, and intramolecular amidation of sulfamate esters with PhI(OAc)(2). Oxidation of PEG-1 by m-CPBA in CH(2)Cl(2), dioxane, or water afforded a water-soluble PEG-supported dioxoruthenium(VI) porphyrin (PEG-2), which could react with hydrocarbons to give oxidation products in up to 80 % yield. The behavior of the two PEG-supported ruthenium porphyrin complexes in water was probed by NMR spectroscopy and dynamic light-scattering measurements. PEG-2 is remarkably stable to water. The second-order rate constants (k(2)) for the oxidation of styrene and ethylbenzene by PEG-2 in dioxane-water increase with water content, and the k(2) values at a water content of 70 % or 80 % are up to 188 times that obtained in ClCH(2)CH(2)Cl.     

Reaction of (R)-(-)-2-aminomethylpyrrolidine(1,1-cyclobutanedicarboxylato)platinum( II) with guanosine

The reaction of a new antitumor platinum complex, (R)-(-)-2-aminomethylpyrrolidine(1,1-cyclobutanedicarboxylato++ +)platinum(II) (1) with guanosine at room temperature in an aqueous solution was followed by proton nuclear magnetic resonance (1H-NMR) spectroscopy and high performance liquid chromatography (HPLC) at intervals. Both techniques showed that a new compound was formed by displacement of the 1,1-cyclobutanedicarboxylate moiety of 1 with two guanosines, and its 1H-NMR spectrum and HPLC chromatogram were proved to be identical with those of [(R)-(-)-2-aminomethylpyrrolidine]bis(N7-guanosine)platinum(II) (2), which was obtained upon successive treatment of (R)-(-)-2-aminomethylpyrrolidinedichloroplatinum(II) (3) with AgNO3 and 2 mol eq of guanosine in water. The binding sites of the platinum to the two guanosine moieties in 2 were confirmed by the pH dependence of the two G-H8 signals.     

Preparation and characterization of bis(acetonitrile)bis(acetylacetonato)technetium(III)

A new chemical species of bis(acetonitrile)bis(acetylacetonato)technetium(III), [Tc(acac)₂(CH₃CN)₂]⁺, has been prepared by the reaction of tris(acetylacetonato)technetium(III) with acetonitrile in the presence of a strong acid, perchloric or hydrochloric acid. The reaction kinetics were followed by observing spectral change of Tc(acac)₃ in the UV-visible region. The complex has been characterized by combination of elemental analyses, IR and UV-visible spectrophotometry, ion-exchange chromatography, and paper electrophoresis. Applicability of this substance to synthesize mixed-ligand technetium(III) complexes was discussed based on the solubility of this complex and the ease of substitution of the acetonitrile ligand.     

New Layered Polyborates Cs(2)M(2)B(10)O(17) (M = Na, K)

The polyborates Cs(2)M(2)B(10)O(17) (M = Na, K) have been prepared and their structures determined by single-crystal X-ray diffraction methods. They crystallize in the monoclinic space group C2/c (Z = 8) with unit-cell parameters a = 21.643(3) ?, b = 6.558(2) ?, c = 11.072(2) ?, beta = 105.43(1) degrees, V = 1514.8(6) ?(3) for the Na compound and a = 22.547(9) ?, b = 6.614(2) ?, c = 11.288(4) ?, beta = 103.25 degrees, V = 1638.3(8) ?(3) for the K analogue. The new structural type contains a 2-dimensional borate matrix that is built from a complete condensation of the ring system B(5)O(11). The Cs atoms reside within the borate matrix, and the Na (K) atoms are placed between the thick Cs borate sheets.     

Comparative spectroscopic and electrochemical properties of bis(octakis(dodecylthio)naphthalocyaninato)europium(III) and bis(tetra-tert-butylnaphthalocyaninato)europium(III) complexes

Bis(substituted-2,3-naphthalocyaninato)europium(III) complexes: bis(octakis(dodecylthio)-2,3-naphthalocyaninato)europium(III) (Eu[2,3-Nc(SC12H25)8]2, 1) and bis(tetra-tert-butyl-2,3- naphthalocyaninato)europium(III) (Eu[2,3-Nc(t-Bu)4]2, 2) have been synthesized by cyclic tetramerization of naphthalonitriles with Eu(acac)3.H2O in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) in refluxing n-octanol. These compounds were characterized by UV-visible, magnetic circular dichroism (MCD), near-IR, IR, EPR, and mass spectroscopies. The absorption and MCD spectra of 1 showed splitting of the Q band, with peaks at 700 and 784 nm, red shifted from the Q band of 2 at 763 nm. The absorption and MCD spectral band deconvolution calculations of complex 1 gave two A terms in the Q-band region. The A terms are assigned to 2A2-->2E1 transitions. Cyclic voltammograms of 1 and 2 showed reversible oxidation couples at E1/2 = -0.28 V (for 2) and -0.25 V (for 1) vs ferrocenium/ferrocene (Fc+/Fc). The second oxidation exhibited a complicated behavior for both complexes. The reduction couples for 2 were observed at E1/2 = -0.61, -1.64, -1.97, and -2.42 V, and for 1 they were observed at E1/2 = -0.62, -1.60, -1.86, and -2.27 V vs Fc+/Fc. Spectral changes observed on chemical oxidation and reduction of the complexes are presented, and the behaviors of 1 and 2 are compared.     

Preparation and Tungsten-183 NMR Characterization of [alpha-1-P(2)W(17)O(61)](10)(-), [alpha-1-Zn(H(2)O)P(2)W(17)O(61)](8)(-), and [alpha-2-Zn(H(2)O)P(2)W(17)O(61)](8)(-)

The preparation of the alpha-1 and alpha-2 isomers of the Wells-Dawson 17 tungsto derivatives by standard methods is accompanied by a significant proportion of the other isomer present as an impurity. In this study, the alpha-1 and alpha-2 isomers of [Zn(H(2)O)P(2)W(17)O(61)](8)(-) have been prepared in >98% purity by reacting isomerically pure K(9)Li[alpha-1-P(2)W(17)O(61)] and K(10)[alpha-2-P(2)W(17)O(61)], respectively, with ZnCl(2), while rigorously controlling the pH at 4.7. The molecules were isolated as potassium salts. For (183)W NMR and (31)P NMR characterization, both molecules were ion exchanged by cation-exchange chromatography, maintaining the pH at 4.7, to obtain the lithium salts. Removal of water and isolation of a solid sample of [alpha-1-Zn(H(2)O)P(2)W(17)O(61)](8)(-) was achieved by lyophilization at -40 degrees C. The chemical shift data from (31)P and (183)W NMR spectroscopy of the isolated [alpha-1-Zn(H(2)O)P(2)W(17)O(61)](8)(-) and [alpha-2-Zn(H(2)O)P(2)W(17)O(61)](8)(-) isomers are consistent with a mixture of the alpha-1 and alpha-2 isomers reported previously;(1) the molecules have the expected C(1) and C(s)() symmetry, respectively. The [alpha-1-Zn(H(2)O)P(2)W(17)O(61)](8)(-) isomer is stable in the pH range of 4.6-6 at temperatures <35 degrees C. Using the same ion exchange and lyophilization techniques, the lacunary [alpha-1-P(2)W(17)O(61)](10)(-) isomer was isolated as the lithium salt; characterization by (183)W NMR spectroscopy confirms the C(1) symmetry.     

3He NMR study of (3)He@C(60)H(6) and (3)He@C(70)H(2)(-)(10)

The (3)He NMR of (3)He@C(60)H(6), (3)He@C(70)H(2), (3)He@C(70)H(4), (3)He@C(70)H(8), and (3)He@C(70)H(10) have been investigated. A new, unidentified C(60)H(6) isomer has been found by using (3)He NMR. (3)He@C(70)H(10) shows the most downfield-shifted (3)He NMR resonance among the neutral C(70) derivatives.     

Osmium Complexes of 1,4,7-Triazacyclononane (tacn) and 1,4,7-Trimethyl-1,4,7-triazacyclononane (Me(3)tacn) and the X-ray Crystal Structure of [(Me(3)tacn)Os(eta(6)-C(6)H(5)BPh(3))]BPh(4).CH(3)CN

The complexes of osmium with tacn (1,4,7-triazacyclononane) and Me(3)tacn (1,4,7-trimethyl-1,4,7-triazacyclononane), [LOs (eta(6)-C(6)H(6))](PF(6))(2) (L = tacn) and LOsCl(3) (L = tacn, Me(3)tacn), have been prepared by substitution of L on [Os(eta(6)-C(6)H(6))Cl(2)](2) or [Os(2)Cl(8)](2)(-), respectively. Reaction of LOsCl(3) with neat triflic acid leads to partial replacement of chloride and formation of the binuclear Os(III)-Os(III) complexes [LOs(&mgr;-Cl(3))OsL](PF(6))(3) (L = tacn, Me(3)tacn). The binuclear nature was established by NMR spectroscopy and elemental analysis and, for L = tacn, a partially refined X-ray crystal structure which shows the Os-Os separation to be 2.667 ?, indicative of significant metal-metal bonding. Reduction of [LOs(&mgr;-Cl(3))OsL](3+) over zinc amalgam in either aqueous or non-aqueous solution yields the intensely colored Os(II)-Os(III) mixed-valence ions [LOs(&mgr;-Cl(3))OsL](2+). Electrochemical measurements on [LOs(&mgr;-Cl(3))OsL](3+) in CH(3)CN reveal the reversible formation of the mixed valence ions. These are further reduced at lower potential to the Os(II)-Os(II) binuclear species, reversibly for L = Me(3)tacn. (Me(3)tacn)OsCl(3) is oxidized by persulfate ion to give [(Me(3)tacn)OsCl(3)](+); zinc amalgam reduction in an aqueous solution at high concentration produces the binuclear complex [(Me(3)tacn)Os(&mgr;-Cl(3))Os(Me(3)tacn)](3+) or, at low concentration, a solution containing an air sensitive osmium(II) species. Addition of BPh(4)(-) results in the eta(6)-arene zwitterion [(Me(3)tacn)Os(eta(6)-C(6)H(5)BPh(3))](+), which was characterized by X-ray diffraction on the BPh(4)(-) salt. The compound crystallizes in the triclinic space group P1 with a = 11.829(2) ?, b = 12.480(3) ?, c = 17.155(4) ?, alpha = 84.42(2) degrees, beta = 83.52(2) degrees, gamma = 71.45(2) degrees, V = 2380(2) ?(3), Z = 2, and R = 7.62%, and R(w) = 7.39%.     

Gas-phase ion chemistry in the ternary SiH(4)-C(3)H(6)-PH(3) system

Propene-phosphine and the silane-propene-phosphine gaseous mixtures were studied by ion trap mass spectrometry. For the binary mixture the variation of ion abundances under different partial pressures and the mechanisms of ion-molecule reactions are reported. Moreover, the rate constants of the main processes were measured and compared with the collisional rate constants to determine the reaction efficiencies. In the ternary silane-propene-phosphine mixture the mechanisms of formation of Si(m)C(n)P(p)H(+)(s) ion clusters were elucidated, but the complexity of the system and the low abundances of the ions usually isolated by successive steps prevented the determination of rate constants. The hydrogenated ternary ions are mainly formed by reactions of Si(r)P(s)H(+)(t) ions with propene, whereas a minor contribution comes from reactions of Si(m)C(n)H(+)(p) ions with phosphine. The C(v)P(w)H(+)(z) ions show very low reactivity with silane. The formation processes of these species are discussed in relation to their possible role as precursors of amorphous silicon carbides doped with phosphorus obtained by deposition from properly activated silane-propene-phosphine mixtures.     

Crystal structure of (acetylacetonato) (dicarbonyl)iridium(I)

The structure of Ir(CO)₂(acac) is determined by XRD at room temperature. Crystallographic data for C₇H₇IrO₄ are: a = 6.4798(5) ?, b = 7.7288(5) ?, c = 9.1629(10) ?, α = 105.738(2)°, β = 90.467(3)°, γ = 100.658(2)°, space group 1, P , V= 433.24(6) ?³, Z = 2, d _calc = 2.662 g/cm³, R = 0.0167. The structure is built of isolated mononuclear molecules. The central iridium atom has a square coordination environment formed by two oxygen atoms that belong to the acetylacetonate ligand and two carbon atoms of carbonyl groups. The average Ir-O and Ir-C bond lengths are 2.045(3) ? and 1.832(6) ? respectively. Molecules are stacked in such a way that the planes of coordination squares turn out to be parallel to the Ir...Ir distances between the nearest neighbors in the stack of 3.242 ? and 3.260 ?. Original Russian Text Copyright ? 2009 by K. V. Zherikova, N. V. Kuratieva, and N. B. Morozova __________ Translated from Zhurnal Strukturnoi Khimii, Vol. 50, No. 3, pp. 595–597, May–June, 2009.