CO2‐Triggered Switchable Hydrophilicity of a Heterogeneous Conjugated Polymer Photocatalyst for Enhanced Catalytic Activity in Water

Water compatibility for heterogeneous photocatalysts has been pursued for energy and environmental applications. However, there exists a trade‐off between hydrophilicity and recyclability of the photocatalyst. Herein, we report a conjugated polymer photocatalyst with tertiary amine terminals that reversibly binds CO₂ in water, thereby generating switchable hydrophilicity. The CO₂‐assisted hydrophilicity boosted the photocatalytic efficiency in aqueous medium with minimum dosage. When CO₂ was desorbed, the photocatalyst could be simply regenerated from reaction media, facilitating the repeated use of photocatalyst. Hydrophilicity/hydrophobicity control of the polymer photocatalyst was successfully showcased through a variety of organic photoredox reactions under visible‐light irradiation in water.     

Silicon surface modification with trialkoxysilyl‐functionalized star‐shaped polymers

The synthesis of trimethoxysilane end‐capped linear polystyrene (PS) and star‐branched PS and subsequent silicon (Si) surface modification with linear and star polymers are described. Trimethoxysilane terminated PS was synthesized using sec‐butyl lithium initiated anionic polymerization of styrene and subsequent end‐capping of the living anions with p‐chloromethylphenyl trimethoxysilane (CMPTMS). ¹H and ²⁹Si NMR spectroscopy confirmed the successful end‐capping of polystyryllithium with the trimethoxysilane functional group. The effect of a molar excess of end‐capper on the efficiency of functionalization was also investigated, and the required excess increased for higher molar mass oligomers. Acid catalyzed hydrolysis and condensation of the trimethoxysilane end‐groups resulted in star‐branched PS, and NMR spectroscopy and SEC analysis were used to characterize the star polymers. This is the first report of core‐functionalized star‐shaped polymers as surface modifiers and the first comparative study showing differences in surface topography between star and linear polymer modified surfaces. Surface‐sensitive techniques such as ellipsometry, contact angle goniometry, and AFM were used to confirm the attachment of star PS, as well as to compare the characteristics of the star and linear PS modified Si surfaces. The polymer film properties were referenced to polymer dimensions in dilute solution, which revealed that linear PS chains were in the intermediate brush regime and the star‐branched PS produced a surface with covalently attached chains in the mushroom regime. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3655–3666, 2005     

A glucose sensor via stable immobilization of the GOx enzyme on an organic transistor using a polymer brush

Recently, there has been significant research in the area of organic electrochemical transistors (OECTs) because of their superior aptitude of chemical and biological sensing. Here it is shown for the first time the incorporation of polymer brushes to a transistor. Polymer brushes were chosen for their biocompatible properties and their ability to covalently tether enzymes and other biomolecules to different surfaces. OECTs were fabricated from the conducting polymer poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate), PEDOT:PSS, and polymerized from the surface a mixed polymer brush of poly(glycidyl methacrylate) and poly(2-hydroxyethyl methacrylate). The brushes were functionalized with glucose oxidase and measured in terms of electrical performance and long-term stability. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 372–377     

等离子体改性聚合物表面动力学的动态接触角法研究

不同聚合物经CF~4/CH~4等离子体处理后,在浸水过程中表面动力学衰减常数对温度通过Arrhenius关系作图,对于所研究的聚合物都有一个明显的转折点。转折点处的温度称作表面构型转变温度(T~s),大约为15℃,与表面邻近水的Drost-Hansen温度一致。T~s以上及以下的活化能数值较小,说明表面构型变化的本质可看作是由于基团的翻转运动,而不需要整个大分子或链段的迁移运动。在浸水过程中,接触角滞后Δθ在表面构型转变温度T~s附近有转变,并有极小值,此后随着温度的升高出现极大值,继续升高温度接触角滞后Δθ又反而下降。     

Photocaged pendent thiol polymer brush surfaces for postpolymerization modifications via thiol‐click chemistry

In this work, a postpolymerization surface modification approach is reported that provides pendent thiol functionality along the polymer brush backbone using the photolabile protection chemistry of both o‐nitrobenzyl and p‐methoxyphenacyl thioethers. Poly(2‐hydroxyethyl methacrylate) (pHEMA) brushes were synthesized via surface‐initiated atom transfer radical polymerization, after which the pHEMA hydroxyl groups were esterified with 3‐(2‐nitrobenzylthio)propanoic acid or 3‐(2‐(4‐methoxyphenyl)‐2‐oxoethylthio)propanoic acid to provide the photolabile protected pendent thiols. Addressing the protecting groups with light not only affords spatial control of reactive thiol functionality but enables a plethora of thiol‐mediated transformations with isocyanates and maleimides providing a modular route to create functional polymer surfaces. This concept was extended to block copolymer brush architectures enabling the modification of the chemical functionality of both the inner and outer blocks of the block copolymer surface. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Enhanced cooperativity through design: pendant Co(III)--salen polymer brush catalysts for the hydrolytic kinetic resolution of epichlorohydrin (salen=N,N'-bis(salicylidene)ethylenediamine dianion)

The Co(III)--salen-catalyzed (salen=N,N'-bis(salicylidene)ethylenediamine dianion) hydrolytic kinetic resolution (HKR) of racemic epoxides has emerged as a highly attractive and efficient method of synthesizing chiral C(3) building blocks for intermediates in larger, more complex molecules. HKR reaction rates have displayed a second order dependency on the concentration of active sites, and thus researchers have proposed a bimetallic transition state for the HKR mechanism. Here we report the utilization of pendant Co(III)--salen catalysts on silica supported polymer brushes as a catalyst for the HKR of epichlorohydrin. The novel polymer brush architecture provided a unique framework for promoting site-site interactions as required in the proposed bimetallic transition state of the HKR mechanism. Furthermore, the polymer brushes mimic the environment of soluble polymer-based catalysts, whereas the silica support permitted facile recovery and reuse of the catalyst. The polymer brush catalyst displayed increased activities over the soluble Jacobsen Co--salen catalyst and was observed to retain its high enantioselectivities (>99 %) after each of five reactions despite decreasing activities. Analysis indicated decomposition of the salen ligand as an underlying cause of catalyst deactivation.