Mechanism of charge-transfer polymerization. V. Photopolymerization and photocyclodimerization of N-vinylcarbazole in the N-vinylcarbazole–oxygen–solvent system

Photochemical reactions of N-vinylcarbazole (VCZ), studied in various solvents, were profoundly influenced by the atmosphere. In the deaerated system radical polymerization of VCZ occurred in various solvents, e.g., tetrahydrofuran, acetone, ethyl methyl ketone, acetonitrile, methanol, sulfolane, N,N-dimethylformamide (DMF), or dimethyl sulfoxide (DMSO). By contrast, when dissolved oxygen was present, cyclodimerization of VCZ occurred exclusively to give trans-1,2-dicarbazole-9-yl-cyclobutane in such polar, basic solvents as acetone, ethyl methyl ketone, acetonitrile or methanol. In stronger basic solvents, i.e., sulfolane, DMF, or DMSO, simultaneous radical polymerization and cyclodimerization of VCZ proceeded, the ratio of the cyclodimerization to the radical polymerization decreasing in the order, sulfolane > DMF > DMSO. In dichloromethane, on the other hand, cationic polymerization of VCZ occurred irrespective of the atmosphere. It is suggested that oxygen acts as an electron acceptor to the excited VCZ, electron transfer occurring in polar solvents from the excited VCZ to oxygen to give transient VCZ cation radical. The effect of solvent basicity on the photocyclodimerization of VCZ is discussed.     

Photo and thermal polymerization sensitized by donor–acceptor interaction. I. N-vinyl-carbazole–acrylonitrile and related systems

Spontaneous photo and thermal polymerization of N-vinylcarbazole (VCZ)–acrylonitrile (AN), VCZ–acetonitrile, AN-N-ethylcarbazole, and AN-ferrocene were studied. These combinations of electron donor with acceptor were thermally rather stable but showed prominent photopolymerizability when the systems were irradiated by near ultraviolet light. The VCZ–AN system showed multireactivity producing VCZ polymer and a copolymer of VCZ with AN. The composition of copolymer was approximately the same as that of polymer produced in radical copolymerization. The effects of additives (DPPH, NH₃, H₂O, air) indicated simultaneous occurrence of cationic and radical polymerization in the AN–VCZ and acetonitrile–VCZ systems. The results were interpreted on the assumption of initial formation of a cation radical–anion radical pair. The ratio of cationic to radical polymerization differed for photo and thermal polymerization. In no case was anionic polymerization detected.     

Effect of metal salts on polymerization. Part I. Polymerization of vinylpyridine initiated with cupric acetate

The polymerization of vinylpyridine initiated by cupric acetate has been studied. The rate of polymerization was greatly affected by the nature of the solvent. In general polar solvents increased the rate of polymerization. Polymerization was particularly rapid in water, acetone, and methanol. The initial rate of polymerization of 4-vinylpyridine (4-VP) in a methanol–pyridine mixture at 50°C. is R_p = 6.95 × 10^?6[Cu¹¹]^1/2 [4-VP]² l./mole-sec. The activation energy of initiation by cupric acetate is 5.4 ± 1.6 kcal./mole. Polymerization of 2-vinylpyridine and 2-methyl-5-vinylpyridine with the same initiator was much slower than that of 4-VP. Dependence of R_p on monomer structure and solvent is discussed. Kinetic and spectroscopic studies led to the conclusion that the polymerization of 4-VP is initiated by one electron transfer from the monomer to cupric acetate in a complex having the structure, (4-VP)₂Cu(CH₃COO)₂.     

Photoreactions of N-vinylcarbazole induced by metal salts. II. Further studies on the photocationic polymerization sensitized by sodium chloroaurate(III) in nitrobenzene

Further investigations of the photopolymerization of N-vinylcarbazole(VCZ) sensitized by sodium chloroaurate(III) in nitrobenzene were undertaken under irradiation of near-ultraviolet light at 30°C. Copolymerization with isobutyl vinyl ether and the kinetic behavior of polymerization were studied. These propagation and chain-breaking features were discussed in comparison with those obtained in the thermal polymerization. Electron spin resonance spectroscopy was conducted at 77°K in various systems.     

Effects of metal salts on polymerization. Part V: Polymerization of N-vinylcarbazole initiated by sodium chloroaurate

The polymerization of N-vinylcarbazole (VCZ) initiated by sodium chloroaurate (NaAuCl₄·2H₂O) in nitrobenzene was studied at 30°C. The rate of polymerization (R_p) is proportional to [Au^III] [VCZ] after a short induction period. When reducing agents (ascorbic acid, ferrocene, or mercury metal) are added to the system, the rate of polymerization in the dark increases. The R_p is relatively unaffected by addition of water and N-ethylcarbazole, but the polymerization is completely inhibited in the presence of ammonia. Oxygen and DPPH act as neither inhibitors nor retarders. Kinetic treatments based on the assumption that the active initiating species is Au^II produced by reduction of Au^III by VCZ and other reducing agents explain the experimental results very well.     

STUDIES ON THE INITIATION MECHANISM OF CERIC ION AND ACETYLACETONE REDOX SYSTEM IN VINYL POLYMERIZATION

The initiation mechanism of acrylamide (AAM)polymerization using ceric ion/acetylacetone system as an initiator has been studied. The redox polymerization was revealed by the low value of overall activation energy of AAm polymerization. The structure of free radicals formed from above-mentioned initiation sytem were detected by radical trapping and ESR spectra techniques and the end groups of polymers obtained were determined by FT-IR spectra analysis method. Based on these results the initiation mechanism is proposed.     

Radical/Cation Transformation Polymerization and Its Application to the Preparation of Block Copolymers

Abstract

ESR study on the primary radicals obtained by decomposition of azo-compounds showed that primary radicals with electron donating substituents were transformed to the corresponding cations in the presence of electron acceptors such as ph₂I⁺PF^? ₆. Accordingly, propagating radicals are transformed to the corresponding cations in the polymerization of p-methoxy-styrene (MOS), n-butyl vinyl ether (BVE), and N-vinylcarbazole (VCZ) with azoinitiators such as AIBN in the presence of electron acceptors such as Ph₂I⁺PF^? ₆. In the case of BVE, the polymer formation was caused by cationic species produced by the transformation of the initiating radical. The polymerizations of MOS and VCZ were ascribed to the transformation of the growing radical to the corresponding cation during the propagation step which was classified as the radical/cation transformation polymerization. Block copolymers of MOS/cyclohexene oxide (CHO) and VCZ/CHO were effectively prepared by the radical/cation transformation polymerization of the appropriate monomers in the presence of AIBN, electron acceptor and CHO. The formation of block copolymers was characterized by turbidimetry, thin-layer chromatography, and solubility tests.     

Photopolymerization of 1,6‐hexanedioldiacrylate initiated by three‐component systems based on N‐arylphthalimides

Three‐component photoinitiators comprised of an N‐arylphthalimide, a diarylketone, and a tertiary amine were investigated for their initiation efficiency of acrylate polymerization. The use of an electron‐deficient N‐arylphthalimide resulted in a greater acrylate polymerization rate than an electron‐rich N‐arylphthalimide. Triplet energies of each N‐arylphthalimide, determined from their phosphorescence spectra, and the respective rate constants for triplet quenching by the N‐arylphthalimide derivatives (acquired via laser flash photolysis) indicated that an electron–proton transfer from an intermediate radical species to the N‐arylphthalimide (not energy transfer from triplet sensitization) is responsible for generating the initiating radicals under the conditions and species concentrations used for polymerization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4009–4015, 2004     

Photochemical reactions of N-vinylcarbazole in the binary solvent of benzonitrile and nitrobenzene

Photochemical reactions of N-vinylcarbazole (VCZ) in the binary solvent of benzonitrile (?CN) and nitrobenzene (?NO₂) were investigated. Both solvent and oxygen effects on the final products were examined. Benzonitrile and nitrobenzene behaved differently in the photochemical reaction of VCZ. At higher concentrations of benzonitrile in the aerated system, cyclodimerization was favored and it was inhibited by a cation scavenger and retarded by a radical scavenger. Polymerization occurred in the deaerated system and was inhibited by a radical scavenger and not by a cation scavenger. Using picosecond laser photolysis it was concluded that cyclodimerization occurs through the diffusion-controlled encounter collision of the excited singlet state of VCZ with an oxygen molecule, producing the VCZ cation radical and oxygen anion radical, and that this oxygen anion radical plays a very important role in the cyclodimerization of VCZ. It was also suggested that radical polymerization in the deaerated system is initiated by the excited triplet state of VCZ. On the other hand, at higher concentrations of nitrobenzene, only cationic polymerization took place irrespective of the presence of oxygen, and it was suggested that a contact charge-transfer complex is produced by the mixing of VCZ with ?NO₂ producing VCZ cation radical and NO₂ anion radical by an excited-state electron transfer.     

Effects of metal salts on polymerization. VI. Photo and thermally catalyzed polymerization of N-vinylimidazole in the presence of metal salts

Polymerization of 2-methyl-1-vinylimidazole (MVI) and 2-ethyl-1-vinylimidazole (EVI) was found to be markedly photosensitized in the presence of oxidizing metal salts such as UO₂(NO₃)₂, Ce(NH₄)₂(NO₃)₆, Hg(CH₃COO)₂, AgNO₃; non-oxidizing metal salts such as Zn^II did not act as photosensitizers. The interaction of monomer with a metal salt is discussed on the basis of infrared and electronic spectroscopy. This photopolymerization is very specific with respect to the kind of monomer. The polymerization of noncomplexing monomer (styrene) is not photosensitized by these metal salts. Consequently, photosensitized electron transfer between monomer and metal salt via complex formation is considered to be the most probable initiation mechanism. Cupric acetate and sodium chlorolaurate, which have been reported as efficient initiators for the polymerization of vinylpyridine and N-vinylcarbazole, respectively, act as linear terminators of growing radicals. The radical polymerizability of the zinc complex of MVI was studied by means of copolymerization with styrene. The reduction of the reactivity of MVI on complexing was explained by correlating with the spectroscopic observations. Because the polymerization system is heterogeneous, a detailed discussion was not possible.     

GRAFT POLYMERIZATION OF ACRYLAMIDE ONTO HOMOPOLYMER OF 5-METHYL-5-HEXEN-2, 4-DIONE INITIATED BY CERIC ION

The homopolymerization of 5-methyl-5-hexen-2, 4-dione (methacryloylacetone, MAA),a vinyl monomer having β-diketone group, was carried out in the presence of benzophe-none (BP)/N N-dimenthyl-4-toluidine (DMT) system. Graft polymerization of acrylamideinitiated by ceric ion onto the homopolymer film was investigated and the mechanism ofthe grafting reaction was proposed on the basis of ESR study. The grafted copolymer wascharacterized by means of grafting percentage, water absorption, XPS spectra and scanningelectron photomicrographs.     

GRAFTING OF ACRYLAMIDE ONTO SURFACE OF COPOLYMERS CONTAINING P-TOLYLCARBAMOYL PENDANT GROUP INITIATED WITH CERIC SALT

Two copolymers containing p-tolylcarbamoyl pendant group poly (MAMT-co-VAc) and poly(MAMT-co-MA) were synthesized f and the graft copolymerization of AAM onto these two func-tional copolymers films initiated with ceric salt were carried out in aqueous solution for variousperiods at 30℃. The formation of graft copolymer was verified by water absorption, ESCA andSEM photographs. Based on the results of the study of the initiation mechanism of model com-pounds and ceric salt systems, the reaction mechanism of the graft copolymerization initiated withceric salt was proposed.     

Synthesis of ultrahigh molecular weight poly(N‐vinylcarbazole) with a high yield using low‐temperature heterogeneous‐solution polymerization

To prepare ultrahigh molecular weight (UHMW) poly(N‐vinylcarbazole) (PVCZ) with a high conversion, I heterogeneous‐solution‐polymerized N‐vinylcarbazole (VCZ) in methanol/tertiary butyl alcohol (TBA) at 25, 35, and 45 °C with a low‐temperature initiator, 2,2′‐azobis(2,4‐dimethylvaleronitrile) (ADMVN), and I investigated the effects of the polymerization conditions on the polymerization behavior and molecular parameters of PVCZ. A low‐polymerization temperature with ADMVN, a heterogeneous system with methanol, and a low chain transfer with TBA proved to be successful in obtaining PVCZ of UHMW [weight‐average molecular weight (M_w) > 3,000,000] and high conversion (>80%) with a smaller temperature rise during polymerization but still of free‐radical polymerization by an azoinitiator. The polymerization rate of VCZ in methanol/TBA at 25 °C was proportional to the 0.97 power of the ADMVN concentration, indicating a heterogeneous nature for the polymerization. The molecular weight was higher and the molecular weight distribution was narrower with PVCZ polymerized at lower temperatures. For PVCZ produced in methanol/TBA at 25 °C with an ADMVN concentration of 0.0001 mol/mol of VCZ, an M_w of 3,230,000 was obtained, with a polydispersity index of 2.4. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 539–545, 2001     

Relationship between reduction of ceric ion with poly(vinyl alcohol) and graft copolymerization

Various poly(vinyl alcohol) samples were preliminarily subjected to oxidation treatment with sodium hypochlorite, and the reduction of ceric ion and subsequently initiation in the graft copolymerization in the system containing methyl methacrylate were investigated. The reduction behavior of ceric ion could be subdivided into three parts, each of different reaction rate. In the initial stage of the reaction, there was observed rapid cleavage of the backbone chain of poly(vinyl alcohol) with ceric salts. The amount A of cleavage was proportional to the amount of ceric ion reduced at the initial fastest rate for various samples of different extents of oxidation; cleavage of 1 mole required ca. 10 moles of reduction of ceric ion. Higher carbonyl contents of the sample caused increased A. Graft polymerization was carried out in the same system with the addition of the monomer. The amounts of grafted chains produced were determined, and approximately one mole of grafted chains was obtained for per mole of cleavage. The copolymer is concluded to be blocklike in structure. The contribution of the carbonyl groups in poly(vinyl alcohol) sample to the initiation of the polymerization should be emphasized.     

Isomerization of triphenylmethoxyl and 1,1-diphenylethoxyl radicals. Revised assignment of the electron-spin resonance spectra of purported intermediates formed during the ceric ammonium nitrate mediated photooxidation of aryl carbinols

Grossi and Strazzari have reported (J. Org. Chem. 2000, 65, 2748-2754) that the ceric ammonium nitrate modulated photooxidation of triphenylmethanol and 1,1-diphenylethanol yielded ESR spectra of the putative spiro-cyclohexadienyl intermediates in the O-neophyl rearrangements of the corresponding alkoxyl radicals, Ph2(R)CO* (R = Ph, CH3), to the phenoxymethyl radicals, Ph(R)C*OPh. Both ESR spectra are reassigned to the phenoxyl radical, C6H5O*, and the probable mechanism by which phenoxyl is formed in these systems is presented.     

Ceric-initiated polymerization onto polyacrylonitrile with carbohydrate end groups. Graft versus block copolymer formation

Starch-g-polyacrylonitrile (starch-g-PAN) copolymers were prepared by ceric ammonium nitrate initiation, and the major portion of the starch in these graft copolymers was then removed by acid hydrolysis to yield PAN with oligosaccharide end groups. Although these PAN-oligosaccharide samples reacted with methyl methacrylate in the presence of ceric ammonium nitrate, the resulting products were largely graft copolymers rather than the expected PAN-poly(methyl methacrylate) (PMMA) block copolymers. The following evidence is presented for a PAN-g-PMMA structure: (i) PAN without oligosaccharide end groups also produced a copolymer with methyl methacrylate under our reaction conditions. (ii) Starch-g-PAN (51 or 37% add-on) was a less reactive substrate toward ceric-initiated polymerization than PAN with oligosaccharide end groups. (iii) Low-add-on (18%) starch-g-PAN reacted with methyl methacrylate to give a final graft copolymer in which a large percentage of PMMA was grafted to the PAN component rather than to starch.     

Magnetic field effect on an exciplex between N-vinyl carbazole grafted on cellulose acetate film and 1,4-dicyanobenzene

The present work emphasises the investigation of photoinduced electron transfer reaction between an electron-donor fluorophore, N-vinyl carbazole (VCZ), grafted on a polymeric cellulose acetate film and an electron-acceptor, 1,4-dicyanobenzene, in the presence of an external magnetic field that serves as a powerful tool to identify the spin states where the initial electron transfer occurs and to modulate the course of the reaction as desire. Here initial electron transfer occurs in the singlet spin state, and the formation of exciplex increases in the presence of magnetic field. The maximum field effect is obtained in the solvent with medium dielectric constant (ε_max) around 8.0. The ε_max value indicates that the extent of charge transfer in this exciplex is less compared to other similar systems studied so far, owing to the characteristic binding of VCZ to the polymeric backbone through oxygen atom. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3910–3915, 1999     

Graft polymerization kinetics of acrylamide initiated by ceric nitrate–dextran redox systems

The kinetics of the graft polymerization of acrylamide initiated by ceric nitrate—dextran polymeric redox systems was studied primarily at 25°C. Following an initial period of relatively fast reaction, the rate of polymerization is first-order with respect to the concentrations of monomer and dextran and independent of the ceric ion concentration. The equilibrium constant for ceric ion—dextran complexation K is 3.0 ± 1.6 l./mole, the specific rate of dissociation of the complex, k_d, is 3.0 ± 1.2 × 10^?4 sec.^?1, and the ratio of polymerization rate constants, k_p/k_t, is 0.44 ± 0.15. The number-average degree of polymerization is directly proportional to the ratio of the initial concentrations of monomer and ceric ion and increases exponentially with increasing extent of conversion. The initial rapid rate of polymerization is accounted for by the high reactivity of ceric ion with cis-glycol groups on the ends of the dextran chains. The polymerization in the slower period that follows is initiated by the breakdown of coordination complexes of ceric ions with secondary alcohols on the dextran chain and terminated by redox reaction with uncomplexed ceric ions.     

苯甲醛及其衍生物对铈离子存在下丙烯酰胺聚合的影响

<正> 虽然Santappa等早已报道Ce~(4+)(高氯酸铈)/甲醛体系能引发丙烯腈(AN)、甲基丙烯酸甲酯(MMA)的聚合,但对醛的活性以及参与引发单体聚合的自由基都未有详细报道,近来孙燕慧等发现脂肪醛能显著促进Ce~(4+)(硝酸铈铵CAN)引发丙烯酰胺(AAM)的聚合,而且醛的活性远大于相应的醇。至于芳香醛对于Ce~(4+)引发烯类单体的聚合的影响也未见详细报道。本文扼要报道苯甲醛(BA)及其衍生物对-硝基苯甲醛(PNBA)、间-硝基苯甲醛(MNBA)、间-溴苯甲醛(MBBA)、对-氯苯甲醛(PCBA)对Ce~(4+)(CAN)存在下丙烯酰胺聚合的影响,测定了其聚合速率,以UV吸收光谱、ESR波谱测定     

Inhibited Polymerization of N,N,N-Trimethylammonioethyl Methacrylate Methyl Sulfate

The kinetic features of initiation of N,N,N-trimethylammonioethyl methacrylate methyl sulfate polymerization in the presence of manganese(III) bis(acetylacetonate) nitrate and p-nitrosoaniline were studied by the inhibited polymerization method. The kinetic parameters of initiation were calculated, and participation of the monomer in the initiation stage was established.