混合胶束中Gemini阳离子表面活性剂14-s-14与常规表面活性剂的协同作用:连接臂及反离子效应(英文)

The mixed micelle formation of binary cationic 14-s-14 gemini with conventional single chain surfactants was studied by conductivity measurements.The critical micelle concentration(cmc) and the degree of counterion binding values(g) of the binary systems were determined.The results were analyzed by applying regular solution theory(RST) to calculate micellar compositions(X),activity coefficients(f1,f2),and the interaction parameters(β).The synergistic interactions of all the investigated cationic gemini+conventional surfactant combinations were found to be dependent upon the length of hydrophobic spacer of the gemini surfactant.The excess Gibbs free energy of mixing was evaluated,and it indicated relatively more stable mixed micelles for the binary combinations.     

Characteristics of aggregation in aqueous solutions of dialkylpyrrolidinium bromides

Three pyrrolidinium-based ionic liquids-N-dodecyl-N-methylpyrrolidinium bromide, N-butyl-N-octylpyrrolidinium bromide, and N-butyl-N-dodecylpyrrolodinium bromide-were synthesized and characterized by their decomposition temperatures (T(d)) measured by thermogravimetric analysis, and by their melting point (T(m)), glass transition (T(g)) and crystallization temperatures (T(cryst)) determined by differential scanning calorimetry. Their self-aggregation properties in aqueous solution were studied and their behavior is compared with that of analogous conventional cationic surfactants, namely tetra-alkylammonium bromide salts. The critical micellar concentration, cmcs were obtained by isothermal titration calorimetry (ITC); which were further validated by measurements of interfacial tension, fluorescence and NMR spectroscopy. Enthalpies of micellization were measured at three different temperatures using ITC. The Taylor dispersion method and DOSY NMR were used to determine diffusion coefficients of the ionic liquid surfactants in aqueous solution at 298.15K. Several correlations between structural features of the surfactant species, such as the number and size of their alkyl chains, and the thermodynamic quantities of micellization-expressed by experimental values of cmc, counter-ion binding fraction, Δ(mic)G°, Δ(mic)°, and Δ(mic)S°-are established. We could interpret the different contributions of the two alkyl side chains to the aggregation properties in terms of the balance of interactions in homogeneous and micellar phases, contributing to understanding the aggregation behavior of ionic liquids in water and the parallel between these systems and traditional ionic surfactants.     

Soluble complexes of sodium poly(isoprene-b-methacrylate) micelles with cationic surfactants in aqueous media

Water-soluble complexes between sodium poly(isoprene-b-methacrylate) (NaIMA) amphiphilic block copolymer micelles and two cationic surfactants with different hydrophobic tail lengths, namely, dodecyltrimethylammonium bromide (DTMAB) and octyltrimethylammonium bromide (OTMAB), were prepared by mixing individual aqueous solutions of block copolymers and surfactants. The complexes were characterized in terms of size, overall charge, and micropolarity by dynamic light scattering, zeta-potential measurements, and fluorescence spectroscopy. Properties of the systems were investigated as a function of surfactant concentration and surfactant type and state in the initial solutions, as well as temperature. Experiments reveal surfactant complexation at the coronal sodium poly(methacrylate) (NaMA) chains, followed by an increase in mass and a decrease in size of the micelles. Complexation of individual surfactant micelles was observed when the DTMAB concentration in the starting solutions was higher than the surfactant cmc. The complexes show a temperature dependence of their dimension due to the hydrophobic effect.     

Effect of surfactant head group size on polyelectrolyte-surfactant interactions: steady-state and time-resolved fluorescence study

Interactions between sodium poly(acrylate) (NaPAA) and dodecyltrimethyl/ethyl/propyl/butylammonium bromide (C12NM, C12NE, C12NP, and C12NB) were studied. Variation of the physicochemical properties of the surfactants and polyelectrolyte-surfactant mixtures, such as critical micelle concentration (cmc), critical aggregation concentration (cac), micellar micropolarity, aggregation number, and pyrene lifetime, were determined by steady-state and time-resolved fluorescence methods. It is shown that the surfactant head group size has a striking effect on the interaction between surfactant and polyelectrolyte. The interaction is weakened gradually when the surfactant head group is increased from trimethyl to tripropyl, which might be owing to the increase of the steric hindrance between the polyelectrolyte chain and micellar surface. But when the head group is tributyl, the interaction is enhanced and stronger than that between C12NP and NaPAA. This might be explained by the self-association of the C12NB head groups.     

Synthesis and properties of a novel class of gemini pyridinium surfactants

A novel class of gemini pyridinium surfactants with a four-methylene spacer group was synthesized, and their surface-active properties and interactions with polyacrylamide (PAM) were evaluated by surface tension, fluorescence, and viscosity measurements. A comparison between the gemini pyridinium surfactants and their corresponding monomers was also made. The cmc's of gemini pyridinium surfactants are much lower than those of the corresponding monomeric surfactants. The C20 value is about one order of magnitude lower than that of corresponding monomers, and the longer the hydrophobic chains of the surfactants, the lower the cmc value. Surface tension measurements of the surfactant-PAM mixed systems show that the critical aggregation concentration (cac) value is much lower than the cmc value of the surfactant system alone. Viscosity measurements of the surfactant-PAM mixed systems show that the relative viscosity of the surfactant-PAM system decreased with increasing concentration of surfactant. Additionally, fluorescence measurements of the surfactant-PAM mixed system suggest the formation of surfactant-polymer aggregates, and the gemini pyridinium surfactant with longer hydrophobic chains have a stronger interaction with PAM, owing to the stronger hydrophobic interaction.     

Effect of a copolymer poly(4-styrenesufonic acid-co-maleic acid) sodium salt on aggregation behavior of surface active ionic liquid 1-tetradecyl-3-methylimidazolium bromide and structurally similar conventional surfactant tetradecyltrimethylammonium bromide in aqueous media

The complex formation of anionic copolymer poly(4-styrenesufonic acid-co-maleic acid) sodium salt (PSSA-co-MA) with surfactant tetradecyltrimethylammonium bromide (TTAB) and surface active ionic liquid (SAIL) 1-tetradecyl-3-methylimidazolium bromide ([C₁₄mim][Br]) has been studied in aqueous media by utilizing various techniques such as tensiometry, conductometry and fluorimetry. Conductometric and tensiometric curve of all the investigated systems demonstrate four break points corresponding to four transition states. All the thermodynamic and surface properties of surfactant-polyelectrolyte systems have been determined by conductance and surface tension measurements respectively. The value of cmc decreases with increasing the concentration of polyelectrolyte for studied systems. But it has been observed that, the lowering in cmc values is more in [C₁₄mim][Br]-PSSA-co-MA system than TTAB-PSSA-co-MA system, although the differences in cmc are not much significant. The lowering in cmc of [C₁₄mim][Br]-PSSA-co-MA system shows that ionic attractions between cationic head group [C₁₄mim]⁺ and anionic parts (SO₃^? and COOH), are stronger than those in TTA⁺ and anionic parts (SO₃^? and COOH). The results indicated that the [C₁₄mim][Br]-PSSA-co-MA complexes are comparatively more surface active than TTAB-PSSA-co-MA complexes. The fluorescence probe behaviour also confirms cmc value and provides aggregation number (N_agg). Finally all the findings of [C₁₄mim][Br] and TTAB have been compared.     

Polymer-Surfactant Interactions and the Effect of Tail Size Variation on Micellization Process of Cationic ATAB Surfactants in Aqueous Medium

The interactions between oppositely charged surfactant-polymer systems have been studied using surface tension and conductivity measurements and the dependence of aggregation phenomenon over the polyelectrolyte concentration and chain length of cationic ATAB surfactants, cetyltrimethyl ammonium bromide (CTAB), tetradecyltrimethyl ammonium bromide (TTAB), and dodecyltrimethyl ammonium bromide (DTAB) have been investigated. It was observed that cationic surfactants induce cooperative binding with anionic polyelectrolyte at critical aggregation concentration (cac). The cac values of ATAB surfactants in the presence of anionic polyelectrolyte, sodium carboxy methyl cellulose (NaCMC), are considerably lower than their critical micelle concentration (cmc). After the complete complexation, free micelles are formed at the apparent critical micelle concentration (acmc), which is slightly higher in polyelectrolyte aqueous solution than in pure water. Among the cationic surfactants (i.e., CTAB, TTAB, and DTAB), DTAB was found to have least interaction with NaCMC. Surfactants with longer tail size strongly favor the interaction, indicating the dependence of aggregation phenomenon on the structure, morphology, and tail length of the surfactant.      

Influence of ionic and nonionic hydrotropes on micellar behavior of a cationic gemini surfactant butanediyl-1,4-bis(dimethylcetylammonium bromide)

Micellization of binary systems of a cationic gemini surfactant butanediyl-1,4-bis(dimethylcetylammonium bromide) (16-4-16) and cationic/nonionic hydrotropes (aniline-hydrochloride, 2-methylanilinehydrochloride, 4-methylanilinehydrochloride, hydroxybenzene, 1,3-benzenediol, benzene-1,2,3-triol) have been studied using a conductometric technique. The critical micelle concentrations (cmc) for different mixing mole fractions at different temperatures have been calculated. To explain and compare the results, theoretical models of Clint, Rubingh and Motomura have been used to obtain the ideal cmc, mixed micelle composition, interaction parameters (β(m)), free energies of micellization, and activity coefficients. The mixtures show nonideal behavior and the interactions between the surfactants and the hydrotropes are synergistic in nature which is confirmed by high negative β(m) values and low values of the activity coefficients. Thermodynamic parameters were also obtained from the temperature dependence of the cmc values.     

Interfacial and aggregation properties of the binary mixture of decanoyl-N-methyl-glucamide and hexadecyltriphenylphosphonium bromide

The interfacial and aggregation behavior of the nonionic surfactant decanoyl-N-methyl-glucamide (Mega-10) with the cationic surfactant hexadecyltriphenylphosphonium bromide (HTPB) have been studied using interfacial tension measurements and fluorescence techniques. From interfacial tension measurements, the critical micellar concentrations (cmc) and various interfacial thermodynamic parameters have been evaluated. The experimental results were analyzed in the context of the pseudophase separation model, the regular solution theory, and the Maeda’s approach. These approaches allowed us to determine the interaction parameter and composition in the mixed state. By using the static quenching method, the mean micellar aggregation numbers of pure and mixed micelles of HTPB+Mega-10 were obtained. It was found that that the aggregation number decreases with increasing mole fraction of HTPB. This behavior is attributed to the presence of the bulky head group of HTPB, which creates steric head group incompatibility and/or electrostatic repulsion. The micropolarity of the micelle was monitored with pyrene fluorescence intensity ratio. It was observed that the increasing participation of HTPB induces the formation of micelles with a hydrated structure. The polarization of the fluorescent probe Rhodamine B was monitored in micellar medium and found to increase with the increase of ionic content. This behavior suggests the formation of mixed micelles with a more ordered or rigid structure.     

The role of the surfactant head group in the emulsification process: Single surfactant systems

To clarify the effect of the surfactant head group on the emulsification process, dilute dodecane in water emulsions were prepared in a small flow-through cell with three surfactants which had the same hydrocarbon tail length but different head groups. The different surfactants types were (a) a nonionic, hexa(ethyleneglycol) mono n-dodecyl ether (C12E6), (b) an anionic, sodium dodecyl sulfate (SDS), and (c) a cationic, n-dodecyl pyridinium chloride (DPC), and the emulsions were prepared under the same conditions. From dynamic light scattering measurements, it was shown that the mean steady state droplet size of the emulsions (obtained after 20 min dispersion) could be related to the interfacial tension at concentrations in the region of the cmc. This result was in agreement with laminar and turbulent viscous flow theory. However, the particle size versus surface tension data for the different surfactant systems did not fall on a single line. This behavior suggested that the surfactant played a secondary role in defining the droplet size (in addition to reducing the interfacial tension) possibly through diffusion and relaxation, during deformation of the interface. In addition, it was found that the values of the equilibrium "surfactant packing densities" of the different surfactants at the oil/water interface were almost equal near the cmc, but the mean droplet size and the interfacial tension at the cmc decreased following the order DPC>SDS>C12E6 .     

Effect of surfactant chain length on the binding interaction of a biological photosensitizer with cationic micelles

Steady-state and time-resolved fluorometric techniques have been exploited to study the photophysical and distribution behavior of an efficient cancer cell photosensitizer, norharmane (NHM), in well-characterized, biomimicking nanocavities formed by cationic micelles with varying surfactant chain length. Amphiphiles like dodecyl trimethyl ammonium bromide (DTAB), tetradecyl trimethyl ammonium bromide (TTAB), and cetyl trimethyl ammonium bromide (CTAB) have been used for the purpose. Emission behavior of NHM is very much dependent on the surfactant concentration as well as their hydrophobic chain length. The binding constant (K) and free-energy change (DeltaG) for the interaction of NHM with the cationic micelles have been determined from the fluorescence data. Polarity of the microenvironment around the probe has been determined in the cationic micellar environments from a comparison of the variation of fluorescence properties of the two-prototropic species of the probe in water/dioxane mixture with varying composition. Experimental results demonstrate that the variation in the cationic surfactant chain length plays an important role in promoting a specific prototropic form of the probe molecule. Fluorescence decays are biexponential in all the micelles indicating that the probe molecules are distributed between the two distinct regions of the micelles. The population of the component with a longer lifetime corresponds to the probe in the head group site, while the short-lived component comes from the probe bound to the core region of the micelles. On the basis of the lifetime measurements, the partitioning behavior of the chromophore in the head group and in the core regions in the micelles has been determined.     

Self-Aggregation of Cationic Dimeric and Anionic Monomeric Surfactants with Nonionic Surfactant in Aqueous Medium

Spectrofluorometric measurements have been used to elaborate the self-aggregation of mixture of anioinic, sodium dodecylbenzenesulfonate (SDBS), and cationic gemini, alkanediyl-α, ω-bis (tetradecyldimethylammonium bromide) (14-4-14) with nonionic surfactant, polyoxyethylene 10 cetyl ether (Brij-56). The critical micelle concentration (cmc) of the binary mixtures has been investigated. Application of the regular solution theory (RST) to the experimental data yield the interaction parameter at mixed micelles (β), indicate an attractive interaction and reflect the synergistic behavior in both Brij-56/SDBS and Brij-56/14-4-14 systems. The micelle aggregation number (N _agg) was measured using a steady state fluorescence quenching method. The N _agg values of the mixed surfactant system were larger than those of pure components. The micropolarity of various combinations and the binding constants (K _sv) were determined from the ratio of intensity of peaks (I ₁/I ₃) of pyrene fluorescence emission spectrum and its quenching, respectively.     

Micellar behavior of aqueous solutions of dodecyldimethylethylammonium bromide, dodecyltrimethylammonium chloride and tetradecyltrimethylammonium chloride in the presence of alpha-, beta-, HPbeta- and gamma-cyclodextrins

Conductivity, static fluorescence and (1)H NMR measurements have been carried out to study the micellar behavior of aqueous solutions of dodecyldimethylethylammonium bromide (DDAB), dodecyltrimethylammonium chloride (DTAC) and tetradecyltrimethylammonium chloride (TDAC) in absence and presence of alpha-cyclodextrin (alpha-CD), beta-cyclodextrin (beta-CD), hydroxypropyl-beta-cyclodextrin (HPbeta-CD) and gamma-cyclodextrin (gamma-CD). The conductivity measurements were carried out at 298.15 K. The influence of cyclodextrins on the micellar parameters, such as cmc* (apparent critical micellar concentration), beta (degree of ionization) have been analyzed. Thermodynamics of the systems was discussed in terms of the change in standard free energy of micellization, DeltaG(m)(0). Micellization was found to be less spontaneous in presence of cyclodextrins. The fluorescence intensity of the surfactant solutions is enhanced by the addition of cyclodextrins. The association constants obtained from conductivity and fluorescence data suggest the binding of gamma-CD with the surfactants to be strongest among all the cyclodextrins used. (1)H NMR chemical shift changes provide powerful means for probing the cyclodextrin-micellar interactions and inclusion of surfactant is shown by the change in the chemical shift of some of the guest and host protons in comparison with the chemical shifts of the same protons in the free compounds.     

Effect of terbium(III) chloride on the micellization properties of sodium decyl- and dodecyl-sulfate solutions

The effect of TbCl3 on the aggregation processes of the anionic surfactants sodium decyl sulfate (SDeS) and sodium dodecyl sulfate (SDS) has been investigated. Electrical conductivity data, combined with Tb(III) luminescence measurements suggest that the formation of micelles involving TbCl3 and SDS occurs at concentrations below the critical micelle concentration (cmc) of the pure surfactants; the formation of these mixed aggregates was also monitored by light scattering, which indicates that the addition of TbCl3 to surfactant concentration at values below the pure surfactant cmc results in a much greater light scattering than that found with pure sodium alkylsulfate surfactant micelles. This phenomenon is dependent upon the alkyl chain length of the surfactant. With Tb(III)/DS-, complexes are formed with a cation/anion binding ratio varying from 3 to 6, which depends upon the initial concentration of Tb(III). This suggests that the majority of the cation hydration water molecules can be exchanged by the anionic surfactant. When the carbon chain length decreases, interactions between surfactant and Tb(III) also decrease, alterations in conductivity and fluorescence data are not so significant and, consequently, no binding ratio can be detected even if existing. The surfactant micellization is dependent on the presence of electrolyte in solution with apparent cmc being lower than the corresponding cmc value of pure SDS.     

Micellar Interactions in Nonionic/Ionic Mixed Surfactant Systems

To study the influence of the chemical nature of headgroups and the type of counterion on the process of micellization in mixed surfactant systems, the cmc's of several binary mixtures of surfactants with the same length of hydrocarbon tail but with different headgroups have been determined as a function of the monomer composition using surface tension measurements. Based on these results, the interaction parameter between the surfactant species in mixed micelles has been determined using the pseudophase separation model. Experiments were carried out with (a) the nonionic/anionic C(12)E(6)/SDS ((hexa(ethyleneglycol) mono-n-dodecyl ether)/(sodium dodecyl sulfate)), (b) amphoteric/anionic DDAO/SDS ((dodecyldimethylamine oxide)/(sodium dodecyl sulfate)), and (c) amphoteric/nonionic C(12)E(6)/DDAO mixed surfactant systems. In the case of the mixed surfactant systems containing DDAO, experiments were carried out at pH 2 and pH 8 where the surfactant was in the cationic and nonionic form, respectively. It was shown that the mixtures of the nonionic surfactants with different kinds of headgroups exhibit almost ideal behavior, whereas for the nonionic/ionic surfactant mixtures, significant deviations from ideal behavior (attractive interactions) have been found, suggesting binding between the head groups. Molecular orbital calculations confirmed the existence of the strong specific interaction between (1) SDS and nonionic and cationic forms of DDAO and between (2) C(12)E(6) and the cationic form of DDAO. In the case for the C(12)E(6)/SDS system, an alternative mechanism for the stabilization of mixed micelles was suggested, which involved the lowering in the free energy of the hydration layer. Copyright 2000 Academic Press.     

Interaction between biosurfactant surfactin and cationic surfactant cetyl trimethyl ammonium bromide in mixed micelle

An anionic/cationic mixed surfactant aqueous system of surfactin and cetyl trimethyl ammonium bromide (CTAB) at different molar ratios was studied by surface tension and fluorescence methods (pH 8.0). Various parameters that included critical micelle concentration (cmc), micellar composition (X ₁), and interaction parameter (β ^m) as well as thermodynamic properties of mixed micelles were determined. The β ^m was found to be negative and the mixed system was found to have much lower cmc than pure surfactant systems. There exits synergism between anionic surfactin and cationic CTAB surfactants. The degree of participation of surfactin in the formation of mixed micelle changes with mixing ratio of the two surfactants. The results of aggregation number, fluorescence anisotropy, and viscosity indicate that more packed and larger aggregates were formed from mixed surfactants than unmixed, and the mixed system may be able to form vesicle spontaneously at high molar fraction of surfactin.     

SPECTROSCOPIC AND DYNAMIC CHARACTERIZATION OF FMN IN REVERSED MICELLES ENTRAPPED WATER POOLS

Abstract— The encapsulation of FMN in surfactant entrapped water pools resulted into specific interactions of FMN with the polar head groups, the entrapped water molecules and the outer apolar solvent. Two positively charged surfactant/solvent systems were employed: dodecyl ammonium propionate (DAP) in toluene and hexadecyltrimethylammonium bromide (CTAB) in chloroform/ n -octane (6:5, vol/vol). Also a surfactant with a negatively charged polar head group, sodium bis (2-ethylhexyl) sulfosuccinate (AOT) in n -octane, was used. In CTAB and especially DAP reversed micellar systems the light absorption spectra revealed the localization of the flavin in a more apolar environment, while in AOT reversed micelles FMN appeared to reside mainly in the core of the water pool. The fluorescence spectra showed unresolved bands, which were blue-shifted in DAP and CTAB reversed micelles as compared to the spectra of aqueous FMN solutions. The fluorescence decay kinetics of FMN in enclosed water droplets is non-exponential. The heterogeneity can be explained assuming incomplete relaxation of partly immobilized water molecules during the lifetime of the excited singlet state. The relatively high anisotropy of the fluorescence of FMN in encapsulated water indicated a higher viscosity than in bulk water. This was confirmed by anisotropy decay measurements of FMN in DAP and AOT entrapped water, for which the rotational correlation times were much longer than for FMN in plain water.     

Studies of mixed micelle formation between cationic gemini and cationic conventional surfactants

Mixed micellization of dimeric cationic surfactants tetramethylene-1,4-bis(hexadecyldimethylammonium bromide)(16-4-16), hexamethylene-1,6-bis(hexadecyldimethylammonium bromide) (16-6-16) with monomeric cationic surfactants hexadecyltrimethylammonium bromide (CTAB), cetylpyridinium bromide (CPB), cetylpyridinium chloride (CPC), and tetradecyltrimethylammonium bromide (TTAB) have been studied by conductivity and steady-state fluorescence quenching techniques. The behavior of mixed systems, their compositions, and activities of the components have been analyzed in the light of Rubingh's regular solution theory. The results indicate synergism in the binary mixtures. Ideal and experimental critical micelle concentrations (i.e., cmc(*) and cmc) show nonideality, which is confirmed by beta values and activity coefficients. The micelle aggregation numbers (N(agg)), evaluated using steady-state fluorescence quenching at a total concentration of 2 mM for CTAB/16-4-16 or 16-6-16 and 5 mM for TTAB/16-4-16 or 16-6-16 systems, indicate that the contribution of conventional surfactants was always more than that of the geminis. The micropolarity, dielectric constant and binding constants (K(sv)) of mixed systems have also been evaluated from the ratios of respective peak intensities (I(1)/I(3) or I(0)/I(1)).     

Cationic Mixed Micelles in the Presence of beta-Cyclodextrin: A Host-Guest Study

The conductances of trimethyltetradecylammonium bromide (TTAB)+triphenyltetradecylphosphonium bromide (TTPB) and TTAB+trimethylhexadecylammonium bromide (HTAB) over the entire mole fraction range of TTAB (alpha(TTAB)) were measured in water and in beta-cyclodextrin+water (CD+W) mixtures at fixed 4 and 8 mM of CD at 30 degrees C. The conductivity plots for both binary mixtures show a single break from which the mixed critical micelle concentration (cmc) and degree of micelle ionization (chi) were computed. From the slopes of the conductivity curves, the equivalent ionic conductivities of the monomeric (Lambda(m)), associated (Lambda(ass)), and the micelle (Lambda(mic)) states were calculated and discussed with respect to the surfactant-CD complexation in the whole mole fraction range of both surfactant binary mixtures. The association constant (K) between the respective monomeric surfactant and CD cavity of fixed 4 mM CD was computed by considering 1:1 association from the surface tension measurements. A comparison among the K values for HTAB-CD, TTAB-CD, and TTPB-CD shows that the former complexation is significantly stronger in comparison to the other ones due to the longer hydrophobic tail. The nonideality in mixed micelle formation in pure water was evaluated by using the regular solution theory, and it was observed that both binary mixtures exhibit close to ideal behavior. Copyright 2000 Academic Press.     

Aqueous behaviour of cationic surfactants containing a cleavable group

The aggregation behaviour of two novel cationic RAFT agents (transfer surfactants); N,N-dimethyl-N-(4-(((phenylcarbonothioyl)thio)methyl)benzyl)ethanammonium bromide (PCDBAB) and N-(4-((((dodecylthio)-carbonothioyl)thio)methyl)benzyl)-N,N-dimethylethanammonium bromide (DCTBAB) in diluted solutions have been investigated by surface tension, conductimetry and microcalorimetry measurements. The thermodynamic parameters i.e. the critical micelle concentration (cmc), the degree of micelle ionization (alpha), the head group surface area (a 0), Delta H mic, Delta G mic and T Delta S mic are reported at 303 K. The thermodynamic parameters have been compared to those of the conventional surfactant cetyltrimethylammonium bromide (CTAB) in order to specify structural relationships. The obtained results have been discussed considering the hydrophobic behaviour of the S-C=S- linkage and the specific interactions that arise from the introduction of the benzene ring into the hydrophobic part.