Aggregation-induced emission luminogens and tunable multicolor polymer networks modulated by dynamic covalent chemistry

Aggregation-induced emission(AIE) based luminescent materials are generating intensive interest due to their unique fluorescence in the aggregation state. Herein we report a strategy of dynamic covalent chemistry(DCC) controlled AIE luminogens for the regulation of multicolor emission in reversible covalent polymer networks. Tetraphenylethene derived ring-chain tautomers were prepared, and the emission was readily controlled through multimode, such as changing the solvent, adding the base, and d...     

Insights into the Correlation of Cross-linking Modes with Mechanical Properties for Dynamic Polymeric Networks

Simultaneously introducing covalent and supramolecular cross-links into one system to construct dually cross-linked networks, has been proved an effective approach to prepare high-performance materials. However, so far, features and advantages of dually cross-linked networks compared with those possessing individual covalent or supramolecular cross-linking points are rarely investigated. Herein, on the basis of comparison between supramolecular polymer network (SPN), covalent polymer network (CPN) and dually cross-linked polymer network (DPN), we reveal that the dual cross-linking strategy can endow the DPN with integrated advantages of CPN and SPN. Benefiting from the energy dissipative ability along with the dissociation of host–guest complexes, the DPN shows excellent toughness and ductility similar to the SPN. Meanwhile, the elasticity of covalent cross-links in the DPN could rise the structural stability to a level comparable to the CPN, exhibiting quick deformation recovery capacity. Moreover, the DPN has the strongest breaking stress and puncture resistance among the three, proving the unique property advantages of dual cross-linking method. These findings gained from our study further deepen the understanding of dynamic polymeric networks and facilitate the preparation of high-performance elastomeric materials.     

Thermally Responsive Selenide-containing Materials Based on Transalkylation of Selenonium Salts

Covalent adaptable networks (CANs) possess unique properties as a result of their internal dynamic bonds, such as self-healing and reprocessing abilities. In this study, we report a thermally responsive C−Se dynamic covalent chemistry (DCC) that relies on the transalkylation exchange between selenonium salts and selenides, which undergo a fast transalkylation reaction in the absence of any catalyst. Additionally, we demonstrate the presence of a dissociative mechanism in the absence of selenide groups. After incorporation of this DCC into selenide-containing polymer materials, it was observed that the cross-linked networks display varying dynamic exchange rates when using different alkylation reagents, suggesting that the reprocessing capacity of selenide-containing materials can be regulated. Also, by incorporating selenonium salts into polymer materials, we observed that the materials exhibited good healing ability at elevated temperatures as well as excellent solvent resistance at ambient temperature. This novel dynamic covalent chemistry thus provides a straightforward method for the healing and reprocessing of selenide-containing materials.     

热适性形状记忆聚合物

动态共价交联聚合物的研究具有悠久的历史,其早期的工作着眼于如何解决应力松弛带来的聚合物材料力学性能降低的问题.20世纪90年代以来,利用动态共价键来主动设计聚合物网络的特殊可适性逐渐成为研究主流,其中包括自修复和重加工性.然而,受到动态共价键的种类、通用性及所实现功能的特异性等限制,对于动态共价交联聚合物网络的研究尚停留在基础阶段.本文以本课题组近期在动态共价交联形状记忆聚合物的研究为基础,结合其他相关工作,展示了通用共价键(酯键及氨酯键)的动态可逆性,并利用其设计了具有特殊性能和潜在商业化价值的形状记忆聚合物.在此基础上,我们提出分子结构设计及宏观性能均不同于传统热塑性和热固性形状记忆聚合物的第3类形状记忆聚合物,即热适性形状记忆聚合物.     

Main-chain supramolecular block copolymers

Block copolymers are key building blocks for a variety of applications ranging from electronic devices to drug delivery. The material properties of block copolymers can be tuned and potentially improved by introducing noncovalent interactions in place of covalent linkages between polymeric blocks resulting in the formation of supramolecular block copolymers. Such materials combine the microphase separation behavior inherent to block copolymers with the responsiveness of supramolecular materials thereby affording dynamic and reversible materials. This tutorial review covers recent advances in main-chain supramolecular block copolymers and describes the design principles, synthetic approaches, advantages, and potential applications.     

Side-chain engineering of supramonomers enables tailorable cross-linked supramolecular polyureas

The integration of tailorable mechanical properties, dimensional stability, and reprocessability is of significance in the design of sustainable polymer materials. Herein, side-chain engineering is employed to fabricate cross-linked supramolecular polymers with customizable mechanical properties. Three kinds of side chains, including methyl, 1-ethyl pentyl, and 1-hexyl nonyl, are used to modify the supramonomers. Through the copolymerization of low-content supramonomers and covalent monomers, cross-linked supramolecular polyureas with a wide range of mechanical properties spanning from rigid plastics to elastic materials are successfully constructed. Specifically, the Young's modulus can be adjusted from 525 to 128 MPa by tuning the side chain of supramonomers from methyl to 1-hexyl nonyl. Meanwhile, the materials still retain exceptional recyclability and solvent resistance. Even after seven generations of recycling processes, the reprocessed cross-linked supramolecular polyureas maintain over 95% of their original mechanical properties. It is anticipated that side-chain engineering is a facile method for designing customized polymer materials to achieve both tailored mechanical properties and desirable functions.     

Functional polymers: scanning force microscopy insights

Scanning force microscopy (SFM) and related techniques make it possible to visualize polymer systems with a molecular resolution. Beyond imaging, they also enable the unveiling of a variety of (dynamic) physico-chemical properties of both isolated polymer chains and their supramolecular architectures, including structural, mechanical and electronic properties. This article reviews recent progress in the use of SFM on polymers, with a particular emphasis on the mechanical properties of copolymers and single polymer chains, as well as on the bottom-up fabrication of supramolecular polymeric (helical) nanostructures in particular based upon pi-conjugated macromolecules as building blocks for nanoelectronics. Through a detailed understanding of the polymer behavior, we propose solutions for the generation of organic functional (nano)systems.     

Robust and recoverable dual cross-linking networks in pressure-sensitive adhesives

Pressure-sensitive adhesives (PSAs) demand the ability to simultaneously improve toughness and adhesion. However, these requirements of PSAs have remained a great challenge because robust and recoverable characteristics are usually contradictory properties of PSAs. Dual cross-linking networks developed by incorporating dynamic noncovalent bonds into chemical cross-linking networks have the potential to mitigate these requirements in a wide variety of applications including adhesives, hydrogels, and elastomers. Herein, a facile approach to achieve dual cross-linking networks of acrylic PSAs with excellent mechanical properties and high-adhesive performance that integrate physically cross-linked networks into chemically cross-linked networks is proposed. Diurethane acrylic monomer-pentaerythritol ethoxylate (DAM-PEEL) groups were introduced into the acrylic PSA system through photopolymerization. The PSA/DAM-PEEL dual cross-linking networks led to the development of the chemically cross-linked networks for both PSA and DAM via covalent bonds and the physically cross-linked networks between the amide groups of DAM and the hydroxyl groups of PEEL via hydrogen bonds. Consequently, the PSA/DAM-PEEL dual cross-linking networks were able to simultaneously improve the modulus and stretchability. This design strategy for developing dual cross-linking networks of materials could offer potential applications for various adhesive-related applications.     

A Crown-Ether-Based Elastomer Bearing Loop Structures with Dissipating Characteristics and Enhanced Mechanical Performance

Loops are prevalent topological structures in cross-linked polymer networks, resulting from the folding of polymer chains back onto themselves. Traditionally, they have been considered as defects that compromise the mechanical properties of the network, leading to extensive efforts in synthesis to prevent their formation. In this study, we introduce the inclusion of cyclic dibenzo-24-crown-8 (DB24C8) moieties within the polymer network strands to form CCNs, and surprisingly, these loops enhance the mechanical performances of the network, leading to tough elastomers. The toughening effect can be attributed to the unique cyclic structure of DB24C8. The relatively small size and the presence of rigid phenyl rings provide the loops with relatively stable conformations, allowing for substantial energy dissipation upon the application of force. Furthermore, the DB24C8 rings possess a broad range of potential conformations, imparting the materials with exceptional elasticity. The synergistic combination of these two features effectively toughens the materials, resulting in a remarkable 66-fold increase in toughness compared to the control sample of covalent networks. Moreover, the mechanical properties, particularly the recovery performance of the network, can be effectively tuned by introducing guests to bind with DB24C8, such as potassium ions and secondary ammonium salts.     

Supramolecular polymeric hydrogels

The supramolecular crosslinking of polymer chains in water by specific, directional and dynamic non-covalent interactions has led to the development of novel supramolecular polymeric hydrogels. These aqueous polymeric networks constitute an interesting class of soft materials exhibiting attractive properties such as stimuli-responsiveness and self-healing arising from their dynamic behaviour and that are crucial for a wide variety of emerging applications. We present here a critical review summarising the formation of dynamic polymeric networks through specific non-covalent interactions, with a particular emphasis on those systems based on host-guest complex formation, as well as the characterisation of their physical characteristics. Aqueous supramolecular chemistry has unlocked a versatile toolbox for the design and fine-tuning of the material properties of these hydrogels (264 references).     

Self-assembled π-conjugated macromolecular architectures — A soft solution process based on Schiff base coupling

Two-dimensional supramolecular covalent macromolecular architectures were visualized directly by in-situ scanning tunneling microcopy and colorful π-conjugated nanofilms with unique mesostructures formed spontaneously on hydrophobic substrates from aqueous solutions in the presence of simple aromatic building block molecules under ambient conditions. We thus report the results of surface-mediated polycondensation and chemical liquid deposition. The Schiff base coupling reaction applied for this soft solution process is a dynamic reversible covalent coupling reaction that can be managed by careful changes in solution conditions based on ‘adsorption’ and ‘polymerization’ equilibria. This low-cost and eco-friendly ‘bottom-up’ method allows great diversity in terms of the design of primary polymeric chemical structures by the selection of building blocks without the need to consider the solubility of the polymer. This paves the way to a true ‘bottom-up’ assembly of a vast array of solid-supported, designer supramolecular nanoarchitectures with potential use as functional materials for next-generation organic electronics.     

Covalent Organic Frameworks and Cage Compounds: Design and Applications of Polymeric and Discrete Organic Scaffolds

Porous organic materials are an emerging class of functional nanostructures with unprecedented properties. Dynamic covalent assembly of small organic building blocks under thermodynamic control is utilized for the intriguingly simple formation of complex molecular architectures in one‐pot procedures. In this Review, we aim to analyze the basic design principles that govern the formation of either covalent organic frameworks as crystalline porous polymers or covalent organic cage compounds as shape‐persistent molecular objects. Common synthetic procedures and characterization techniques will be discussed as well as more advanced strategies such as postsynthetic modification or self‐sorting. When appropriate, comparisons are drawn between polymeric frameworks and discrete organic cages in terms of their underlying properties. Furthermore, we highlight the potential of these materials for applications ranging from gas storage to catalysis and organic electronics.     

Rheology of asphalts modified with glycidylmethacrylate functionalized polymers

Asphalt is known to be a colloidal suspension in which asphaltenes are covered by a stabilizing phase of polar resins and form complex micelles that are dispersed in the oily maltenic phase. In order to enhance its mechanical properties (e.g., in road paving), asphalts are often loaded with polymeric materials, thereby obtaining blends that can have different physical or chemical structures, depending on the composition of the added polymer. Asphalts modified by the addition of reactive ethylene terpolymers were prepared and their dielectric and rheological properties were measured both before and after a cure at high temperature. Even if it is not possible to determine the exact nature of the chemical interactions between asphalt and polymer, master curves obtained from dynamic data clearly show that during the cure the material tends to the behavior of a cross-linked network.     

Theoretical Modeling of the Metal-Organic Precursors of Anthracene-Based Covalent Networks on Surfaces

Surface-assisted fabrication of molecular network architectures has been a promising route to low-dimensional materials with unique physicochemical properties and functionalities. One versatile way in this field is the Ullmann coupling reaction of halogenated organic monomers on catalytically active metallic surfaces. In this work, using the coarse-grained Monte Carlo simulations, we studied the on-surface self-assembly of metal-organic precursors preceding the covalent Ullman-type linkage of tetrahalogenated anthracene building blocks. To that end, a series of positional isomers was examined and classified with respect to their ability of creation of extended network structures. Our simulations focused on the identification of basic types of self-assembly scenarios distinguishing enantiopure and racemic systems and producing periodic and aperiodic networks. The calculations carried out for selected tectons demonstrated wide possibilities of controlling porosity (e. g. pore size, shape, periodicity, chirality, heterogeneity) of the networks by suitable functionalization of the monomeric unit. The findings reported herein can be helpful in rational designing of 2D polymeric networks with predefined structures and properties.     

Advanced Polymer Designs for Direct-Ink-Write 3D Printing

The rapid development of additive manufacturing techniques, also known as three-dimensional (3D) printing, is driving innovations in polymer chemistry, materials science, and engineering. Among current 3D printing techniques, direct ink writing (DIW) employs viscoelastic materials as inks, which are capable of constructing sophisticated 3D architectures at ambient conditions. In this perspective, polymer designs that meet the rheological requirements for direct ink writing are outlined and successful examples are summarized, which include the development of polymer micelles, co-assembled hydrogels, supramolecularly cross-linked systems, polymer liquids with microcrystalline domains, and hydrogels with dynamic covalent cross-links. Furthermore, advanced polymer designs that reinforce the mechanical properties of these 3D printing materials, as well as the integration of functional moieties to these materials are discussed to inspire new polymer designs for direct ink writing and broadly 3D printing.     

Synergistic Covalent and Supramolecular Polymers for Mechanically Robust but Dynamic Materials

Nature has engineered delicate synergistic covalent and supramolecular polymers (CSPs) to achieve advanced life functions, such as the thin filaments that assist in muscle contraction. Constructing artificial synergistic CSP materials with bioinspired mechanically adaptive features, however, represents a challenging goal. Here, we report an artificial CSP system to illustrate the integration of a covalent polymer (CP) and a supramolecular polymer (SP) in a synergistic fashion, along with the emergence of notable mechanical and dynamic properties which are unattainable when the two polymers are formed individually. The synergistic effect relies on the peculiar network structures of the SP and CPs, which endow the resultant CSPs with overall improved mechanical performance in terms of the stiffness, strength, stretchability, toughness, and elastic recovery. Moreover, the dynamic properties of the SP, including self‐healing, stimuli‐responsiveness, and reprocessing, are also retained in the CSPs, thus leading to their application as programmable and tunable materials.     

Theoretical Modeling of Mechanical Resistance and Stability and Related Characteristics of Polymeric Systems with Branching/Cross-Linking

A theoretical (thermodynamic) method for the estimation of mechanical characteristics of polymeric systems is proposed. This method uses the statistical polymer method for modeling of branched/cross-linked structures. The weak interaction between macromolecules is modeled in the approach of their mutual interpenetration. The proposed method is used for the estimation of mechanical resistance and stability of microporous polymeric materials. An engineer method for the evaluation of mechanical stability and resistance of polymeric materials is derived.     

The Mechanical Strength of a Mechanical Bond: Sonochemical Polymer Mechanochemistry of Poly(catenane) Copolymers

Topological molecular connections and structures, including physical entanglements in polymer networks, knots along polymer chains, and rotaxanes in sliding ring gels, have important consequences for the physical properties of polymeric materials. Often these topologies contribute through their ability to bear mechanical stress, but experimental measures of their relative mechanical strength are rare. Here, we use sonochemical polymer mechanochemistry to assess the relative mechanical strength of a multicatenane copolymer relative to copolymers of cyclic and linear analogs. The relative mechanical strengths are obtained by comparing the limiting molecular weights (M_lim) and contour lengths (L_lim) of the polymers under pulsed ultrasound of their dilute solutions. The values of M_lim and L_lim, and thus the inferred mechanical strengths of the polymers, are effectively identical. The mechanical bonds of the catenanes are therefore as strong, or stronger, mechanically as the covalent bonds along the polymer backbone.     

Synthesis and characterization of shell-cross-linked polymer networks and large-core star polymers: Effect of the volume of the cross-linking mixture

Group transfer polymerization and sequential addition of monomer and cross-linker were employed for the preparation of two new polymer structures, one of a polymer network and the other of a star polymer. The synthesis was completed in two steps, involving the synthesis of linear methyl methacrylate (MMA) arms of degree of polymerization of 20, followed by their cross-linking using a mixture of MMA monomer and ethylene glycol dimethacrylate (EGDMA) cross-linker. In this study, the volume of the cross-linking mixture was varied systematically. Furthermore, two mixture compositions were employed, involving MMA:EGDMA molar ratios of 1:1 and 3:1, leading to two series of polymeric materials. It was found that at a given cross-linking mixture composition, a larger volume of the cross-linking mixture favored the formation of polymer networks, whereas a smaller volume favored the formation of star polymers. The linear precursors, the star polymers and the extractables from the polymer networks were characterized by gel permeation chromatography in tetrahydrofuran (THF). The absolute weight-average molecular weight, the number of arms and the hydrodynamic radii of the star polymers, as determined using static and dynamic light scattering in THF, respectively, and their average radii as determined by atomic force microscopy, increased as the volume of the cross-linking mixture increased. The gravimetrically measured degrees of swelling in THF, the network sol fraction and the percentage of branched polymer in the sol fraction decreased as the volume of the cross-linking mixture increased.     

Visualized bond scission in mechanically activated polymers

Visualization and quantitative evaluation of covalent bond scission in polymeric materials are critical in understanding their failure mechanisms and improving the toughness and reliability of the materials.Mechano-responsive polymers with the ability of molecular-level transduction of force into chromism and luminescence have evoked major interest and experienced significant progress.In the current review,we highlight the recent achievements in covalent mechanochromic and mechanoluminescent polymers,leading to a bridge between macroscopic mechanical properties and microscopic bond scission events.After a general introduction concerning polymer mechanochemistry,various examples that illustrate the strategies of design and incorporation of functional and weak covalent bonds in polymers were presented,the mechanisms underlying the optical phenomenon were introduced and their potential applications as stress sensors were discussed.This review concludes with a comment on the opportunities and challenges of the field.