Stimuli-responsive surfaces for bio-applications

The development of surfaces that have switchable properties, also known as smart surfaces, have been actively pursued in the past few years. The recent surge of interest in these switchable systems stems from the widespread number of applications to many areas in science and technology ranging from environmental cleanup to data storage, micro- and nanofluidic devices. Moreover, the ability to modulate biomolecule activity, protein immobilisation, and cell adhesion at the liquid-solid interface is important in a variety of biological and medical applications, including biofouling, chromatography, cell culture, regenerative medicine and tissue engineering. Different materials have been exploited to induce such changes in surface biological properties that are mostly based on self-assembled monolayers or polymer films. This critical review focuses on the recent progress in the preparation of these switchable surfaces, and highlights their applications in biological environments. The review is organized according to the external stimuli used to manipulate the properties of the substrate-chemical/biochemical, thermal, electric and optical stimuli. Current and future challenges in the field of smart biological surfaces are addressed (189 references).     

Surface Reconstruction by a Coassembly Approach

Materials with switchable surfaces, capable of changing surface properties under external stimuli, are playing a pivotal role in many applications, such as tissue engineering, biosensors, and drug/protein delivery. In this research silica particles with patterned and switchable surfaces are fabricated. Surface micelles on silica particles are formed by coassembly of polymer brushes and “free” block copolymer chains in a selective solvent. The cores of the surface micelles are crosslinked by anthracene photodimerization. After quaternization of the coronae, amphiphilic surface micelles are prepared. The surface micelles are able to rearrange in different media. After treatment with an organic solvent, the surfaces of silica particles are occupied by hydrophobic polymer components; in aqueous solution, the positively charged polymer chains are on the surfaces. The switching of the surface micelles results in changes in surface composition and wetting behaviors.     

Switching the electrochemical impedance of low-density self-assembled monolayers

Because the active remodeling of biointerfaces is a paramount feature of nature, it is very likely that future, advanced biomaterials will be required to mimic at least certain aspects of the dynamic properties of natural interfaces. This need has fueled a quest for model surfaces that can undergo reversible switching upon application of external stimuli. Herein, we report the synthesis and characterization of a model system for studying reversibly switching surfaces based on low-density monolayers of mercaptohexadecanoic acid and mercaptoundecanoic acid. These monolayers were assembled on both gold and silver electrodes. When conducting electrochemical impedance spectroscopy under physiological conditions, these monolayers exhibit significant changes in their electrochemical barrier properties upon application of electrical DC potentials below +400 mV with respect to a standard calomel electrode. We further found the impedance switching to be reversible under physiological conditions. Moreover, the impedance can be fine-tuned by changing the magnitude of the applied electrical potential. Before and during impedance switching at pH 7.4 in aqueous buffer solutions, the low-density monolayers showed good stability according to grazing angle infrared spectroscopy data. We anticipate low-density monolayers to be potentially useful model surfaces when designing active biointerfaces for cell-based studies or rechargeable biosensors.     

Smart functionalized thin gel layers for electrochemical sensors,biosensors and devices

Combining hydrogels sensitive to external stimuli with conducting surfaces opens new possibilities in electrochemistry. Thin hydrogel layers as unique electrode-modifying materials provide highly permeable matrix for easy diffusion of analytes. In addition, larger individuals, for example, nanoparticles and enzymes, can be straightforwardly immobilized in the polymeric networks at electrode surfaces. Such properties are strongly desired for construction of sensors and biosensors. In addition, sensitivity to external stimuli allows to significantly enhance or weaken the electroanalytical signal. Recently, a significant number of articles concerning switchable sensors/biosensors, switchable electrochemical systems and signal–responsive interfaces have been published. This report is also focused on the construction of various devices based on electrode surfaces modified with smart hydrogel layers, for example, logic gates and electroresponsive hydrogel layers as potentially advanced drug delivery systems, artificial muscles and electrochemical valves.     

Self‐Assembled Monolayers with Dynamicity Stemming from (Bio)Chemical Conversions: From Construction to Application

Surfaces with “dynamicity” whereby surface properties can be modulated by an external stimulus on user demand have been actively exploited for the past decade. These switchable surfaces with dynamic properties are widely used for a number of applications such as micro/nanoarrays, biomolecule immobilization, basic cell studies, and tissue engineering on a variety of materials. This minireview highlights the dynamic control of surface properties on self‐assembled monolayers and focuses on dynamicity that stems from (bio)chemical conversions achieved by electrical potentials, photoillumination, chemical reagents, enzymes, and pH.     

A single-molecule view of conformational switching of DNA tethered to a gold electrode

Surfaces that can actively regulate binding affinities or catalytic properties in response to external stimuli are a powerful means to probe and control the dynamic interactions between the cell and its microenvironment. Active surfaces also enable novel functionalities in biosensors and biomolecular separation technologies. Although electrical stimuli are often appealing due to their speed and localization, the operation of these electrically activated surfaces has mostly been characterized with techniques averaging over many molecules. Without a molecular-scale understanding of how biomolecules respond to electric fields, achieving the ultimate detection sensitivity or localized biological perturbation with the ultimate resolution would be difficult. Using electrochemical atomic force microscopy, we are able to follow the conformational changes of individual, short DNA molecules tethered to a gold electrode in response to an applied potential. Our study reveals conformations and dynamics that are difficult to infer from ensemble measurements: defects in the self-assembled monolayer (SAM) significantly perturb conformations and adsorption/desorption kinetics of surface-tethered DNA; on the other hand, the SAM may be actively molded by the DNA at different potentials. These results underscore the importance of characterizing the systems at the relevant length scale in the development of electrically switchable biofunctional surfaces.     

Multistate Structural Switching of [3]Catenanes with Cyclic Porphyrin Dimers by Complexation with Amine Ligands

Catenanes with multistate switchable properties are promising components for next-generation molecular machines and supramolecular materials. Herein, we report a ligand-controlled switching method, a novel method for the multistate switching of catenanes controlled by complexation with added amine ligands. To verify this method, a [3]catenane comprising cyclic porphyrin dimers with a rigid π-system has been synthesized. Owing to the rigidity, the relative positions among the cyclic components of the [3]catenane can be precisely controlled by complexation with various amine ligands. Moreover, ligand-controlled multistate switching affects the optical properties of the [3]catenanes: the emission intensity can be tuned by modulating the sizes and coordination numbers of integrated amine ligands. This work shows the utility of using organic ligands for the structural switching of catenanes, and will contribute to the further development of multistate switchable mechanically interlocked molecules.     

A Photoresponsive Smart Covalent Organic Framework

Ordered π‐columnar structures found in covalent organic frameworks (COFs) render them attractive as smart materials. However, external‐stimuli‐responsive COFs have not been explored. Here we report the design and synthesis of a photoresponsive COF with anthracene units as the photoresponsive π‐building blocks. The COF is switchable upon photoirradiation to yield a concavo‐convex polygon skeleton through the interlayer [4π+4π] cycloaddition of anthracene units stacked in the π‐columns. This cycloaddition reaction is thermally reversible; heating resets the anthracene layers and regenerates the COF. These external‐stimuli‐induced structural transformations are accompanied by profound changes in properties, including gas adsorption, π‐electronic function, and luminescence. The results suggest that COFs are useful for designing smart porous materials with properties that are controllable by external stimuli.     

Block copolymer micelles as switchable templates for nanofabrication

Block copolymer inverse micelles from polystyrene-block-poly-2-vinylpyridine (PS-b-P2VP) deposited as monolayer films onto surfaces show responsive behavior and are reversibly switchable between two states of different topography and surface chemistry. The as-coated films are in the form of arrays of nanoscale bumps, which can be transformed into arrays of nanoscale holes by switching through exposure to methanol. The use of these micellar films to act as switchable etch masks for the structuring of the underlying material to form either pillars or holes depending on the switching state is demonstrated.     

Swelling, functionalization, and structural changes of the nanoporous layered silicates AMH-3 and MCM-22

Nanoporous layered silicate materials contain 2D-planar sheets of nanoscopic thickness and ordered porous structure. In comparison to porous 3D-framework materials such as zeolites, they have advantages such as significantly increased surface area and decreased diffusion limitations because the layers can potentially be exfoliated or intercalated into polymers to form nanocomposite materials. These properties are particularly interesting for applications as materials for enhancing molecular selectivity and throughput in composite membranes. In this report, the swelling and surface modification chemistry of two attractive nanoporous layered silicate materials, AMH-3 and MCM-22, were studied. We first describe a method, using long-chain diamines instead of monoamines, for swelling of AMH-3 while preserving its pore structure to a greater extent during the swelling process. Then, we describe a stepwise functionalization method for functionalizing the layer surfaces of AMH-3 and MCM-22 via silane condensation reactions. The covalently attached hydrocarbon chain molecules increased the hydrophobicity of AMH-3 and MCM-22 layer surfaces and therefore allow the possibility of effectively dispersing these materials in polymer matrices for thin film/membrane applications.     

Poly(N-isopropylacrylamide)-based thermo-responsive surfaces with controllable cell adhesion

Poly(N-isopropylacrylamide) (PNIPAAm)-based thermo-responsive surfaces can switch their wettability (from wettable to non-wettable) and adhesion (from sticky to non-sticky) according to external temperature changes. These smart surfaces with switchable interfacial properties are playing increasingly important roles in a diverse range of biomedical applications; these controlling cell-adhesion behavior has shown great potential for tissue engineering and disease diagnostics. Herein we reviewed the recent progress of research on PNIPAAm-based thermo-responsive surfaces that can dynamically control cell adhesion behavior. The underlying response mechanisms and influencing factors for PNIPAAm-based surfaces to control cell adhesion are described first. Then, PNIPAAm-modified two-dimensional flat surfaces for cell-sheet engineering and PNIPAAm-modified three-dimensional nanostructured surfaces for diagnostics are summarized. We also provide a future perspective for the development of stimuli-responsive surfaces.     

Reversible UV-light-induced ultrahydrophobic-to-ultrahydrophilic transition in an alpha-Fe2O3 nanoflakes film

We describe a simple and robust approach to fabricating an alpha-Fe2O3 switchable surface. The hydrophobicity of alpha-Fe2O3 nanostructures was observed for the first time. A remarkable surface wettability transition can be easily achieved by ultraviolet (UV) illumination. The distinctive properties of surface defects are disclosed by X-ray photoelectron spectroscopy (XPS) analysis. The nanoscale adsorption and photocatalytic properties of Fe2+ defects account for the highly amphiphilic character of the surfaces. We believe that the experiment will further the molecular-scale understanding and manipulation of the wetting behavior on smart devices.     

Surface forces and friction tuned by thermo-responsive polymer films

Thermo-responsive polymer films have enabled the development of various functional surfaces with switchable interfacial properties. Assessing the surface forces and friction on such films is of paramount importance. On the one hand, it allows us to extract a great deal of information on the interfacial properties of the films, e.g., adhesiveness and lubricity, and how they could be tuned using different stimuli. On the other hand, surface force measurements complement other thin-film analysis methods, e.g., ellipsometry, to better perceive the correlation between the molecular properties of the polymer chains and the interfacial properties of the film. On this basis, we will, herein, provide a concise review of some recent studies on surface forces and friction tuned by thermo-responsive polymer films. This outline comprises a summary of several research works addressing the effects of temperature, solvent composition, and salts on surface forces and friction. In the end, we briefly discuss a few select studies in which the regulation of surface forces by thermo-responsive polymers is examined with an emphasis on the potential applications.     

Controlled switchable surface

The macroscopic properties of a surface can be intelligently controlled by alternating the states of the modified molecules, such as polymers, metallic oxide, or self-assembled monolayers (SAMs). This article reviews various approaches to create a switchable surface and different types of external stimuli used to switch the surface properties. This area is of potential benefit for biomaterials, biosensors, information storage, microfluidic systems, adhesive materials, nanolithography, and so on.     

Switching in Metal–Organic Frameworks

In recent years, metal–organic frameworks (MOFs) have become an area of intense research interest because of their adjustable pores and nearly limitless structural diversity deriving from the design of different organic linkers and metal structural building units (SBUs). Among the recent great challenges for scientists include switchable MOFs and their corresponding applications. Switchable MOFs are a type of smart material that undergo distinct, reversible, chemical changes in their structure upon exposure to external stimuli, yielding interesting technological applicability. Although the process of switching shares similarities with flexibility, very limited studies have been devoted specifically to switching, while a fairly large amount of research and a number of Reviews have covered flexibility in MOFs. This Review focuses on the properties and general design of switchable MOFs. The switching activity has been delineated based on the cause of the switching: light, spin crossover (SCO), redox, temperature, and wettability.     

Structure:function relationships in molecular spin-crossover complexes

Spin-crossover compounds are becoming increasingly popular for device and sensor applications, and in soft materials, that make use of their switchable colour, paramagnetism and conductivity. The de novo design of new solid spin-crossover compounds with pre-defined switching properties is desirable for application purposes. This challenging problem of crystal engineering requires an understanding of how the temperature and cooperativity of a spin-transition are influenced by the structure of the bulk material. Towards that end, this critical review presents a survey of molecular spin-crossover compounds with good availability of crystallographic data. A picture is emerging that changes in molecular shape between the high- and low-spin states, and the ability of a lattice to accommodate such changes, can play an important role in determining the existence and the cooperativity of a thermal spin-transition in the solid state (198 references).     

Multiscale modeling and simulations of protein adsorption: progresses and perspectives

Protein adsorption, which shows wide prospects in many practical applications such as biosensors, biofuel cells, and biomaterials, has long been identified as a very complex problem in interface science. Here, we present a review on the multiscale modeling and simulation methods of protein adsorption on surfaces with different properties. First, various simulation algorithms (replica exchange, metadynamics, TIGER2A, and PSOVina) and protein models (colloidal, coarse-grained, and all-atom models) are introduced. Then, recent molecular simulation progresses about protein adsorption on different material surfaces (such as charged, hydrophobic, hydrophilic, and responsive surfaces) are retrospected. It has been demonstrated that the adsorption orientation of proteins on charged surfaces and hydrophobic surfaces can be controlled by the electrical dipole and the hydrophobic dipole of proteins, respectively. Superhydrophilic zwitterionic surfaces can resist protein adsorption because of the strong hydration. Under the stimuli of external conditions, the surface properties of materials can be modulated, and thus, the adsorption/desorption of proteins on responsive surfaces can be controlled. Finally, the future directions of molecular simulation study of protein adsorption are discussed.     

Counterion exchange to achieve reversibly switchable hydrophobicity and oleophobicity on fabrics

We describe a simple layer-by-layer (LbL) technology and counterion exchange procedure to tune the liquid wettability of commercially available cotton fabrics. A polyelectrolyte multilayer is deposited on the fabric surface by the LbL technology, and counterion exchange is used to control the surface composition and thereby to modulate the solid surface energy. The tunability of the solid surface energy, along with the inherent re-entrant texture of the cotton fabric, results in simultaneously switchable wettability between a nonwetting state and a fully wetted state for water and hexadecane. This switchable hydrophobicity and oleophobicity can be explained within a robustness factor, which is a quantitative criterion for the transition between the two states. The counterion exchange can be confirmed by X-ray photoelectron spectroscopy analysis.     

Side‐Group‐Mediated Mechanical Conductance Switching in Molecular Junctions

A key target in molecular electronics has been molecules having switchable electrical properties. Switching between two electrical states has been demonstrated using such stimuli as light, electrochemical voltage, complexation and mechanical modulation. A classic example of the latter is the switching of 4,4′‐bipyridine, leading to conductance modulation of around 1 order of magnitude. Here, we describe the use of side‐group chemistry to control the properties of a single‐molecule electromechanical switch, which can be cycled between two conductance states by repeated compression and elongation. While bulky alkyl substituents inhibit the switching behavior, π‐conjugated side‐groups reinstate it. DFT calculations show that weak interactions between aryl moieties and the metallic electrodes are responsible for the observed phenomenon. This represents a significant expansion of the single‐molecule electronics “tool‐box” for the design of junctions with electromechanical properties.