Speciation of Aluminium in Mixtures of the Ionic Liquids [C3mpip][NTf2] and [C4mpyr][NTf2] with AlCl3: An Electrochemical and NMR Spectroscopy Study

This paper reports on the electrodeposition of aluminium on several substrates from the air‐ and water‐stable ionic liquids 1‐propyl‐1‐methylpiperidinium bis(trifluoromethylsulfonyl)amide ([C₃mpip][NTf₂]) and 1‐butyl‐1‐methylpyrrolidinium bis(trifluoromethylsulfonyl)amide ([C₄mpyr][NTf₂]), which contain anhydrous AlCl₃. At an AlCl₃ concentration of 0.75 molal, no evidence for aluminium electrodeposition was observed in either system at room temperature. However, aluminium electrodeposition becomes feasible upon heating the samples to 80 °C. Aluminium electrodeposition from bis(trifluoromethylsulfonyl)amide‐based ionic liquids that contain AlCl₃ has previously been shown to be very dependent upon the AlCl₃ concentration and has not been demonstrated at AlCl₃ concentrations below 1.13 molal. The dissolution of AlCl₃ in [C₃mpip][NTf₂] and [C₄mpyr][NTf₂] was studied by variable‐temperature ²⁷Al NMR spectroscopy to gain insights on the electroactive species responsible for aluminium electrodeposition. A similar change in the aluminium speciation with temperature was observed in both ionic liquids, thereby indicating that the chemistry was similar in both. The electrodeposition of aluminium was shown to coincide with the formation of an asymmetric four‐coordinate aluminium‐containing species with an ²⁷Al chemical shift of δ=94 and 92 ppm in the [C₃mpip][NTf₂]–AlCl₃ and [C₄mpyr][NTf₂]–AlCl₃ systems, respectively. It was concluded that the aluminium‐containing species that give rise to these resonances corresponds to the electroactive species and was assigned to [AlCl₃(NTf₂)]^?.     

Heat capacity and phase transitions of a mixture of ionic liquids [C2mim]NTf2 + [C6mim]NTf2

The 1-ethyl-3-methylimidazolium bistriflamide + 1-hexyl-3-methylimidazolium bistriflamide ([C₂mim]NTf₂ + [C₆mim]NTf₂) system was investigated by adiabatic calorimetry over the temperature range 80–370 K. It was found that, at T < 250 K, the system formed several solid phases of different compositions.     

Comparison of Force Fields on the Basis of Various Model Approaches—How To Design the Best Model for the [CnMIM][NTf2] Family of Ionic Liquids

In this contribution, we present two new united‐atom force fields (UA‐FFs) for 1‐alkyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide [C_nMIM][NTf₂] (n=1, 2, 4, 6, 8) ionic liquids (ILs). One is parametrized manually, and the other is developed with the gradient‐based optimization workflow (GROW). By doing so, we wanted to perform a hard test to determine how researchers could benefit from semiautomated optimization procedures. As with our already published all‐atom force field (AA‐FF) for [C_nMIM][NTf₂] (T. Köddermann, D. Paschek, R. Ludwig, ChemPhysChem­ 2007, 8, 2464 ), the new force fields were derived to fit experimental densities, self‐diffusion coefficients, and NMR rotational correlation times for the IL cation and for water molecules dissolved in [C₂MIM][NTf₂]. In the manual force field, the alkyl chains of the cation and the CF₃ groups of the anion were treated as united atoms. In the GROW force field, only the alkyl chains of the cation were united. All other parts of the structures of the ions remained unchanged to prevent any loss of physical information. Structural, dynamic, and thermodynamic properties such as viscosity, cation rotational correlation times, and heats of vaporization calculated with the new force fields were compared with values simulated with the previous AA‐FF and the experimental data. All simulated properties were in excellent agreement with the experimental values. Altogether, the UA‐FFs are slightly superior for speed‐up reasons. The UA‐FF speeds up the simulation by about 100 % and reduces the demanded disk space by about 78 %. More importantly, real time and efforts to generate force fields could be significantly reduced by utilizing GROW. The real time for the GROW parametrization in this work was 2 months. Manual parametrization, in contrast, may take up to 12 months, and this is, therefore, a significant increase in speed, though it is difficult to estimate the duration of manual parametrization.     

Efficient synthesis of cefadroxil in [Bmim][NTf2]‐phosphate cosolvent by magnetic immobilized penicillin G acylase

For the first time, cefadroxil was synthesized from 7‐Amino‐3‐desacetoxycephalosporanic acid and d ‐hydroxyphenylglycine methyl ester in [Bmim][NTf₂]‐phosphate cosolvent capable of dissolving the substrates using the penicillin G acylase (PGA) immobilized on the micrometer‐size magnetic polymer microspheres having high activity of 2,083 U/g. The high synthesis/hydrolysis (S/H) ratio of 1.12 was achieved with 79.0% yield, where only the S/H ratio of 0.19 and yield of 20.0% was obtained using free PGA under the identical optimum reaction conditions. Cefadroxil had been synthesized efficiently in [Bmim][NTf₂]‐phosphate cosolvent by the magnetic immobilized PGA, which illuminated that there are two very critical and essential designs, that is, effective support and suitable solvent system by PGA, in enzymatic synthesis of cefadroxil. Obviously, there is great potential for the magnetic immobilized PGA and ionic liquid solvent in application to biocatalysis.     

Electrochemical Determination of Manganese Solubility in Mercury via Amalgamation and Stripping in the Room Temperature Ionic Liquid n‐Hexyltriethylammonium Bis(trifluoromethanesulfonyl)imide, [N6,2,2,2][NTf2]

The solubility of manganese in mercury was determined electrochemically via amalgamation and stripping in the room temperature ionic liquid n‐hexyltriethylammonium bis(trifluoromethanesulfonyl)imide, [N_6,2,2,2][NTf₂]. A hemispherical mercury electrode was made by electrodepositing mercury onto a planar platinum microelectrode. Cyclic voltammetry of Mn²⁺ in [N_6,2,2,2][NTf₂] at the mercury microhemisphere electrode was investigated at temperatures of 298, 303 and 313 K. The solubility of Mn in Hg was determined on the basis of the charge under the reduction peak (Mn²⁺→Mn⁰) and the corresponding reoxidation.     

Morphology,Structure, and Dynamics of Pentacene Thin Films and Their Nanocomposites with [C2C1im][NTf2] and [C2C1im][OTF] Ionic Liquids

In this study, a homogeneous thin film growth of pentacene onto indium tin oxide (ITO) coated glass surfaces is explored using a high-resolution and reproducible vapor deposition methodology. Moreover, vacuum thermal evaporation of ionic liquids (ILs) ([C₂C₁im][NTf₂] and [C₂C₁im][OTF]) onto ITO, gold/palladium (AuPd) and pentacene surfaces were performed. A greater wettability behavior of ILs is observed for surfaces containing AuPd. Sequential and simultaneous depositions of ILs and pentacene were explored. Simultaneous depositions lead to the formation of nanocomposites films, consisting of IL micro- and nanodroplets covered by pentacene layers. Plasma surface treatment was used to induce the ILs droplets coalescence and explore the dynamics and phase separation of the nanocomposites. The [C₂C₁im][OTF] droplets were found to be completely covered with pentacene, which suggests a great affinity between cation-anion pairs and the aromatic moiety. Pentacene films and their nanocomposites with ILs exhibit a typical optical band gap of E_gap=1.77 eV, indicating that the nanocomposite phase domains are large enough to behavior as the bulk.     

Microwave-accelerated Claisen rearrangement in bicyclic imidazolium [b-3C-im][NTf2] ionic liquid

With microwaves, a chemically stable ionic liquid [b-3C-im][NTf₂] recently developed in our laboratory was used as solvent and successfully applied to accelerate Claisen rearrangement reactions at high temperatures. In the presence of Lewis acid MgCl₂, these thermal rearrangements could be achieved in similar reaction times but at lower temperature. For the microwaved reactions studied in this work, without scarifying isolated yields, the reaction times were significantly reduced from hours (by conventional heating) to ≤3 min. Our result also demonstrated that [b-3C-im][NTf₂] ionic liquid was a useful solvent substitute and could be recycled multiple times for the studied rearrangement reaction at elevated temperatures.     

Calorimetric Study on the Ion Pairing and Aggregation of 1-Ethyl-3-Methylimidazolium bis(trifluoromethylsulfonyl)amide ([C2mim][NTf2]) and Related Ionic Liquids in the Low-Dielectric Constant Solvent Chloroform

A calorimetric study of dissolution of the ionic liquids (ILs) 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ([C₂mim][NTf₂]), 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)amide ([C₆mim][NTf₂]), and 1-hexyl-3-methylimidazolium tris(trifluoromethylsulfonyl)methide ([C₆mim][CTf₃]) into chloroform (CHCl₃) is presented with particular focus on [C₂mim][NTf₂]. The interpretation of the calorimetric data for [C₂mim][NTf₂] was aided by additional NMR self-diffusion measurements and viscosity measurements that through the Stokes–Einstein equation provided information about the average size of the species present. It is evident that the main equilibrium species are ion pairs and aggregates. An estimate for the enthalpy contribution from aggregate formation for [C₂mim][NTf₂] was found to be ?2.09 kJ per mol of added IL at 288.2 K and slightly decreasing in magnitude to ?1.11 kJ·mol^?1 at 318.2 K. While all three ILs release heat upon dissolution into CHCl₃, different temperature trends are observed demonstrating the fine balance of competing contributions from breaking IL interactions, cavity formation for the solutes to reside in, and the establishment of new solute–solvent interactions.     

Radiation-induced darkening of ionic liquid [C4mim][NTf2] and its decoloration

The radiation effect on a hydrophobic room-temperature ionic liquid (RTIL), 1-butyl-3-methyl-imidazolium bis[(trifluoromethyl)sulfonyl]imide ([C₄mim][NTf₂]), was studied by γ-irradiation under nitrogen atmosphere. Accompanied by color darkening and increase of light absorbance in a wide wavelength range, a distinct absorption peak at around 290 nm for irradiated [C₄mim][NTf₂] appeared when acetonitrile was used as solvent, and the intensity of the peak enhanced with increasing dose. The spectrophotometric study on the irradiated RTILs containing 1,3-dialkylimidazolium cations associated with different inorganic anions revealed that the peak is ascribed to the radiolysis products of the [C₄mim]⁺. And the wavelength of the peak was affected by alkyl chain length on imidazolium cation, while the intensity of the peak was influenced by anions. With incorporating a little amounts of oxidants, such as KMnO₄ and HNO₃ into irradiated [C₄mim][NTf₂], the intensity of the peak at 290 nm decreased obviously and the decoloration of [C₄mim][NTf₂] occurred, suggesting that the peak at 290 nm is assigned to the colored species and the species can be oxidized.     

Bicyclic imidazolium-based ionic liquids: synthesis and characterization

We previously reported the use of imidazole as starting compound for preparing a bicyclic imidazolium ionic liquid, [b-3C-im][NTf₂], with an overall 29% isolated yield in four synthetic steps. This new room temperature ionic liquid was shown to be far more chemically stable than commonly used [bmim][PF₆], [bdmim][PF₆], and [bdmim][NTf₂]. Because of this intriguing chemical stability, it prompted us to develop a more generalized and high yielding synthesis so that molecular diversity of bicyclic ionic liquids may be explored. In this work, we amended the previous synthetic route by employing 4-chlorobutyronitrile or 5-chlorovaleronitrile as starting materials and successfully developed a five-step synthesis of a series of novel bicyclic imidazolium-based ionic liquids in 40-53% overall isolated yields. We investigated intrinsic reactivity of all bicyclic ionic liquids prepared and found that, under strongly basic conditions, among all tested ionic liquids the 5,5-membered [R-3C-im][NTf₂] ionic liquids were most stable to solvent deuterium isotope exchange while the previously reported [bdmim][NTf₂] ionic liquid was 50% deuterium exchanged at its C-2 methyl in 30 min at ambient temperature. Under identical condition, the commonly used [bmim][NTf₂] ionic liquid was deuterium exchanged instantaneously at its C-2 hydrogen. In the absence of bases, only [bmim][PF₆] was deuterium exchanged (50% within 1 h) and all other ionic liquids gave no detectable exchanges even after 25 days at ambient temperature. Moreover, both [bmim][NTf₂] and [bdmim][NTf₂] ionic liquids were readily methylated at C-2 position with methyl iodide under basic condition at room temperature. Under the same condition, [R-3C-im][NTf₂] and [R-4C-im][NTf₂] ionic liquids were completely stable and chemically inert. We envisioned that [R-3C-im][NTf₂] should be well suited as solvents for organic synthesis.     

Copper(I) and Silver(I) Bis(trifluoromethanesulfonyl)imide and Their Interaction with an Arene,Diverse Olefins,and an NTf2−‐Based Ionic Liquid

The chemistry of coinage metal bis(triflyl)imides of technological interest, CuNTf₂ and AgNTf₂, their synthesis and complexes with excess of comparatively weakly coordinating NTf₂^? as well as with ether, olefins, and the arene mesitylene are described. The existence of the solvent‐free pure phase [CuNTf₂]_∞ has not been evidenced so far. Contrary to the literature, in which the preparation of [CuNTf₂]_∞ is supposed to be carried out by reacting mesityl copper, [Cu(Mes)]₅, and HNTf₂, we found that in fact this reaction leads reproducibly to the interesting copper diarene sandwich complex [Cu(η³‐MesH)₂][Cu(NTf₂)₂] ( 1 ) (MesH=1,3,5‐trimethylbenzene). The unexpectedly stable molecular etherate [Cu(Et₂O)(NTf₂)] ( 2 ) turned out to be the best precursor for CuNTf₂ having only an inert and easily exchangeable solvent ligand. The coordination mode of NTf₂^? in 1 and 2 as well as in the hitherto unknown crystalline phase of [AgNTf₂]_∞ ( 3 ) is described. The complex formation, which takes place when dissolving 2 or 3 in the room temperature ionic liquid (RTIL) [emim]NTf₂ ([emim]⁺=1‐ethyl‐3‐methylimidazolium), has been studied. Furthermore, the reaction of 1 – 3 towards the diolefins 1,5‐cyclooctadiene (COD), 2,5‐norbornadiene (NBD) and isoprene (2‐methylbuta‐1,3‐diene) and towards ethylene has been investigated. The products 4 – 13 of these conversions have been isolated and fully characterized by NMR‐ and IR spectroscopies, mass spectrometry, and elemental‐ and XRD analyses. The potential of [Cu(η³‐MesH)₂][Cu(NTf₂)₂] ( 1 ), [Cu(Et₂O)(NTf₂)] ( 2 ) and [AgNTf₂]_∞ ( 3 ) as well as of [emim][M(NTf₂)₂] (M=Cu 4 , Ag 5 ) as chemisorbers for ethylene was studied by NMR spectroscopy.     

Structure-property relationships in ILs: A study of the alkyl chain length dependence in vaporisation enthalpies of pyridinium based ionic liquids

The enthalpies of vaporization for the series of pyridinium-based ionic liquids with bis(trifluoromethylsulfonyl)imide anion [CnPy][NTf2] (n = 2, 3, 4, 5, and 6) have been determined with the quartz crystal microbalance technique combined with the Langmuir evaporation. The linear dependence of vaporization enthalpies on the chain length has been revealed. New approach based on volumetric, surface tension, and speed of sound measurements has been developed for estimation of heat capacity differences between gas and liquid phase, which were required for adjustment of measured vaporization enthalpies to the ref- erence temperature 298 K.     

1-Butyl-2,3-trimethyleneimidazolium bis(trifluoromethylsulfonyl)imide ([b-3C-im][NTf2]): a new, stable ionic liquid

Using imidazole as the starting material, the synthesis of a new bicyclic ionic liquid [b-3C-im][NTf₂] is described. Except for the alkylation reaction in the second step (40% yield) of this four-step synthesis of [b-3C-im][NTf₂], others were all high yielding reactions (85-94% isolated yields). We investigated intrinsic reactivity of this and other imidazolium-based ionic liquids and found that, under strongly basic conditions (KOD in CD₃OD/D₂O (1:1) solution), the new ionic liquid was stable to solvent deuterium isotope exchange while the previously reported [bdmim][NTf₂] and [bdmim][PF₆] ionic liquids were 50% deuterium exchanged at its C-2 methyl in 30 min at ambient temperature. At the same experimental condition, the most commonly employed [bmim][PF₆] ionic liquid was deuterium exchanged instantaneously at its C-2 hydrogen. In the absence of bases (CD₃OD/D₂O = 1:1), only [bmim][PF₆] was deuterium exchanged (50% within 1 h) and other ionic liquids gave no detectable exchanges even after one week at ambient temperature. It is therefore concluded that the new [b-3C-im][NTf₂] ionic liquid is far more chemically stable than previously reported [bmim][PF₆], [bdmim][NTf₂], and [bdmim][PF₆].     

Aprotic Ionic Liquids: A Framework for Predicting Vaporization Thermodynamics

Ionic liquids (ILs) are recognized as an environmentally friendly alternative to replacing volatile molecular solvents. Knowledge of vaporization thermodynamics is crucial for practical applications. The vaporization thermodynamics of five ionic liquids containing a pyridinium cation and the [NTf₂] anion were studied using a quartz crystal microbalance. Vapor pressure-temperature dependences were used to derive the enthalpies of vaporization of these ionic liquids. Vaporization enthalpies of the pyridinium-based ionic liquids available in the literature were collected and uniformly adjusted to the reference temperature T = 298.15 K. The consistent sets of evaluated vaporization enthalpies were used to develop the “centerpiece”-based group-additivity method for predicting enthalpies of vaporization of ionic compounds. The general transferability of the contributions to the enthalpy of vaporization from the molecular liquids to the ionic liquids was established. A small, but not negligible correction term was supposed to reconcile the estimated results with the experiment. The corrected “centerpiece” approach was recommended to predict the vaporization enthalpies of ILs.     

The thermochemistry of solvation of imidazolium-based ionic liquids in benzene

ABSTRACT

The present work is devoted to the thermochemical study of solvation of ionic liquids (IL) in benzene. The solution enthalpies of 1-ethyl-3-methylimidazolium tricyanomethanide [EMIM][C(CN)₃], 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF₄], 1-hexyl-3-methylimidazolium hexafluorophosphate [HMIM][PF₆], 1-octyl-3-methylimidazolium tetrafluoroborate [OMIM][BF₄], 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [EMIM][NTf₂], 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [BMIM][NTf₂] and 1-butyl-3-methylimidazolium trifluoromethanesulfonate [BMIM][TfO] in benzene were measured. The solvation enthalpies of imidazolium-based IL were calculated. Molar refractions of imidazolium-based IL form literature data on density and refractive indexes of IL were also calculated. The linear correlation between solvation enthalpy and molar refraction of IL was observed. This correlation can be used to calculate the vaporization enthalpy of imidazolium-based IL from solution calorimetry data.     

Formation of metastable crystals of [C4mim][NTf2] and [C6mim][NTf2]

Heat capacities of crystalline 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [C₄mim][NTf₂] and 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [C₆mim][NTf₂] in the range 80 K-T_fus were measured in an adiabatic calorimeter. Anomalies in the heat-capacity curves for the both compounds occurred near 240 K. Positions of the anomalies depended on thermal history of the samples. More stable crystals had higher heat capacities in the range 220-260 K. Below 200 K heat capacities of all the crystals of the same compound were indistinguishable.     

Synthesis of batracylin and its N-sulfonamido analogues in [b-3C-im][NTf2] ionic liquid

Starting with commercial and inexpensive reagents, a high-yielding chemical process carried out in [b-3C-im][NTf₂] ionic liquid was achieved to afford the synthesis of batracylin and its N-sulfonamido analogues. Among all compounds synthesized, compounds 1, 11, and 14 exhibit potent inhibitory activity against human topoisomerase 1 (hTop1).     

Separation of aromatic hydrocarbons from alkanes using ammonium ionic liquid C2NTf2 at T = 298.15 K

(Liquid + liquid) equilibrium data are presented for four ternary systems of an alkane, or aromatic compound and ethyl(2-hydroxyethyl)dimethylammonium bis{(trifluomethyl)sulfonyl}imide (C₂NTf₂) at 298.15 K: [hexane + benzene + C₂NTf₂], [hexane + p-xylene + C₂NTf₂], and [hexane, or octane + m-xylene + C₂NTf₂]. The separation of aromatic hydrocarbons (benzene, or p-xylene, or m-xylene) from aliphatic hydrocarbons (hexane, or octane) is investigated by extraction with the ammonium ionic liquid. Selectivities and distribution ratios are discussed for these mixtures at constant temperature. The data were analysed and compared to those previously reported for other ionic liquids and especially for the system {hexane + benzene + [EMIM][NTf₂]}. The nonrandom two liquid NRTL model was successfully used to correlate the experimental tie-lines and to calculate the phase compositions of the ternary systems.     

Thermodynamic properties of mixtures containing ionic liquids: Activity coefficients of aldehydes and ketones in 1-methyl-3-ethyl-imidazolium bis(trifluoromethyl-sulfonyl) imide using the transpiration method

Vapor–liquid equilibria (VLE) of binary mixtures containing the high boiling solutes: nonan-1-al, 4-methyl-benzaldehyde, nonan-2-one, and 4-phenylbutan-2-one and the ionic liquid (IL) [EMIM][NTf₂] were studied by using the transpiration method. VLE measurements were carried out over the whole concentration range at different temperatures between 298 and 323 K. Activity coefficients γ_i of these solvents in the ionic liquid have been determined from these data using the NRTL-equation. In addition vapor pressures of the pure solutes 4-methyl-benzaldehyde, nonan-2-one and 4-phenylbutan-2-one have been measured as function of temperature and their enthalpies of vaporization have been obtained.