Cover Feature: Oxidation of Benzyl Alcohol Using Cobalt Oxide Supported Inside and Outside Hollow Carbon Spheres (ChemistryOpen 6/2021)

The Cover Feature shows the cobalt oxide nanoparticles supported both inside and outside hollow carbon spheres (HCSs), which serve as a catalyst for benzyl alcohol oxidation. A metal oxidation step prior to the reaction enhanced the catalytic activity of benzyl alcohol which was used as a model reaction for the catalysts. Both catalysts showed similar activity and selectivity (to benzaldehyde) whether placed inside or outside the HCSs (70% selectivity at 50% conversion). No poisoning was observed due to product build up in the HCSs. More information can be found in the Full Paper by Pumza Mente et al.     

Bimetallic Au-Pd NPs Embedded in MOF Ultrathin Nanosheets with Tuned Surface Electronic Properties for High-performance Benzyl Alcohol Oxidation

Bimetallic Au-Pd nanoparticles(NPs) with synergistic effect between Au and Pd atom have shown excellent catalytic activity toward benzyl alcohol oxidation. The catalytic activities of metal NPs supported within metal-organic frameworks (MOFs) are affected by the electronic interactions between metal NPs and MOFs. Taking the advantages of ultrathin nanosheets, we confine the highly dispersed Au-Pd NPs within ultrathin nanosheets of MOF-Ni(NMOF-Ni) to fabricate Au_xPd_y@NMOF-Ni as catalysts. Under base-free and atmospheric pressure conditions, the as-prepared Au_xPd_y@NMOF-Ni catalysts exhibit superior activity and selectivity for benzyl alcohol oxidation. This work highlights the synergistic effects among different components in composite catalysts effectively improving the activity and offers a new way for designing efficient catalysts toward benzyl alcohol oxidation.     

Effect of catalyst confinement and pore size on Fischer-Tropsch synthesis over cobalt supported on carbon nanotubes

This paper studies the impact of structure of cobalt catalysts supported on carbon nanotubes(CNT) on the activity and product selectivity of Fischer-Tropsch synthesis(FTS) reaction.Three types of CNT with average pore sizes of 5,11,and 17 nm were used as the supports.The catalysts were prepared by selectively impregnating cobalt nanoparticles either inside or outside CNT.The TPR results indicated that the catalyst with Co particles inside CNT was easier to be reduced than those outside CNT,and the reducibility of cobalt oxide particles inside the CNT decreased with the cobalt oxide particle size increasing.The activity of the catalyst with Co inside CNT was higher than that of catalysts with Co particles outside CNT.Smaller CNT pore size also appears to enhance the catalyst reduction and FTS activity due to the little interaction between cobalt oxide with carbon and the enhanced electron shift on the non-planar carbon tube surface.     

Reaction mechanism of aerobic oxidation of alcohols conducted on activated-carbon-supported cobalt oxide catalysts

Catalytic performances and the reaction mechanism of Co(3)O(4)/AC (AC=activated carbon) for aerobic oxidation of alcohols carried out in the liquid phase were investigated. Co(3)O(4)/AC shows a high activity for aerobic oxidation of benzyl alcohol, comparable to noble metal catalysts (e.g., Au/AC) even in the absence of additives or promoters (e.g., NaOH). Changing preparation conditions, such as treatment temperature and/or time, can affect the catalytic performances of Co(3)O(4)/AC, due to decomposition of surface groups of the carbon support. Careful studies show that low alcohol conversions are obtained with either Co(3)O(4) or AC alone, which indicates that the high conversion observed over the Co(3)O(4)/AC is due to a synergistic effect between Co(3)O(4) and AC. Parallel experiments using a high-surface-area covalent triazine framework or oxygen-inert carbon nitride as support for the Co(3)O(4) catalyst also show lower conversions, which suggest that the ability of AC (in Co(3)O(4)/AC) to activate molecular oxygen is essential for the reaction. FTIR and XPS spectra taken from catalysts before and after the reaction confirm that oxygen activation proceeds mainly on the carbon support. As a result, it can be assumed that the alcohol dehydrogenation step proceeds on the metal oxide, whereas the oxygen activation step occurs mainly on the carbon support.     

富氮空心蠕虫状碳材料的合成及其苯甲醇非金属选择性催化氧化的高活性

Carbon materials have become one of the research hotspots in the field of catalysis as a typical representative of non-metallic catalytic materials. Herein, a facile synthetic strategy is developed to fabricate a series of hollow carbon nanoworms (h-NCNWs) that contain nitrogen up to 9.83 wt% by employing graphitic carbon nitride (g-C₃N₄) as the sacrificing template and solid nitrogen source. The h-NCNWs catalysts were characterized by X-ray diffraction (XRD), high-resolution transmission electron microscope (HR-TEM), N₂ adsorption-desorption, Fourier transform infrared spectroscopy (FT-IR), thermal gravimetric (TG), Raman spectra, and X-ray photoelectron spectroscopies (XPS). The catalytic activities of the h-NCNWs catalysts for selective oxidation of benzyl alcohol with O₂ were also evaluated. The characterization results revealed that the h-NCNWs catalysts displayed a unique hollow worm-like nanostructure with turbostratic carbon shells. The nitrogen content and shell thickness can be tuned by varying the relative ratio of resorcinol to g-C₃N₄ during the preparation process. Furthermore, nitrogen is incorporated to the carbon network in the form of graphite (predominantly) and pyridine, which is critical for the enhancement of the catalytic activity of carbon catalysts for the selective oxidation of benzyl alcohol. At a reaction temperature of 120 ℃, a 24.9% conversion of benzyl alcohol with > 99% selectivity to benzaldehyde can be achieved on the h-NCNWs catalyst prepared with a mass ratio of resorcinol to g-C₃N₄ of 0.5. However, the catalytic activities of the h-NCNWs catalysts were dependent on the amount of N dopants, in particular graphitic nitrogen species. The conversion of benzyl alcohol markedly decreased to 13.1% on the h-NCNWs catalyst prepared with a mass ratio of resorcinol to g-C₃N₄ of 1.5. Moreover, the h-NCNWs catalyst showed excellent stability during the reaction process. The conversion of benzyl alcohol and the high selectivity to aldehyde can be kept within five catalytic runs over the h-NCNWs0.5 catalyst. These results indicate that rationally designed carbon materials have great potential as highly efficient heterogeneous catalysts for oxidation reactions.     

Influence Type and Temperature of Activation on the Catalytic Activity of Derived Form of Au 101 Nanocatalysts

Recently, gold nanoparticles attracted an increased attention due to unusual and somewhat unexpected catalytic properties especially pronounced in the oxidation of some organic compounds. Gold nanoparticles, which was immobilized on powder Norit® activated carbon as a support (1.0 wt % Au101/AC) exhibited high activity and selectivity for benzyl alcohol oxidation particularly with the gold catalysts subjected to a specific type of activation and temperature. The interaction between Au101 particles and its support was studied by measuring the catalytic activity and selectivity as a function of activation procedure. The first method included washing with a solvent (i.e., toluene) at elevated temperature, and/or followed by heat treatments at mild temperatures (i.e., 100 and 200°C for 3 h). The highest catalytic activity of benzyl alcohol oxidation was however obtained when gold catalysts were pre-washed with hot toluene at 100°C for 2 h followed by thermal treatment under vacuum. In these cases, the gold core diameters was ∼3.5 nm. In a number of experiments, the reaction time was 3 h, whereas in other runs it was extended to 24 h. The conversion level of benzyl alcohol oxidation was affected by the type of activation and its temperature related to the gold particles size.     

Co/Ce0.5Zr0.5O2催化剂的制备及甲烷部分氧化制合成气

利用共沉淀法制备了具有介孔结构的Ce_0.5Zr_0.5O₂固溶体载体,然后浸渍不同质量分数(10%、20%、30%)的活性组分钴,制备了系列Co/Ce_0.5Zr_0.5O₂催化剂。利用N₂物理吸附(BET)、X射线粉末衍射(XRD)、H₂-程序升温还原(H₂-TPR)、扫描电子显微镜(SEM) 、透射电子显微镜(TEM) 、 程序升温氧化(TPO)和热重(TG)等手段对制备和反应后的催化剂进行了表征,研究了它们对甲烷部分氧化制合成气反应的催化性能。研究结果表明,铈锆固溶体负载的钴比较容易被还原,该系列催化剂具有较高的活性和对H₂及CO的选择性,且随Co含量的增加,催化剂的活性和对H₂和CO的选择性得到提高的同时,也增强了催化剂的抗积炭性能。     

Zn取代的磷钨酸季铵盐无溶剂氧化苯甲醇合成苯甲醛

合成了一系列过渡金属Zn取代的Keggin型磷钨杂多酸的季铵盐,采用傅里叶变换红外光谱(FTIR)、X射线衍射(XRD)等方法表征了杂多化合物的结构.并将其用于苯甲醇无溶剂氧化合成苯甲醛的反应,考察了催化剂种类、反应条件对苯甲醇氧化的影响.实验结果表明,在无任何溶剂的情况下,Zn取代的Keggin型磷钨四丁基铵盐具有最佳的催化活性,反应时间仅为30 min,苯甲醇的转化率可以达到95.6%,苯甲醛的选择性达到了96.4%.在对杂多酸季铵盐结构的研究基础上,对可能的反应机理进行了初步探讨.     

Phosphotungstic acid supported on mesoporous carbon as a catalyst for the oxidation of benzyl alcohol

Phosphotungstic acid (PTA) was successfully supported on synthesized mesoporous carbon (MC) through impregnating method to yield a series of PTA/MC catalysts, the content of PTA from 16 to 43 wt %. The catalysts were characterized by FTIR spectroscopy, X-ray diffraction, N2 adsorption-desorption isotherm tests and transmission electron microscopy. The characterization data revealed that intact Keggin ion of PTA is kept in the support, and PTA is located equably inside the pores of MC. The catalytic activities of these catalysts were tested in selective oxidation of benzyl alcohol to benzaldehyde using 30% hydrogen peroxide as oxidant. The results indicated that 28 wt % PTA/MC catalyst with high specific surface area (474 m²/g) and uniform pore size (6.4 nm) possess the best catalytic activity (conversion of 82.6% and selectivity of 94.0%) among all prepared catalysts.     

Mn-Al和Cu-Mn-Al复合氧化物催化苯甲醇选择氧化反应

用溶胶-凝胶法制备了不同组成的Mn-Al和Cu-Mn-Al复合氧化物两组催化剂,用于苯甲醇选择氧化反应.用X射线衍射(XRD)、N2物理吸附(BET)、扫描电镜(SEM)、H_2程序升温还原(H_2-TPR)、O_2程序升温脱附(O_2-TPD)和X射线光电子能谱(XPS)技术对催化剂进行了结构表征,考察了催化剂组成对催化活性的影响.结果表明:以甲苯为溶剂,O_2为氧化剂,353 K反应5 h,Mn_2Al和Cu_(0.3)Mn_(0.7)Al_2催化剂上的苯甲醇转化率分别为36.6%和40.9%,苯甲醛选择性均为100%.进一步研究表明:催化剂活性与其H2还原性和O_2吸附性有关,高活性的催化剂吸附氧多,生成的活性氧易参与反应.     

Ag/SBA-15低温气相选择性催化氧化苯甲醇合成苯甲醛

以SBA-15为载体,采用浸渍法制备了不同Ag含量的Ag/SBA-15,通过N₂吸附-脱附、X射线衍射、扫描电子显微镜、高分辨透射电子显微镜、X射线光电子能谱和电感耦合等离子体质谱对催化剂进行了表征。将Ag/SBA-15用于苯甲醇气相选择性催化氧化合成苯甲醛,研究了反应条件对转化率和选择性的影响。结果表明,Ag/SBA-15具有均一的一维孔道结构、较厚的孔壁（3-5 nm）及较大的比表面积（411-541 m²/g）,其规整纳米空间的限域作用使一定负载量的Ag以纳米尺寸均匀分散于介孔SBA-15孔道内,增加了活性组分的比表面积。亲核性氧物种从Ag到SBA-15表面的氧溢流,提高了低温下Ag/SBA-15对苯甲醇气相选择性氧化合成苯甲醛的催化性能。5.3% Ag/SBA-15中的Ag粒径为5-6 nm,且均匀分散于载体孔道中,反应温度为220℃时,苯甲醇转化率为87%,苯甲醛选择性为95%;240℃时,苯甲醇转化率和苯甲醛选择性分别高达94%和97%;并在240-300℃范围内,其催化活性和选择性保持不变,表现出了良好的温度耐受能力。催化剂经活化再生可以连续使用40 h,选择性基本保持不变。     

钴镁铝类水滑石液相选择性催化苯甲醇氧化合成苯甲醛

采用共沉淀法制备了不同Co₂AlMg_x(x=0.5、1、1.5和2)原子比的类水滑石,用X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、傅里叶变换红外光谱(FT-IR)、表面孔吸附(BET)及电感耦合等离子光谱(ICP)等技术手段表征了催化剂的结构、组成和比表面积,并考察了其催化苯甲醇选择氧化制苯甲醛的性能。 结果表明,随着Mg含量的增加,催化剂的碱性增强,苯甲醛的选择性提高。 在优化条件:苯甲醇0.02 mol,催化剂Co₂AlMg₁类水滑石100 mg,过氧化氢叔丁醇0.04 mol,溶剂乙腈8 mL,反应温度60 ℃,反应时间9 h下,苯甲醇的转化率为39.5%,苯甲醛的选择性达到89.2%。 催化剂重复使用5次后其活性与选择性未见明显降低,表明催化剂具有较好的稳定性。     

纳米孔炭负载 MnOx 催化剂上苯甲醇氧化反应性能

 以纳米孔炭 (NC) 为载体, 采用浸渍法制备了一系列 MnOx/NC 催化剂, 并用于以空气为氧源的苯甲醇液相氧化反应. 通过 X 射线衍射、X 射线光电子能谱、N2 吸附-脱附和 H2-程序升温还原等手段对催化剂进行了表征, 考察了催化剂中 Mn 负载量和焙烧温度, 以及反应条件等对反应性能的影响. 结果表明, 10%MnOx/NC 催化剂的活性较高, 反应 4 h 后苯甲醇转化率可达 80.4%; 明显高于活性炭负载的 MnOx 催化剂. 这主要归因于其表面存在大量高分散、且易于还原的 Mn 物种.     

金属卟啉/MgAl水滑石催化醇选择性氧化制备羰基化合物

将MgAl水滑石引入到金属四苯基卟啉(MTPPs,M=Co,Fe,Mn,Ni)催化氧化体系中,实现了醇的选择性氧化。 结果表明,在分子氧/异丁醛体系中,CoTPP在苯甲醇氧化制苯甲醛反应中表现出优异的催化活性,MgAl水滑石添加剂可有效地提高醛的选择性。 在苯甲醇1 mmol、乙腈2 mL、CoTPP 5 mg、MgAl水滑石18 mg、异丁醛5 mmol、反应温度60 ℃、氧气气氛下反应2 h,苯甲醇的转化率和苯甲醛的选择性分别达到94%和92%。 另外,此催化体系在其它醇类化合物的氧化反应中也具有较好催化活性。     

Bimetallic oxide nanoparticles confined in ZIF‐67‐derived carbon for highly selective oxidation of saturated C–H bond in alkyl arenes

Zeolite imidazolate frameworks (ZIFs) have recently emerged as an ideal type of carbon precursors with abundant tailorability. In this work, a series of ZIF‐derived porous carbon catalysts have been prepared with encapsulation of bimetallic oxide nanoparticles via simple thermal treatment. The composition and structure of these catalysts were confirmed in detail by different characterization methods. The bimetallic oxide (Mn/Co, Fe/Co, and Cu/Co) nanoparticles were encapsulated in the nitrogen‐doped graphitized carbon matrix. Moreover, the hierarchically porous structure and carbon defects were successfully constructed in the carbon catalysts. Additionally, in the selective oxidation of saturated C–H bonds in alkyl arenes, the carbon catalysts demonstrate outstanding performance for the oxidation of C–H bonds to corresponding carboxyl groups. This was due to their unique structure can greatly promote mass transfer and molecular oxygen activation, resulting in high conversion and high selectivity. Remarkably, this work here could also provide a novel strategy to the controllable synthesis of metal–organic frameworks (MOFs)‐derived carbon catalysts for enhanced performance in heterogeneous catalysis.     

K-Co-Mo-C催化剂的制备及其合成低碳醇的性能

 采用溶胶-凝胶法制备了含碳的K-Co-Mo-C催化剂,通过改变碳前驱体的添加量以获得不同的碳含量,测试了催化剂上合成气制混合醇的性能. 结果表明,适量的残留碳增加了催化剂中活性相的分散度,提高了合成醇的收率和选择性,但过量的碳导致烃的选择性增加而醇的选择性下降,这是由于随着碳前驱体添加量的增加,催化剂中的Mo物种更容易被还原成金属态. 与惰性气氛中焙烧的样品不同,空气中焙烧的样品中没有碳的存在,氧化物组分容易生成难以还原的物相,合成醇活性较低. 含碳量为2.8%的样品具有最大的比表面积和孔体积,同时也具有最高的醇收率和选择性. 惰性气氛中高温焙烧样品导致其合成醇活性明显降低,但同时高碳醇的选择性增加.     

金属络合物制备分子筛负载金属催化剂的CO加氢反应性能

应用Ｙ分子筛吸附Ｆｅ（ＣＯ）５、Ｃｏ（ＣＯ）３ＮＯ和Ｍｏ（ＣＯ）６的温和热分解制备分子筛负载金属催化剂，从分子筛交换阳离子和吸附金属络合物之间的相互作用说明其ＣＯ加氢产物的分布特点。实验结果表明，分子筛内阳离子和吸附金属络合物间的相互作用显著影响制得催化剂的结构和反应的产物分布。由于金属络合物和分子筛内阳离子间的电子转移，使ＮｉＹ附载金属催化剂显示出高的ＣＯ转化率和甲烷选择性。在ＣｕＹ中，这种电子     

Cu-BTC及其衍生物在苯甲醇选择氧化反应中的催化活性

以硝酸铜和均苯三甲酸(BTC)为原料,水热合成了一种金属有机骨架化合物Cu-BTC,在水相中催化苯甲醇选择氧化反应,H2O2氧化剂,优化了Cu-BTC的晶化条件.70℃反应1 h,Cu-BTC(110C/24 h)上的苯甲醇转化率为75.4%、苯甲醛选择性83.5%,但反应后Cu-BTC骨架完全塌陷.在氮气中高温焙烧Cu-BTC,制得衍生物Cu@C,也用于催化苯甲醇氧化反应.结果表明:Cu@C催化剂重复使用5次,可维持较高的苯甲醇转化率,但苯甲醛选择性有所下降.用X射线衍射(XRD)、N2物理吸附(BET)、热分析(TG-DSC)、红外光谱(FTIR)、能量色散X射线光谱分析(EDX)等技术对催化剂进行了结构表征,发现:Cu@C在反应中生成的Cu2O促进了苯甲醛的深度氧化.     

多金属氧酸盐催化苯甲醇的选择性氧化：一个绿色可循环的高效催化氧化体系

以Keggin结构的几类杂多酸和三乙胺（TEA）为原料,通过简单的酸碱反应合成了相应杂多酸的TEA盐。 并以它们作为催化剂,30％H2O2作氧化剂,在不使用长链相转移剂的条件下,研究了它们催化苯甲醇选择氧化制备苯甲醛的反应性能。 结果表明,该类催化剂在苯甲醇的选择氧化反应中具有比相应杂多酸更高的催化活性或选择性。 其中[TEAH]H2PW12O40为最佳催化剂,在适宜的反应条件下,该催化剂上苯甲醇转化率可达99.5％以上,苯甲醛选择性达~100％。 催化剂可以被分离和循环使用多次,活性、选择性基本不变。 用水作溶剂,避免了有机溶剂的使用,是一个高效、绿色的苯甲醛选择氧化体系。     

Au-Pd supported nanocrystals prepared by a sol immobilisation technique as catalysts for selective chemical synthesis

Catalysis by gold and gold-palladium nanoparticles has attracted significant research attention in recent years. These nanocrystalline materials have been found to be highly effective for selective and total oxidation, but in most cases the catalysts are prepared using precipitation or impregnation. We report the preparation of Au-Pd nanocrystalline catalysts supported on carbon prepared via a sol-immobilisation technique and these have been compared with Au-Pd catalysts prepared via impregnation. The catalysts have been evaluated for two selective chemical syntheses, namely, oxidation of benzyl alcohol and the direct synthesis of hydrogen peroxide. The catalysts have been structurally characterised using a combination of scanning transmission electron microscopy and X-ray photoelectron spectroscopy. The catalysts prepared using the sol immobilisation technique show higher activity when compared with catalysts prepared by impregnation as they are more active for both hydrogen peroxide synthesis and hydrogenation, and also for benzyl alcohol oxidation. The method facilitates the use of much lower metal concentrations which is a key feature in catalyst design, particularly for the synthesis of hydrogen peroxide.