Reversible Handedness Inversion and Circularly Polarized Light Reflection Tuning in Self-Organized Helical Superstructures Using Visible-Light-Driven Macrocyclic Chiral Switches

A series of macrocyclic azobenzene-based chiral photoswitches have been judiciously designed, synthesized, and characterized. In the molecular structures, binaphthyl is covalently linked to ortho-positions of azobenzene, and four different substituents are linked to 6,6′-positions of binaphthyl. The photoswitches show enhanced helical twisting power (HTP) when doping in commercially available achiral liquid crystals to form self-organized helical superstructures, i.e., cholesteric liquid crystals (CLCs). All the photoswitches exhibit reversible photoisomerization driven by visible light of different wavelengths in both organic solvent and liquid crystals. The photoswitches with shorter substituents enable handedness inversion of CLCs upon photoisomerization. These are the first examples of ortho-linked azobenzene-based photoswitches that enable handedness inversion in CLCs. The photoswitches with longer substituents display only HTP values decreasing while maintaining the same handedness.     

Control and optical mapping of mechanical transitions in polymer networks and DNA-based soft materials

Complex mechanical changes in response to an external trigger are pervasive in natural soft materials and often sought for applications. Be it the reversible stiffening of sea cucumber, the failure of a polymeric or colloidal gel under load, or the dissolution of a biosensing hydrogel upon target binding, mechanical transitions are typically enabled, and critically affected, by heterogeneous structures and reversible bonds. New possibilities to monitor evolving properties and to gain access to stress propagation with temporal and spatial resolution are being disclosed by mechanochromic molecules and molecular complexes, which transduce a mechanical stress into a light signal and act as built-in stress reporters. I will review recent strategies and identify future directions for the design of mechanically responsive soft networks and for their optical mapping, focusing particular attention on the emerging class of hydrogels based on DNA self-assembly.     

Photomechanical Organic Crystals as Smart Materials for Advanced Applications

Photomechanical molecular crystals are receiving much attention due to their efficient conversion of light into mechanical work and advantages including faster response time; higher Young's modulus; and ordered structure, as measured by single-crystal X-ray diffraction. Recently, various photomechanical crystals with different motions (contraction, expansion, bending, fragmentation, hopping, curling, and twisting) are appearing at the forefront of smart materials research. The photomechanical motions of these single crystals during irradiation are triggered by solid-state photochemical reactions and accompanied by phase transformation. This Minireview summarizes recent developments in growing research into photoresponsive molecular crystals. The basic mechanisms of different kinds of photomechanical materials are described in detail; recent advances in photomechanical crystals for promising applications as smart materials are also highlighted.     

Reversible Phase Transition of Robust Luminescent Hybrid Hydrogels

We report herein on remote control over a reversible phase transition of robust luminescent hybrid hydrogels as enabled by the rational selection and incorporation of photoswitches. Azobenzene units functionalized with a guanidinium group were utilized as the photoswitches and incorporated through a host–guest inclusion method involving α‐cyclodextrins functionalized with 2,6‐pyridinedicarboxylic acid (PDA) groups. While the guanidinium functional groups bind to the negatively charged Laponite matrix surface to connect organic and inorganic components, the PDA groups enable simultaneous coordination with different lanthanide metal ions, thus rendering the hydrogel broadly luminescent. Owing to its conformation‐dependent binding behavior with α‐cyclodextrin, the isomerization of azobenzene induced association or dissociation of the inclusion complexes and thus lead to a reversible photocontrolled sol?gel phase transition of the luminescent hybrid hydrogels.     

Fabrication of Photoactuators: Macroscopic Photomechanical Responses of Metal–Organic Frameworks to Irradiation by UV Light

Photoreactive olefinic species are incorporated into a metal–organic framework (MOF), [Zn(bdc)(3‐F‐spy)] ( 1 ). Single crystals of 1 are shown to undergo three types of photomechanical macroscopic deformation upon illumination by UV light. To demonstrate the practical potential of this system, the inclusion of 1 in a PVA (polyvinyl alcohol) composite membrane, by exploiting hydrogen‐bonding interactions, is presented. Using this composite membrane, the amplification of mechanical stress to achieve macroscopic actuation behavior is demonstrated. These results pave the way for the generation of MOF‐based soft photoactuators that produce clearly defined mechanical responses upon irradiation with light. Such systems are anticipated to have considerable potential in photomechanical energy harvesting and conversion systems.     

Fluorinated Azobenzenes for Shape‐Persistent Liquid Crystal Polymer Networks

Liquid crystal polymer networks respond with an anisotropic deformation to a range of external stimuli. When doped with molecular photoswitches, these materials undergo complex shape modifications under illumination. As the deformations are reversed when irradiation stops, applications where the activated shape is required to have thermal stability have been precluded. Previous attempts to incorporate molecular switches into thermally stable photoisomers were unsuccessful at photogenerating macroscopic shapes that are retained over time. Herein, we show that to preserve photoactivated molecular deformation on the macroscopic scale, it is important not only to engineer the thermal stability of the photoswitch but also to adjust the cross‐linking density in the polymer network and to optimize the molecular orientations in the material. Our strategy resulted in materials containing fluorinated azobenzenes that retain their photochemical shape for more than eight days, which constitutes the first demonstration of long‐lived photomechanical deformation in liquid‐crystal polymer networks.     

Reversible Photoswitching of a Spin‐Crossover Molecular Complex in the Solid State at Room Temperature

Spin‐crossover metal complexes are highly promising magnetic molecular switches for prospective molecule‐based devices. The spin‐crossover molecular photoswitches developed so far operate either at very low temperatures or in the liquid phase, which hinders practical applications. Herein, we present a molecular spin‐crossover iron(II) complex that can be switched between paramagnetic high‐spin and diamagnetic low‐spin states with light at room temperature in the solid state. The reversible photoswitching is induced by alternating irradiation with ultraviolet and visible light and proceeds at the molecular level.     

Fabrication of Light‐Triggered Soft Artificial Muscles via a Mixed‐Matrix Membrane Strategy

Artificial muscles triggered by light are of great importance, especially for the development of non‐contact and remotely controlled materials. Common materials for synthesis of photoinduced artificial muscles typically rely on polymer‐based photomechanical materials. Herein, we are able to prepare artificial muscles using a mixed‐matrix membrane strategy to incorporate photomechanical molecular crystals with connective polymers (e.g. PVDF). The formed hybrid materials inherit not only the advantages of the photomechanical crystals, including faster light response, higher Young's modulus and ordered structure, but also the elastomer properties from polymers. This new type of artificial muscles demonstrates various muscle movements, including lifting objects, grasping objects, crawling and swimming, triggered by light irradiation. These results open a new direction to prepare light‐driven artificial muscles based on molecular crystals.     

Diarylethene microcrystals make directional jumps upon ultraviolet irradiation

Microcrystals of a diarylethene {1,2-bis[5'-methyl-2'-(2"-pyridyl)thiazolyl]perfluorocyclo-pentene} undergo jumps upon photoirradiation. These photochromic crystals present molecular structural changes upon irradiation with ultraviolet light because of reversible photocyclization reactions. When the energy absorbed by crystals reaches about 10 microJ, the uniaxial stress induced in the crystal lattice relaxes through directional jumps. If one prevents crystals from jumping, then parallel, equidistant cracks appear on crystal surfaces. These photomechanical effects could result from a Grinfeld surface instability.     

Phase Transition-Promoted Rapid Photomechanical Motions of Single Crystals of a Triene Coordination Polymer

Molecular crystals with the ability to transform light energy into macroscopic mechanical motions are a promising class of materials with potential applications in actuating and photonic devices. In regard to such materials, coordination polymers that exhibit dynamic photomechanical motion, associated with a phase transition, are unknown. Herein, we report an intriguing photoactive, one-dimensional Zn^II coordination polymer, 1 , derived from 1,3,5-tri-4-pyridyl-1,2-ethenylbenzene and 3,5-difluorobenzoate. Single crystals of 1 under UV light irradiation exhibit rapid shrinking and bending, violent bursting-jumping, splitting, and cracking behavior. Single-crystal X-ray diffraction analysis and ¹H NMR spectroscopy reveal an unusual photoinduced phase transition involving a single-crystal-to-single-crystal [2+2] cycloaddition reaction that results in photomechanical responses. Interestingly, crystals of 1 , which are triclinic with space group , are transformed into a higher symmetry, monoclinic cell with space group C2/c. This process represents a rare example of symmetry enhancement upon photoirradiation. The photomechanical activity is likely due to the sudden release of stress associated with strained molecular geometries and significant solid-state molecular movement arising from cleavage and formation of chemical bonds. A composite membrane fabricated from 1 and polyvinyl alcohol (PVA) also displays interesting photomechanical behavior under UV light illumination, indicating the material's potential as a photoactuator.     

Cross‐linking induced thermoresponsive hydrogel with light emitting and self‐healing property

Development of self‐healing hydrogels with thermoresponse is very important for artificial smart materials. In this article, the self‐healing hydrogels with reversible thermoresponses were designed through across‐linking‐induced thermoresponse (CIT) mechanism. The hydrogels were prepared from ketone group containing copolymer bearing tetraphenyl ethylene (TPE) and cross‐linked by naphthalene containing acylhydrazide cross‐linker. The mechanical property, light emission, self‐healing, and thermo‐response of the hydrogels were investigated intensively. With regulation of the copolymer composition, the hydrogels showed thermoresponse with the LCST varied from above to below body temperature. At the same time, the hydrogels showed self‐healing property based on the reversible characteristic of the acylhydrazone bond. The hydrogel also showed temperature‐regulated light emission behavior based on AIE property of the TPE unit. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 869–877     

Photomechanics of liquid-crystalline elastomers and other polymers

Muscle is a transducer that can convert chemical energy into mechanical motion. To construct artificial muscles, it is desirable to use soft materials with high mechanical flexibility and durability rather than hard materials such as metals. For effective muscle-like actuation, materials with stratified structures and high molecular orders are necessary. Liquid-crystalline elastomers (LCEs) are superior soft materials that possess both the order of liquid crystals and the elasticity of elastomers (as they contain polymer networks). With the aid of LCEs, it is possible to convert small amounts of external energy into macroscopic amounts of mechanical energy. In this Review, we focus on light as an energy source and describe the recent progress in the area of soft materials that can convert light energy into mechanical energy directly (photomechanical effect), especially the photomechanical effects of LCEs with a view to applications for light-driven LCE actuators.     

Azoheteroarene and Diazocine Molecular Photoswitches: Self-Assembly,Responsive Materials and Photopharmacology

Aromatic units tethered with an azo (−N=N−) functionality comprise a unique class of compounds, known as molecular photoswitches, exhibiting a reversible transformation between their E- and Z-isomers in response to photo-irradiation. Photoswitches have been explored extensively in the recent past to prepare dynamic self-assembled materials, optoelectronic devices, responsive biomaterials, and more. Most of such materials involve azobenzenes as the molecular photoswitch and to date, SciFinder lists more than 7000 articles and 1000 patents. Subsequently, a great deal of effort has been invested to improve the photo-isomerization efficiency and related mesoscopic properties of azobenzenes. Recently, azoheteroarenes and cyclic azobenzenes, such as arylazopyrazoles, arylazoisoxazoles, arylazopyridines, and diazocines, have emerged as second generation molecular photoswitches beyond conventional azobenzenes. These photoswitches offer distinct photoswitching behavior and responsive properties which make them highly promising candidates for multifaceted applications ranging from photoresponsive materials to photopharmacophores. In this minireview, we introduce the structural refinement and photoresponsive properties of azoheteroarenes and diazocines and summarize the state-of-the-art on utilizing these photoswitches as responsive building blocks in supramolecular assembly, material science and photopharmacology, highlighting their versatile photochemical behavior, enhanced functionality, and latest applications.     

Using light intensity to control reaction kinetics and reversibility in photomechanical crystals

4-Fluoro-9-anthracenecarboxylic acid (4F-9AC) is a thermally reversible (T-type) photomechanical molecular crystal. The photomechanical response is driven by a [4 + 4] photodimerization reaction, while the photodimer dissociation determines the reset time. In this paper, both the chemical kinetics of dimer dissociation (using a microscopic fluorescence-recovery-after-photobleaching experiment) and mechanical reset dynamics (by imaging bending microneedles) for single 4F-9AC crystals are measured. The dissociation kinetics depend strongly on the initial concentration of photodimer, slowing down and becoming nonexponential at high dimer concentrations. This dose-dependent behavior is also observed in the mechanical response of bending microneedles. A new feature in the photomechanical behavior is identified: the ability of a very weak control beam to suppress dimer dissociation after large initial dimer conversions. This phenomenon provides a way to optically control the mechanical response of this photomechanical crystal. To gain physical insight into the origin of the nonexponential recovery curves, the experimental results are analyzed in terms of a standard first-order kinetic model and a nonlinear Finke–Watzky (FW) model. The FW model can qualitatively reproduce the transition from exponential to sigmoidal recovery with larger initial conversions, but neither model can reproduce the suppression of the recovery in the presence of a weak holding beam. These results highlight the need for more sophisticated theories to describe cooperative phenomena in solid-state crystalline reactions, as well as demonstrating how this behavior could lead to new properties and/or improved performance in photomechanical materials.

The chemical and mechanical recovery rates of crystalline 4-fluoro-9-anthracenecarboxylic acid, a thermally reversible photomechanical material, can be controlled by both the intensity of the photodimerization pulse and the use of a weak hold beam.     

Visible‐Light‐Driven Halogen Bond Donor Based Molecular Switches: From Reversible Unwinding to Handedness Inversion in Self‐Organized Soft Helical Superstructures

Visible‐light‐driven molecular switches endowing reversible modulation of the functionalities of self‐organized soft materials are currently highly sought after for fundamental scientific studies and technological applications. Reported herein are the design and synthesis of two novel halogen bond donor based chiral molecular switches that exhibit reversible photoisomerization upon exposure to visible light of different wavelengths. These chiral molecular switches induce photoresponsive helical superstructures, that is, cholesteric liquid crystals, when doped into the commercially available room‐temperature achiral liquid crystal host 5CB, which also acts as a halogen‐bond acceptor. The induced helical superstructure containing the molecular switch with terminal iodo atoms exhibits visible‐light‐driven reversible unwinding, that is, a cholesteric–nematic phase transition. Interestingly, the molecular switch with terminal bromo atoms confers reversible handedness inversion to the helical superstructure upon irradiation with visible light of different wavelengths. This visible‐light‐driven, reversible handedness inversion, enabled by a halogen bond donor molecular switch, is unprecedented.     

分子印迹智能水凝胶的研究进展

智能水凝胶可以响应外界环境(如温度、pH、溶剂、离子强度、电场、磁场、光、压力和特异分子等)的变化,发生可逆体积相变,从而具有控制释放的能力.将分子印迹技术引入智能水凝胶,制备分子印迹智能水凝胶,不仅可以保持其环境响应性,更赋予其对特异分子的识别性能,从而可以根据外界环境的变化控制其对特定分子记忆功能的开关,实现自动识别并结合或释放特定分子.它有望应用于药物控释、生物传感和免疫分析等领域.本文综述了分子印迹智能水凝胶的研究现状,讨论了其目前所面临的挑战,并展望了其发展前景.     

Visible-Light-Driven Halogen Bond Donor Based Molecular Switches: From Reversible Unwinding to Handedness Inversion in Self-Organized Soft Helical Superstructures

Visible-light-driven molecular switches endowing reversible modulation of the functionalities of self-organized soft materials are currently highly sought after for fundamental scientific studies and technological applications. Reported herein are the design and synthesis of two novel halogen bond donor based chiral molecular switches that exhibit reversible photoisomerization upon exposure to visible light of different wavelengths. These chiral molecular switches induce photoresponsive helical superstructures, that is, cholesteric liquid crystals, when doped into the commercially available room-temperature achiral liquid crystal host 5CB, which also acts as a halogen-bond acceptor. The induced helical superstructure containing the molecular switch with terminal iodo atoms exhibits visible-light-driven reversible unwinding, that is, a cholesteric–nematic phase transition. Interestingly, the molecular switch with terminal bromo atoms confers reversible handedness inversion to the helical superstructure upon irradiation with visible light of different wavelengths. This visible-light-driven, reversible handedness inversion, enabled by a halogen bond donor molecular switch, is unprecedented.     

Photo/thermochromic macrocycles based on dihydroazulenes,dithienylethenes, and spiropyrans

Suitably functionalized dihydroazulenes (DHAs), dithienylethenes (DTEs), and spiropyrans (SPs) are photo-active molecules that upon irradiation undergo isomerization by ring-opening/closure reactions, which involve carbon-carbon or carbon-heteroatom bond formation/breakage. These photo-isomers may return to the original ones under light or thermal activation. Introducing molecular photoswitches into macrocyclic structures can have strong implications for the forward and backward switching properties. In this report we summarize synthetic protocols for making macrocycles based on one or more units of DHA, DTE, and SP and the resulting properties of these macrocycles.     

Taking Photochromism beyond Visible: Direct One‐Photon NIR Photoswitches Operating in the Biological Window

The success of photopharmacology is inevitably tied to the availability of photoswitches, which can be operated within the biological window (λ=650–1450 nm) to maximize penetration in tissue. A general design strategy has been devised and a dihydropyrene derivative is described here that displays negative T‐type photochromism, allowing for efficient and nearly quantitative (95 %) switching induced by NIR light λ>800 nm. The thermal half‐life of the decolored ring‐open meta‐cyclophanediene isomer ranges from minutes to hours, depending on the solvent polarity and hence serves as a probe of the local environment. Due to the rather subtle geometrical differences between the two isomers, suitably modified NIR photoswitches are potential candidates for switching when bound in the pocket of the biological target, in principle allowing for reversible light‐induced inhibitor deactivation as an alternative approach to externally regulate biological functions.