Poly(aryl ethers) by nucleophilic aromatic substitution. I. Synthesis and properties

A series of new aromatic polyethers have been prepared by solution condensation polymerization. The synthesis involves the condensation of a dialkali metal salt of a dihydric phenol with an “activated” or negatively substituted aromatic dihalide in an anhydrous dipolar aprotic solvent at elevated temperatures. The reaction is rapid, free of side reactions, and yields polymers of excellent color. Bakelite polysulfone can be prepared in this manner by reaction of the disodium salt of bisphenol A with 4,4′-dichlorodiphenyl sulfone in dimethyl sulfoxide (DMSO). Only dipolar aprotic solvents are useful for conducting the polymerization. Of these, DMSO and Sulfolane (tetrahydrothiophene 1,1-dioxide) are the most effective. Water or other competing nucleophiles must be absent if high molecular weight is to be obtained. Besides providing the necessary solubility, this highly polar solvent is believed to be essential in providing the rapid polymerization rates observed. The rates are further found to depend on the basicity of the bisphenol salt and upon the electron-withdrawing power of the activating group in the dihalide. As is usual for this type of reaction, the difluorides are found to be more reactive than the corresponding dichlorides. Most of the polyethers are amorphous, rigid, tough thermoplastics with high second-order transitions (T_g). Thermal stability and electrical properties are noteworthy. These and other properties are described for polysulfone, and glass transitions are given for a selected list of the other polyethers.     

Poly(Aryl ethers) by nucleophilic aromatic substitution. II. Thermal stability

The thermal stability and degradation process for a specific poly(aryl ether) system have been studied. In particular, the polymer which is available from Union Carbide Corporation as Bakelite polysulfone has been examined in detail. Polysulfone can be prepared from 2,2-bis(4-hydroxyphenyl)propane and 4,4′-dichlorodiphenyl sulfone by nucleophilic aromatic substitution. Because of a low-temperature transition at ? 100°C. and a glass transition at 195°C., polysulfone retains useful mechanical properties from ?100°C. to 175°C. A number of experimental methods were utilized to study the thermal decomposition process for this polymer system. Polysulfone gradually degraded in vacuum above 400°C. as demonstrated by mass spectrometry. Thermogravimetric analysis in argon, air, or high vacuum indicated that rapid decomposition began above 460°C. From gas chromatography, mass spectrometry and repeated laboratory pyrolyses, a number of products from polymer decompositions were identified. The most important degradation process in vacuum or inert atmosphere was loss of sulfur dioxide. Several model compounds representative of portions of poly(aryl ether) molecules were synthesized and the relative thermal stabilities determined. Possible mechanisms for pure thermal decomposition of polysulfone were derived from the product analyses, model studies, and consideration of bond dissociation energies.     

Poly(arylene sulfide)s via nucleophilic aromatic substitution reactions of halogenated pyromellitic diimides

Nucleophilic aromatic substitution (SNAr) reactions are exploited to prepare poly(arylene sulfide)s (PAS's) via the reaction of bis-thiolates and dibrominated pyromellitic diimide (PMDI) derivatives. Small-molecule model studies reveal the reaction is well-defined and proceeds in quantitative yield in practical times at room temperature. Variation in comonomer feed ratios allowed some control over target polymer molecular weights in the step polymerization, but control was likely limited by the relatively poor polymer solubility in the dipolar aprotic solvents typically employed to promote SNAr reactions. One substitution pattern produces a steric “pocket” around the PMDI units, inducing a peculiar solubility trend in halogenated solvents; that is, greatly reduced solubility in CHCl₃ relative to CH₂Cl₂ and C₂H₂Cl₄. One example small-molecule readily dissolves in CHCl₃ at room temperature, then rapidly grows poorly soluble crystals revealed by single-crystal XRD to contain CHCl₃ molecules in the steric pockets. Finally, the recently demonstrated depolymerization of phthalonitrile-based PAS's via ipso substitution with monothiolates as chain scission agents yields quantitative molecular weight reduction to monomeric species from the polymers reported here.     

Efficient nucleophilic aromatic substitution between aryl nitrofluorides and alkynes

The nucleophilic aromatic substitution reaction between electron-deficient aryl fluorides and terminal alkynes is shown to be efficiently promoted by sodium bis(trimethylsilyl)amide as a base. Moderate to excellent yields of 2-ethynylnitrobenzene products can be obtained under mild conditions.     

Poly(arylene sulfide)s by nucleophilic aromatic substitution polymerization of 2,7‐difluorothianthrene

Poly(thianthrene phenylene sulfide) and poly(thianthrene sulfide) have been prepared by nucleophilic aromatic substitution polymerization of the activated monomer 2,7‐difluorothianthrene with bis thiophenoxide and sulfide nucleophiles, respectively. The resulting polymers are thermally stable, amorphous materials that have been characterized by differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), gel permeation chromatography (GPC), matrix‐assisted laser desorption/ionization‐time‐of‐flight (MALDI‐TOF) mass spectrometry, UV‐Vis spectroscopy, refractometry, and intrinsic viscosity (IV) measurements. The polymers produced exhibit 5% weight loss values approaching 500 °C in inert and air atmospheres and glass transition temperatures that range from 149 to 210 °C. Poly(thianthrene phenylene sulfide) with a number average molecular weight of 22,100 g/mol has been synthesized with an IV in DMPU of 0.62 dL/g at 30 °C. Creasable films of this polymer have been prepared by solvent casting and melt pressing at 250 °C. Films of poly(thianthrene phenylene sulfide) exhibit transparencies greater than 50% at wavelengths exceeding 400 nm and a high refractive index value of 1.692 at a wavelength of 633 nm, making the polymer interesting for optical applications. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2453–2461, 2009     

P(i-BuNCH2CH2)3N: an efficient promoter for the nucleophilic aromatic substitution reaction of aryl fluorides with aryl TBDMS (or TMS) ethers

[reaction: see text]. The nucleophilic aromatic substitution reaction between electron-deficient aryl fluorides and aryl TBDMS (or TMS) ethers has been shown to be efficiently promoted by proazaphosphatranes such as P(i-BuNCH(2)CH(2))(3)N (3). Excellent yields of diaryl ether products were obtained under unusually mild conditions.     

Imidazole as leaving group in aromatic nucleophilic substitution reactions

The reaction of N-(2,4,6-trinitrophenyl) imidazole with n-butylamine is pH dependent. A mechanism involving acid catalyzed leaving group departure is suggested.     

Selective nucleophilic substitution reactions on poly(epichlorohydrin) using aromatic and aliphatic thiol compounds

Poly(epichlorohydrin) has been modified chemically using aromatic and aliphatic thiol compounds. The reactivity and kinetics of these modifiers with respect to substitution and elimination was studied. Therefore, the chemical structure of the reaction products was analysed using ¹³C NMR, ¹H NMR and ¹³C-DEPT spectroscopies. It is shown that both, aromatic as well as aliphatic thiols, are highly selective with respect to nucleophilic substitution as reaction conditions can be found which allow one to achieve degrees of modification of up to 90% without any elimination side-reaction. As a consequence no degradative chain-scission takes place what has been confirmed by GPC analysis.A comparison between both types of thiol modifiers shows that aromatic ones react faster and that higher degrees of modification are reached than with their aliphatic homologues.     

Phthalide as an activating group for the synthesis of poly(aryl ether phthalide)s by nucleophilic aromatic substitution

The phthalide ring was examined as an activating group for nucleophilic aromatic substitution. The proposed mechanism by which activation occurs is through a ring opening of the phthalide ring to form a Meisenheimer‐like σ complex. 3,3‐Bis(4‐fluorophenyl)phthalide was synthesized and examined under different reaction conditions to determine its suitability for polymer formation. Semiempirical calculations at the PM3 level suggested that 3,3‐bis(4‐fluorophenyl)phthalide is only moderately activated, whereas ¹H, ¹³C, and ¹⁹F NMR spectroscopy suggested that the monomer was not sufficiently activated for nucleophilic aromatic substitution. However, low‐molecular‐weight polymers (number‐average molecular weight < 7000 g/mol) were produced from bisphenol A, hydroquinone, and phenolphthalein. The polymers were characterized by gel permeation chromatography, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, NMR spectroscopy, and differential scanning calorimetry. The polymers displayed relatively high glass‐transition temperatures. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3046–3054, 2002     

Thianthrene as an activating group for the synthesis of poly(aryl ether thianthrene)s by nucleophilic aromatic substitution

A method for the preparation of poly(aryl ether thianthrene)s has been developed in which the aryl ether linkage is generated in the polymer‐forming reaction. The thianthrene heterocycle is sufficiently electron‐withdrawing to allow fluoro displacement with phenoxides by nucleophilic aromatic substitution. The monomer for this reaction, 2,7‐difluorothianthrene, can be synthesized in a moderate yield by a simple reaction sequence. Semiempirical calculations at the PM3 level suggest that 2,7‐difluorothianthrene is sufficiently activated, whereas NMR spectroscopy (¹H and ¹³C) indicates that the monomer is only slightly activated or (¹⁹F) not sufficiently activated for nucleophilic aromatic substitution. Model reactions with p‐cresol have demonstrated that the fluorine atoms on 2,7‐difluorothianthrene are readily displaced by phenoxides in high yields, and the process has been deemed suitable for polymer‐forming reactions. High‐molecular‐weight polymers have been produced from bisphenol A, bisphenol AF, and 4,4′‐biphenol. The polymers have been characterized with gel permeation chromatography, NMR spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. The glass‐transition temperatures for the polymers of different compositions and molecular weights range from 138 to 181 °C, and all the polymers have shown high thermooxidative stability, with 5% weight loss values in an air environment approaching 500 °C. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6353–6363, 2004     

Poly(arylether amides) and poly(aryletherketone amides) via aromatic nucleophilic substitution reactions of self‐polymerizable AB and AB2 monomers

Two new extended self‐polymerizable AB monomers, N‐(4‐fluorobenzoyl)‐4‐amino‐4′‐hydroxydiphenylether and N‐(4‐fluorobenzoyl)‐4‐amino‐4′‐hydroxybiphenyl, were prepared. The monomers were homopolymerized and copolymerized to high‐molecular‐weight, linear poly(arylether amides) in N‐methylpyrrolidone (NMP)/toluene in the presence of potassium carbonate at elevated temperature. The polymers retained NMP up to 200 °C. Samples containing small amounts of the solvent (5–10 wt %) were soluble in polar aprotic solvents. However, after complete removal of the NMP, the polymers were only soluble in strong acids such as sulfuric acid and methanesulfonic acid (MSA). The polymers, which had intrinsic viscosities of 0.57–1.49 dL/g (30.1 ± 0.1 °C in MSA), were semicrystalline with melting temperatures above 400 °C. Two new self‐polymerizable AB₂ amide monomers, N,N′‐bis(4‐fluorobenzoyl)‐3,4‐diamino‐4′‐hydroxydiphenylether and N,N′‐bis(4‐fluorobenzoyl)‐3,5‐diamino‐4′‐hydroxybenzophenone, were also prepared and polymerized to give a hyperbranched poly(arylether amide) and a hyperbranched poly(aryletherketone) amide. The arylfluoride‐terminated, amorphous polymers had intrinsic viscosities of 0.34 and 0.24 dL/g (30.0 ± 0.1 °C in m‐cresol), glass‐transition temperatures of 210–269 °C, and were soluble in a wide variety of organic solvents. Matrix‐assisted laser desorption/ionization time‐of‐flight analysis indicated that the components of the low‐molecular‐weight fractions contained cyclic structures. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2374–2389, 2003     

Aryl- and hetaryl-containing amide anions in reactions of aromatic nucleophilic substitution

The results of kinetic studies of S_NAr reactions ofp-nitrohalobenzenes, hexafluorobenzene, and pentafluoropyridine with aryl-, diaryl-, and hetarylamide anions under homogeneous conditions (in dimethyl sulfoxide) and under conditions of phase transfer catalysis (in toluene) are analyzed. The increase in the Brönsted coefficient _Nu in reactions of amide anions in DMSO as the electrophilicity of the substrate increases and steric hindrance in nucleophiles decreases may result from a higher degree of charge transfer from a nucleophile to a substrate in the transition state. The possibility of replacement of the S_NAr by the SET mechanism in these reaction is discussed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2315–2319, December, 1995.     

Ultrasound-promoted aromatic nucleophilic substitution of dichlorobenzene iron(II) complexes

The nucleophilic aromatic substitution under ultrasound irradiation of a dichlorobenzene iron η⁶-complex with various secondary amines is reported. The reaction time at moderate temperatures is considerably shortened (15 min) compared to non sonicated reaction conditions at room temperature (several days) or at solvent refluxing temperature (12-48 h). Controlled mono- or di-substitution was achieved by the tuning of the amine nucleophilicity and the solvent polarity. The method was successfully applied to the synthesis of differently substituted phenylenediamines.     

First nucleophilic aromatic substitution of annelated pyrazole.

3-Chloropyrazolo[3,4-c]quinoline 5, 3-chloropyrazolo[3,4-c]isoquinoline 6, 1,2-dihydro-1,2-dimethylpyrazolo[3,4-c]quinolin-3-one 8, and 1,2-dihydro-1,2-dimethylpyrazolo[3,4-c]isoquinolin-3-one 10 were obtained by acid-induced nucleophilic aromatic substitution (S(N)H) of H-3 in N-hydroxypyrazolo[3,4-c]quinoline 1b and in N-hydroxy pyrazolo[3,4-c]isoquinoline 3b. In the acid-induced chlorination, 3b was far more reactive than 1b, whereas the related N-hydroxypyrazolo[4,3-c]quinoline 2b and N-hydroxypyrazolo[4,3-c]isoquinoline 4b were completely unreactive toward S(N)H under identical conditions.     

Gold(III)-catalyzed nucleophilic substitution of propargylic alcohols

Gold-catalyzed nucleophilic substitution on propargylic alcohols, with various C-, O-, and S-nucleophiles, is described under very mild conditions (room temperature, dichloromethane) in 0-97% yield.     

ortho-Lithium/magnesium carboxylate-driven aromatic nucleophilic substitution reactions on unprotected naphthoic acids

Substitution of an ortho-fluoro or methoxy group in 1- and 2-naphthoic acids furnishing substituted naphthoic acids occurs in good to excellent yields upon reaction with alkyl/vinyl/aryl organolithium and Grignard reagents, in the absence of a metal catalyst without the need to protect the carboxyl (CO(2)H) group. This novel nucleophilic aromatic substitution is presumed to proceed via a precoordination of the organometallic with the substrate, followed by an addition/elimination.     

The kinetics and mechanisms of aromatic nucleophilic substitution reactions in liquid ammonia

The rates of aromatic nucleophilic substitution reactions in liquid ammonia are much faster than those in protic solvents indicating that liquid ammonia behaves like a typical dipolar aprotic solvent in its solvent effects on organic reactions. Nitrofluorobenzenes (NFBs) readily undergo solvolysis in liquid ammonia and 2-nitrofluorobenzene is about 30 times more reactive than the 4-substituted isomer. Oxygen nucleophiles, such as alkoxide and phenoxide ions, readily displace fluorine of 4-NFB in liquid ammonia to give the corresponding substitution product with little or no competing solvolysis product. Using the pK(a) of the substituted phenols in liquid ammonia, the Br?nsted β(nuc) for the reaction of 4-NFB with para-substituted phenoxides is 0.91, indicative of the removal of most of the negative charge on the oxygen anion and complete bond formation in the transition state and therefore suggests that the decomposition of the Meisenheimer σ-intermediate is rate limiting. The aminolysis of 4-NFB occurs without general base catalysis by the amine and the second-order rate constants generate a Br?nsted β(nuc) of 0.36 using either the pK(a) of aminium ion in acetonitrile or in water, which is also interpreted in terms of rate limiting breakdown of the Meisenheimer σ-intermediate. Nitrobenzene and diazene are formed as unusual products from the reaction between sodium azide and 4-NFB, which may be due to the initially formed 4-nitroazidobenzene decomposing to give a nitrene intermediate, which may then give diazene or be trapped by ammonia to give the unstable hydrazine which then yields nitrobenzene.     

Indium(III)-catalysed aryl sulfonylation reactions

A rapid, high yielding and regioselective process has been developed for the synthesis of biaryl sulfones via sulfonylation reactions catalysed by indium(III) chloride.