The scaling behavior of the molecular parameters of the hyperbranched polymers made by self-condensing vinyl polymerization

The hyperbranched polymers can be made by self-condensing vinyl polymerization without gelation transition. The average molecular weights, as well as the average sizes, can reach infinite values as the reaction is quantitatively completed, and the scaling forms of the molecular parameters should exist. In the paper, based on a recursion formula, the scaling form of the number fraction distribution and the number of the n-mers are given analytically as the conversion of double bonds is near 1. The mean square radius of gyration for very large hyperbranched polymers is calculated explicitly to give a scaling exponent. Finally, a scaling relation associated with the fractal dimension and the polydispersity exponent is given clearly.     

Effect of flexibility of grafted polymer on the morphology and property of nanosilica/PVC composites

In this study, poly(methyl methacrylate)-grafted-nanosilica (PMMA-g-silica) and a copolymer of styrene (St), n-butyl acrylate (BA) and acrylic acid (AA)-grafted-nanosilica (PSBA-g-silica) hybrid nanoparticles were prepared by using a heterophase polymerization technique in an aqueous system. The grafted polymers made up approximately 50 wt.% of the resulted hybrid nanoparticles which showed a spherical and well-dispersed morphology. The silica hybrid nanoparticles were subsequently used as fillers in a poly(vinyl chloride) (PVC) matrix to fabricate PVC nanocomposite. Morphology study of PVC nanocomposites revealed that both PMMA- and PSBA-grafted-silica had an adhesive interface between the silica and PVC. The tensile strength and elongation to break were found to be improved significantly in comparison with that of untreated nanosilica/PVC composites. Finally our results clearly demonstrated that the properties (e.g. chain flexibility, composition) of the grafted polymer in the hybrid nanoparticles could significantly affect the dispersion behavior of hybrid nanoparticles in PVC matrix, dynamic mechanical thermal properties and mechanical properties of the resulted PVC composites.     

Supercritical fluid-assisted synthesis of a carbon nanotubes-grafted biocompatible polymer composite

A nanocomposite consisting of multi-wall nanotubes (MWNTs) grafted with a biocompatible polymer poly(2-hydroxyethyl methacrylate) was prepared by in situ polymerization in supercritical carbon dioxide. The surface of the MWNTs was first surface modified with hydroxyl groups in the solution of KMnO₄ and a phase-transfer catalyst. MWNT-OH was then functionalized with vinyl groups using a silane coupling agent, γ-methacryloxypropyltrimethoxysilane. The silane groups can improve the dipersion of MWNTs in supercritical carbon dioxide, while the terminal vinyl groups help fabricate polymer chains on the MWNT surface. The as-synthesized products were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and thermo-gravimetric analysis. The SEM and TEM images showed that the nanotubes were well coated with the polymer shell. The composite had higher thermal stability than the pure polymer and dispersed well in methanol. This biocompatible polymer composite was prepared using a green method and is expected to be useful as a biomaterial composite with potential applications in the biological field.     

Poly(hydroethyl acrylate) grafted from ZnO nanoparticles via surface-initiated atom transfer radical polymerization

Poly(hydroethyl acrylate) (PHEA) was grafted from ZnO nanoparticles via the copper-mediated surface-initiated atom transfer radical polymerization (SI-ATRP) technique with the bromo-acetamide modified ZnO nanoparticles (BrA-ZnO) as macroinitiators with the catalysts of 1,10-phenanthroline and Cu(I)Br in water. Graft reaction was first order kinetic with respect to the polymerizing time in the low monomer conversion stage, this being typical for ATRP. A percentage of grafting (PG%) of 62.4% was achieved in 12 h, calculated from the elemental analysis results. The product, poly(hydroethyl acrylate) grafted ZnO nanoparticles (PHEA-ZnO) were also characterized with Fourier transform infrared spectroscopy (FT-IR), UV–vis spectroscopy, thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM).     

Preparation of Halloysite Nanotubes/Polystyrene (HNTs/PS) Core‐shell Particles via Soap‐less Microemulsion Polymerization

Halloysite nanotubes/polystyrene (HNTs/PS) inorganic/organic core‐shell particles were prepared via a convenient soap‐less microemulsion polymerization. The inorganic cores were pre‐treated with allyl alcohol (AA) and the polymer shells were prepared successfully by the facile soap‐less microemulsion polymerization of styrene (St) with the allyl alcohol‐modified halloysite nanotube (AA‐HNT) nanoparticles as seeds, and potassium persulfate (KPS) as initiator in water. The products were characterized by Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). The morphologies of the HNTs/PS core‐shell particles were characterized by transmission electron microscopy (TEM). The mechanism of the nucleation is also mentioned.     

Mechanical and Thermal Properties Enhancement of Poly(Lactic Acid)/Halloysite Nanocomposites by Maleic-Anhydride Functionalized Rubber

Poly(lactic acid) (PLA)/halloysite composites were prepared using melt compounding followed by compression molding. Maleic anhydride grafted styrene-ethylene/butylene-styrene (SEBS-g-MAH) was used to toughen the PLA composites. The mechanical properties of the PLA composites were studied through tensile, flexural, and impact tests. The thermal properties were characterized by using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The fracture surfaces of the composites were assessed by using field emission scanning electron microscopy (FESEM). The impact strength and thermal properties of the PLA/halloysite composites were increased by addition of SEBS-g-MAH.     

Covalent attachment of polystyrene on multi-walled carbon nanotubes via nitroxide mediated polymerization

A new method to attach polymers on carbon nanotubes has been studied. We used nitroxide mediated polymerization (NMP) to graft polystyrene from multi-walled carbon nanotubes (MWNTs). Carboxyl groups on MWNTs were activated with thionyl chloride (SOCl₂) to give acyl chloride derivative (MWNT-COCl). NMP initiator was introduced to MWNT by esterification of 1-hydroxy-2-phenyl-2-(2′,2′, 6′, 6′-tetramethyl-1′-piperidinyloxy)ethane (HO-PE-TEMPO) with acyl chloride groups of MWNTs. The obtained MWNT-PE-TEMPO was used for initiation of bulk polymerization of styrene, yielding polystyrene-grafted MWNTs (MWNT-g-pSt). The resulting composites of MWNT-g-pSt were analyzed by TEM, SEM, FT-IR and TGA.     

New nanocomposites containing metal nanoparticles, carbon nanotube and polymer

Metal-carbon nanotube-graft-polymer (MCNT-g-P) nanocomposites were synthesized and characterized successfully. In this work, multiwall carbon nanotubes (MWCNT) were opened using HNO₃/H₂SO₄ mixture and filled by metal nanoparticles such as silver nanoparticles through wet chemistry method. Then MWCNT containing metal nanoparticles were used as macroinitiator for ring opening polymerization of ε-caprolactone and MCNT-g-P nanocomposites were obtained. Length of grafted polymer arms onto the MWCNT was controlled using MWCNT/ε-caprolactone ratio. Structure and properties of nanocomposites were evaluated by TEM, DSC, TGA, and spectroscopy methods.     

Surface-initiated atom transfer radical polymerization from TiO2 nanoparticles

Two kinds of hydrophilic polymers, poly(oxyethylene methacrylate) (POEM) and poly(styrene sulfonic acid) (PSSA), were grafted from TiO₂ nanoparticles via the surface-initiated atom transfer radical polymerization (ATRP) technique. Chlorine modified TiO₂ nanoparticles (TiO₂-Cl), the ATRP initiators, were synthesized by the reaction of -OH in TiO₂ with 2-chloropropionyl chloride (CPC). FT-IR, UV-vis spectroscopy and X-ray photoelectron spectroscopy (XPS) clearly showed that the polymer chains were successfully grafted from the surface of TiO₂ nanoparticles. The hydrophilically modified TiO₂ nanoparticles have a better dispersion in alcohol than unmodified nanoparticles, as revealed by transmission electron microscopy (TEM). It was also found that the polymer grafting did not significantly alter the crystalline structure of the TiO₂ nanoparticles according to the X-ray diffraction (XRD) patterns. Grafting amounts were 10% of the weight for both TiO₂-POEM and TiO₂-PSSA nanoparticles, as determined by thermogravimetric analysis (TGA).     

Functionalization of multiwalled carbon nanotubes for reinforcing of poly(l-lactide-co--caprolactone) biodegradable copolymers

Up to now, synthetic polymers and biomacromolecules have been grafted or assembled onto the convex surface of carbon nanotubes (CNTs) via covalent bonds or chemisorptions. In this research, poly(l-lactide-co--caprolactone)-functionalized multiwalled carbon nanotubes (MWCNT-OH-g-PCLA)s are synthesized by in situ ring-opening copolymerization of l-lactide (LA) and -caprolactone (CL) using stannous octanoate and hydroxylated MWCNTs (MWCNT-OHs) as the initiating system. The pristine MWCNTs are modified to possess carboxyl groups and then hydroxyl groups. MWCNT-OHs are used as coinitiators to polymerize LA and CL by the surface-initiated ring-opening polymerization. The FT-IR spectra, SEM and TEM micrographs revealed that the PCLA grafted form the sidewall of MWCNTs strongly. The TGA analysis indicates that about 75 wt% of functionalized MWCNTs with PCLA belongs to grafted PCLA and the remaining 25 wt% to the initial MWCNT-OH.     

Surface modification of hydroxyapatite with poly(methyl methacrylate) via surface-initiated ATRP

This article describes the fabrication of hydroxyapatite (HAP) nanocomposites grafted with poly(methyl methacrylate) (PMMA). Surface-initiated atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) was carried out from hydroxyapatite particles derivatized with ATRP initiators. The structure and properties of the nanocomposites were investigated by thermogravimetric analysis (TGA), transmission electron microscopy (TEM), differential scanning calorimeter (DSC) measurements, and contact angle analyses. TGA was used to estimate the grafting density of ATRP initiators (0.49 initiator/nm²) and the amount of grafted PMMA on the HAP surface. The contact angle analyses indicated that grafting PMMA onto the HAP surface dramatically increased the hydrophobicity of the surface. Moreover, the HAP nanocomposites showed excellent dispersibility in both aqueous solution and organic solvent.     

A facile method for grafting of bisphenol A imprinted polymer shells onto poly(divinylbenzene) microspheres through precipitation polymerization

Core-shell structured polymers are usually prepared by “grafting to” or “grafting from” techniques, wherein polymer supports were first modified by vinyl bonds or initiators. Success can be immediate, but more often a learning curve needs to be traversed. In this paper, direct grafting bisphenol A imprinted polymer onto poly(divinylbenzene) microspheres through precipitation polymerization is introduced. The obtained microspheres were characterized by SEM, TEM, FTIR and BET. Firstly, mono-disperse poly(divinylbenzene) microspheres of 3 μm in size were prepared by precipitation polymerization. The solvent for grafting was then optimized and it was found that the mixtures of toluene and acetonitrile (30/70, v/v) were ideal choice from the image and structure analysis of the shells. Shells of different thickness (270-840 nm), depending on the concentrations of monomers in the precursor, were then directly grafted to the microspheres by a reactive, entropic capture mechanism. The recognition ability of the microspheres was evaluated by solid-phase extraction and clear selectivity showed toward bisphenol A. The leak of bisphenol A was not found after extraction and thus these core-shell structured imprinted polymers are believed to have potential applications in trace analysis area.     

Synthesis and Characterization of Methylacrylic Acid and Butyl Acrylate Grafted onto Ethylene-Propylene-Diene Terpolymer

A multi-component polymer of methacrylic acid (MAA) and butyl acrylate (BA) grafted onto ethylene-propylene-diene (EPDM) terpolymer was synthesized in toluene using benzoyl peroxide (BPO) as initiator. The effect of EPDM/MAA-BA ratio and MAA/BA ratio on the grafting ratio of polymerization was investigated. The products were characterized by Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), surface energy, inherent viscosity, and atomic force microscopy (AFM). The results showed that the MAA and BA monomers were successfully grafted onto EPDM. Furthermore, after being grafted, the polarity of the surface of the EPDM-g-MAA-BA increased with increasing grafting ratio, and the morphology of its surface became more smooth.     

A new hyperbranched star polyether electrolyte with high ionic conductivity

Hyperbranched poly(glycidol) containing hydroxyl groups was firstly synthesized via anionic polymerization and then reacted with 2-bromoisobutyl bromide to form macroinitiator HPG-Br. Finally, a hyperbranched star polymer (HPG-PPEGMA) was successfully prepared by atom transfer radical polymerization (ATRP) of poly(ethylene glycol) methyl ether methacrylate using HPG-Br as macroinitiator. The structures and properties of the obtained polymers were characterized by ¹H NMR, attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), differential scanning calorimetry (DSC), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). The ionic conductivity of the polymer electrolytes composed of HPG-PPEGMA and lithium bis(trifluoromethanesulfonimide) (LiTFSI) was investigated via electrochemical impedance spectroscopy. The results showed that the room temperature ionic conductivity of the prepared hyperbranched star polymer electrolytes had a higher ionic conductivity. When [EO]/[Li] was 20, the ionic conductivity of the hyperbranched star polymer electrolyte was up to 1?×?10^?4 Scm^?1 at 30 °C. The onset decomposition temperature of the hyperbranched star polyether could reach 374 °C, indicating that the hyperbranched star polymer had a good thermal stability. The XRD results showed that the structure of the hyperbranched star polymer was beneficial to improve the ionic conductivity due to possessing a low degree of crystallinity.     

Grafting of polymers onto graphene oxide by cationic and anionic polymerization initiated by the surface-initiating groups

The grafting of polymers onto graphene oxide (GO) was achieved by two process: (1) cationic polymerization initiated by carboxyl (COOH) groups on GO and (2) anionic alternating copolymerization of epoxides with cyclic acid anhydrides initiated by potassium carboxylate (COOK) groups on GO. The cationic polymerizations of isobutyl vinyl ether and N-vinylcarbazole were successfully initiated by COOH groups on GO to give the corresponding polymer-grafted GO. The cationic polymerization was considered to be initiated by proton addition from COOH groups to monomer and propagation of polymer cation proceeds with carboxylate anion as a counter ion. It was found that the corresponding polymer was successfully grafted onto GO based on the termination reaction of growing polymer cation and surface counter carboxylate anion. On the other hand, the anionic ring-opening alternating copolymerization of epoxide and cyclic acid anhydrides were also initiated by COOK groups on GO, which were previously introduced onto GO by the neutralization of COOH groups with KOH. During the anionic ring-opening copolymerization of styrene oxide (SO) with phthalic anhydride (PAn) and maleic anhydride (MAn), the corresponding polyesters, poly(SO-alt-PAn) and poly(SO-alt-MAn), were successfully grafted onto GO, based on the propagation of the polyesters from COOK groups. The grafting of polymers onto GO during the above cationic and anionic polymerizations was confirmed by thermal decomposition gas chromatogram/mass spectrum. The untreated GO in THF was immediately precipitated within 15 min. On the contrary, these polymer-grafted GOs gave stable dispersions in THF and no precipitation of polymer-grafted GOs was observed even after one week.     

Synthesis and characterization of polycaprolactone-grafted carbon nanotubes via click reaction

Polycaprolactone (PCL) was covalently grafted on the surface of carbon nanotubes by a simple click reaction of propargyl-terminated PCL (propargyl-PCL) and carbon nanotubes (CNTs) containing azide groups (MWNT-N₃). Propargyl-PCL was synthesized by the ring-opening polymerization of ε-caprolactone using propargyl alcohol and stannous octoate. MWNT-N₃ was prepared from MWNT having 2-bromoisobutyryl groups (MWNT-Br) with sodium azide by azidation. The melting temperature of propargyl-PCL was shifted to the high temperature in PCL-grafted MWNT. The thermal stability of PCL-grafted MWNT was enhanced as compared to that of propargyl-PCL. PCL was coated on the surface of MWNT with a high density of PCL chains, which showed good solubility of PCL-grafted MWNT in organic solvents. PCL-grafted MWNT was characterized with FT-IR, ¹H NMR, Raman, differential scanning calorimetry, thermogravimetric analysis, and scanning electron microscopy.     

甲基丙烯酸甲酯—丙烯酸丁酯共聚物微观结构研究

用＾１３Ｃ ＮＭＲ研究了由基团转移共聚得的的甲基丙烯酸甲酯－丙烯酸酯共聚物的微观结构，共聚物中单体链节的三元组含量从季碳和羰基碳的共振信号测得，实验测得的三元组分数与通过竞聚率和单体组成比按末端基效应模式的计算值相符，丙烯酸丁酯由于具有大得多的竞聚率值而呈现较强的均聚倾向。     

Novel Chiral Conducting Poly[N-(9-Fluorenylmethoxycarbonyl)-L-Alanine] (PN9FA) with Good Fluorescence Properties via Electropolymerization

Poly[N-(9-fluorenylmethoxycarbonyl)-L-alanine] (PN9FA) films with good fluorescence properties and chirality were prepared electrochemically by direct anodic oxidation of N-(9-fluorenylmethoxycarbonyl)-L-alanine (N9FA) in boron trifluoride diethyletherate (BFEE). Results of FT-IR spectral measurements indicated that N9FA was probably polymerized through the coupling at the C (2) and C (7) positions. Results of electrochemical measurements of PN9FA showed good redox activity and stability. The fluorescence spectra indicated that PN9FA films were blue-light emitters. In addition, the structures and properties of the monomer and the polymers were characterized and evaluated with cyclic voltammograms (CVs), 1H-NMR, UV–vis spectra (UV), thermogravimetric analysis (TGA), and scanning electron microscopy (SEM).     

Surface modification of poly(styrene-b-(ethylene-co-butylene)-b-styrene) elastomer via photo-initiated graft polymerization of poly(ethylene glycol)

Poly(styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS) copolymer biomedical elastomer was covalently grafted with poly(ethylene glycol) methyl ether methacrylate (PEGMA) via a photo-initiated graft polymerization technique. The surface graft polymerization of SEBS with PEGMA was verified by ATR-FTIR and XPS. Effect of graft polymerization parameters, i.e., monomer concentration, UV irradiation time and initiator concentration on the grafting density was investigated. Comparing with the virgin SEBS film, the PEGMA-modified SEBS film presented an enhanced wettability and a larger surface energy. Besides, the surface grafting of PEGMA imparted excellent anti-platelet adhesion and anti-protein adsorption to the SEBS surface.     

Liquid–Liquid Transition and Detrapping of Trapped Carriers of P(MMA/BA) Copolymers by Thermally Stimulated Depolarization Current

Poly (methyl methacrylate/butyl acrylate) [P(MMA/BA)] copolymers (M _η～2×10⁵) with different mass percentages of PMMA (100/0, 90/10, 81/19, and 75/25), were synthesized by the method of solution polymerization. In addition to the normal α and ρ peak, a third τ peak is observed in thermally stimulated depolarization current (TSDC) spectra of the copolymers in the high temperature region. The α peak‐corresponds to the glass transition, the ρ peak originates from the detrapping of trapped carriers in the bulk amorphous structure related with flexible side groups, and the τ peak can be attributed to the charge detrapping related to the liquid–liquid transition of the copolymers. The three peaks all move to lower temperature with an increase of the BA component, indicating that the flexible side groups of butyl acrylate not only have an effect of plasticization on the glass transition and liquid–liquid transition, but also make the trap depth shallower and the detrapping process easier for the ρ and τ peaks. The experimental results confirm that TSDC analysis is very sensitive for investigating the liquid–liquid transition of polymers. The liquid–liquid transition temperature (T _LL) of the copolymers follows a type of the Fox equation. Fitting the results gives a T _LL of 102°C for polybutyl acrylate.