Asymmetric chain-growth synthesis of polyisocyanide with chiral nickel precatalysts

Nickel(II)-aryl complexes [(L₂)Ni(Ar)Br] bearing either chiral phosphine ligands (L₂ = RR- or SS-DIPAMP, Ar = ortho-anisyl), or a chiral aryl-group have been prepared, and their structural optical an chiroptical properties have been characterized. Enantiomeric pairs of both catalysts have been used for the asymmetric polymerization of different isocyanides ( M1 , M2 , M3 ), to give well defined polyisocyanides ( P1 , P2 , P3 ). Their polymerization behavior has been studied, which confirmed chain-growth polymerization in all cases. The asymmetric induction has been verified by circular dichroism spectroscopy on enantiomeric pairs of all three polymers.     

Acidic peroxo salts: A new class of initiators for vinyl polymerization. III. Kinetics of polymerization of methyl methacrylate initiated by potassium monopersulfate catalyzed by Co(II)

Kinetics of the polymerization of methyl methacrylate by an acidic peroxo salt like potassium monopersulfate catalyzed by Co(II) have been investigated in aqueous medium, over the range of 35–50°C. The rates of polymerization (R_p) have been studied at various concentrations of monomer and initiator. The efficiencies of various metal salts in catalyzing the polymerization have been evaluated from the observed value of R_p. The effects of catalyst (CoSO₄), initiator, monomer, and various concentrations of FeCl₃ on R_p and percentage conversion have been studied. The end groups of the recovered polymers have been studied using standard methods. From the observed end groups and kinetic results, a reaction scheme has been proposed involving initiation by S O₄· or OH· radicals, generated by the interaction of the initiator with cobalt sulfate and termination of the polymer chains by mutual combination.     

Acidic peroxo salts. A new class of initiators for vinyl polymerization. I. Kinetics of polymerization of acrylonitrile initiated by potassium monopersulfate catalyzed by Ag(I)

The kinetics of polymerization of acrylonitrile initiated by KHSO₅ and catalyzed by Ag(I) have been investigated in an aqueous medium over the temperature range of 35–50°C. The rates of polymerization R_p have been calculated and studied with respect to monomer and initiator. The catalytic activity of various metal ions on the initiator has been determined from a comparison of R_p values. The effects of monomer, catalyst, neutral salts, various amines, and inhibitor (hydroquinone) on the initial rate as well as maximum conversion have been studied. From the kinetics results a suitable reaction scheme has been proposed.     

Effect of reaction medium on copolymerization of acrylonitrile and methyl acrylate

The copolymerization of acrylonitrile (AN) with methyl acrylate (MEA) has been investigated in three types of polymerization, i.e., emulsion polymerization in water with a water-soluble initiator, suspension polymerization in water with an oil-soluble and water-insoluble initiator, and solution polymerization in dimethyl sulfoxide (DMSO). Monomer reactivity ratios at 50°C. for AN and MEA are found to be r₁ = 0.78 ± 0.02, r₂ = 1.04 ± 0.02 in emulsion polymerization; r₁ = 1.02 ± 0.02, r₂ = 0.70 ± 0.02 in DMSO solution polymerization; r₁ = 0.75 ± 0.05, r₂ = 1.54 ± 0.05 in suspension polymerization. The large differences found in the reactivity ratios may be attributed to the different ratio of concentration of two monomers in the loci of polymerization. Chemically, AN is somewhat more reactive than MEA as shown by the reactivity ratios in DMSO. In the case of the suspension polymerization, the MEA/AN ratio in the polymer particles in which polymerization occurs may be higher than that in the total phase. Experimental results of the emulsion polymerization show that the emulsion polymerization of AN occurs both in the particles and in water. In addition, rates of the copolymerization of AN with MEA have also been investigated.     

Solid-state polymerization of acrylamide and its derivatives complexed with some lewis acids. II. Radiation-induced in-source polymerization

Radiation-induced solid-state polymerizations of complexes of N-tert-butylacrylamide, N-tert-amylacrylamide, and N-tert-hexylacrylamide with zinc chloride and zinc bromide have been studied. An accelerating effect of temperature and an inhibiting effect of oxygen on the polymerization process were observed. The activation energies have been established. The influence of monomer structure as well as the halide used on the polymerization rate have been discussed and some regularities have been pointed out. The polymers obtained show good solubilities in common solvents, which proves that they are not crosslinked.     

A kinetic study of the polymerization of pure meta-divinylbenzene and pure para-divinylbenzene

The kinetics of the polymerization of pure meta-divinylbenzene (DVB) and pure para-divinylbenzene at 70°C have been studied in the presence of toluene and 2-ethylhexanoic acid. The apparent rate constant ratios (k_p/k_t)^1/2 for these systems have been calculated. meta-Divinylbenzene polymerizes at a higher rate than the para-isomer in both toluene and 2-EHA, and the polymerization rates of meta-DVB and para-DVB before the gel point were both higher in the presence of 2-EHA than in toluene. The monomer conversion at the visual gel point is higher for para-DVB than for meta-DVB. The gel point has also been determined indirectly by size exclusion chromatography, and these results are consistent with the gel times observed visually. The conversion of pendant vinyl groups during the polymerization has been determined by bromination. It is found that the homopolymers of poly(para-DVB) have a substantially higher content of pendant vinyl groups than poly(meta-DVB) both during and at the end of the polymerization. The molecular weight distribution (MWD) prior to gelation has been determined by size exclusion chromatography (SEC). Weight average (M̄_w); and number average (M̄_n) molecular weight prior to gelation and of the sol fractions after gelation have also been measured by SEC. There are larger fractions of high molecular weight polymers prior to gelation, when the polymerization was run in the presence of toluene, than in 2-EHA, mainly due to the differences in solvating power of the two diluents. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3345–3359, 1999     

Vinyl polymerization initiated by peroxydiphosphate. XII. Polymerization of acrylamide and acrylic acid by peroxydiphosphate–sodium thiosulfate redox system

The aqueous polymerization of acrylic acid and acrylamide initiated by peroxydiphosphate–sodium thiosulfate redox system was investigated within the temperature range of 25–35°C. The rates of polymerization were measured at different concentrations of oxidant, activator and monomer. The monomer and the initiator exponents were evaluated to be 1.12 and 0.51. The rate of polymerization decreases with increasing thiosulfate concentration. On the basis of the experimental observation of the dependence of the rate of polymerization, R_p, on various variables, a suitable kinetic scheme has been proposed and the rate parameters have been evaluated.     

Kinetics of retarded polymerization: Investigation of the retardation of V5+–thiourea initiated polymerization of methyl acrylate by phenol

The kinetics and mechanism of the retarding action of phenol on the V⁵⁺–thiourea initiated polymerization of methyl acrylate (MA) have been studied within the temperature range of 30–50°C. The effects of retarder (phenol), metal ion (V⁵⁺), monomer (MA), sulfuric acid, some organic solvents and inorganic salts on the percentage and rate of polymerization have been studied. The remarkable observation of the present study is the positive intercept obtained from the plot of [M]/R_p vs. 1/[M]. This type of observation is significantly different from previous studies on retarded polymerization. The values of composite rate constants k₀k_t/k_ik_pkK have been calculated from plots of [M]/R_p vs. 1/[M]. On the basis of experimental findings a reaction mechanism has been suggested, and a suitable rate expression has been proposed and explained.     

On the polymerization reactivity of fluorinated vinyl monomers

The polymerization reactivities of α,β,β‐trifluorovinyl compounds (CF₂=CF—R) and α‐trifluoromethylvinyl compounds (CH₂=C(CF₃)—R) are discussed since these monomers have scarcely been investigated and hardly yielded corresponding homopolymers, although tetrafluoroethylene and chlorotrifluoroethylene have been studied under radical polymerization conditions. In the case of α,β,β‐trifluorostyrene, a homopolymer is obtained in low yields by anionic polymerization and it is concluded that the reaction takes place without any side reactions once the reaction has started, since simple addition polymerization is observed and the molecular weight distribution is very narrow. Anionic polymerization of hexafluorobuta‐1,3‐diene is successfully achieved by the addition reaction of living end to the 2‐carbon of hexafluorobuta‐1,3‐diene followed by isomerization to produce excellently high thermostable polymers. ω‐Trifluorovinyloxyfluoroalkyl alcohol produces a polyether via a polyaddition reaction under anionic conditions. The homopolymers of α‐trifluoromethylacrylates are quantitatively obtained under anionic polymerization conditions. α‐Trifluoromethylstyrene derivatives are likely to polymerize under radical conditions, but are not well‐studied. The radical polyaddition reaction of perfluoroisopropenyl esters in 1,4‐dioxane, diethyl ether or 1,2‐dimethoxyethane yields the polymers possessing the solvent moiety in the polymer main chain, respectively. It is clearly demonstrated that each fluorinated vinyl monomer discussed in this article demands its own reaction conditions. Therefore, more experimental data on the polymerization of these individual monomers is needed, including research on developing the reactions discovered in the organofluorine chemistry field to the preparation of polymers.     

Polymeric nanocomposites containing polyhedral oligomeric silsesquioxanes prepared via frontal polymerization

Frontal polymerization (FP) has been successfully applied, for the first time, to obtain polymeric nanocomposites containing polyhedral oligomeric silsesquioxanes (POSS) in an amine‐cured epoxy matrix. Variations of maximum temperature (T_max) and front velocity (V_f) have been studied. A comparison of these products with the corresponding materials, obtained by the classical batch polymerization technique, demonstrated that FP allows a higher degree of conversion than batch polymerization. The products have been characterized in terms of their thermal behavior with DSC analysis. SEM and X‐ray analyses revealed the morphology and the structures of the nanocomposites. The nanocomposites obtained by FP have the same characteristics of those synthesized, in much longer times, by batch polymerization. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4514–4521, 2007     

Mechanism of N-vinylcarbazole polymerization on Co(II)–13X molecular sieve

Kinetics of polymerization of N-vinylcarbazole over Co(II)-13X molecular sieves in toluene have been studied. The rate of polymerization (R_p) has been found to be second order with respect to percent exchange level of Co(II) and also to the NVC concentration at all the reaction temperatures of 40, 50 and 60°C. The rate increases with decreasing pH of the original exchanging salt solution up to a pH of about 3.5, beyond which it falls. The overall activation energy of polymerization has been found to decrease with increase in monomer concentration, exchange level of Co(II), and the hydrogen ion concentration of the original exchange solution. Average degree of polymerization also follows a similar trend. A mechanism of polymerization involving simultaneous propagation on both metal ion Co(II) and proton on a zeolite surface has been suggested. The two propagation routes are characterized by an average activation energy of 10.36 kcal/mol and 5.40 kcal/mol on the metal ion and proton centers, respectively.     

Polymerization of N-(fluoro phenyl) maleimides

Poly(N-aryl maleimide)s of characteristic structures have been synthesized and some of their physical properties studied. These include N-(2-fluoro phenyl), N-(3-fluoro phenyl), N-(4-fluoro phenyl), N-(2,4-difluoro phenyl), N-(2,5-difluoro phenyl), N-(2,3,5,6-tetrafluoro phenyl), and N-(pentafluoro phenyl). The polymerization of N-(fluoro phenyl) maleimides by free-radical initiation in bulk or in solution and by anionic catalyst have been studied to compare the characteristics of polymerization by γ-ray irradiation with that by free-radical initiation. The polymers were characterized by elemental analysis, intrinsic viscosity, spectroscopy (IR and NMR), programmed thermogravimetric analysis, and x-ray diffraction. Spectra of polymers prepared by radiation and anionic polymerization were nearly identical with those of polymers prepared by free-radical polymerization initiated by AIBN in bulk or in solution and by the self-initiated thermal polymerization. A variety of reaction conditions were tried, but all attempts to change the molecular structure of the polymers were unsuccessful. Rates of thermal degradation for poly[N-(fluoro phenyl) maleimide]s have been analyzed by using a multiple-heating-rate procedure. Overall activation energy, order of reaction, and frequency factor have been evaluated. On the basis of the comparison between the overall activation energy of the thermal degradation of poly[N-(fluoro phenyl) maleimide]s and NMR spectra of their corresponding monomers, it can be concluded that the ¹H shifts due to ethylenic protons are so characteristic in sign and magnitude as to be useful in thermal stability elucidation. Some qualitative explanations were given on the stability of these polymers as affected by the type and size of the substituent. The x-ray diffractograms of all samples show two rather broad peaks indicative of noncrystalline structures. The location of the peaks does not depend upon preparation conditions and temperature. Poly(N-maleimide)s of fluoroanilines have not been hitherto described.     

Polymerization of acrylonitrile. Kinetics of the reaction initiated by the Ce(IV)/thioacetamide redox system

Vinyl polymerization of acrylonitrile initiated by the Ce(IV)/thioacetamide redox system has been investigated in aqueous sulfuric acid in the temperature range of 10–20°C. The rate of polymerization (R_p) and the rate of Ce(IV) disappearance (?R_Ce) were measured. The effect of certain water-soluble organic solvents, added electrolytes, and aromatic and heterocyclic organic nitrogen compounds on the rate of polymerization has been investigated. Depending on the experimental results, we have suggested a suitable reaction scheme for the system which involves the production of initiating radicals from the oxidation of thioacetamide (TAm) by ceric ion and the termination of the polymer chain by metal ions.     

Anionic polymerization of N-ethyl-2-vinylcarbazole and N-ethyl-3-vinylcarbazole

The polymerization of N-ethyl-2-vinylcarbazole and N-ethyl-3-vinylcarbazole by an anionic mechanism has been demonstrated. Polymerization reactions were monitored by ultraviolet/visible spectroscopy and λ_max and ε values for the propagating carbanions determined. The 2-vinyl monomer exhibits all the features of a standard “living” polymer; the carbanion is stable at ambient temperatures and high molecular weight, M?_n ? 10⁶, narrow distribution polymers and block copolymers with styrene have been prepared. The carbanion from the 3-vinyl monomer is much less stable and a clean polymerization can only be conducted at temperatures below -60°C. A comparison of the anionic polymerization characteristics of the N-, 2-, and 3-vinyl carbazole monomer series is presented.     

Hydrophilic magnetic polymer latexes. 2. Encapsulation of adsorbed iron oxide nanoparticles

The encapsulation of seed polymer particles coated by anionic iron oxide nanoparticles has been investigated using N-isopropylacrylamide as a main monomer, N,N-methylene bisacrylamide as a crosslinking agent, itaconic acid as a functional monomer and potassium persulfate as an anionic initiator. The magnetic latexes obtained have been characterized with regard to particle size, iron oxide content and electrophoretic mobility. All these properties have been examined by varying several polymerization parameters: reaction medium, monomer(s) and crosslinking agent concentrations, nature of seed latexes and type of polymerization (batch versus shot process). The magnetic content in the polymer microspheres strongly depends on the polymerization procedure (i.e., encapsulation process) and varies between 6 and 23 wt%, and monodisperse magnetic polymer particles were obtained. Received: 28 December 1999 Accepted in revised form: 15 June 1999     

4-N,N-Dimethylamino-4'-Isopropylbenzophenone as polymerization photoinitiator. Effect of solvent and photoinitiator concentration on its photoreactivity and on the polymerization process

Several kinetics aspects of the methyl methacrylate (MMA) polymerization using 4-dimethylamino-4'-isopropylbenzophenone (PI) as photoinitiator have been studied. The order of the polymerization reaction with respect to monomer and initiator concentrations have been investigated, as well as the polymerization behavior under well-stirred and unstirred conditions; values of initiation quantum yield (?_i) and k_p/k_t^1/2 have also been determined. It has been found that the nature of the polymerization-initiating radicals depends on the type of solvent and the photoinitiator concentration ([PI]). In cyclohexane solution and at low [PI] (< 5 x 10^-5M), the cyclohexyl radical is practically the only polymerization initiating radical, while at higher [PI] both radicals, cyclohexyl and the aminoalkyl derived from PI, participate in the initiation step, increasing the participation of the later as the [PI] increases. When benzene is used as solvent both phenyl and aminoalkyl radicals participate in the initiation step at any [PI] employed. Efficiencies of the radicals derived from solvent and photoinitiator have been determined.     

A new microwave dielectric method for studying photoinitiated chain radical polymerization processes

Measurements of both real and imaginary parts of the dielectric constant at a fixed microwave frequency have been performed on n-butyl acrylate/poly(n-butyl acrylate) mixtures. The dielectric constant of the mixtures has been compared with that of neat n-butyl acrylate during UV photoinitiated polymerization. The values of the imaginary part of the dielectric constant thus obtained have allowed determination of the instantaneous monomer concentration and verified the kinetic equation for the photoinitiated polymerization process. The limits of validity of the method as well as its capability of providing detailed kinetic information are also discussed.     

Mechanism of charge–transfer polymerization. II. Propagation mechanism of the polymerization of N-vinylcarbazole with organic electron acceptors

Copolymerizations of N-vinylcarbazole with both isobutyl vinyl ether and N-vinyl-pyrrolidone initiated by some organic electron acceptors have been investigated for the purpose of elucidating the propagation mechanism in the charge-transfer polymerization. Copolymerizations of the same system catalyzed by authentic cationic catalysts have also been made for comparison. The results indicate that the propagation mechanism of the charge-transfer polymerization studied is catio ie.     

Living carbocationic polymerization. LXII. Living polymerization of styrene,p-methylstyrene and p-chlorostyrene induced by the common ion effect

The effect of common anion producing salt, tetrabutylammonium chloride (n-Bu₄NCl), on the livingness and kinetics of styrene (St), p-chlorostyrene (pClSt), and p-methylstyrene (pMeSt) polymerization initiated by the 2-chloro-2,4,4-trimethylpentane (TMPCl)/TiCl₄ system has been investigated. Uncontrolled (conventional) carbocationic polymerization of St and p MeSt can be converted to living polymerization by the use of n-Bu₄NCl. Under similar conditions the polymerization of p ClSt is living even in the absence of n-Bu₄NCl, although the molecular weight distribution (MWD) of the polymer becomes narrower in the presence of this salt. The apparent rates of polymerizations decrease in the presence of n-Bu₄NCl in proportion with the concentration of the salt. The rate of living polymerization of p ClSt is noticeably lower than that of St, while that of p MeSt is higher. The apparent rate constants, k_p^A, of these polymerizations have been determined, and the effects of the electron donating p Me- and electron withdrawing p Cl-substituents relative to the rate of St polymerization have been analyzed. [For part LXI, see J. Si and J. P. Kennedy, Polym. Bull., 33 , 651 (1994)]. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3341–3347, 1997     

Polymerization of acrylic acid initiated by a hexavalent chromium-organic sulfur compounds reducing agent system

The kinetics of polymerization of acrylic acid initiated by Cr⁶⁺-thiourea, Cr⁶⁺-thioacetamide, Cr⁶⁺-2-aminoethane thiol, Cr⁶⁺-cysteine, and Cr⁶⁺-thioglycollic acid have been studied at 30, 35, and 40°C in nitrogen. The rates of polymerization were measured. Chromic acid alone did not initiate the polymerization under deaerated and un-deaerated conditions. On the basis of the experimental observation of the dependence of the rate of polymerization R_p on various variables, a suitable kinetic scheme is proposed.