Nanostructured Crystals of Fluorite Phases Sr1 – xRxF2 + x (R Are Rare-Earth Elements) and Their Ordering. 13: Crystal Structure of SrF2 and Concentration Dependence of the Defect Structure of Nonstoichiometric Phase Sr1 – xLaxF2 + x As Grown (x = 0.11, 0.20, 0.32, 0.37, 0.47)

Crystallography Reports - The defect structure of as-grown SrF2 and nonstoichiometric phases Sr1 – xLaxF2 + x (x = 0.11, 0.20, 0.32, 0.37, 0.47) single...     

Optimization of the Compositions of Solid Electrolytes Cd1 – xRxF2 + x (R = La–Lu,Y) with a Fluorite-Type Structure for Conductivity and Thermal Stability

Crystallography Reports - Optimization of the compositions of Cd1–xRxF2+x nonstoichiometric phases (CaF2 type, R is a rare-earth element) for the ionic conductivity and thermal stability is...     

Optimization of the Compositions of Solid Electrolytes Pb1 – xRxF2 + x with Fluorite-Type Structure in Conductivity and Thermal Stability

Crystallography Reports - The compositions of nonstoichiometric phases Pb1 – xRxF2 + x (CaF2 type, R is a rare-earth element) have been optimized with...     

Comparative Analysis of the Methods for Obtaining Superconducting Fe1 + ySexTe1 – x Single Crystals

Crystallography Reports - The Fe1 + ySexTe1 – x single crystals grown by the KCl flux and Bridgman methods have been compared using the same investigation...     

The glass transition temperature of mixed glass former 0.35Na2O + 0.65[xB2O3 + (1 − x)P2O5] glasses

The mixed glass former effect (MGFE) is defined as the non-linear and non-additive change in the ionic conductivity with changing glass former fraction at constant modifier composition between two binary glass former compositions. In this study, sodium borophosphate glasses, 0.35Na₂O + 0.65[xB₂O₃ + (1 ? x)P₂O₅] with 0 ≤ x ≤ 1, have been prepared and their glass transition temperatures (T_g) have been examined as an alternative indicator of the MGFE and as an indicator of changes in the short range order (SRO) structural network units that could cause or contribute to the MGFE. The changes in T_g show a positive non-additive and non-linear trend over the changing glass former fraction, x. The increase in T_g is related to the increasing number of bridging oxygens (BO) in the glass samples, which is caused by the increase in the number of tetrahedral boron, B⁴, units in the SRO structure.     

The Crystal-Chemical Features of Phases and the Nature of the Coordination Bond in the System [CuxNi(1 – x){N(CH2PO3)3}]Na4 · nH2O (x = 0–1)

Crystallography Reports - The structural features of the phases formed during crystallization of mixed copper and nickel complexes with nitrilotris(methylenephosphonic acid)...     

Structural analysis of xCsCl(1 − x)Ga2S3 glasses

Sulphide glasses doped with rare-earth ions have been demonstrated to be suitable for photonic applications such as optical amplifiers, up-converters and fiber lasers. The substitution of metal halides into the glass network has been shown to result glasses with desirable properties in terms of quantum efficiency and fiber manufacture [J.R. Hector, J. Wang, D. Brady, M. Kluth, D.W. Hewak, W.S. Brocklesby, D.N. Payne, Journal of Non-Crystalline Solids 239 (1998) 176]. To assist in the understanding of this improvement a structural analysis of glasses with a composition xCsCl(1 ? x)Ga₂S₃ has been undertaken in order to examine the nature of the gallium environment. Information collected by high energy X-ray diffraction and neutron diffraction have been analyzed to permit the identification of the structural units as Ga centered tetrahedra. The interconnection between the tetrahedra was found to be predominantly corner sharing.     

Nanostructured crystals of fluorite phases Sr1 − x R x F2 + x (R are rare earth elements) and their ordering: 5. A study of the ionic conductivity of as-grown Sr1 − x R x F2 + x crystals

Crystallography Reports - The ionic conductivity σ of Sr1 ? x R x F2 + x crystals (R = Y, La-Lu) has been measured in the temperature range of 324–933 K. The isomorphic...     

Epitaxial lateral overgrowth of non-polar GaN(1 1̄ 0 0) on Si(1 1 2) patterned substrates by MOCVD

m-Plane GaN was grown selectively by metal–organic chemical vapor deposition (MOCVD) on patterned Si(1 1 2) substrates, where grooves aligned parallel to the Si〈1 1 0〉 direction were formed by anisotropic wet etching to expose the vertical Si{1 1 1} facets for growth initiation. The effect of growth conditions (substrate temperature, chamber pressure, and ammonia and trimethylgallium flow rates) on the growth habits of GaN was studied with the aim of achieving coalesced m-plane GaN films. The epitaxial relationship was found to be GaN(1 1? 0 0) || Si(1 1 2), GaN[0 0 0 1] || Si[1 1 –1], GaN[1? 1? 2 0] || Si[1 1? 0]. Among all growth parameters, the ammonia flow rate was revealed to be the critical factor determining the growth habits of GaN. The distribution of extended defects, such as stacking faults and dislocations, in the selectively grown GaN were studied by transmission electron microscopy in combination with spatially resolved cathodoluminescence and scanning electron microscopy. Basal-plane stacking faults were found in the nitrogen-wing regions of the laterally overgrown GaN, while gallium-wings were almost free of extended defects, except for the regions near the GaN/Si{1 1 1} vertical sidewall interface, where high dislocation density was observed.     

The densities of mixed glass former 0.35 Na2O + 0.65 [xB2O3 + (1 − x)P2O5] glasses related to the atomic fractions and volumes of short range structures

The mixed glass former effect (MGFE) is defined as a non-linear and non-additive change in the ionic conductivity with changing glass former fraction at constant modifier composition between two binary glass forming compositions. In this study, mixed glass former (MGF) sodium borophosphate glasses, 0.35 Na₂O + 0.65 [xB₂O₃ + (1 ? x)P₂O₅], 0 ≤ x ≤ 1, which have been shown to have a strong positive MGFE, have been prepared and their physical properties, density and molar volume, have been examined as predictors of structural change. The density exhibits a strong positive non-linear and non-additive change in the density with x and a corresponding negative non-linear and non-additive change in the molar volume. In order to understand the structural origins of these changes, a model of the molar volume was created and best-fit to the experimentally determined molar volumes in order to determine the volumes of the short range order (SRO) structural units in these glasses, how these volume change from the molar volumes of the binary glasses, and how these volumes change across the range of x in the ternary glasses. The best-fit model was defined as the model that required the smallest changes in the volumes of the ternary phosphate and borate SRO structural groups from their values determined by the densities of the binary sodium phosphate and sodium borate glasses. In this best-fit molar volume model, it was found that the volumes of the various phosphate and borate SRO structural groups decreased by values ranging from a minimum value of ~ 1% for x = 0.1 and 0.9 to a maximum value of ~ 6% for the phosphate and ~ 9% for the borate SRO groups at the minimum in molar volume at x = 0.4. The free volume was found to have a negative deviation from linear which is unexpected given the positive deviation in ionic conductivity.     

Nanostructured crystals of fluorite phases Sr1 − x R x F2 + x and their ordering: 9. The defect crystal and real structure of quenched fluorite phases Sr1 − x Ce x F2 + x (x = 0–0.5)

A Sr_0.7Ce_0.3F_2.3 crystal (CaF₂ type, sp. gr. $Fm\bar 3m$ ), obtained by quenching from melt, has been studied for the first time by X-ray diffraction. Fluorine vacancies and interstitial anions are found in the 8c and 32f sites, respectively. The defect ratio in the Sr_0.7Ce_0.3F_2.3 structure corresponds to the tetrahedral cluster configuration of defects {Sr_{4 ? n} Ce _n F₂₆}. The defect structure of quenched (at a rate of ～25 K/min) crystal differs from that of a crystal grown from melt (cooling at a rate of ～3 K/min) by the displacement of some cations (presumably Ce³⁺) along the threefold axis to the 32f site and the anisotropy of thermal vibrations of ions in the cluster core (F _int(32f)3). The concentration dependence of the lattice parameters of quenched Sr_{1 ? x} Ce _x F_{2 + x} phases (x = 0–0.5) is described by a third-order polynomial: a = 5.80009 + 1.166518 × 10^?3 x ? 1.124969 × 10^?5 x ² + 8.258155 × 10^?8 x ³. The compositional dependence of microdistortions is also nonlinear; maximum microdistortions are observed in the SrF₂ crystal. They decrease with an increase in the cerium concentration x to ～ 0.35. The minimum in the range x = 0.30–0.35 correlates with a composition corresponding to the peak (at x ～ 0.29) in the melting curves of the fluorite phase estimated from the phase diagram of the SrF₂-CeF₃ system (the method of thermal analysis).     

Growth of Sm1 – ySryF3 – y (0 < y ≤ 0.31) Crystals and Investigation of Their Properties

Crystallography Reports - Sm1&nbsp;–&nbsp;ySryF3&nbsp;–&nbsp;y (0 &lt; y ≤ 0.31) crystals have been grown from melt by directional solidification in a...     

Synthesis and structure–property relations in xCuO–(1 − x)Bi2O3 (0.5 ⩽ x ⩽ 0.9) (C1–C5: x = 0.5, 0.6, 0.7, 0.8, 0.9) glasses

Synthesis of the xCuO–(1 ? x)Bi₂O₃ (0.5 ? x ? 0.9) (C1–C5: x = 0.5, 0.6, 0.7, 0.8, 0.9) glasses was done via nitrate–citrate gel route. Glassy phase is ascertained by XRD studies. Magnetic susceptibility results in the range 4.2–400 K show weak paramagnetic nature with exchange integrals ～0.024–0.13 eV in the glasses. The electron paramagnetic resonance (EPR) in the range 4.2–363 K shows g ≈ 2.0 and the trend of the g-matrix elements g_|| > g_⊥ > g_e for the glasses C1–C5 at 4.2 K are due to the Cu²⁺ (3d⁹) paramagnetic site in the glasses which is in a tetragonally elongated octahedron [O_1/2–CuO_4/2–O_1/2] having D_4h symmetry. IR spectroscopic results show the presence of octahedron [BiO_6/2]^3? and [CuO_6/2]^4? units and pyramidal [BiO_2/2O]^? unit in the glasses.     

Mössbauer and Magnetic Study of Lanthanum Manganite La1 – xCaxMn0.98Fe0.02O3 + δ (x = 0.05, 0.10, 0.20): Nonstoichiometric and Stoichiometric Composition

Crystallography Reports - Mössbauer and magnetic study of calcium-doped lanthanum manganites La1&nbsp;–&nbsp;xCaxMn0.98Fe0.02O3&nbsp;+&nbsp;δ (x = 0.05, 0.10, 0.20)...     

The preparation and structural studies in the (80 − x)TeO2–20ZnO–(x)Er2O3 glass system

Er³⁺-doped tellurite glasses of the (80 ? x)TeO₂–20ZnO–(x)Er₂O₃ system (0.5 mol% ? x ? 2.5 mol%) have successfully been made by melt-quenching technique and their structure has been investigated by means of DTA and Raman spectroscopy. The DTA results show the thermal parameters; such as the glass transition temperature (T_g) and crystallization temperature (T_c) were determined. It is found that this system provides a stable and wide glass formation range in which the glass stability around 99–140 °C may be obtained. The Raman spectroscopy used the structural studies in the glass system. Two Raman shift peaks were observed around 640–670 cm^?1 and 720–740 cm^?1, which correspond to the stretching vibration mode of TeO₄ tbp and TeO₃ tp, respectively. It is found that the spectral shift in Raman spectra is depending on the Er₂O₃ content. This evolution is an indication of the changes in the basic unit of the glass structure.     

Study of the Fracture Toughness of K2NixCo(1 – x)(SO4)2 · 6H2O Crystals in Dependence of the Growth Direction and Rate

Crystallography Reports - K2Ni(SO4)2 · 6H2O (KNSH), K2Co(SO4)2 · 6H2O (KCSH), and K2NixCo(1&nbsp;–&nbsp;x)(SO4)2 · 6H2O (KCNSH) crystals have been grown by traditional...     

Structure and properties of the 70Li2S · (30 − x)P2S5 · xP2O5 oxysulfide glasses and glass–ceramics

The 70Li₂S · (30 ? x)P₂S₅ · xP₂O₅ (mol%) oxysulfide glasses were prepared by the melt quenching method. The glasses were prepared in the composition range 0 ≦ x ≦ 10. The glass–ceramics were prepared by heating the glasses over crystallization temperatures. The PO_nS_3?n (n = 1–3) oxysulfide units were produced in the glasses and glass–ceramics by partial substituting P₂O₅ for P₂S₅. In particular, the P₂OS₆^4? unit would be produced by substituting a small amount of P₂O₅ for P₂S₅. The oxygen atoms were incorporated into the Li₇P₃S₁₁ crystal structure because the diffraction peaks of the oxysulfide glass–ceramic shifted to the higher angle side. The glass–ceramic with 3 mol% of P₂O₅ exhibited the highest conductivity of 3.0 × 10^?3 S cm^?1 and the lowest activation energy for conduction of 16 kJ mol^?1. The P₂OS₆^4? dimer units in the oxygen-incorporated Li₇P₃S₁₁ crystal would improve conductive behavior of the Li₂S–P₂S₅ glass–ceramics.     

Nanostructured crystals of fluorite phases Sr1−x R x F2+x and their ordering: VIII. Imperfect crystal structure of Sr0.71Ce0.29F2.29

A congruently melting single crystal of nonstoichiometric phase Sr_0.71Ce_0.29F_2.29 crystallizing into the CaF₂ structural type (sp. gr Fm $\bar 3$ m) has been studied by X-ray diffraction analysis. Vacancies in the main fluorine position 8c and interstitial anions in two 32f positions have been found. The ratio of the structural defects in the Sr_0.71Ce_0.29F_2.29 solid solution corresponds to the tetrahedral configuration of the defect cluster {Sr_{4 ? n} Ce _n F₂₆}.