Ion transport properties of mechanically stable symmetric ABCBA pentablock copolymers with quaternary ammonium functionalized midblock

Anion exchange membranes (AEMs) are a promising class of materials for applications that require selective ion transport, such as fuel cells, water purification, and electrolysis devices. Studies of structure–morphology–property relationships of ion‐exchange membranes revealed that block copolymers exhibit improved ion conductivity and mechanical properties due to their microphase‐separated morphologies with well‐defined ionic domains. While most studies focused on symmetric diblock or triblock copolymers, here, the first example of a midblock quaternized pentablock AEM is presented. A symmetric ABCBA pentablock copolymer was functionalized to obtain a midblock brominated polymer. Solution cast films were then quaternized to obtain AEMs with resulting ion exchange capacities (IEC) ranging from 0.4 to 0.9 mmol/g. Despite the relatively low IEC, the polymers were highly conductive (up to 60 mS/cm Br^? at 90 °C and 95%RH) with low water absorption (<25 wt %) and maintained adequate mechanical properties in both dry and hydrated conditions. X‐ray scattering and transmission electron microscopy (TEM) revealed formation of cylindrical non‐ionic domains in a connected ionic phase. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 612–622     

Nanoscale 3D ordered polymer networks

Structures having nanoscale 3 D geometries are valuable as multifunctional materials, where multi-continuous microphases can synergistically influence mechanical, optical, transport and other properties. Such very high interface surface to volume ratio structures occur in a variety of materials including natural materials such as butter fly wings and sea urchin exoskeletons and in synthetic self-assembled structures such as surfactant/water systems and block polymers. Quantitative morphological characterization of such complex geometric structures is quite challenging. Unit cell sizes range from 10–300 nm with corresponding feature sizes on the 2–50 nm scale. Since these nanoscale network structures are bicontinuous, when one constituent is removed, the structure is still self supporting. Removal of one component produces a nanoporous material that may be in-filled with another component, or the surfaces of the nanopores can be coated with ultra-thin layers by atomic layer deposition to offer multifunctional capabilities. Due to the ability to individually tailor the properties of the network(s) and matrix,for example, to create strong dielectric or impedance contrast, such spatially periodic structures are excellent for the interference of waves(electromagnetic for photonic applications and acoustic for phononic applications) that can lead to bandgaps and hence the control of wave propagation in the material. This mini-review will focus on networks formed by bottom up self assembly of block polymers. In addition to structural issues, we emphasize the special physical properties related to bi-or tri-continuous networks.     

结冷胶与聚乙二醇丙烯酸酯双网络凝胶的制备及生物相容性评价

针对结冷胶脆性较大的问题,将聚乙二醇丙烯酸酯(PEGDA)引入结冷胶,通过紫外交联制备了结冷胶/PEGDA双网络凝胶,并对单组分凝胶和双网络凝胶的溶胀性能、微观形貌、拉伸力学性能、动态压缩性能和流变性能等进行比较.结果表明,双网络凝胶在类生理环境中具有较小的溶胀率和较好的尺寸稳定性,PEGDA的引入能够大幅度提高结冷胶的韧性,双网络凝胶的拉断伸长率可达340%,断裂能达1.01×103J/m2,与天然关节软骨相当.将成纤维细胞种植在凝胶内部进行体外三维立体培养,结果显示,细胞在凝胶内部生存状态良好,双网络凝胶的细胞负载率高于单网络结冷胶,说明该体系在生物医用领域具有良好的应用前景.     

2D Nanosheets and Their Composite Membranes for Water,Gas, and Ion Separation

Two‐dimensional nanosheets have shown great potential for separation applications because of their exceptional molecular transport properties. Nanosheet materials such as graphene oxides, metal–organic frameworks, and covalent organic frameworks display unique, precise, and fast molecular transport through nanopores and/or nanochannels. However, the dimensional instability of nanosheets in harsh environments diminishes the membrane performance and hinders their long‐term operation in various applications such as gas separation, water desalination, and ion separation. Recent progress in nanosheet membranes has included modification by crosslinking and functionalization that has improved the stability of the membranes, their separation functionality, and the scalability of membrane formation while the membranes’ excellent molecular transport properties are retained. These improvements have enhanced the potential of nanosheet membranes in practical applications such as separation processes.     

Water‐mediated transport in ion‐containing polymers

Water‐mediated ion conduction enables high conductivity in hydrated polymer membranes commonly used in electrochemical devices. Understanding the coupling of the absorbed water with the polymer matrix and the dynamics of water inside the polymer network across the full range of length scales in the membrane is important for unraveling the structure–property relationships in these materials. By considering the water behavior in ion‐containing polymers, next‐generation fuel cell membranes are being designed that exceed the conductivity of the state‐of‐the‐art materials and have optimized conductivity and permeability that may be useful in other types of devices such as redox flow batteries. Water–polymer associations can be exploited to tune the transport and mechanical property tradeoffs in these polymers. Measurements of water motion provide important criteria for assessing the factors that control the performance of these types of materials. This review article discusses current understanding of water behavior in ion‐containing polymers and the relationship between water motion and ion and molecular transport. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

2D Nanosheets and Their Composite Membranes for Water,Gas, and Ion Separation

Two‐dimensional nanosheets have shown great potential for separation applications because of their exceptional molecular transport properties. Nanosheet materials such as graphene oxides, metal–organic frameworks, and covalent organic frameworks display unique, precise, and fast molecular transport through nanopores and/or nanochannels. However, the dimensional instability of nanosheets in harsh environments diminishes the membrane performance and hinders their long‐term operation in various applications such as gas separation, water desalination, and ion separation. Recent progress in nanosheet membranes has included modification by crosslinking and functionalization that has improved the stability of the membranes, their separation functionality, and the scalability of membrane formation while the membranes’ excellent molecular transport properties are retained. These improvements have enhanced the potential of nanosheet membranes in practical applications such as separation processes.     

Nanophase segregation and water dynamics in the dendrion diblock copolymer formed from the Fréchet polyaryl ethereal dendrimer and linear PTFE

We propose a new material consisting of a dendrion copolymer formed from (a) a water-soluble dendritic polymer and (b) a hydrophobic backbone. Using molecular dynamics simulations techniques, we determine the structure and dynamics of the dendrion formed by second-generation Fréchet polyaryl ethereal dendrimer as the hydrophilic component and linear polytetrafluoroethylene (PTFE) as the hydrophobic polymer, with 5 and 10 wt % of water. We find that this material produces a well-developed nanoscale structure in which water forms a continuous nanophase, making this new family of compounds promising candidates for applications in fuel cell membranes. We find that the water molecules are incorporated into the dendrimer block of the copolymer to form a nanophase-segregated structure. The well-developed nanophase-segregated structures rendered by this material have characteristic dimensions of segregation ( approximately 30 Angstrom) and dendrimer conformational properties that are independent of water content. Calculations of water dynamics and proton transport in these nanophase-segregated structures indicate that the dendrion copolymer membrane with 10 wt % of water content has a water structure and transport properties equivalent to that of the hydrated Nafion membrane with 20 wt % of water content.     

The effect of water immersion and fibre content on properties of corn husk fibres reinforced thermoset polyester composite

This work presents an experimental investigation into the effect of cornhusk fibre (CHF) content upon the mechanical properties, water absorption behaviour, and swellability of CHF/polyester (PE) composites used in water environments. The CHF/PE was prepared at different volume fractions using hot compression (~175 °C). To investigate the rate of water absorption and swellability behaviours, composites were immersed in water for varying durations. The mechanical properties of composites (i.e. tensile, bending and compression strengths) immersed in water were carefully evaluated. The results indicate that the composites with an increased CHF content and a longer immersion time are prone to lower mechanical properties. The large amount of water absorbed by the composite reduces the bonding interface between CHF and PE, which is responsible for the damage. Moreover, the amount of water absorbed and the swellability increase with a corresponding increase in the CHF content. The lowest water absorption (2.39%) was detected in 20% CHF and 80% PE composite immersed for 6 days. The findings gathered in this research endorse CHF/polyester thermoset composites as a viable alternative for construction applications.     

Selecting polymers for medical devices based on thermal analytical methods

This biomaterials overview for selecting polymers for medical devices focuses on polymer materials, properties and performance. An improved understanding of thermoplastics and thermoset properties is accomplished by thermal analysis for device applications. The medical applications and requirements as well as the oxidative and mechanical stability of currently used polymers in devices are discussed. The tools used to aid the ranking of the thermoplastics and thermosets are differential scanning calorimetry (DSC), thermogravimetry (TG), thermal mechanical analysis (TMA) and dynamic mechanical analysis (DMA) as well as a number of key ASTM polymer tests. This paper will spotlight the thermal and mechanical characterization of the bio-compatible polymers e.g., olefins, nylon, polyacetals, polyvinyl chloride and polyesters.     

Synthesis, characterization and thermal studies on cellulose acetate membranes with additive

Cellulose acetate (CA) membranes are used in ultrafiltration applications, although they show low chemical, mechanical and thermal resistance. In order to prepare membranes with improved properties, modification of cellulose acetate with polyethelene glycol (PEG 600) has been attempted. In this study, CA has been mixed with PEG 600 as an additive in a polar solvent. The effects of CA composition and additive concentration given by a mixture design of experiments on membrane compaction, pure water flux, water content and membrane hydraulic resistance have been studied and discussed. The efficiency of protein separation by the developed CA membranes have been quantified using model proteins such as pepsin, egg albumin (EA) and bovine serum albumin (BSA). The thermal stability of the developed membranes prepared with PEG 600 additive has also been investigated using thermogravimetric analysis and differential scanning calorimetry.     

Emerging Materials for Interfacial Solar-Driven Water Purification

Solar-driven water purification is considered as an effective and sustainable technology for water treatment using green solar energy. One major goal for practical applications is to improve the solar evaporation performance by the design of novel photothermal materials, with optimized heat localization and water transport pathways to achieve reduced energy consumption for water vaporization. Recently, some emerging materials like polymers, metal-organic frameworks (MOFs), covalent organic frameworks (COFs) and also single molecules were employed to construct novel solar evaporation systems. In this minireview, we present an overview of the recent efforts on materials development for water purification systems. The state-of-the-art applications of these emerging materials for solar-driven water treatment, including desalination, wastewater purification, sterilization and energy production, are also summarized.     

Network structure and thermomechanical properties of hybrid DGEBA networks cured with 1‐methylimidazole and hyperbranched poly(ethyleneimine)s

The use of commercially available hyperbranched poly(ethyleneimine)s (Lupasol?, BASF) as polymeric modifiers in diglycidyl ether of bisphenol A thermosetting formulations using 1‐methylimidazole (MI) as anionic initiator has been studied. Poly(ethyleneimine)s can get incorporated into the network structure by condensation of amine and epoxy groups. The excess, over‐stoichiometric epoxy groups can undergo anionic homopolymerization initiated by MI. The thermal, dynamomechanical, and mechanical properties of the resulting materials have been determined using DSC, thermomechanical analysis (TMA), dynamomechanical analysis (DMA), and mechanical testing. The effect of the different amine modifiers on the MI networks, determined by their structure, is complex. Low initiator content and high molecular weight modifiers create significant mobility restrictions, which have a strong effect on the glass transition temperature and the apparent crosslinking density of the cured materials. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

磺化嵌段型共聚物在质子交换膜燃料电池中的应用*

燃料电池是以碳氢化合物为燃料的一种新型、清洁的发电装置,而其中的质子交换膜燃料电池由于具有可快速启动的优点而可应用于机动车等领域。所用的质子交换膜需要具有高的质子传导性、低的甲醇/水渗透性、好的机械和热稳定性以及合适的价格等特点,但目前已经工业化的Nafion膜并未能全部满足上述要求。为了解决这些问题,目前已经开发了多种新的质子交换膜。本文对其中的磺化嵌段型聚醚砜、磺化嵌段型聚酰亚胺和苯乙烯基嵌段共聚物在质子交换膜燃料电池中的应用进行了综述,并与Nafion膜和相应的无规共聚物的性能进行了比较。最后展望了嵌段共聚物在质子交换膜领域的发展趋势。     

不同磺化度下的磺化聚醚醚酮对全钒储能液流电池性质影响的研究

本文报道了采用浓硫酸作为磺化剂,成功合成了不同磺化度下的聚醚醚酮(PEEK)膜,并深入研究了磺化条件包括磺化时间和磺化剂的用量对所获薄膜性能的影响,获得了在不同磺化度（DS）下SPPEK膜的离子交换容,含水率,机械性能,质子电导率等参数,特别测定了在全钒液流电池工作条件下钒离子(Ⅳ)渗透率,首次为该类液流储能电池使用价廉质优的质子交换膜提供了基础实验数据。室温条件下的实验结果如下：1）磺化12小时后,膜的磺化度46%,含水量为28%,钒离子(Ⅳ)选择性最佳（钒离子渗透率为1.2×10-7 cm2/min-1,是Nafion117 (2.9×10-6 cm2/min-1)的1/24）,其质子电导率只有0.02 S/cm;2）磺化96小时其磺化度达79%的膜,质子电导率达0.16 S/cm,是Nafion117 (0.10S/cm) 的1.6倍, 但其机械性能最差;3）与Nafion117膜相比,磺化在36到48小时的SPPEK膜其机械力学性能好,薄膜的钒离子渗透率、离子交换容IEC、质子导电率和含水率高,且对钒离子的选择性佳,尤其价格仅为Nafion膜的1/13,是理想的Nafion膜的代替物,可望直接应用于全钒氧化还原液流（VRB）电池中。本文还讨论了磺化时间和不同磺化剂量对膜的性质的影响。     

Modification of single walled carbon nanotube surface chemistry to improve aqueous solubility and enhance cellular interactions

Single walled carbon nanotubes (SWNTs) continue to demonstrate the potential of nanoscaled materials in a wide range of applications. The ability to modulate the mechanical or electrical properties of a material by varying the SWNT component may result in diverse "application tunable" materials. Similarly, biomaterials used in tissue engineering applications may benefit from these characteristics by varying electrical and mechanical properties to enhance or direct tissue specific regeneration. The interactions between SWNTs and cellular systems need to be optimized to integrate these highly hydrophobic nanoparticles within an aqueous environment while maintaining their unique properties. We assessed solubility, conductance, and cellular interactions between four different SWNT preparations (unrefined, refined, and SWNT with either albumin or human plasma adsorbed). Initial interactions between cells and SWNTs were assessed within a 3D environment using a red blood cell lysis model, with longer-term interactions assessing the effects on PC12 and 3T3 fibroblast function when cultured on SWNT-collagen composite hydrogels. After SWNT purification, the lytic effect on red blood cells (RBCs) is significantly reduced from 11% to 0.7%, indicating manufacturing contaminants play a significant role in undesirable cell interactions. Nanotubes with either human plasma or albumin physisorbed onto the nanotube surface were significantly more hydrophilic than either unrefined or refined preparations and displayed improved RBC interactions. Despite improved dispersion, purification, and adsorption of either plasma or albumin, SWNTs caused a significant reduction in conductance. Although the molecular interactions occurring at the cell membrane remain unclear, these investigations have identified two main factors contributing to membrane failure: manufacturing impurities and to a lesser extend the material's innate hydrophobicity. Although purification is a critical step to remove toxic manufacturing contaminants, care must be taken to ensure improved aqueous dispersion does not compromise desirable mechanical and electrical attributes.     

pH敏感型聚谷氨酸/透明质酸基互穿网络医用水凝胶的制备及表征

生物材料是推动生物医学领域日新月异变化的基石,医用水凝胶作为重要成员,近年来表现出蓬勃发展的态势。文章介绍了一种新型可注射的、以生物相容性方法交联的聚谷氨酸(Poly (γ-glutamic acid), PGA)/透明质酸(Hyaluronic acid, HA)复合水凝胶。研究首先采用EDC/NHS方法合成了酪胺(Tyramine,Ty)接枝聚谷氨酸的PGA-Ty前体大分子及半胱胺(Cysteamine, CA)修饰透明质酸的HA-CA前体大分子。两种前体大分子的结构分别使用核磁和红外进行了确证。得到的两种前体大分子在低浓度双氧水和辣根过氧化物酶(Horseradish Peroxidase, HRP)的共同作用下,于水相中交联得到互穿网络(Interpenetrating Network, IPN)水凝胶。实验对IPN水凝胶样品的系列性能,如平衡含水量、内部形貌、酶降解速率以及力学性能等进行了测试,并选取了盐酸四环素为药物模型对凝胶的体外药物释放行为、体外抗菌效果进行了测评。凝胶材料的细胞毒性及凝胶支架对细胞3D培养的效果证明其生物相容性优异,体外包埋的细胞经72h培养,未表现出明显细胞毒性。系列数据证明,该种水凝胶可以设计成为pH敏感型的药物控释载体材料,并因其良好的生物相容性,也有作为细胞支架、创伤辅料等其它生物医用材料的潜力。     

Cation‐Transporting Peptides: Scaffolds for Functionalized Pores?

Protein pores that selectively transport ions across membranes are among nature’s most efficient machines. The selectivity of these pores can be exploited for ion sensing and water purification. Since it is difficult to reconstitute membrane proteins in their active form for practical applications it is desirable to develop robust synthetic compounds that selectively transport ions across cell membranes. One can envision tuning the selectivity of pores by incorporating functional groups inside the pore. Readily accessible octapeptides containing (aminomethyl)benzoic acid and alanine are reported here that preferentially transport cations over halides across the lipid bilayer. Ion transport is hypothesized through pores formed by stable assemblies of the peptides. The aromatic ring(s) appear to be proximal to the pore and could be potentially utilized for functionalizing the pore interior.     

Water Adsorption and Transport on Oxidized Two-Dimensional Carbon Materials

Studies on the adsorption and transport of water molecules with oxidized two-dimensional (2 D) carbon materials have attracted increasing interest owing to their wide range of applications, such as sensing, energy conversion, and membrane separation. In this contribution, the interaction between water molecules and oxidized 2 D carbon materials (i.e., graphene oxide and graphdiyne oxide) is discussed, the influence of water adsorption and transport on the physicochemical properties of 2 D carbon materials is presented, and the recent progress on oxidized 2 D carbon material-based proton conduction, electricity generation, water transport, and humidity sensing is highlighted. The opportunities and challenges in these research fields are discussed, especially the structural stability and chemical modification of 2 D carbon materials.     

Electrochemical characterization of hydrogels for biomimetic applications

Hydrogels are increasingly being recognized as having potential in bio‐compatible applications. In previous work, we investigated the feasibility of poly(ethylene glycol)‐dimethacrylate (PEG‐1000‐DMA) and poly(ethylene glycol)‐diacrylate (PEG‐400‐DA) polymerized using either a chemical initiator (C) or a photoinitiator (P) to encapsulate and stabilize biomimetic membranes for novel separation technologies or biosensor applications. In this paper, we have investigated the electrochemical properties of the hydrogels used for membrane encapsulation. Specifically, we studied the crosslinked hydrogels by using electrochemical impedance spectroscopy (EIS), and we demonstrated that chemically crosslinked hydrogels had lower values for the effective electrical resistance and higher values for the electrical capacitance compared with hydrogels with photoinitiated crosslinking. Transport numbers were obtained using electromotive force measurements and demonstrated that at low salt concentrations, both PEG‐400‐DA‐C and PEG‐400‐DA‐P hydrogels presented an electropositive character whereas PEG‐1000‐DMA‐P was approximately neutral and PEG‐1000‐DMA‐C showed electronegative character. Sodium transport numbers approached the bulk NaCl electrolyte value at high salt concentrations for all hydrogels, indicating screening of fixed charges in the hydrogels. The average salt diffusional permeability 〈P_s〉 and water permeability 〈P_w〉 were found to correlate with EIS results. Both PEG‐1000‐DMA‐C and PEG‐400‐DA‐C had higher 〈P_s〉 and 〈P_w〉 values than PEG‐1000‐DMA‐P and PEG‐400‐DA‐P hydrogels. In conclusion, our results show that hydrogel electrochemical properties can be controlled by the choice of polymer and type of crosslinking used and that their water and salt permeability properties are congruent with the use of hydrogels for biomimetic membrane encapsulation. Copyright © 2011 John Wiley & Sons, Ltd.     

Ultrahigh-water-content supramolecular hydrogels exhibiting multistimuli responsiveness

Hydrogels are three-dimensional networked materials that are similar to soft biological tissues and have highly variable mechanical properties, making them increasingly important in a variety of biomedical and industrial applications. Herein we report the preparation of extremely high water content hydrogels (up to 99.7% water by weight) driven by strong host-guest complexation with cucurbit[8]uril (CB[8]). Cellulosic derivatives and commodity polymers such as poly(vinyl alcohol) were modified with strongly binding guests for CB[8] ternary complex formation (K(eq) = 10(12) M(-2)). When these polymers were mixed in the presence of CB[8], whereby the overall solid content was 90% cellulosic, a lightly colored, transparent hydrogel was formed instantaneously. The supramolecular nature of these hydrogels affords them with highly tunable mechanical properties, and the dynamics of the CB[8] ternary complex cross-links allows for rapid self-healing of the materials after damage caused by deformation. Moreover, these hydrogels display responsivity to a multitude of external stimuli, including temperature, chemical potential, and competing guests. These materials are easily processed, and the simplicity of their preparation, their availability from inexpensive renewable resources, and the tunability of their properties are distinguishing features for many important water-based applications.