Study of the translational diffusion of the benzophenone ketyl radical in comparison with stable molecules in room temperature ionic liquids by transient grating spectroscopy

Transient grating (TG) spectroscopy has been applied to the photoinduced hydrogen-abstraction reaction of benzophenone (BP) in various kinds of room temperature ionic liquids (RTILs). After the photoexcitation of BP in RTILs, the formation of a benzophenone ketyl radical (BPK) was confirmed by the transient absorption method, and the TG signal was analyzed to determine the diffusion coefficients of BPK and BP. For comparison, diffusion coefficients of carbon monoxide (CO), diphenylacetylene (DPA), and diphenylcyclopropenone (DPCP) in various RTILs were determined by the TG method using the photodissociation reaction of DPCP. While the diffusion coefficients of the stable molecules BP, DPA, and DPCP were always larger than those predicted by the Stokes-Einstein (SE) relation in RTILs, that of BPK was much smaller than those of the stable molecules and relatively close to that predicted by the SE relation in all solvents. For the smallest molecule CO, the deviation from the SE relation was evident. The diffusion coefficients of stable molecules are better represented by a power law of the inverse of the viscosity when the exponent was less than unity. The ratios of the diffusion coefficient of BP to that of BPK were larger in RTILs (2.7-4.0) than those (1.4-2.3) in conventional organic solvents. The slow diffusion of BPK in RTILs was discussed in terms of the fluctuation of the local electric field produced by the surrounding solvent ions.     

Characterization of phosphonium ionic liquids through a linear solvation energy relationship and their use as GLC stationary phases

In recent years, room temperature ionic liquids (RTILs) have proven to be of great interest to analytical chemists. One important development is the use of RTILs as highly thermally stable GLC stationary phases. To date, nearly all of the RTIL stationary phases have been nitrogen-based (ammonium, pyrrolidinium, imidazolium, etc.). In this work, eight new monocationic and three new dicationic phosphonium-based RTILs are used as gas–liquid chromatography (GLC) stationary phases. Inverse gas chromatography (GC) analyses are used to study the solvation properties of the phosphonium RTILs through a linear solvation energy model. This model describes the multiple solvation interactions that the phosphonium RTILs can undergo and is useful in understanding their properties. In addition, the phosphonium-based stationary phases are used to separate complex analyte mixtures by GLC. Results show that the small differences in the solvent properties of the phosphonium ILs compared with ammonium-based ILs will allow for different and unique separation selectivities. Also, the phosphonium-based stationary phases tend to be more thermally stable than nitrogen-based ILs, which is an advantage in many GC applications.     

Bimolecular photoinduced electron transfer in imidazolium-based room-temperature ionic liquids is not faster than in conventional solvents

The fluorescence quenching of 3-cyanoperylene upon electron transfer from N,N-dimethylaniline in three room-temperature ionic liquids (RTILs) and in binary solvent mixtures of identical viscosity has been investigated using steady-state and time-resolved fluorescence spectroscopy. This study was stimulated by previous reports of bimolecular electron transfer reactions faster by one or several orders of magnitude in RTILs than in conventional polar solvents. These conclusions were usually based on a comparison with data obtained in low-viscous organic solvents and extrapolated to higher viscosities and not by performing experiments at similar viscosities as those of the RTILs, which we show to be essential. Our results reveal that (i) the diffusive motion of solutes in both types of solvents is comparable, (ii) the intrinsic electron transfer step is controlled by the solvent dynamics in both cases, being slower in the RTILs than in the conventional organic solvent of similar viscosity, and (iii) the previously reported reaction rates much larger than the diffusion limit at low quencher concentration in RTILs originate from a neglect of the static and transient stages of the quenching, which are dominant in solvents as viscous as RTILs.     

Evidence for laser-induced formation of solvated electrons in room temperature ionic liquids

The photolytic generation of solvated electrons was observed for the first time in two room temperature ionic liquids (RTILs), trihexyltetradecylphosphonium bis(trifluoromethylsulfonyl)imide (IL) and 1-butyl-1-methyl-pyrrolidinium bis(trifluoromethylsulfonyl)imide (IL). A 70 fs UV-pulse was used to excite the RTILs, while the transient response was monitored in the visible and near-infrared spectral regions. Immediately after excitation, a pulse duration limited rise of the induced absorption indicated the formation of solvated electrons suggesting the existence of pre-formed traps in RTILs. A broad transient absorption spectrum with a full width at half maximum of about 0.9 eV, typical for solvated electrons, was reconstructed from the transient profiles. Wavelength-independent relaxation dynamics at longer delay times suggest a lifetime of solvated electrons in the ns regime in agreement with results from pulse radiolysis studies. Adding 1,1-dimethylpyrrolidinium iodide to IL led to an increase of the UV absorbance and consequently, to an increase of the yield of solvated electrons. Furthermore, this solute is an efficient electron scavenger causing the transients to decay within about 40 ps.     

How ionic are room-temperature ionic liquids? An indicator of the physicochemical properties

Room-temperature ionic liquids (RTILs) are liquids consisting entirely of ions, and their important properties, e.g., negligible vapor pressure, are considered to result from the ionic nature. However, we do not know how ionic the RTILs are. The ionic nature of the RTILs is defined in this study as the molar conductivity ratio (Lambda(imp)/Lambda(NMR)), calculated from the molar conductivity measured by the electrochemical impedance method (Lambda(imp)) and that estimated by use of pulse-field-gradient spin-echo NMR ionic self-diffusion coefficients and the Nernst-Einstein relation (Lambda(NMR)). This ratio is compared with solvatochromic polarity scales: anionic donor ability (Lewis basicity), E(T)(30), hydrogen bond donor acidity (alpha), and dipolarity/polarizability (pi), as well as NMR chemical shifts. The Lambda(imp)/Lambda(NMR) well illustrates the degree of cation-anion aggregation in the RTILs at equilibrium, which can be explained by the effects of anionic donor and cationic acceptor abilities for the RTILs having different anionic and cationic backbone structures with fixed counterparts, and by the inductive and dispersive forces for the various alkyl chain lengths in the cations. As a measure of the electrostatic interaction of the RTILs, the effective ionic concentration (C(eff)), which is a dominant parameter for the electrostatic forces of the RTILs, was introduced as the product of Lambda(imp)/Lambda(NMR) and the molar concentration and was compared with some physical properties, such as reported normal boiling points and distillation rates, glass transition temperature, and viscosity. A decrease in C(eff) of the RTILs is well correlated with the normal boiling point and distillation rate, whereas the liquid-state dynamics is controlled by a subtle balance between the electrostatic and other intermolecular forces.     

Characterizing ionic liquids on the basis of multiple solvation interactions

Room-temperature ionic liquids (RTILs) are useful in many chemical applications. Recent publications have attempted to determine the polarity of RTILs using empirical solvent polarity scales. The results have indicated that most RTILs have similar polarities. Nevertheless, RTILs are capable of behaving quite differently when used as solvents in organic synthesis, matrixes in matrix-assisted laser desorption/ionization (MALDI) mass spectrometry, liquid-liquid extraction, and as stationary phases in gas chromatography. The work presented in this study uses a linear free energy approach to characterize 17 RTILs on the basis of their distinct multiple solvation interactions with probe solute molecules. This model provides data that can be used to help identify the interactions and properties that are important for specific chemical applications.     

Dynamic stokes shift and excitation wavelength dependent fluorescence of dipolar molecules in room temperature ionic liquids

Room temperature ionic liquids (RTILs) are viscous media consisting entirely of ions. Because of the complex nature of various interactions in these media, the solvent properties of the RTILs are very little understood. Since the fluorescence response of molecules comprising conjugated electron donor and acceptor groups, referred to as dipolar molecules, is one of the most frequently exploited sources of information on complex media, whose properties are largely unknown, it is possible to obtain insight into the structure and dynamics of the RTILs by studying the fluorescence behavior of dipolar solutes in these complex media. The most commonly exploited utility of a fluorescent dipolar system is in the estimation of the polarity of the media from its steady state fluorescence response. While several dipolar systems do provide estimates of the polarity of various RTILs, there can be circumstances when the steady state emission frequency of a dipolar system may not truly reflect the equilibrium solvation energy and, hence, the polarity of the medium. The fluorescence response of a dipolar system can be dependent on the excitation wavelength, an observation not commonly encountered in conventional solvents of similar polarities. On the other hand, the time-resolved fluorescence behavior of a dipolar solute in polar medium is one of the primary sources of information on the time-scale of reorganization of the solvent molecules around the photoexcited species. As the RTILs are sufficiently polar media, the time-dependent fluorescence data of the dipolar systems provide insight into the dynamics and mechanism of solvation in these media, which differ considerably from the conventional solvents. These aspects have been discussed taking into consideration the inherent absorption and fluorescence behavior of the imidazolium ionic liquids.     

Molecular simulation study of dynamical properties of room temperature ionic liquids with carbon pieces

Room temperature ionic liquids (RTILs) with dispersed carbon pieces exhibit distinctive physiochemical properties. To explore the molecular mechanism, RTILs/carbon pieces mixture was investigated by molecular dynamics (MD) simulation in this work. Rigid and flexible carbon pieces in the form of graphene with different thicknesses and carbon nanotubes in different sizes were dispersed in a representative RTIL 1-butyl-3-methyl-imidazolium dicyanamide ([Bmim][DCA]). This study demonstrated that the diffusion coefficients of RTILs in the presence of flexible carbons are similar to those of bulk RTILs at varying temperatures, which is in contrast to the decreased diffusion of RTILs in the presence of rigid carbons. In addition, interfacial ion number density at rigid carbon surfaces was higher than that at flexible ones, which is correlated with the accessible external surface area of carbon pieces. The life time of cation-anion pair in the presence of carbon pieces also exhibited a dependence on carbon flexibility. RTILs with dispersed rigid carbon pieces showed longer ion pair life time than those with flexible ones, in consistence with the observation in diffusion coefficients. This work highlights the necessity of including the carbon flexibility when performing MD simulation of RTILs in the presence of dispersed carbon pieces in order to obtain the reliable dynamical and interfacial structural properties.     

Photoinduced axial ligation and deligation dynamics of nonplanar nickel dodecaarylporphyrins

The ground- and excited-state metal-ligand dynamics of nonplanar nickel(II) 2,3,5,7,8,10,12,13,15,17,18,20-dodecaphenylporphyrin (NiDPP) and two fluorinated analogues (NiF(20)DPP and NiF(28)DPP) have been investigated using static and time-resolved absorption spectroscopy in toluene and in ligating media that differ in basicity, aromaticity, and steric encumbrance. Because of the electronic and steric consequences of nonplanarity, NiDPP does not bind axial ligands in the ground state, but metal coordination does occur after photoexcitation with multistep dynamics that depend on the properties of the ligand. Following the structural relaxations that occur in all nickel porphyrins within approximately 10 ps, ligand binding to photoexcited NiDPP is progressively longer in pyridine, piperidine, and 3,5-lutidine (25-100 ps) but does not occur at all in 2,6-lutidine in which the ligating nitrogen is sterically encumbered. The transient intermediate that is formed, which nominally could be either a five- or six-coordinate species, also has a ligand-dependent lifetime (200-550 ps). Decay of this intermediate occurs partially via ligand release to re-form the uncoordinated species, in competition with binding of the second axial ligand and/or conformational/electronic relaxations (of a six-coordinate intermediate) to give the ground state of the bis-ligated photoproduct. The finding that the photoproduct channel principally depends on ligand characteristics along with the time-evolving spectra suggests that the transient intermediate may involve a five-coordinate species. In contrast to NiDPP, the fluorinated analogues NiF(20)DPP and NiF(28)DPP do coordinate axial ligands in the ground state but eject them after photoexcitation. Collectively, these results demonstrate the sensitivity with which the electronic and structural characteristics of the macrocycle, substituents, and solvent (ligands) can govern the photophysical and photochemical properties of nonplanar porphyrins and open new avenues for exploring photoinduced ligand association and dissociation behavior.     

Polarizability versus mobility: atomistic force field for ionic liquids

Based on classical molecular dynamics simulations, we discuss the impact of Coulombic interactions on a comprehensive set of properties of room temperature ionic liquids (RTILs) containing 1,3-dimethylimidazolium (MMIM(+)), N-butylpyridinium (BPY(+)), and bis(trifluoromethane sulfonyl)imide (TFSI(-)) ions. Ionic transport is found to be noticeably hindered by the excessive Coulombic energy, originating from the neglect of electronic polarization in the condensed phase of these RTILs. Starting from the models, recently suggested by Lopes and Padua, we show that realistic ionic dynamics can be achieved by the uniform scaling of electrostatic charges on all interaction sites. The original model systematically overestimates density and heat of vaporization of RTILs. Since density linearly depends on charge scaling, it is possible to use it as a convenient beacon to promptly derive a correct scaling factor. Based on the simulations of [BPY][TFSI] and [MMIM][TFSI] over a wide temperature range, we conclude that the suggested technique is feasible to greatly improve quality of the already existing non-polarizable FFs for RTILs.     

室温离子液体的分子动力学模拟

室温离子液体作为一种新型的反应介质正在受到人们的关注,近十年来成为了化学领域的研究热点。随着人们对离子液体结构与性质研究的不断深入和计算方法的快速发展,分子模拟已是研究离子液体的结构和性质的有力工具。本文介绍了分子动力学(molecular dynamics,MD)的基本原理,分子力场的种类,以及离子液体分子动力学模拟一般采用的AMBER、OPLS和CHARMM三种力场的构建形式。综述了近年来纯组分离子液体、混合组分离子液体分子动力学模拟方法研究取得的成果和最新进展,并分析了主要存在的问题。展望了离子液体分子动力学模拟的研究方向和前景,同时还提出了包含极化作用和静电远程作用的离子液体分子动力学模拟研究的基本思路。     

Room Temperature Ionic Liquid Carbon Nanotube Paste Electrodes: Overcoming Large Capacitive Currents Using Rotating Disk Electrodes

The voltammetric response of graphite or carbon nanotube paste electrodes, which incorporate the room temperature ionic liquid, N‐butyl‐N‐methyl pyrrolidinium bis(trifluoromethylsulfonyl) imide or [C₄mpyrr][NTf₂], (RTIL‐CNTPE and RTIL‐CPE respectively) as the binder, towards anionic, cationic and neutral redox probes is examined and compared to conventional paste electrodes which use mineral oil as the binder. The RTIL paste electrodes are found to suffer from very large background currents due to capacitive charging. This is exacerbated further when CNTs are combined with RTILs in the paste. The large charging currents obscure any Faradaic processes of interest, especially at low analyte concentrations. By employing steady state voltammetry at a rotating disk electrode made of the RTIL pastes this problem can be overcome. This allows the electroanalytical properties of these interesting electrode substrates, which combine the attractive properties of CNTs with RTILs to be further explored and developed.     

Transport properties of room-temperature ionic liquids from classical molecular dynamics

Room-temperature ionic liquids (RTILs) have attracted much attention in the scientific community in the past decade due their novel and highly customizable properties. Nonetheless, their high viscosities pose serious limitations to the use of RTILs in practical applications. To elucidate some of the physical aspects behind transport properties of RTILs, extensive classical molecular dynamics calculations are reported. Here, in particular, bulk viscosities and ionic conductivities of butyl-methyl-imidazole based RTILs are presented over a wide range of temperatures. The dependence of the properties of the liquids on simulation parameters, e.g., system-size effects or the choice of the interaction potential, is analyzed in detail.     

Interactions between spiropyrans and room-temperature ionic liquids: photochromism and solvatochromism

A series of imidazolium-based room-temperature ionic liquids (RTILs) containing anions from organic carboxylic acids were prepared. A set of dye probes, including Reichardt's dye (30), 4-nitrioaniline, and N, N-diethyl-4-nitroaniline, were used to determine the ET(30) scales and the Kamlet-Taft parameters (pi*, alpha, and beta) of the RTILs. On the basis of the polarity properties, these RTILs were categorized into three groups: group A with beta >0.9, alpha <0.9; group B with beta <0.9, alpha <0.9; and group C with beta <0.9, alpha >0.9. Interactions of these RTILs with four photochromic spiropyran derivatives (SP-I, SP-II, SP-III, and SP-IV) were investigated. It was found that the spiropyrans could present photochromism (positive or negative) or not, depending mainly on the polarity properties of the RTILs and also on the structure itself. A new spectroscopic method based on the molecular transition energy of the spiropyran probes (ESP) was proposed to determine the polarity of those protic or fluorine-containing RTILs, which were failed with the Reichardt's dye (30) probe.     

Ionic liquids in vacuo; solution-phase X-ray photoelectron spectroscopy

The in situ monitoring of catalysis in Room Temperature Ionic Liquids (RTILs) is fundamental to the understanding of catalytic processes and the role of RTILs in catalytic turnover; we describe how XPS can be used to give information on both pure RTILs and catalytically-active RTIL-based solutions.     

New innovations in ionic liquid–based miniaturised amperometric gas sensors

Gas detection is an essential part of everyday life; for some applications, using sensors for toxic and hazardous gases can literally mean the difference between life and death. In this minireview, recent progress in amperometric gas sensing using miniaturised electrodes and devices is described. The focus is on the use of nonvolatile room-temperature ionic liquids (RTILs) as electrolytes, which possess inherent advantages such as wide electrochemical windows, high thermal and chemical stability, intrinsic conductivity and good solvating properties. Various different gases, electrodes and RTILs have been investigated in the strive towards new materials for improved gas sensors. The most recent developments using porous membrane electrodes, planar devices (e.g. screen-printed, thin-film, microarray and interdigitated electrodes) and the modification of these surfaces for improved sensitivity are described. RTILs have great potential to be used as electrolytes in amperometric gas sensors, with improved lifespan of the sensor in hot/dry environments and allowing miniaturisation of devices. However, it is clear that more understanding of their long-term operation and utility in real environments (e.g. background air, varying temperatures and humidity levels) is needed before their realisation in successful commercial devices.     

Size-controllable gold-platinum alloy nanoparticles on nine functionalized ionic-liquid surfaces and their application as electrocatalysts for hydrogen peroxide reduction

A series of room-temperature ionic liquids (RTILs) containing different functional groups such as hydroxyl, nitrile, carboxyl, and thiol attached to imidazolium cations, combined with various anions such as chloride [Cl], tetrafluoroborate [BF(4)], hexafluorophosphate [PF(6)], and bis[(trifluoromethyl)sulfonyl]imide [Tf(2)N], have been successfully synthesized. Dissolved in chitosan (Chi), the Chi/RTIL composites can be employed as flexible templates for the preparation of Au/Pt nanostructures. These Au/Pt nanostructures can be facilely deposited in situ on the surface of Chi/RTILs through electrodeposition. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) results demonstrate that the alloy size is significantly dependent on the structure of the Chi/RTILs, with sizes ranging from 2.8 to 84.7 nm. Based upon the functionalized RTILs, nine Chi/RTIL-Au/Pt biosensors have been fabricated. First, the size-dependent electrochemistry of Chi/RTIL-Au/Pt was investigated using potassium ferricyanide as the probe. The reversible electron transfer of the Fe(CN)(6)(3-/4-) redox couple was realized for the nine biosensors, and the peak currents, as well as the peak-to-peak separations (ΔE(p)) and electron-transfer rates, differ greatly from each other because of the diversity of the RTILs. Further electrochemical research reveals that the functional groups of these RTILs exert an evident influence on the reduction behavior of H(2)O(2), which in turn illustrates that the electrocatalytic activity of Chi/RTIL-Au/Pt nanocomposites can be tuned by means of employing RTILs with different functional groups, and an appropriate combination of cations and anions may produce a higher activity. The facilitated electron transfer and the intrinsic catalytic activity of Au/Pt NPs provide a facile way to construct a third-generation H(2)O(2) biosensor with a high sensitivity, low detection limit, quick response time, and excellent selectivity.     

Hydrodynamic interpretation on the rotational diffusion of peroxylamine disulfonate solute dissolved in room temperature ionic liquids as studied by electron paramagnetic resonance spectroscopy

Rotational motion of a nitroxide radical, peroxylamine disulfonate (PADS), dissolved in room temperature ionic liquids (RTILs) was studied by analyzing electron paramagnetic resonance spectra of PADS in various RTILs. We determined physical properties of PADS such as the hyperfine coupling constant (A), the temperature dependence of anisotropic rotational correlation times (τ(∥) and τ(⊥)), and rotational anisotropy (N). We observed that the A values remain unchanged for various RTILs, which indicates negligible interaction between the N-O PADS group and the cation of RTIL. Large N values suggest strong interaction of the negative sulfonyl parts of PADS with the cations of RTILs. Most of the τ(∥), τ(⊥), and (τ(∥)τ(⊥))(1/2) values are within the range calculated on the basis of a hydrodynamic theory with stick and slip boundary conditions. It was deduced that this theory could not adequately explain the measured results in some RTILs with smaller BF(4) and PF(6) anions.     

A "counter-charge layer in generalized solvents" framework for electrical double layers in neat and hybrid ionic liquid electrolytes

Room-temperature ionic liquids (RTILs) have received significant attention as electrolytes due to a number of attractive properties such as their wide electrochemical windows. Since electrical double layers (EDLs) are the cornerstone for the applications of RTILs in electrochemical systems such as supercapacitors, it is important to develop an understanding of the structure-capacitance relationships for the EDLs of these systems. Here we present a theoretical framework termed "counter-charge layer in generalized solvents" (CGS) for describing the structure and capacitance of the EDLs in neat RTILs and in RTILs mixed with different mass fractions of organic solvents. Within this framework, an EDL is made up of a counter-charge layer exactly balancing the electrode charge, and of polarized generalized solvents (in the form of layers of ion pairs, each of which has a zero net charge but has a dipole moment--the ion pairs thus can be considered as a generalized solvent) consisting of all RTILs inside the system except the counter-ions in the counter-charge layer, together with solvent molecules if present. Several key features of the EDLs that originate from the strong ion-ion correlation in RTILs, e.g., overscreening of electrode charge and alternating layering of counter-ions and co-ions, are explicitly incorporated into this framework. We show that the dielectric screening in EDLs is governed predominantly by the polarization of generalized solvents (or ion pairs) in the EDL, and the capacitance of an EDL can be related to its microstructure with few a priori assumptions or simplifications. We use this framework to understand two interesting phenomena observed in molecular dynamics simulations of EDLs in a neat IL of 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF(4)]) and in a mixture of [BMIM][BF(4)] and acetonitrile (ACN): (1) the capacitance of the EDLs in the [BMIM][BF(4)]/ACN mixture increases only slightly when the mass fraction of ACN in the mixture increases from zero to 50% although the dielectric constant of bulk ACN is more than two times higher than that of neat [BMIM][BF(4)]; (2) the capacitance of EDLs near negative electrodes (with BMIM(+) ion as the counter-ion) is smaller than that near positive electrodes (with BF(4)(-) as the counter-ion) although the closest approaches of both ions to the electrode surface are nearly identical.     

Novel imidazolium chiral ionic liquids that contain a urea functionality

Nine chiral room temperature ionic liquids (RTILs), which contain a chiral moiety and a urea functionality bonded to a imidazolium ring, have been designed and synthesized. The synthesis of these ionic liquids is concise and practical due to the commercial availability of the starting materials. These novel RTILs were readily prepared from 1-(3-aminopropyl)imidazole and amino acid ester derived isocyanates. We envision that these new chiral RTILs can serve as effective reaction media as well as chiral catalysts, which are presently being investigated in our laboratory.