Comparison of electrochemical properties of two-component C60-Pd polymers formed under electrochemical conditions and by chemical synthesis

The electrochemical behavior of C₆₀-Pd polymer formed under electrochemical conditions and by the chemical synthesis was examined. In these polymers, fullerene moieties are covalently bonded to palladium atoms to form a polymeric network. Both materials deposited at the electrode surface show electrochemical activity at negative potentials due to the reduction of fullerene cage. Electrochemically formed thin polymeric films exhibit much more reversible voltammetric response in comparison to chemically synthesized polymers. The morphology and electrochemical behavior of chemically synthesized C₆₀-Pd polymer depend on the composition of grown solution. Chemical polymerization results in formation of large, ca. 50 μm, crystallic superficial structures that are composed of regular spherical particles with a diameter of 150 nm. The capacitance properties of C₆₀-Pd films were investigated by cyclic voltammetry and faradaic impedance spectroscopy. Specific capacitance of chemically formed films depends on the conditions of film formation. The best capacitance properties was obtained for films containing 1:3 fullerene to Pd molar ratio. For these films, specific capacitance of 35 Fg^?1 was obtained in acetonitrile containing (n-C₄H₉)₄NClO₄. This value is much lower in comparison to the specific capacitance of electrochemically formed C₆₀-Pd film.     

Novel Azobenzene-Functionalized Polyelectrolytes of Different Substituted Head Groups 3: Control of Properties of Self-Assembled Multilayer Thin Films

Novel azobenzene polyelectrolytes have been used to fabricate biocompatible self-assembled multilayer (SAMU) thin films of variable absorbance, thickness, organization, and morphology. The prepared SAMU films are useful for directed cell growth, and this application relies directly on control of contact and surface energy, and requires the ability to tune the surface characteristics which are critical to their development. The azo polyelectrolytes employed here were similar in their degree of polymerization and repeat unit composition of acrylic acid monomer and azo monomers, and only differ from each other due to the presence of different substituted head R-groups present on the p-position of the aromatic ring of the azo chromophores. Possession of characteristics of both the self-assembly due to acrylic acid groups, and photoswitchability of the azo monomer enable the azobenzene functionalized polyelectrolytes to exhibit novel photo-reversible applications. The azo polyelectrolytes with the substituted R-group pairs of shorter-ionized hydrophilic COOH and SO₃H, shorter-non-ionized hydrophobic H and OC₂H₅, and larger-nonionized hydrophobic octyl C₈H₁₇ and C₈F₁₇ were used as polyanions and counter charge PDAC used as polycation to fabricate the layer-by-layer SAMU films onto glass and silicon substrates. The fabricated SAMU films were also characterized by various techniques. The UV absorption maxima, λ_max p of the SAMU films move to lower wavelength relative to solution to exhibit a blue shift for the hydrophobic R-groups, while this behaviour was not observed for the hydrophilic R-groups. Similarly, the thickness, organization, morphology and other properties of the thin films were found to be dependent on the type of substituted R-groups of the azo polyelectrolytes due to the inter-related factors of ionization, hydrophobicity/hydrophilicity, solubility, and aggregation of azo PEL in the dipping solutions used for fabrication of the SAMU films. Understanding and controlling the adsorption characteristics of azo multilayer thin–film of switchable functionalities are vital to explore their potential for the development and application of new devices in diverse areas of biosensor, drug delivery systems, on-chip microscale chemical process and microfluidics systems.     

Electrochemically formed fullerene-based polymeric films

The recent results of investigations involving the electrochemical formation of polymers containing fullerenes and studies of their properties and applications are critically reviewed. From a structural point of view, these polymers can be divided into four main categories including (1) polymers with fullerenes physically incorporated into the foreign polymeric network without forming covalent bonds, (2) fullerene homopolymers formed via [2+2] cycloaddition, (3) “pearl necklace” polymers with fullerenes mutually linked covalently to form polymer chains, and (4) “charm bracelet” polymers containing pendant fullerene substituents. The methods of electrochemical polymerization of these systems are described and assessed. The structural features and properties of the electrochemically prepared polymers and their chemically synthesized analogs are compared. Polymer films containing fullerenes are electroactive in the negative potential range due to electroreduction of the fullerene moieties. Related films made with fullerenes derivatized with electron-donating moieties as building blocks are electroactive in both the negative and positive potential range. These can be regarded as “double cables” as they exhibit both p- and n-doping properties. Fullerene-based polymers may find numerous applications. For instance, they can be used as charge-storage and energy-converting materials for batteries and photoactive units of photovoltaic cell devices, respectively. They can be also used as substrates for electrochemical sensors and biosensors. Films of the C₆₀/Pt and C₆₀/Pd polymers containing metallic nano-particles of platinum and palladium, respectively, effectively catalyze the hydrogenation of olefins and acetylenes. Laser ablation of electrochemically formed C₆₀/M and C₇₀/M polymer films (M=Pt or Ir) results in fragmentation of the fullerenes leading to the formation of hetero-fullerenes, such as [C₅₉M]⁺ and [C₆₉M]⁺.Dedicated to Professor Dr. Alan M. Bond on the occasion of his 60th birthday.     

Stability studies of an electrochemically formed [C60]fullerene-palladium two-component film

The stability of C₆₀ and palladium two-component films, C₆₀/Pd, has been investigated. The effect of different polymerization conditions on the electrochemical stability of the film upon prolonged potential cycling has been studied. Stable voltammetric behavior was observed for polymers formed at potentials less negative than the potential of third C₆₀ reduction step. The incorporation of palladium particles into the structure of C₆₀/Pd polymers increases the polymer stability. The C₆₀/Pd films are doped with supporting electrolyte cations during reduction. The size of these cations is a crucial factor in determining the stability of the film. A strong solvent effect on the potential stability of the film was also observed. The wildest range of stable voltammetric properties was found for acetonitrile and N,N-dimethylformamide. No effect of the temperature on the film stability was observed. The results reported in this work allow for the determination of the optimal conditions for the formation of stable C₆₀/Pd films.     

Novel Azobenzene-Functionalized Polyelectrolytes of Different Substituted Head Groups 2: Control of Surface Wetting in Self-Assembled Multilayer Films

A novel set of light-responsive polyelectrolytes has been developed and studied, to control and tune surface wettability by introducing various types of substituted R head-groups of azo polyelectrolytes in self-assembled multilayer (SAMU) films. As part of a larger project to develop polymer surfaces where one can exert precise control over properties important to proteins and cells in contact, photo-reversibly, we describe here how one can tune quite reliably the contact angle of a biocompatible SAMU, containing a photo-reversible azo chromophore for eventual directed cell growth. The azo polyelectrolytes described here have different substituted R head-group pairs of shorter-ionized hydrophilic COOH and SO₃H, shorter non-ionized hydrophobic H and OC₂H₅, and larger non-ionized hydrophobic octyl C₈H₁₇ and C₈F₁₇, and were employed as polyanions to fabricate the SAMU onto silicon substrates by using the counter-charge polycation PDAC. The prepared SAMU films were primarily characterized by measurement of their contact angles with water. The surface wetting properties of the thin films were found to be dependent on the type of substituted R-groups of the azo polyelectrolytes through their degree of ionization, size, hydrophobicity/hydrophilicity, solubility, conformation, and inter-polymeric association and intra-polymeric aggregation. All these factors appeared to be inter-related, and influenced variations in hydrophobic/hydrophilic character to different extents of aggregates/non-aggregates in solution because of solvation effects of the azo polyanions, and were thus manifested when adsorbed as thin films via the SAMU deposition process. For example, one interesting observation is significantly higher contact angles of 79° for SAMU films of larger octyl R groups of PAPEA-C₈F₁₇ and PAPEA-C₈H₁₇ than for others with contact angles of 64° observed for non-polar R-groups of OC₂H₅ and H. Furthermore, lower contact angle values of 59° for SAMU films with polar R-groups of COOH and SO₃H relative to that of non-polar R-groups are in accordance with their expected order of the hydrophilicity or hydrophobicity. It is possible that the large octyl groups are more effective in shielding the ionic functional groups on the substrate surface, and contributed less to the water drop-molecule interactions with ionic groups of the PDAC and/or AA groups. In addition, higher hydrophobicity of the SAMU films may be due to the incorporation of bulky and hydrophobic groups in these polyelectrolytes, which can produce aggregates on the surfaces of the SAMU films. Through understanding and controlling the complex aggregation behavior of the different substituted R-groups of these azo polyelectrolytes, and hence their adsorption on substrates, it appears possible to finely tune the surface energy of these biocompatible films over a wide range, enhance the photo-switching capabilities of the SAMU films, and tailor other surface properties for the development and application of new devices in diverse areas of microfluidics, specialty coatings, sensors, and biomedical sciences.     

Electrochemical formation and properties of two-component films of transition metal complexes and C60 or C70

The electrochemically active polymers have been formed during electro-reduction carried out in solution containing fullerenes, C₆₀ or C₇₀, and transition metal complexes of Pd(II), Pt(II), Rh(III), and Ir(I). In these films, fullerene moieties are covalently bounded to transition metal atoms (Pd and Pt) or their complexes (Rh and Ir) to form a polymeric network. All films exhibit electrochemical activity at negative potentials due to the fullerene cages reduction process. For all studied metal complexes, yields of formation of films containing C₇₀ are higher than yields of electrodeposition of their C₆₀ analogs. C₇₀ /M films also exhibit higher porosity in comparison to C₆₀/M layers. The differences in film morphology and efficiency of polymer formation are responsible for differences in electrochemical responses of these films in acetonitrile containing supporting electrolyte only. C₇₀/M films shows more reversible voltammeric behavior in negative potential range. They also show higher potential range of electrochemical stability. Processes of film formation and electrochemical properties of polymers depend on the transition metal ions or atoms bonding fullerene cages into polymeric network. The highest efficiency of polymerization was observed for fullerene/Pd and fullerene/Rh films. In the case of fullerene/Pd films, the charge transfer processes related to the fullerene moieties reduction in negative potential range exhibit the best reversibility among all of the studied systems. Capacitance performances of C₆₀/Pd and C₇₀/Pd films deposited on the porous Au/quartz electrode were also compared. Capacitance properties of both films are significantly affected by the conditions of electropolymerization. Only a fraction of the film having a direct contact with solution contributes to pseudocapacitance. Capacitance properties of these films also depend on the size of cations of supporting electrolyte. The C₇₀/Pd film exhibits much better capacitance performance comparison to C₆₀/Pd polymer.     

Photoconductivity in Mesostructured Thin Films

Mesostructured silica films are widely studied due to their different structures, properties and variety of possible applications. Sodium dodecyl sulfate (SDS)-templated sol-gel silica films possess highly ordered lamellar phase structure. It is expected that molecules and polymer chains line up with these layered structures when incorporated into the films. Mesostructured thin films were doped with Dispersed Red 1 (DR1) and carbazole ((C₆H₄)₂NH)). The films were poled by corona discharge at 120 C. Absorption spectra were recorded as function of the polarization time. Dependence of the absorption coefficient with polarization time was fitted with a Langevin-Debye equation. It shows a saturation level after 60 minutes of polarization. We compare the efficiency of mesostructured thin films with that of amorphous films. The photoconductivity technique was used to determine the charge transport mechanism of these films. From current density versus electrostatic applied field, the parameters for the photovoltaic effect and photoconductivity were determined. Results of the mesostructured thin films are also compared to those of KNbO₃ crystals.     

Novel Azobenzene-Functionalized Polyelectrolytes of Different Substituted Head Groups 1: Synthesis,Characterization and Absorption Spectroscopy Studies

A new class of a series of amphiphilic polyelectrolytes functionalized with azobenzene chromophores have been synthesized and thoroughly characterized by various techniques. A facile two stage strategy is developed, and first involved the preparation of a precursor base polymer, designated as P(APEA), by the free-radical copolymerization of the monomers of acrylic acid (AA) and 2-(phenylethylamino)ethyl acrylate (PEA). In the second step, precursor PAPEA polymers are reacted and post-polymer modified with the diazonium salts to synthesize azobenzene polyelectrolyte, PAPEA-R with different substituted R-groups present on the para position of the aromatic ring of the azo chromophores. The PAPEA-R polyelectrolytes are same in their degree of polymerization and repeat unit compositions of AA and PEA monomers, and only differ from each other by the type of R-groups. The copolymers were classified on the basis of the characteristics of their R-groups into the hydrophilic-ionizeable smaller pair of ─SO₃H and ─COOH, the hydrophobic-non-ionizeable smaller pair of ─ H and ─OC₂H₅, and the hydrophobic-non-ionizeable larger octyl pair of ─C₈H₁₇ and ─ C₈F₁₇. The prepared copolymers are also characterized by NMR spectroscopy for structure, GPC for molecular weight, and UV-Visible spectroscopy for absorption determination. In DMF solvent, approximately similar absorption maxima, (λ_max) values were observed for azo chromophore-containing monomers and after incorporating these into their corresponding polymers structures. However, for the self-assembled multilayer thin films, λ_max moved to lower wavelengths to exhibit a blue shift with hydrophobic R-group of ─C₈H₁₇, while this behaviour was not observed for hydrophilic R-group of ─COOH. The shift in λ_max is found to be highly dependent on the type of substituted R-group, and attributed to aggregation of hydrophobic azo chromophores in DMF:H₂O mixture employed for self-assembly. The presence of the ionizeable AA and light-sensitive azo-chromophore functionalized PEA monomers in the PAPEA-R polyelectrolytes impart self-assembling and photoswitchable characteristics, respectively. Through understanding and controlling the solubility and complex solution aggregation behaviour of the different substituted R-groups of azo PEL, their adsorption, thickness, morphology, wetting, molecular-control, and photoresponsiveness can be tailored to enhance the capabilities of the self-assembled multilayer film process in diversified areas of microfluidics, sensing, and controlled release.     

Marriage of Heterobuckybowls with Triptycene: Molecular Waterwheels for Separating C60 and C70

Exploration of π-conjugated polycycles, particularly those have π-frameworks spread over the three-dimensional space, is essential in materials science and synthetic chemistry as these chemical entities possess featured optoelectronic properties and supramolecular assembly. Herein, the bowl-shaped trichalcogenasumanenes are fused onto three branches of triptycene through pyrazine units, affording waterwheel-like three-dimensional polycycles 4 a/4 b . Because the three branches on 4 a/4 b are chemically equal, the molecular orbitals of 4 a/4 b show degenerate feature that results in the strong UV-Vis absorbance at steady state. 4 a/4 b exhibit photo-induced charge-separation and subsequent charge-redistribution at transient state, leading to excited state absorption in NIR-II window (1165–1400 nm). 4 a/4 b are excellent fullerene receptors, and they form 1 : 1 host-guest complexes with C₆₀/C₇₀ as proved by spectroscopic titrations and single crystal structure analysis. Moreover, 4 a/4 b show much stronger affinity toward C₇₀ than C₆₀. Consequently, 4 a/4 b are able to separate C₆₀ and C₇₀ from their mixture, giving the purity of C₆₀ up to 99.5 %.     

Synthesis and nonlinear optical properties of side chain liquid crystalline polymers containing azobenzene push–pull chromophores

Azobenzene monomeric precursors bearing piperazine as donor moiety with different withdrawing groups and derived side chain polymethacrylates have been prepared and characterized. Monomers having terminal cyano or nitro groups, and the corresponding polymers, exhibited smectic A phases. Linear and nonlinear optical properties of every monomer and thin films of the cyano polymer ( pol‐PZ‐CN ) have been also studied. UV‐vis spectroscopy revealed out‐of‐plane orientation in the as prepared films, as confirmed by waveguide refractive index measurements. Moreover, absorption spectra indicated the presence of azo aggregates in these films. The initial molecular arrangement has been modified by applying thermal annealing within the mesophase range and UV‐blue irradiation. Although thermal annealing resulted in a significant amplification of the out‐of‐plane optical anisotropy due to thermotropic self‐organization of side chain azo moieties, irradiation with 440 nm light induced some disruption of aggregates. The nonlinear optical response of Corona poled films has been studied by second harmonic generation measurements, and the influence of the molecular arrangement on the nonlinear d_ij coefficients has been analyzed. The more efficient poling corresponded to preirradiated films. In any case, a noticeable degree of polar order (70% of the initial d₃₃ value) remained for several months after the poling in films kept at RT. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 232–242, 2010     

Channeling Exciton Migration into Electron Transfer in Formamidinium Lead Bromide Perovskite Nanocrystal/Fullerene Composites

Hydrophobically capped nanocrystals of formamidinium lead bromide (FAPbBr₃) perovskite (PNC) show bright and stable fluorescence in solution and thin‐film states. When compared with isolated PNCs in a solution, close‐packed PNCs in a thin film show extended fluorescence lifetime (ca. 4.2 μs), which is due to hopping or migration of photogenerated excitons among PNCs. Both fluorescence quantum efficiency and lifetime decrease in a PNC thin film doped with fullerene (C₆₀), which is attributed to channeling of exciton migration into electron transfer to C₆₀. On the other hand, quenching of fluorescence intensity of a PNC solution is not accompanied by any change in fluorescence lifetime, indicating static electron transfer to C₆₀ adsorbed onto the hydrophobic surface of individual PNCs. Exciton migration among close‐packed PNCs and electron transfer to C₆₀ places C₆₀‐doped PNC thin films among cost‐effective antenna systems for solar cells.     

Soluble alkyl substituted poly(3,4‐propylenedioxyselenophene)s: A new platform for optoelectronic materials

Optical and electrochemical properties of regiosymmetric and soluble alkylenedioxyselenophene‐based electrochromic polymers, namely poly(3,3‐dibutyl‐3,4‐dihydro‐2H‐selenopheno[3,4‐b][1,4]dioxephine) (PProDOS‐C₄), poly(3,3‐dihexyl‐3,4‐dihydro‐2H‐selenopheno[3,4‐b][1,4]dioxephine) (PProDOS‐C₆), and poly(3,3‐didecyl‐3,4‐dihydro‐2H‐selenopheno[3,4‐b][1,4]dioxephine) (PProDOS‐C₁₀), are highlighted. It is noted that these unique polymers have low bandgaps (1.57–1.65 eV), and they are exceptionally stable under ambient atmospheric conditions. Polymer films retained 82–97% of their electroactivity after 5000 cycles. The percent transmittance of PProDOS‐C_n (n = 4, 6, 10) films found to be between 55 and 59%. Furthermore, these novel soluble PProDOS‐C_n polymers showed electrochromic behavior: a color change form pure blue to highly transparent state in a low switching time (1.0 s) during oxidation with high coloration efficiencies (328–864 cm² C^?1) when compared to their thiophene analogues. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Triptycene‐Derived Calix[6]arenes: Synthesis,Structures, and Their Complexation with Fullerenes C60 and C70

Two pairs of novel triptycene‐derived calix[6]arenes 4 a , b and 5 a , b have been efficiently synthesized through both one‐pot and two‐step fragment‐coupling strategies starting from 2,7‐bis(hydroxymethyl)‐1,8‐dimethoxytriptycene 1 . Subsequent demethylation of 4 a , b and 5 a , b with BBr₃ in dry dichloromethane gave the macrocyclic compounds 6 a , b and 7 a , b . Treatment of either 4 a or 6 a with AlCl₃ resulted in the same debutylated product 8 , while 9 was similarly obtained from either 5 a or 7 a . Structural studies revealed that all of the macrocycles have well‐defined structures with fixed conformations both in solution and in the solid state owing to the introduction of the triptycene moiety with a rigid three‐dimensional (3D) structure, making them very different from their classical calix[6]arene counterparts. As a consequence, it was found that all of these the triptycene‐derived calix[6]arenes could encapsulate small neutral molecules in their cavities in the solid state. Moreover, it was also found that the macrocycles 4 b and 5 b showed highly efficient complexation abilities toward fullerenes C₆₀ and C₇₀, forming 1:1 complexes with association constants ranging from (5.22±0.20)×10⁴ to (8.68±0.30)×10⁴ M ^?1.     

Synthesis and stability of linear and star polymers containing [C60] fullerene

Linear and symmetric star block copolymers of styrene and isoprene containing [C₆₀] fullerene were synthesized by anionic polymerization and appropriate linking postpolymerization chemistry. In all block copolymers, the C₆₀ was connected to the terminal polyisoprene (PI) block. The composition of the copolymers was kept constant (～30% wt PI), whereas the molecular weight of the diblock chains was varied. The polymers were characterized with a number of techniques, including size exclusion chromatography, membrane osmometry, and ¹H NMR spectroscopy. The combined characterization results showed that the synthetic procedures followed led to well‐defined materials. However, degradation of the fractionated star‐shaped copolymers was observed after storage for 2 months at 4 °C, whereas the nonfractionated material was stable. To further elucidate the reasons for this degradation, we prepared and studied a four‐arm star copolymer with the polystyrene part connected to C₆₀ and a six‐arm star homopolymer of styrene. These polymers as well as linear copolymers end‐capped, through ? N<, with C₆₀ were stable. Possible reasons are discussed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2494–2507, 2001     

A Triptycene‐Based Approach to Solubilising Carbon Nanotubes and C60

We describe herein the synthesis of a triptycene‐based surfactant designed with the ability to solubilise single‐walled carbon nanotubes (SWNTs) and C₆₀ in water through non‐covalent interactions. Furthermore, an amphiphilic naphthalene‐based surfactant with the same ability to solubilise SWNTs and C₆₀ has also been prepared. The compounds synthesised were designed with either two ionic or non‐ionic tails to ensure a large number of supramolecular interactions with the solvent, thereby promoting strong solubilisation. The surfactants produced stable suspensions in which the SWNTs are dispersed and the surfactant/SWNT complexes formed are stable for more than one year. UV/Vis/NIR absorption spectroscopy, TEM and AFM were employed to probe the solubilisation properties of the dispersion of surfactants and SWNTs in water.     

Synthesis and nonlinear optical properties of high glass transition poly(maleimide-4-phenylstyrene)s

Nonlinear optical polymers with high T_g were prepared by polymer analogous reaction of maleic anhydride copolymers with aminoalkyl-functionalized azo chromophores. Poled films of the polymers show a good nonlinear optical response that is stable at temperatures up to 125°C.     

Click chemistry‐based synthesis of azo polymers for second‐order nonlinear optics

Four linear polymers containing pendant azo moiety were synthesized through click chemistry for second‐order nonlinear optical study. The polymers were found soluble in most of the polar organic solvents such as tetrahydrofuran (THF), chloroform, and dimethyl formamide (DMF). The polymers showed thermal stability up to 300 °C and glass transition temperatures (T_g) in the range of 120–140 °C. The molecular weights (M_w) of these polymers (measured by gel permeation chromatography) were in the range 37,900–55,000 g/mol. The polymers were found to form optically transparent films by solution casting from THF solution. Order parameters were calculated from UV–vis absorption spectra. The morphology changes in the films after poling were characterized by atomic force microscopy. The angular dependence, temperature dependence, and time dependence of second harmonic generation (SHG) intensity were obtained by using 1064 nm Nd:YAG laser. The SHG intensity remained unchanged up to 95 °C. At room temperature, it remained stable up to 8 days after initial drop of about 14%. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Monolayers and Langmuir–Blodgett films of amphiphilic tetramethylsulphonatocalix[4]resorcinarene and their interactions with polyethyleneimine and caeruloplasmin

The paper deals with the surface films of amphiphilic tetramethylsulphonatocalixresorcinarene (R = C₁₁H₂₃) 1 insoluble in water but forms rigid stable non-collapsing films at the water–air interface. Compression isotherms were used to investigate the interactions of the macrocycle films with two polymers fed to the aqueous subphases: synthetic – polyethyleneimine (PEI) and natural – an oxidase enzyme caeruloplasmin (CP). The interactions of the surface films of 1 with these substrates are predominantly dictated by the nature of the macromolecules and not by macrocycle interactions with their individual fragments. CP having retained its globular structure was extracted in the layer of 1 and became the dominating component of the film. The synthetic macromolecule of PEI, six times lower in its weight than CP, did not affect the morphology of the interfacial film, involved in the interactions only with its hydrophilic part directed inside the water.     

Computer simulation of polyolefin interfaces

Interfaces, thin films and amorphous cells of several hydrocarbon polymers are studied with atomistic computer simulation. Solubility parameters, surface tensions and interfacial tensions are evaluated from the computed structures. These structures are constructed using Molecular Dynamics and Molecular Mechanics techniques. The various components of the energetic interactions (torsional, vdW, etc.) are examined in detail in order to gain an insight into the nature of the regular and anomalous interactions between these films.The polymers studied in this article are all are atactic linear hydrocarbons and have approximately 200 carbons in the backbone chain. These include polypropylene (PP), head to head polypropylene (hhPP), a polymer which is termed P78 (a random copolymer composed of 22% of a linear (–CH₂CH₂CH₂CH₂–) monomer and 78% of a branched (–CH₂CH(C₂H₅)–) monomer), polyethylenepropylene (PEP), and PE2P2 (an alternating copolymer consisting of two ethylene (E) and two propylene (P) monomers in the repeating pattern (–(EEPP)_n–)). The primary difference between the different polymers studied is the type of side group (ethyl or methyl) and the location, frequency and spacing of that group.Interfaces formed with the same polymer type (PP–PP, PEP–PEP, P78–P78) yield a surface tension close to zero as expected. Attractive interactions between some of the pairs of films is found in the simulation. The distribution among the energetic terms seems to indicate that this attractive interaction is brought about by favorable local intramolecular energetic terms rather than simply by van der Waals interactions alone.     

The Effect of –(C6F4)– on the Surface Free Energy of Main‐Chain Liquid Crystalline and Crystalline Polymers

Novel fluorinated main‐chain liquid‐crystalline/crystalline polymers were prepared through thin film polymerization to investigate the effect of –(C₆F₄)– on the surface free energy. The fluorine in the phenyl rings does not lower the total surface free energy of the thin copolymer films, compared to those without fluorine. Interestingly, the Lewis acid components (γ⁺) of the surface free energy of the fluorine‐containing polymers increase with an increase in the –(C₆F₄)– content, indicating the increasing electron accepting character of the surface.