Double hydrophilic diblock copolymers containing a poly(ionic liquid) segment: Controlled synthesis, solution property, and application as carbon precursor

In this contribution, we demonstrate the controlled synthesis of double hydrophilic block copolymers comprising a hydrophilic poly(ionic liquid) (PIL) segment via the RAFT/MADIX process. The non-ionic segment is made up from either poly(N-isopropylacrylamide) (PNIPAAm) or poly(N,N-dimethylacrylamide) (PDMA), due to their favorable controllable solubility in water at room temperature. They were employed as macro-chain transfer agents (macro-CTAs) for the RAFT polymerization of four different 1-vinylimidazolium ionic liquid monomers possessing different alkyl substitutes and anions. The block copolymers of PNIPAAm-b-PIL are dual stimuli-responsive copolymers that can respond to the changes in temperature and ionic strength in aqueous solution. This special property facilitated a facile anion exchange of the PIL segment. In addition, one copolymer could successfully be employed as carbon precursor for the preparation of mesoporous graphitic nanostructures in the presence of metal salts.     

Characterization and degradation of the poly(methylphenylsiloxane)–poly(methyl methacrylate) graft copolymer

Poly(methylphenylsiloxane)–poly(methyl methacrylate) graft copolymers (PSXE-g-PMMA) were prepared by condensation reaction of poly(methylphenylsiloxane)-containing epoxy resin (PSXE) with carboxyl-terminated poly(methyl methacrylate) (PMMA), and they were characterized by gel permeation chromatography (GPC), infrared (IR), and ²⁹Si and ¹³C nuclear magnetic resonance (NMR). The microstructure of the PSXE-g-PMMA graft copolymer was investigated by proton spin–spin relaxation T₂ measurements. The thermal stability and apparent activation energy for thermal degradation of these copolymers were studied by thermogravimetry and compared with unmodified PMMA. The incorporation of poly(methylphenylsiloxane) segments in graft copolymers improved thermal stability of PMMA and enhanced the activation energy for thermal degradation of PMMA. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2521–2530, 1998     

Porous Poly(Ionic Liquid) Membranes as Efficient and Recyclable Absorbents for Heavy Metal Ions

Heavy metal ion pollution has become a serious environmental problem. Herein, this study reports the synthesis of poly(ionic liquid) (PIL) membranes via in situ photo‐crosslinking of vinyl imidazole with both hydrophilic and hydrophobic ionic liquid monomers. The resultant amphiphilic polymer membranes are porous and exhibit high absorption capacity of metal ions (including Hg²⁺, Pb²⁺, Cu²⁺, Cd²⁺, and Zn²⁺) in both high (1000 mg L⁻¹) and low (10 mg L⁻¹) concentration metal ion solutions. These metal ionic absorption membranes are easily regenerated in acid solution and can be reused without significant decreases of absorption capacity after many cycles. These PIL membranes may have potential applications as eco‐friendly and safe heavy metal ion removal materials.

     

Preparation of main‐chain imidazolium‐functionalized amphiphilic block copolymers through combination of condensation polymerization and nitroxide‐mediated free radical polymerization and their micelle study

Main‐chain imidazolium‐functionalized amphiphilic block copolymers (PIL‐b‐PS) consisting of polyionic liquid (PIL) and polystyrene (PS) blocks have been first synthesized by condensation polymerization combined with nitroxide‐mediated free radical polymerization (NMP). The di‐functional imidazolium‐based ionic liquid (IL) having both hydroxyl and ester end groups was synthesized through Michael addition between imidazole and methylacrylate (MA) and further quaternization by 2‐chloroethanol. The HTEMPO (4‐hydroxy‐2,2,6,6‐tetramethyl‐1‐piperidinyloxy) terminated polyionic liquid (HTEMPO‐PIL) as the hydrophilic block was prepared by condensation polymerization of di‐functional imidazolium IL and HTEMPO at a certain ratio. The hydrophobic PS block was synthesized by controlled radical polymerization of styrene using HTEMPO‐PIL through NMP, resulting PIL‐b‐PS block copolymers. The structure of block copolymers obtained has been characterized and verified by FTIR, ¹H NMR, and size exclusion chromatography analyses. In addition, the morphology and size of the micelles formed by PIL‐b‐PS block copolymers in water were investigated by transmission electron microscopy and dynamic light scattering. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Preparation and characterization of PVDF‐based blend membranes as polymer electrolyte membranes in fuel cells: Study of factor affecting the proton conductivity behavior

There is a huge demand especially for polyvinylidene fluoride (PVDF) and its copolymers to provide high performance solid polymer electrolytes for use as an electrolyte in energy supply systems. In this regard, the blending approach was used to prepare PVDF‐based proton exchange membranes and focused on the study of factor affecting the ir proton conductivity behavior. Thus, a series of copolymers consisting of poly (methyl methacrylate) (PMMA), polyacrylonitrile (PAN), and poly(2‐acrylamido‐2‐methyl‐l‐propanesulfonic acid) (PAMPS) as sulfonated segments were synthesized and blended with PVDF matrix in order to create proton transport sites in PVDF matrix. It was found that addition of PMMA‐co‐PAMPS and PAN‐co‐PAMPS copolymers resulted in a significant increase in porosity, which favored the water uptake and proton transport at ambient temperature. Furthermore, crystallinity degree of the PVDF‐based blend membranes was increased by addition of the related copolymers, which is mainly attributed to formation of hydrogen bonding interaction between PVDF matrix and the synthesized copolymers, and led to a slight decrease in proton conductivity behavior of blend membranes. From impedance data, the proton conductivity of the PVDF/PMMA‐co‐PAMPS and PVDF/PAN‐co‐PAMPS blend membranes increases to 10 and 8.4 mS cm⁻¹ by adding only 50% of the related copolymer (at 25°C), respectively. Also, the blend membranes containing 30% sulfonated copolymers showed a power density as high as 34.30 and 30.10 mW cm⁻² at peak current density of 140 and 79.45 mA cm⁻² for the PVDF/PMMA‐co‐PAMPS and PVDF/PAN‐co‐PAMPS blend membranes, respectively. A reduction in the tensile strength was observed by the addition of amphiphilic copolymer, whereas the elongation at break of all blend membranes was raised.     

Synthesis and Characterization of a Diblock Copolymer of Methyl Methacrylate and Vinyl Acetate by Successive Photo‐Induced Charge Transfer Polymerization Using Ethanolamine as the Parent Compound

Communication: A diblock copolymer consisting of poly(methyl methacrylate) (PMMA) and poly(vinyl acetate) (PVAc) with hydroxyl group at one end is prepared by successive charge transfer polymerization (CTP) under UV irradiation at room temperature using ethanolamine and benzophenone as a binary initiation system. The diblock copolymer PMMA‐b‐PVAc could be selectively hydrolyzed to the block copolymer of poly(methyl methacrylate) and poly(vinyl alcohol) (PVA) using sodium ethoxide as the catalyst. Both copolymers, PMMA‐b‐PVAc and PMMA‐b‐PVA, are characterized in detail by means of FTIR and ¹H NMR spectroscopy, and GPC. The effect of the solvent on CTP and the kinetics of CTP are discussed.     

Development and Characterization of Highly Conducting Nonfluorinated Di and Triblock Copolymers for Polymer Electrolyte Membranes

To achieve stable polymer electrolyte membranes (PEMs) with efficient ionic nano-channels, novel fully aromatic AB or ABA copolymers composed of poly(fluorenyl ether sulfone biphenyl)s (PFESBs) and poly(arylene ether sulfone)s (PAESs) were synthesized via polymerization and post-sulfonation methods, and were explored as fuel cell membranes. The structural analysis of synthesized copolymers and the corresponding membranes were ascertained by gel permeation chromatography (GPC), Fourier transform infrared (FTIR), and ¹H nuclear magnetic resonance (NMR) techniques. Thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) analysis showed that the prepared membranes were thermally stable, so that elevated temperature fuel cell operation would be possible. High hydrophilic and hydrophobic nano-phase separation and obvious ionic aggregate block morphology was observed in both triblock and diblock copolymers in atomic force microscopy (AFM) phase images, which may be highly related to their proton transport ability. A sulfonated AB diblock copolymer membrane with an ion-exchange capacity (IEC) of 2.06 meq g^?1 has a maximum proton conductivity of 184 mS cm^?1, which is higher than that of a perfluorosulfonic acid membrane under the same measurement conditions.     

Organic solvent dispersion of poly(3,4‐ethylenedioxythiophene) with the use of polymeric ionic liquid

A nonaqueous dispersion of poly(3,4‐ethylenedioxythiophene) (PEDOT) was prepared with the use of polymeric ionic liquid (PIL) as a polymerization template and phase transfer medium. A detailed investigation was performed to understand the role of PIL in the course of polymerization and phase transfer reaction. On the basis of our findings from X‐ray photoelectric spectroscopy (XPS), we propose a mechanism by which the PIL leads to the nanostructured PEDOT colloids in various organic solvents and thus facilitating smoother surface morphologies of the PEDOT‐PIL films. In addition, the enhancement of charge transport was observed for PEDOT‐PIL complex when compared with PEDOT without PIL. Raman spectroscopy indicates that there is a reduced interaction between the charge carriers on the PEDOT and the counter ions bound to PIL, thus promoting charge carrier hopping rates. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6872–6879, 2008     

Direct synthesis of amphiphilic block copolymers, consisting of poly(methyl methacrylate) and poly(sodium styrene sulfonate) blocks through atom transfer radical polymerization

Amphiphilic block copolymers of methyl methacrylate (MMA) and sodium styrene sulfonate (SSNa) were successfully synthesized via direct atom transfer radical polymerization (ATRP) of SSNa. First, poly(sodium styrene sulfonate) (PSSNa) or poly(methyl methacrylate) (PMMA) macroinitiators were prepared using proper ATRP systems for each case. In some cases, functional initiators, which allow further reactions, were used. The macroinitiators were characterized and further used to synthesize PSSNa/PMMA block copolymers, by using proper solvent combinations, such as N,N-dimethylformamide/water or methanol/water at appropriate volume ratios, in order to ensure solubility of the synthesized amphiphilic copolymers. The molecular weight of the copolymers was determined by gel permeation chromatography, using water as eluent. By using a combination of analytical techniques like ¹H NMR, FTIR and thermogravimetry, the chemical structure and the actual copolymer composition were determined. Since, the block copolymers were soluble in water, forming hydrophilic/hydrophobic domains in aqueous solution, their micellization behavior was further studied by pyrene fluorescence probing.     

Double‐Stimuli‐Responsive Spherical Polymer Brushes with a Poly(ionic liquid) Core and a Thermoresponsive Shell

The synthesis of poly(ionic liquid) (PIL) nanoparticles grafted with a poly(N‐isopropyl acrylamide) (PNIPAM) brush shell is reported, which shows responsiveness to temperature and ionic strength in an aqueous solution. The PIL nanoparticles are first prepared via aqueous dispersion polymerization of a vinyl imidazolium‐based ionic liquid monomer, which is purposely designed to bear a distal atom transfer radical polymerization (ATRP) initiating group attached to the long alkyl chain via esterification reaction. The size of the PIL nanoparticles can be readily tuned from 25 to 120 nm by polymerization at different monomer concentrations. PNIPAM brushes are successfully grafted from the surface of the poly(ionic liquid) nanoparticles via ATRP. The stimuli‐responsive behavior of the poly(ionic liquid) nanoparticles grafted with PNIPAM brushes (NP‐g‐PNIPAM) in aqueous phase is studied in detail. Enhanced colloidal stability of the NP‐g‐PNIPAM brush particles at high ionic strength compared to pure PIL nanoparticles at room temperature is achieved. Above the lower critical solution temperature (LCST) of PNIPAM, the brush particles remain stable, but a decrease in hydrodynamic radius due to the collapse of the PNIPAM brush onto the PIL nanoparticle surface is observed.

     

Preparation of Micron‐Sized Monodisperse Poly(ionic liquid) Particles

Micron‐sized monodisperse poly(ionic liquid) (PIL) particles, poly([2‐(methacryloyloxy)ethyl]trimethylammonium bis(trifluoromethanesulfonyl)amide), were prepared by dispersion polymerization at 70 °C in methanol with poly(vinylpyrrolidone) as a stabilizer. The obtained particle size could be controlled by addition of ethanol to the methanol medium while maintaining narrow monodispersity. The PIL particles exhibit unique properties; they can be observed by scanning electron microscopy without platinum coating, which is generally used to avoid an electron charge. Moreover, the solubility of the PIL particles can be easily changed by changing the counter anion, similar to the process for ionic liquids.     

Change in Physico-chemical Properties of PMMA and PS by Copolymerization with an Anionic Amphiphilic Comonomer: Sodium 11-(methacryloyloxy) undecanylsulfate (MET)

Sodium 11-(methacryloyloxy) undecanylsulfate (MET) monomer units were incorporated in polystyrene (PS) and poly(methyl methacrylate) (PMMA) by free radical copolymerization in solution with styrene and methyl methacrylate, respectively. Experimental compositions, thermal degradations, average molecular weights, glass transitions and affinities for moisture were experimentally determined for copolymers of various compositions. Both styrene and methyl methacrylate copolymerized well with MET. An increase in the moisture affinity and a change in the glass transition were observed with increasing MET content in the respective copolymers.     

Synthesis and micelle formation of triblock copolymers of poly(methyl methacrylate)-b-poly(ethylene oxide)-b-poly(methyl methacrylate) in aqueous solution

Amphiphilic triblock copolymers of poly(methyl methacrylate)-b-poly(ethylene oxide)-b-poly(methyl methacrylate) (PMMA-b-PEO-b-PMMA) with well-defined structure were synthesized via atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) initiated by the PEO macroinitiator. The macroinitiator and triblock copolymer with different PMMA and/or PEO block lengths were characterized with ¹H and ¹³C NMR and gel permeation chromatography (GPC). The micelle formed by these triblock copolymers in aqueous solutions was detected by fluorescence excitation and emission spectra of pyrene probe. The critical micelle concentration (CMC) ranged from 0.0019 to 0.016 mg/mL and increased with increasing PMMA block length, while the PEO block length had less effect on the CMC. The partition constant K_v for pyrene in the micelle and in aqueous solution was about 10⁵. The triblock copolymer appeared to form the micelles with hydrophobic PMMA core and hydrophilic PEO loop chain corona. The hydrodynamic radius R_h,app of the micelle measured with dynamic light scattering (DLS) ranged from 17.3 to 24.0 nm and increased with increasing PEO block length to form thicker corona. The spherical shape of the micelle of the triblock copolymers was observed with an atomic force microscope (AFM). Increasing hydrophobic PMMA block length effectively promoted the micelle formation in aqueous solutions, but the micelles were stable even only with short PMMA blocks.     

Preparation of single-walled carbon nanotube (SWNT) gel composites using poly(ionic liquids)

This paper reports a new and practical route for synthesizing nanotube-polymeric ionic liquids gel by non-covalent functionalization of oxidized single-walled carbon nanotube (SWNT) surfaces with imidazolium-based poly(ionic liquids) (PILs), using in situ radical polymerization method. A black and homogeneous precipitate SWNTs was obtained as a gel form, which is well dispersed in aqueous solution without any aggregation. The formation of SWNT gels is explained by the electrostatic attractions or π-bonds between the SWNT surface and the PIL matrix. By anion-exchange reaction of PIL bound to SWNTs, hydrophilic anions in PIL were substituted with hydrophobic anions, resulting in an effective transfer of SWNT-PIL hydrogels to organogels. The result also showed that SWNTs can effectively improve the conductivity along with the thermal stability of nanocomposite gels.     

New Organic Dispersions of Conducting Polymers Using Polymeric Ionic Liquids as Stabilizers

Summary: Polypyrrole (PPy), polyaniline (PANI), and poly(ethylenedioxythiophene) (PEDOT) aqueous dispersions were prepared by polymerizing the corresponding monomer in the presence of a polymeric ionic liquid (PIL), poly(1‐vinyl‐3‐ethylimidazolium bromide). By addition of bispentafluoroethanesulfonimide lithium salt, the PIL stabilizer becomes hydrophobic and precipitates in water and traps the conducting polymer microparticles inside. The dispersion of the recovered powders in organic solvents leads to organic conducting dispersions. After casting the organic dispersions, hydrophobic films with electrical conductivity values as high as 0.1 S · cm⁻¹ were obtained.

A new synthetic route to new organic dispersions.     

Preparation of Composite Polymer Particles by Seeded Dispersion Polymerization in Ionic Liquids

Summary: Submicron-sized monodisperse PS particles were prepared by dispersion polymerization of styrene in ionic liquids with poly(vinylpyrrolidone) as stabilizer. Seeded dispersion polymerization of MMA was subsequently carried out with PS seeds in [Bmim][BF₄] to prepare PS/PMMA composite particles. Observation of the obtained particles of ultrathin cross-sections with a scanning and transmission electron microscope revealed that no secondary nucleation occurred during the seeded dispersion polymerization and that the particles have a core-shell morphology consisting of a PS core and a PMMA shell. Successful preparation of PS/PMMA composite particles in an ionic liquid has thus been demonstrated. Moreover, PS/PAA (PS-core/PAA-shell) composite particles were prepared by seeded dispersion polymerization in [DEME][TFSI], illustrating that hydrophobic/hydrophilic composite particles can be readily prepared in the ionic liquid.     

混合离子液体对聚甲基丙烯酸甲酯分子链缠结及松弛行为的影响

首先通过两步法合成了具有双咪唑环阳离子结构的离子液体(DIL),并将其与单咪唑环离子液体(MIL)进行混合以调控黏度变化,混合离子液体(ILs)的黏度符合对数混合规则且随温度变化呈现Arrhenius型流体行为.进一步通过动态流变、示差扫描量热(DSC)、电化学测试等方法研究了混合离子液体中DIL比例对聚甲基丙烯酸甲酯(PMMA)链缠结和松弛行为的影响,并讨论了PMMA/ILs体系热稳定性、玻璃化转变及离子电导率等的变化.结果表明,DIL独特的双咪唑环结构可与PMMA分子形成更多相互作用位点,从而导致凝聚缠结的形成,很大程度上限制了PMMA分子链的运动和松弛.随DIL含量增加,PMMA/ILs体系的松弛时间、热分解温度、玻璃化转变温度等参数均呈增大趋势,但其离子电导率有所损失,这与DIL较大的分子尺寸和运动能力有关.     

Thermal‐initiating potentialities of poly(methyl methacrylate) peroxide: Metamorphosis of block‐into‐block copolymer and comparative studies on surface texture and morphology

This is the first report concerning the use of vinyl polyperoxide, namely, poly(methyl methacrylate) peroxide (PMMAP), as a thermal initiator for the synthesis of active polymer PMMAP‐PS‐PMMAP by free‐radical polymerization with styrene. The polymerizations have been carried out at different concentrations of macroinitiator PMMAP. The active polymers have been characterized by ¹H NMR, DSC, thermogravimetric analysis, and gel permeation chromatography. PMMAP‐PS‐PMMAP is further used as the thermal macroinitiator for the preparation of another block copolymer, PMMA‐b‐PS‐b‐PMMA, by reacting the active polymers with methyl methacrylate. The block copolymers have been synthesized by varying the concentrations of the active polymers. The mechanism of block copolymers has been discussed, which is also supported by thermochemical calculations. Studies on the surface texture and morphology of the block copolymer of polystyrene (PS) and PMMA material have been carried out using scanning electron microscopy. Furthermore, in this article, a blend of the same constituent materials (PS and PMMA) in proportions (v/v) similar to that contained in block copolymers has been formulated, and the morphology and surface textures of these materials were also investigated. A comparative microscopical evaluation between two processing methods was done for a better understanding of the processing route dependence of the microstructures. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 546–554, 2001     

Enhanced ionic conductivity in PEO/PMMA glassy miscible blends: Role of nano‐confinement of minority component chains

AC impedance spectroscopy was used to investigate the ionic conductivity of solution cast poly(ethylene oxide) (PEO)/poly(methyl methacrylate) (PMMA) blends doped with lithium perchlorate. At low PEO contents (below overlap weight fraction w^*), ionic conductivities are almost low. This could be due to nearly distant PEO chains in blend, which means ion transportation cannot be performed adequately. However, at weight fractions well above w^*, a significant increase in ionic conductivity was observed. This enhanced ionic conductivity mimics the PEO segmental relaxation in rigid PMMA matrix, which can be attributed to the accelerated motions of confined PEO chains in PMMA matrix. At PEO content higher than 20 wt % the conductivity measured at room temperature drops due to crystallization of PEO. However by increasing temperature to temperatures well above the melting point of PEO, a sudden increase of conductivity was observed which was attributed to phase transition from crystalline to amorphous state. The results indicate that some PEO/PMMA blends with well enough PEO content, which are structurally solid, can be considered as an interesting candidate for usage as solid‐state electrolytes in Lithium batteries. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 2065–2071, 2010     

The Synthesis of Special Block Copolymers Using a Reaction Calorimeter

Summary : The paper provides experimental results about an easy and versatile method to produce amphiphilic block copolymers, block copolymer particles, and even inorganic – polymeric nano-composites via aqueous heterophase polymerization. Special emphasis is placed on the morphology and colloidal properties of some non-ionic di- and triblock copolymer particles with poly(ethylene glycol) of 10⁶ g/mol molecular weight as hydrophilic block as well as di-stimuli-responsive block copolymers containing both a poly(N-isopropyl acrylamide) and a poly(ionic liquid) block.