Highly renewable,thermoplastic tetrapolyesters based on hydroquinone,p‐hydroxybenzoic acid or its derivatives,phloretic acid,and dodecanedioic acid

A series of tetrapolyesters were obtained by polymerizing phloretic acid, hydroquinone, p‐hydroxybenzoic acid, or its derivatives, that is, vanillic acid or syringic acid, and dodecanedioic acid. Each monomer was polymerized in its acetylated form, except for the diacid to undergo polymerization by acidolysis. Initial polymerizations had shown that the use of phloretic acid resulted in better polymer properties than with p‐coumaric acid. The predominantly renewable polymers were obtained by melt polymerization using a two‐stage condensation process whereby antimony(III) oxide was applied as catalyst. Monomer conversions were typically close to 90%. ¹H and ¹³C NMR, DSC, TGA, solution viscometry, and GPC were applied, as well as polarized microscopy to determine polymer microstructure and composition, transition temperatures, decomposition temperatures, intrinsic viscosities, and other molecular weight properties, and when applicable the liquid crystalline behavior of the polymers. All peaks, including end group peaks in the ¹³C NMR spectra were assigned, the monomer sequence distribution was verified to be random, and a complete dyad analysis involving nine dyads and eight peaks was performed. By using p‐hydroxybenzoic acid and its derivatives without any, one or two methoxy groups and varying the copolymer compositions, melting temperatures could be tuned between 106 and 181 °C. The tetrapolyesters, which included residues of p‐hydroxybenzoic acid, formed nematic liquid crystals. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1498–1507     

Renewable benzoxazine monomer from Vanillin: Synthesis,characterization, and studies on curing behavior

A novel renewable based benzoxazine, 3‐(furan‐2‐ylmethyl)?8‐methoxy‐3,4‐dihydro‐2H‐1,3‐benzoxazine‐6‐formyl (Va‐Bz), has been synthesized from a lignin derived chemical “vanillin” without solvents. Poly (Va‐Bz) has high Tg and excellent thermal and adhesive properties. A mechanism of cross‐linking, due to electrophilic substitution at furan and decarboxylation of carboxylic group of benzene ring, is suggested. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 7–11     

Renewable benzoxazine monomers from “lignin‐like” naturally occurring phenolic derivatives

The benzoxazines of three naturally occurring phenylpropanoid phenols: ferulic, coumaric, and phloretic acids, and their esters are described. Benzoxazines with conjugated unsaturated chains exhibit unusual poor thermal stability and degrade partially at the polymerization temperature making necessary the use of a catalyst (BF₃.Et₂O) to low the polymerization temperature and prevent degradation. Polybenzoxazines are prepared thermally and characterized by DSC and TGA techniques. The resulting materials have superior Tgs when compared with those prepared from an unsubstituted monofuctional benzoxazine due to the additional crosslinking through the ester and carboxylic moieties. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4894–4903     

Studies on the thermal polymerization of substituted benzoxazine monomers: Electronic effects

To evaluate the influence of the electronic effects on the polymerization temperature, we looked at several 3‐phenyl‐3,4‐dihydro‐2‐H‐1,3‐benzoxazine monomers with electron‐withdrawing or electron‐donating groups in the 6 and 4′ positions. The monomers were synthesized and characterized using different synthetic methods to achieve the best possible results. The thermal polymerization of these benzoxazine monomers was analyzed by differential scanning calorimetry, and the polymerization behavior and the polymer characteristics were related to the electronic character of the substituent and the polymerization mechanism. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3353–3366, 2008     

Polymerization kinetics and volume relaxation behavior of photopolymerized multifunctional monomers producing highly crosslinked networks

Multifunctional monomers (trimethylol propane trimethacrylate, trimethylol propane triacrylate, pentaerythritol tetraacrylate, and dipentaerythritol monohydroxy pentaacrylate) were photopolymerized with 2,2-dimethoxy-2-phenylacetophenone as the photoinitiator to produce highly crosslinked networks. The volume shrinkage behavior and the reaction kinetics were studied under various reaction conditions. The volume shrinkage and maximum functional group conversion were dependent on the number of functional groups, type of functional group, and the curing conditions. The maximum functional group conversion was also dependent on the reaction temperature. All the polymerized systems exhibited a strong coupling between the volume relaxation and the reaction kinetics. The kinetic constants were also determined as a function of conversion, and the termination mechanism was found to be reaction diffusion dominated even at low conversions. The importance of these results on the prediction of the reaction behavior for multifunctional monomers producing highly crosslinked polymers is discussed. © 1994 John Wiley & Sons, Inc.     

The synthesis and cationic polymerization of multifunctional silicon-containing epoxy monomers and oligomers

Several series of multifunctional silicon-containing epoxide monomers and oligomers have been prepared using rhodium catalyzed hydrosilation reactions. Dialkyl and diarylsilanes can be condensed with vinyl epoxides to give high yields of the desired diepoxides while the hydrosilation of alkyl and aryl silanes yields a mixture of di and tri epoxy substituted products. The condensation of αω,? Si? H difunctional compounds with vinyl epoxides can be carried out regioselectively to give α-hydrogen-ω-epoxy intermediates, which can be further reacted with di and tri olefins bearing terminal double bonds to give a series of well characterized epoxy functional oligomers. An investigation of the photoinitiated cationic polymerization of the monomers and oligomers, which were prepared during the course of these studies, was carried out. © 1994 John Wiley & Sons, Inc.     

Novel photocurable multifunctional acrylate monomers containing perfluorinated aromatic units and their copolymers for photonic applications

We designed and synthesized novel UV‐curable multifunctional acrylate monomers with perfluorinated aromatic units and their copolymers. The UV‐curable multifunctional acrylate monomers with perfluorinated aromatic units were synthesized as follows. Perfluorinated aromatic methylmethane derivatives were prepared through the reaction of pentaerythritol with hexafluorobenzene and decafluorobiphenyl in the presence of sodium hydride. They were sequentially substituted with 2,2,3,3,4,4,5,5‐octafluoro‐6‐(tetrahydropyran‐2‐yloxy)‐hexan‐1‐ol, and this yielded hydroxy‐functional compounds after tetrahydropyran deprotection. Finally, the reaction of the resultant hydroxy compounds with acryloyl chloride generated the perfluorinated multifunctional acrylate monomers in high yields of greater than 85%. The novel photocrosslinked and perfluorinated copolyacrylates, obtained after the UV and thermal curing of these monomers, satisfied the material requirements for photonic devices. Most of these copolymers were thermally stable over 370 °C, and their glass‐transition temperatures were not detected because of their highly crosslinked nature. The refractive indices of the copolymers ranged from 1.410 to 1.441. The refractive indices of the photocrosslinked and perfluorinated copolyacrylates were easily tuned by the variation of the copolymer composition. Some of these copolymers exhibited a birefringence of less than 0.0003. This was much lower than the birefringence of fluorinated polyacrylate‐based materials. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6375–6383, 2004     

Tailor‐made and chemically designed synthesis of coumarin‐containing benzoxazines and their reactivity study toward their thermosets

Coumarins are used as a natural renewable resource to synthesize coumarin‐containing benzoxazine resins. The coumarin‐containing benzoxazines are fully characterized in terms of their chemical structure by Fourier‐transform infrared spectroscopy and proton nuclear magnetic resonance spectroscopy. The influence of electronic effects caused by the substituents on the polymerization temperature is also evaluated. Thermal properties of the resulting thermosets are characterized by differential scanning calorimetry and thermogravimetric analysis, showing good stability and char yields higher than 50%. The coumarin‐containing polybenzoxazine thermosets show T_g values in the range between 160 and 190 °C. Thus, the herein presented coumarin‐containing benzoxazine resins are proven to be competitive monomers when compared with other petroleum‐based benzoxazine resins toward the generation of high‐performance thermoset. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1428‐1435     

The synthesis and cationic photopolymerization of monomers based on dicyclopentadiene

Several new epoxide monomers based on dicyclopentadiene (DCPD) were prepared using straightforward reaction chemistry. Those monomer-bearing groups in addition to the epoxy moiety, which can stabilize free radicals, display a pronounced acceleration of the rate of cationic ring-opening polymerization in the presence of diaryliodonium salt photoinitiators. Mechanistic studies conducted with the aid of model compounds have shown that the apparent rate acceleration is due to the free radical chain-induced decomposition of the photoinitiator. One of the chain carriers in this reaction involves a monomer-derived free radical. Also prepared was dicyclopentadiene monomer (V) bearing polymerizable epoxide and 1-propenyl ether groups in the same molecule. The functional groups in V appear to undergo independent vinyl and epoxide ring-opening polymerization. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3427–3440, 1999     

多功能氨基酸衍生物钝化的高性能钙钛矿太阳能电池

采用含有羧基、氨基和苯基等多官能团的氨基酸衍生物分子(Fmoc-L-异亮氨酸,Fmoc-Ile-OH)钝化钙钛矿薄膜表面缺陷。首先,该氨基酸衍生物可降低钙钛矿薄膜中PbI₂杂质含量,并提高钙钛矿薄膜的颗粒尺寸。其次,氨基酸衍生物的引入可有效改善钙钛矿薄膜的光学特性和钙钛矿/电荷传输层界面载流子输运性能。另外,经钝化处理的钙钛矿太阳能电池表现出更优的器件二极管理想因子、更低的陷阱填充极限电压和更高的载流子复合电阻,这些结果证实了Fmoc-Ile-OH可有效钝化钙钛矿薄膜表面缺陷。最后,通过工艺条件优化,制得了转化效率为21.09%的高效钙钛矿太阳能电池器件,其性能远优于对照组器件的效率(18.00%)。     

From fatty acid and lactone biobased monomers toward fully renewable polymer latexes

Novel waterborne polymeric materials based on renewable resource monomers have been prepared by the environmentally friendly miniemulsion polymerization of an oleic acid‐derivative monomer (MOA) and the α‐methylene‐γ‐butyrolactone (α‐MBL). The effect of the incorporation of different amounts of α‐MBL on kinetics and polymer microstructure is investigated. The estimation of the monomer reactivity ratios (r_α‐MBL = 0.49 and r_MOA = 1.26) shows the slight lower reactivity of the α‐MBL, resulting in a random copolymer moderately enriched with MOA at the beginning of the reaction. The thermal and mechanical properties of the polymers demonstrate that by incorporating the lactone it is possible to produce copolymers in a broad range of glass transition temperatures, with high thermal stability and improved mechanical properties. This study provides a new green route toward the bio‐sourced preparation of polymer latexes with tuneable properties, which can range from coatings to adhesives. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3543–3549     

Oxidation-resistant thermosets derived from thermal copolymerization of acetylenic monomers containing boron and silicon

Polymerization of acetylenic monomers containing silicon and boron produces materials that are resistant to oxidation at elevated temperature. In addition to homopolymerization, these inorganic–organic hybrid monomers can be copolymerized with an otherwise all carbon containing system. Inorganic elements incorporated by this method enhance the thermooxidative stability of the copolymer. This stability is a function of the amount of boron in the final product. We show that a thermoset containing an initial 5% by weight of boron can be charred to a material that when heated in air at 1000 °C loses less than 10% of its mass. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 4356–4359, 1999     

Synthesis of phosphorus‐containing vinyl ether monomers and oligomers and their photoinitiated polymerization

Divinyl ether monomers containing phosphorous residues were synthesized by the addition reaction of glycidyl vinyl ether (GVE) with various phosphonic dichlorides or dichlorophosphates with quaternary onium salts as catalysts. The reaction of GVE with phenylphosphonic dichloride gave bis[1‐(chloromethyl)‐2‐(vinyloxy)ethyl]phenylphosphonate ( 1a ) in a 77% yield. The polycondensation of 1a with terephthalic acid was also carried out with 1,8‐diazabicyclo[5.4.0]undecene‐7 (DBU) as a condensing agent to afford the corresponding phosphorus‐containing polyester. A multifunctional monomer containing both vinyl ether groups and methacrylate groups was prepared by the reaction of 1a with methacrylic acid with DBU. The photoinitiated cationic polymerization of these vinyl ether compounds proceeded rapidly with bis[4‐(diphenylsulfonio)phenyl]sulfide‐bishexafluorophosphate as the cationic photoinitiator without a solvent upon ultraviolet irradiation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2031–2042, 2004     

Regioselective hydrosilations. III. The synthesis and polymerization of ambifunctional silicon-containing epoxy monomers

Silicon-containing epoxide compounds bearing Si ? H groups can be readily prepared in high yields by the regioselective rhodium-catalyzed monohydrosilation of α,ω-dihydrogen functional siloxanes and silanes with vinyl epoxides. The remaining Si ? H groups in these compounds can be further selectively hydrosilated with unsaturated epoxides to give a series of unique ambifunctional monomers containing two different epoxide groups in the same molecule. The photopolymerization of these monomers has been studied using analytical techniques including real time infrared spectroscopy and differential scanning photocalorimetry. On photopolymerization, the new monomers yield interesting networks. © 1993 John Wiley & Sons, Inc.     

The synthesis and characterization of metal-containing vinylic monomers of iron and tungsten

A series of metal-containing vinylic monomers of the type L_nM(COC₆H₄CH=CH₂) and L_nM (COCH=CHC₆H₅) [L_nM = (η⁵-C₅H₅)Fe(CO)₂, (η⁵-C₅Me₅)Fe(CO)₂ and (η⁵-C₅H₅)W(CO)₃] were prepared by the reaction of the appropriate metal anion with either 4-vinylbenzoyl chloride or cinnamoyl chloride. (η⁵-C₅H₅)(CO)₂FeCOCH=CH₂ was prepared by the reaction of Na[(η⁵-C₅H₅)Fe(CO)₂] and acryloyl chloride, whereas the compound (η⁵-C₅H₅)(CO)₂Fe(C₆H₄CH=CH₂) was prepared via a transmetallation reaction using a palladium catalyst. All compounds were fully characterized using FTIR, ¹H and ¹³C NMR spectroscopy and mass spectrometry. Copyright © 1998 John Wiley & Sons, Ltd.     

Biodegradable polymers based on renewable resources. IX. Synthesis and degradation behavior of polycarbonates based on 1,4:3,6‐dianhydrohexitols and tartaric acid derivatives with pendant functional groups

Novel polycarbonates, with pendant functional groups, based on 1,4:3,6‐dianhydrohexitols and L ‐tartaric acid derivatives were synthesized. Solution polycondensations of 1,4:3,6‐dianhydro‐bis‐O‐(p‐nitrophenoxycarbonyl)hexitols and 2,3‐di‐O‐methyl‐L ‐threitol or 2,3‐O‐isopropylidene‐L ‐threitol afforded polycarbonates having pendant methoxy or isopropylidene groups, respectively, with number average molecular weight (M_n) values up to 3.6₁ × 10⁴. Subsequent acid‐catalyzed deprotection of isopropylidene groups gave well‐defined polycarbonates having pendant hydroxyl groups regularly distributed along the polymer chain. Differential scanning calorimetry (DSC) demonstrated that all the polycarbonates were amorphous with glass transition temperatures ranging from 57 to 98 °C. Degradability of the polycarbonates was assessed by hydrolysis test in phosphate buffer solution at 37 °C and by biochemical oxygen demand (BOD) measurements in an activated sludge at 25 °C. In both tests, the polycarbonates with pendant hydroxyl groups were degraded much faster than the polycarbonates with pendant methoxy and isopropylidene groups. It is noteworthy that degradation of the polycarbonates with pendant hydroxyl groups was remarkably fast. They were completely degraded within only 150 min in a phosphate buffer solution and their BOD‐biodegradability reached nearly 70% in an activated sludge after 28 days. The degradation behavior of the polycarbonates is discussed in terms of their chemical and physical properties. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3909–3919, 2005     

Regioselective hydrosilations. IV. The synthesis and polymerization of monomers containing epoxy and alkoxysilane groups

Using rhodium and platinum catalyzed regioselective hydrosilation, a series of α-hydrogen-ω-epoxy silane and siloxane compounds have been prepared in good yields. These intermediates have been further condensed with vinyltrimethoxysilane in subsequent hydrosilation reactions to prepare an interesting new class of ambifunctional monomers containing both epoxy and trimethoxysilane groups. It was further shown that these same compounds could be synthesized by a simplified “one-pot” two-step procedure. An investigation of the simultaneous cationic ring-opening polymerization of the epoxy groups and the acid-catalyzed condensation of the trimethoxysilyl groups was carried out. © 1993 John Wiley & Sons, Inc.     

Design and synthesis of highly reactive photopolymerizable epoxy monomers

The synthesis of a series of novel cationically photopolymerizable epoxide monomers bearing benzyl, allyl, and propargyl acetal and ether groups that can stabilize free radicals was carried out. These monomers display enhanced reactivity in cationic photopolymerization in the presence of certain onium salt photoinitiators. Specifically, this article describes schemes for the synthesis of cycloaliphatic epoxy monomers bearing free‐radical stabilizing groups. During UV irradiation of an onium salt cationic photoinitiator, the aryl radicals that are generated abstract labile protons present in such monomers to generate the corresponding carbon‐centered radicals. Subsequently, these radicals can interact with the onium salt by a redox mechanism to induce the decomposition of these salts. The overall result is that additional cationic species are generated by this mechanism that increase the rate and extent of the cationic ring‐opening polymerization of the epoxide monomer. An investigation of the photopolymerizations of the monomers prepared during this work was carried out using Fourier transform real‐time infrared spectroscopy, and conclusions were drawn with respect to the relationship between their structures and reactivity. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2385–2395, 2001     

Preparation and characterization of porous polymeric microspheres obtained from multifunctional methacrylate monomers

Synthesis and properties of the new difunctional methacrylate monomer 2‐hydroxy‐3‐methacryloyloxypropoxybenzene are presented. This monomer was applied for the synthesis of porous microspheres. It was copolymerized with trimethylolpropane trimethacrylate in the presence of two pairs of pore‐forming diluents dodecane and toluene, and n‐decanol and toluene. Influence of diluents composition on their porous structures was studied. Thermal resistance and tendency to swell in different organic diluents for a chosen sample were also determined. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6165–6174, 2008