Effect of dipping solution pH values on electrostatic layer-by-layer self-assembly of side-chain azo polyelectrolyte

The effect of pH value on the electrostatic layer-by-layer self-assembly and the photo-responsive behavior of Poly{2-[4-(4-ethoxyphenylazo)phenoxy]ethyl acrylate-co-acrylic acid} (PEAPE) was studied. Results show that in the studied pH value range, the lower the pH value is, the higher is the UV-vis absorbance and the larger is the thickness of the multilayer films. FTIR studies indicate that the azo polyelectrolyte exhibits a different ionization degree in solutions with different pH values. The higher absorbance and the larger thickness of the layer-by-layer films can be attributed to the low ionization degree and the shrinkage conformation of PEAPE in the solution with low pH values. FTIR analysis also confirms that the driving force for layer-by-layer self-assembly of PEAPE and PDAC is the electrostatic interaction. __________ Translated from Acta Polymerica Sinica, 2007, 5: 440–445 [译自: 高 分子学报]     

Nanocomposite membranes for organic solvent nanofiltration

Organic solvent nanofiltration (OSN) is a molecular separation method which offers a sustainable and reliable solution compared to the conventional energy-intensive separation processes. OSN can be successfully applied to several applications, such as food, pharmaceutical, petrochemical and fine-chemical industries. Current research on OSN membranes mainly focuses on polymeric materials due to the ease of processing, controlled formation of pores, lower fabrication costs and higher flexibility as compared with inorganic materials. However, there are some limitations for the polymeric membranes which can be partially surmounted by adding nanoscale fillers into the polymeric matrix to make nanocomposite membranes. This review aims to comprehensively evaluate and report the advances in nanocomposite membranes prepared by using either different nanoscale fillers or various fabrication methods for OSN applications. Nanoparticles that will be discussed include metal-organic framework, graphene oxide, carbon nanotubes, silica, titanium, gold, zeolite and other fillers. The incorporation of these nanoscale fillers into the polymeric membranes can positively influence the mechanical strength, chemical and thermal stability, hydrophilicity, solute selectivity and solvent permeance. This study may provide helpful insights to develop next-generation of OSN membranes for years to come.     

Electric field-enhanced assembly of polyelectrolyte composite membranes

In this paper, a novel method was developed to enhance the assembly of polyelectrolyte composite membranes by inducing an electric field during electrostatic adsorption process. The hydrolyzed polyacrylonitrile (PAN) ultrafiltration (UF) membrane was placed in between a capacitor setup. The polyethyleneimine (PEI) was compulsorily assembled on the PAN support under the action of external electric force. Subsequently, the polyelectrolyte composite membranes were evaluated by pervaporation separation of water and alcohol mixture. The membrane obtained with only one PEI layer had a separation factor of 304 and a permeate flux of 512 g/m² h (75 °C) for pervaporation of 95 wt% ethanol–water mixture. An atomic force microscopy was also used to observe the microtopographical changes. The regularity of the membranes assembled by the new method was also improved in comparison with the membrane assembled by a dynamic layer-by-layer adsorption.     

Self-assembly of inner skin hollow fiber polyelectrolyte multilayer membranes by a dynamic negative pressure layer-by-layer technique

In the past studies, electrostatic layer-by-layer (LbL) adsorption of oppositely charged polyelectrolytes has proven to be a promising method for the preparation of polyelectrolyte multilayer membranes (PEMMs). Till now, this method was mainly used to assemble flat sheet and tubular membranes. Since hollow fiber membrane has some advantages such as high-packing density, self-contained mechanical support and hence the consequent economical superiority, this study therefore seeked to assemble inner skin hollow fiber PEMMs by using a dynamic LbL adsorption technique. The assembly process was successfully accomplished by alternatively dynamically filtrating polyacrylic acid (PAA) and polyethyleneimine (PEI) on a hydrolyzed hollow fiber polyacrylonitrile (PAN) membrane under a negative pressure condition. In the case of pervaporation separation of 95 wt.% ethanol–water mixture (50 °C), the membrane obtained with only 4.5 and 6.5 bilayers had separation factor of 245 and 1338 while the permeate fluxes were 290 and 120 g/(m² h), respectively. The pervaporation separation behavior of various alcohol/water mixtures with the alcohols being t-butanol, 2-propanol and ethanol were also investigated. Finally, scanning electron microscopy and atomic force microscopy clearly confirms a uniform and defect-free layer formed on the inner surface of hollow fiber support. Since different polyelectrolyte pairs could be used to assemble PEMMs for different uses, it was expected that the dynamic negative pressure LbL adsorption technique could also potentially be used to prepare many types of PEMMs in other fields.     

Nonrandom adsorption of polyelectrolyte chains on finite regularly charged surfaces

Adsorption phenomena are relevant in a wide variety of subjects, from biophysics to technological applications. Different aspects, such as molecular recognition, multilayer deposition, and dynamics of polymer adsorption have been addressed. The methodologies used range from analytical and numerical methods to molecular dynamics or Monte Carlo simulations. In this work, a coarse‐grained model is used to explore the adsorption of charged backbones to oppositely charged regions of a surface. These regions encompass those small enough to prevent complete adsorption, but extend to surfaces sufficiently large to promote adsorption with minimal effect on the three‐dimensional conformation in bulk. Apart from the different surface areas explored, variations on the surface charge density, polyelectrolyte chain length, and chain stiffness were also considered. The degree of compaction of the polyelectrolyte, on adsorption, is different from that found in the bulk. Also, results indicate an nonuniform adsorption pattern on regularly charged surfaces. © 2013 Wiley Periodicals, Inc.     

Lactic acid recovery from cheese whey fermentation broth using combined ultrafiltration and nanofiltration membranes

The separation of lactic acid from lactose in the ultrafiltration permeate of cheese whey broth was studied using a cross-flow nanofiltration membrane unit. Experiments to test lactic acid recovery were conducted at three levels of pressure (1.4, 2.1, and 2.8 MPa), two levels of initial lactic acid concentration (18.6 and 27 g/L), and two types of nanofiltration membranes (DS-5DK and DS-5HL). Higher pressure caused significantly higher permeate flux and higher lactose and lactic acid retention (p<0.0001). Higher initial lactic acid concentrations also caused significantly higher permeate flux, but significantly lower lactose and lactic acid retention (p<0.0001). The two tested membranes demonstrated significant differences on the permeate flux and lactose and lactic acid retention. Membrane DS-5DK was found to retain 100% of lactose at an initial lactic acid concentration of 18.6 g/L for all the tested pressures, and had a retention level of 99.5% of lactose at initial lactic acid concentration of 27 g/L when the pressure reached 2.8 MPa. For all the test when lactose retention reached 99–100%, as much as 64% of the lactic acid could be recovered in the permeate.     

Preparation of polyelectrolyte multilayer membranes by dynamic layer-by-layer process for pervaporation separation of alcohol/water mixtures

In the past decades, the layer-by-layer (LBL) adsorption of oppositely charged polyelectrolytes has proven to be a promising method for the preparation of polyelectrolyte multilayer membranes. However, to obtain a good separation capability, LBL adsorption involved relatively long periods because 50–60 bilayers were normally required. The aim of this study was to develop such a new method that would allow simplification of the LBL procedure. LBL adsorption was proposed to proceed under a dynamic condition to prepare polyelectrolyte multilayer membranes. The polyacrylic acid (PAA) and polyethyleneimine (PEI) were alternatively deposited on polyethersulfone (PES) ultrafiltration support membrane under a pressure of 0.1 MPa. The polyelectrolyte multilayer membranes prepared by dynamic LBL process were compared with those prepared by the static LBL process for the pervaporation separation of water–ethanol mixture. The results suggested that a relatively high separation factor could be obtained with only four composite bilayers by using dynamic LBL process. The preparative conditions including bilayer number, filtration time of the first PAA layer, reaction time, ratio between polayanion and polycation concentrations, PAA molecular weight and salt addition were investigated. The pervaporation conditions such as feed temperature and water concentration in the feed were also evaluated. Under the temperature of 40 °C, the separation factor and the permeate flux of the polyelectrolyte multilayer membranes were about 1207 and 140 g/(m² h), respectively.     

二胺结构对聚酰胺复合纳滤膜性能的影响

分别以邻苯二胺、间苯二胺、对苯二胺为水相单体,均苯三甲酰氯(TMC)为油相单体,聚醚砜超滤膜为基膜,界面聚合法制备了复合纳滤膜.在纳滤膜对Na<,2>SO<,4>,MgSO<,4>,MgCl<,2>和NaCl四种盐的脱盐率中,间苯二胺膜最高,对苯二胺膜居中,邻苯二胺膜最差;在纳滤膜耐氯性能方面,对苯二胺最佳,邻苯二胺居...     

Effect of an acidic treatment on the chemical and charge properties of a nanofiltration membrane

In order to improve the performance of a nanofiltration membrane (DS5 DL from Osmonics^®) several pre-treatments have been tested. Specifically, the membrane has been immersed, for different times, in an aqueous solution of HF or H₃PO₄, or of a mixture of both these acids. The chemical and charge properties of the membranes, both pre-treated and untreated, have been studied.     

Interfacially polymerized thin film composite membranes on microporous polypropylene supports for solvent-resistant nanofiltration

Interfacial polymerization (IP) is a powerful technique for fabrication of thin film composite (TFC) membranes. The polymers used most often as support are polysulfone (PS) or polyethersulfone (PES). These supports have limited stability in organic solvents. In this work, microporous polypropylene (PP) flat film and hollow fiber membranes were used as a support to fabricate TFC membranes for nanofiltration by the IP technique. Porous polypropylene membranes can provide substantial chemical, pH, and solvent resistance and are therefore suitable as supports for fabricating TFC membranes functioning as solvent-stable nanofiltration membranes. The surface and the pore interior of polypropylene flat sheet and hollow fiber membranes were hydrophilized first by pre-wetting with acetone followed by oxidation with chromic acid solution. A standard procedure to successfully coat the hydrophilized flat film and hollow fiber membranes was developed next. The monomeric system chosen for IP was poly(ethyleneimine) and isophthaloyl dichloride. The TFC hollow fiber membranes were characterized by nanofiltration of safranin O (MW 351) and brilliant blue R (MW 826) dyes in methanol. Rejection values of 88% and 43% were achieved for brilliant blue R and safranin O, respectively at a transmembrane pressure of 413 kPa in the TFC hollow fiber membranes. Pressure dependences of the solvent flux and solute rejection of the TFC membranes were studied using the modified flat sheet membranes up to a pressure of 965–1241 kPa. Solvent flux increased linearly with an increase in the transmembrane pressure. Solute rejection also increased with an increase in the transmembrane pressure. All modified membranes were also characterized using scanning electron microscopy. Extended-term solvent stability of the fabricated membranes was studied in toluene; the membranes demonstrated substantial solvent stability in toluene.     

Hydrophilic nanofiltration membranes with self-polymerized and strongly-adhered polydopamine as separating layer

Inspired by the self-polymerization and strong adhesion characteristics of dopamine in aqueous conditions,a novel hydrophilic nanofiltration (NF) membrane was fabricated by simply dipping polysulfone (PSf) ultrafiltration (UF) substrate in dopamine solution.The changes in surface chemical compositio     

Zwitterionic microgel based anti(-bio)fouling smart membranes for tunable water filtration and molecular separation

Tunable gating polymeric nanostructured membrane with excellent water permeability and precise molecular separation is highly advantageous for smart nanofiltration application. Polymeric nanostructures such as microgels with functionalizable cross-linkable moieties can be an excellent choice to construct membranes with a thin separation layer, functionality, and tunable transport properties. In the present work, we prepared switchable anti(bio)fouling membranes using zwitterionically functionalized antibacterial thermoresponsive aqueous core-shell microgels with a thin separation layer for controlled filtration and separation applications. The microgels were synthesized using a one-step graft copolymerization of poly(N-isopropylacrylamide) and polyethyleneimine (PEI) followed by zwitterionization of free amine groups of PEI chains with 1,3-propane sultone. Microgel synthesis and zwitterionization were confirmed by spectroscopic and elemntal analysis. The obtained microgels were thoroughly characterized to analyze their thermoresponsive behavior, morphology, charge, and antibacterial properties. After that, characterizations were performed to elucidate the surface properties, water permeation, rejection, and flux recovery of the microgel membranes prepared by suction filtration over a track-etched support. It was observed that zwitterionic membrane provides better hydrophilicity, lower bovine serum albumin (BSA) adsorption, and desirable antimicrobial activity. The pure water permeability was directly related to the microgel layer thickness, applied pressure, and temperature of the feed solution. The novel nanostructured membrane leads to an excellent water permeance with a high gating ratio, high flux recovery rate with low irreversible fouling, better rejection for various dyes, and foulant. Most importantly, the long-term performance of the membrane is appreciable as the microgel layer remains intact and provides excellent separation up to a longer period. Owing to easy preparation and well control over thickness, the zwitterionic microgel membranes constitute unique and interactive membranes for various pressure-driven separation and purification applications.     

Complexes of polyelectrolyte hydrogels with organic dyes: Effect of charge density on the complex stability and intragel dye aggregation

The swelling behavior of polyelectrolyte gels based on poly(diallyldimethylammonium chloride) (copolymers of diallyldimethylammonium chloride and acrylamide with the variable composition) and poly(methacrylic acid, sodium salt) in the presence of organic water soluble dyes (alizarin, naphthol blue black, rhodamine) was studied. The collapse of the polyelectrolyte gels in the presence of oppositely charged dyes together with the effective absorption of dyes was observed. The shrinking degree and the dye absorption by the gel depend on the charges of the polymer network and the dye, and also on the dye concentration. Stability of the gel–dye complexes in a salt solution of NaCl and Al₂(SO₄)₃ was studied. It was shown that the complex stability in the salt solution depends on the charge density of the polymer chains forming the gel. The increase of charge density of polymer generally leads to the enhancement of the complex stability. For the systems with the fraction of charged poly(diallyldimethylammonium chloride) monomer units above 0.5 the release of alizarin to the external solution of Al₂(SO₄)₃ reservoir is practically completely suppressed. The obtained results show that oppositely charged dyes are generally from stable complexes with polyelectrolyte gels. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1209–1217, 1999     

Asymmetric TPX membranes with high gas flux

Asymmetric poly(4-methyl-1-pentene) (TPX) membranes were prepared via a two-stage wet phase inversion method to improve their gas flux. The effects of solution and coagulant on the morphology of membranes were studied from the view point of thermodynamics and diffusion kinetics. It is also found that the surface tension and solubility parameters of second-bath media play important roles in determining the membrane morphology and the gas separation performance. In addition, the effect of milling temperature and the decline of gas flux with storage time are discussed.     

Water purification by membranes: The role of polymer science

Two of the greatest challenges facing the 21st century involve providing sustainable supplies of clean water and energy, two highly interrelated resources, at affordable costs. Membrane technology is expected to continue to dominate the water purification technologies owing to its energy efficiency. However, there is a need for improved membranes that have higher flux, are more selective, are less prone to various types of fouling, and are more resistant to the chemical environment, especially chlorine, of these processes. This article summarizes the nature of the global water problem and reviews the state of the art of membrane technology. Existing deficiencies of current membranes and the opportunities to resolve them with innovative polymer chemistry and physics are identified. Extensive background is provided to help the reader understand the fundamental issues involved. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2010     

Dynamic interactive membranes with pressure-driven tunable porosity and self-healing ability

When pressure is applied to dynamic interactive membranes consisting of micelles composed of a triblock copolymer, their morphologies can be fine-tuned. Membranes with a range of porosities are accessible which can regulate and thereby control filtration performance and also display effective autonomous healing.     

Recent advances in the use of the quartz crystal microbalance with dissipation for the study of the collapse of polyelectrolyte brushes

The combination of Quartz Crystal Microbalance and ellipsometry to quantify polyelectrolyte brush hydration and how this impacts on the study of brush collapse is discussed here. Recent articles study collapse after quantifying hydration of poly (2-methacryloyloxy ethyl trimethyl ammonium chloride) (PMETAC) and poly(potassium sulfo propyl methacrylate). Water lost increases with ionic strength but only a 50% of their water content is lost at 1 M NaCl. For PMETAC brushes the exchange of Cl⁻ by ClO₄⁻ is more effective, causing 50% lost at 0.05 M. The hydration and water lost for PMETAC brushes synthesized from thiol monolayers with variable density of initiators from 1 to 100% show that the freely entrapped water of the brushes is around a 10%. Irrespectively of initiator percentage the brush does not lose at 1 M NaCl more than 50% of the original water content. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013, 51, 1068–1072     

Zeta potential and surface charge density of polystyrene-latex; comparison with synaptic vesicle and brush border membrane vesicle

The electrophoretic mobility of polystyrene — latex (PSL) of diameter 870 Å was determined using a Laser Zee System 3000. This instrument enables automatic measurement of the electrophoretic mobility of fine particles. Effect of pH and ionic strengthI on the PSL mobility was analyzed. It was found that the mobility as a function of pH has a minimum around pH 3–4 atI=0.1, showing no isoelectric point, and that the mobility decreases with increasing ionic strength up toI=0.1 but is almost constant forI=0.1–0.2 at pH=7.34. From the mobility date, we estimated the zeta potential of PSL. We used an approximate mobility formula derived by Ohshima, Healy and White, which is considerably more accurate than Smolchowski's and Henry's formula and is applicable for fine particles with small a ( a10), where is the Debye-Hückel parameter anda is the particle radius. Further, we calculated the surface charge density of PSL using an approximate relationship. It was found that there are 2000–4000 negative charges on the PSL surface at pH=7.34. Comparison is made with the results on synaptic vesicles (SV) from brain cerebrum cortex and brush-border-membrane vesicles (BBMV) from the small intestine.