镧系元素对Pd/Al2O3的修饰及其与丙烯腈气相加氢的关联

用浸渍法制备了镧系元素(Ce,La,Sm)修饰的低负载Pd(0.05 w.t%)/A l2O3催化剂,并应用于丙烯腈选择性加氢反应,实验结果表明:这种方法制备的催化剂对丙烯腈具有很好的选择性,镧系元素的添加大大促进了催化剂的活性和稳定性。XRD的测试结果表明稀土元素铈的添加减弱了Pd和载体A l2O3之间的相互作用,从而导致了Pd从载体表面游离出来。从TEM照片上可以看出催化剂颗粒尺寸的变化。XPS的测试结果表明用镧系元素修饰的Pd的结合能向较高能级发生了转移,从而使得钯被还原为零价。     

Enhanced oxygen reduction at Pd catalytic nanoparticles dispersed onto heteropolytungstate-assembled poly(diallyldimethylammonium)-functionalized carbon nanotubes

Both Keggin-type phosphotungstic acid (HPW) and Pd are not prominent catalysts towards the oxygen reduction (ORR), but their composite Pd-HPW catalyst produces a significantly higher electrochemical activity for the ORR in acidic media. The novel composite catalyst was synthesized by self-assembly of HPW on multi-walled carbon nanotubes (MWCNTs) via the electrostatic attraction between negatively charged HPW and positively charged poly(diallyldimethylammonium (PDDA)-wrapped MWCNTs, followed by dispersion of Pd nanoparticles onto the HPW-PDDA-MWCNT assembly. The as-prepared catalyst was characterized by transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, thermal gravimetric analysis (TGA), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). TEM images show that Pd nanoparticles were uniformly dispersed on the surface of MWCNTs even when the Pd loading was increased to 60 wt%. Electrochemical activity of the catalysts for the ORR was evaluated by steady state polarization measurements using a rotating disk electrode. Compared with the acid treated MWCNTs, Pd nanoparticles supported on the HPW-assembled MWCNTs show a much higher ORR activity that is comparable to conventional Pt/C catalysts. The high electrocatalytic activities could be related to high dispersion of Pd nanoparticles as well as synergistic effects originating from the high proton conductivity of HPW. The Pd/HPW-PDDA-MWCNTs system as the cathode catalyst in proton exchange membrane fuel cells is demonstrated.     

Synthesis of carbon-supported Pd/SnO_2 catalyst for highly selective hydrogenation of 2,4-difluoronitrobenzene

Halogenated anilines have a wide range of applications in the production of pharmaceuticals and agrochemical substances, and thus it is of great importance to develop highly active and selective catalysts for the hydrogenation of halogenated nitrobenzenes. We approach this challenge by probing noble metal/non-noble metal oxide nanoparticles(NPs) catalysts. Carbon-supported Pd/SnO2catalysts were synthesized by the chemical reduction method, and their catalytic activity was evaluated by the hydrogenation reaction of 2,4-difluoronitrobenzene(DFNB) to the corresponding 2,4-difluoroaniline(DFAN), showing a remarkable synergistic effect of the Pd and SnO2 NPs. The as-prepared Pd/SnO2/C catalysts were characterized using TEM, XRD, H2 TPD and XPS techniques. Modifications to the electronic structure of the Pd atoms through the use of SnO2 led to the suppression of the hydrogenolysis of the C–F bond and the acceleration of nitrosobenzene(DFNSB) conversion and consequently, resulted in the inhibition of the formation of reactive by-products and may be responsible for the enhancements observed in selectivity.     

锐钛矿型TiO2担载的Pd催化剂用于乙炔选择加氢的催化性能及其表征

Anatase TiO₂ nanospindles containing 89% exposed {101} facets (TiO₂-101) and nanosheets with 77% exposed {001} facets (TiO₂-001) were hydrothermally synthesized and used as supports for Pd catalysts. The effects of the TiO₂ materials on the catalytic performance of Pd/TiO₂-101 and Pd/TiO₂-001 catalysts were investigated in the selective hydrogenation of acetylene to polymer-grade ethylene. The Pd/TiO₂-101 catalyst exhibited enhanced performance in terms of acetylene conversion and ethylene yield. To understand these effects, the catalysts were characterized by H₂ temperature-programmed desorption (H₂-TPD), H₂ temperatureprogrammed reduction (H₂-TPR), transmission electron microscopy (TEM), pulse CO chemisorption, X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA). The TEM and CO chemisorption results confirmed that Pd nanoparticles (NPs) on the TiO₂-101 support had a smaller average particle size (1.53 nm) and a higher dispersion (15.95%) than those on the TiO₂-001 support (average particle size of 4.36 nm and dispersion of 9.06%). The smaller particle size and higher dispersion of Pd on the Pd/TiO₂-101 catalyst provided more reaction active sites, which contributed to the improved catalytic activity of this supported catalyst.     

超声波-微波法制备NiW/Al2O3加氢脱硫催化剂

 采用一次浸渍技术制备了NiW/Al2O3加氢脱硫(HDS)催化剂,在制备过程中采用超声波处理浸渍液,采用微波进行样品干燥. 以噻吩为模型化合物,在微反装置上评价了该催化剂的加氢脱硫活性. 使用X射线光电子能谱和透射电镜等表征手段研究了催化剂的表面状态和物化性. 结果表明,使用超声波及微波技术制备的NiW/Al2O3催化剂具有较高的加氢脱硫活性,催化剂的活性组分较易硫化,可生成更多的硫化物种参与反应. 催化剂中硫化态钨的表面原子浓度较高,从而使硫化态钨物种保持较高的表面分散度,有利于增加活性中心的数目. 该催化剂的活性中心结构具有较多配位不饱和的边缘位和棱边位,因而具有较高的加氢脱硫活性.     

Rational Design of Pt−Pd−Ni Trimetallic Nanocatalysts for Room-Temperature Benzaldehyde and Styrene Hydrogenation

Nanostructures of the multimetallic catalysts offer great scope for fine tuning of heterogeneous catalysis, but clear understanding of the surface chemistry and structures is important to enhance their selectivity and efficiency. Focussing on a typical Pt−Pd−Ni trimetallic system, we comparatively examined the Ni/C, Pt/Ni/C, Pd/Ni/C and Pt−Pd/Ni/C catalysts synthesized by impregnation and galvanic replacement reaction. To clarify surface chemical/structural effect, the Pt−Pd/Ni/C catalyst was thermally treated at X=200, 400 or 600 °C in a H₂ reducing atmosphere, respectively termed as Pt−Pd/Ni/C−X. The as-prepared catalysts were characterized complementarily by XRD, XPS, TEM, HRTEM, HS-LEIS and STEM-EDS elemental mapping and line-scanning. All the catalysts were comparatively evaluated for benzaldehyde and styrene hydrogenation. It is shown that the “PtPd alloy nanoclusters on Ni nanoparticles” (PtPd/Ni) and the synergistic effect of the trimetallic Pt−Pd−Ni, lead to much improved catalytic performance, compared with the mono- or bi- metallic counterparts. However, with the increase of the treatment temperature of the Pt−Pd/Ni/C, the catalytic performance was gradually degraded, which was likely due to that the favourable nanostructure of fine “PtPd/Ni” was gradually transformed to relatively large “PtPdNi alloy on Ni” (PtPdNi/Ni) particles, thus decreasing the number of noble metal (Pt and Pd) active sites on the surface of the catalyst. The optimum trimetallic structure is thus the as synthesised Pt−Pd/Ni/C. This work provides a novel strategy for the design and development of highly efficient and low-cost multimetallic catalysts, e. g. for hydrogenation reactions.     

Highly Porous Amidoximed Carbon Nanofibers Supported Palladium(0) Nanoparticle Catalyzed Heck Reaction

Highly porous amidoximed carbon nanofibers(AOCNFs), which were fabricated via a conventional electrospinning technique followed by chemically modification, impregnation-reduction and carbonization process, had been used for the immobilization of palladium nanoparticles(Pd NPs) catalyst. During the carbonization process, polystyrene(PS) was selectively decomposed from bicomponent fibers, generating porous fibers. Fourier transform infrared spectroscopy(FTIR) result revealed the functional groups on PAN-PS fibers(PAN=polyacrylonitrile), AOPAN-PS fibers and AOCNFs; scanning electron microscopy(SEM) was used to observe the morphology of all stages of nanofibers; transmission electron microscopy(TEM) result gave the structure of through-hole morphology clearly visible and the dispersion of Pd NPs on the surface of nanofibers; and X-ray photoelectron spectra(XPS) confirmed that Pd nanoparticles on the surface of AOCNFs was of the metallic state. Moreover, the as-prepared catalyst exhibited high catalytic activity and efficient recycle for Heck coupling reactions between iodobenzene and acrylates.     

Pd(II) immobilized on mesoporous silica by N-heterocyclic carbene ionic liquids and catalysis for hydrogenation

In this work we synthesized Pd(II) immobilized on mesoporous silica by N-heterocyclic carbene (NHC) ionic liquids (ILs) with different alkyl chain lengths. The catalysts were characterized by Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), low-angle X-ray powder diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and nitrogen sorption. The catalysts were used for the hydrogenation of alkenes and allyl alcohol. The results indicated that the catalysts were very active, selective, and stable. The selectivity for the hydrogenation of allyl alcohol to 1-propanol increased with the increase of the alkyl chain length of the ILs. The effect of supercritical CO(2) (scCO(2)) on the hydrogenation of allyl alcohol was also studied, and it was demonstrated that scCO(2) could enhance the selectivity of the reaction considerably. The XPS study showed that the valence of Pd(II) remained unchanged under hydrogenation conditions.     

可控碳改性Pd/TiO2用于直接合成双氧水:非均相界面对催化性能的影响（英文）

双氧水(H2O2)是一种重要的绿色氧化剂,广泛应用于纺织、医疗、废水处理、军事等重要领域.目前, H2O2的工业生产以蒽醌法为主,该法设备投资大、运行成本高,同时工艺涉及大量的有机溶液,活性中间体蒽醌也会发生缓慢降解,产生有毒副产物.与蒽醌法相比,通过负载型贵金属催化剂催化H2与O2反应直接合成H2O2,过程绿色环保且生产工艺简单,引起了各界广泛关注.然而,从热力学上分析, H2和O2更容易反应生成H2O, H2O2只是该反应的中间产物,会继续发生加氢和直接分解反应生成H2O,导致H2和O2的低效利用,开发高H2O2选择性且高反应效率的催化剂已成为氢氧直接合成H2O2研究的重点与难点.目前大部分研究策略旨在通过调控或影响反应中心结构、价态来抑制H2O2的副反应,进而提升H2O2的选择性和反应效率;尽管已取得了良好的进展,但仍需发展新的调控策略来满足工业应用的要求.本课题组前期研究表明,促使H2O2从催化剂上脱附可以有效地提升H2O2的选择性和产率.相比于针对反应中心的调控,不稳定的H2O2从催化剂上快速脱附同样起到抑制H2O2参与副反应的作用.为此,本文提出一种炭量可控的非均一界面改性方法,以常规的Pd/TiO2作为研究对象,借助各种结构表征,发现炭物种在TiO2表面呈非均一分散状态,而且改性对于催化剂的几何结构影响较小;另外,催化剂表面的疏水性会随着碳含量的增加而增加,导致其与H2O2间的吸附能相应变小.反应结果显示,表面非均一的炭化改性技术可以显著提升Pd/TiO2催化剂的H2O2选择性和产率.通过构效关系分析,可知这种改性技术可以保持Pd颗粒与TiO2间相互作用的同时,还可以促进H2O2的快速脱附,进而提升改性Pd/TiO2催化剂的H2O2直接合成效率.该改性方法简单、易控,可拓展应用到其他类型催化剂的H2O2直接合成性能调控与改进.     

Synthesis and characterization of Pd catalysts supported on carbon microspheres for formic acid oxidation

A facile preparation of Pd catalyst using carbon microspheres as support was introduced in this paper. The carbon microspheres were prepared with a simple method from dextrose via hydrothermal process and used as catalysts support for formic acid electrooxidation. Transmission electron microscopy (TEM) and X-ray diffraction (XRD) analyses revealed that the as-prepared face-centered cubic crystal Pd nanoparticles were well-dispersed on the surface of the carbon microspheres, and the mean diameter of the nanoparticles was 8.8 nm. The effect of the support on the catalyst performance for formic acid electrooxidation was studied. The as-prepared catalyst showed the enhanced electrochemical surface active area and the higher electrocatalytic activity towards formic acid oxidation compared with Pd/CNTs and Pd/XC-72 catalysts prepared at room temperature. Electrochemical analysis suggested that the carbon microspheres might be good candidates to be used as the supports of catalyst for formic acid electrochemical oxidation.     

Enantioselective hydrogenation of α-phenylcinnamic acids over cinchonidine-modified Pd/C commercial catalysts

Enantioselective hydrogenation of α-phenylcinnamic acid (PCA) and p,p′-dimethoxyphenylcinnamic acid (DMPCA) was studied over a variety of commercial 5 % Pd/C catalysts to reveal catalyst properties suitable for obtaining high enantioselectivity. The catalysts were characterized by CO adsorption, X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). It is confirmed that pretreatment at 353 K under atmospheric pressure of H₂ before modification with cinchonidine is very effective for all the Pd/C catalysts used here to improve the selectivity and reaction rate. It is suggested that the distribution of Pd metal particles is crucial to attain high selectivity (ee% = 79 ± 1 for PCA, 89 ± 2 for DMPCA): a uniform or eggshell-type distribution of Pd is more suitable than an egg-white or egg-yolk-type distribution. It is also suggested that the dispersion of Pd metal particles controls the enantioselectivity over cinchonidine (CD)-modified Pd/C catalysts. XPS techniques are proposed to provide a convenient method to find desirable catalysts. The choice of such Pd/C catalysts could facilitate high-throughput guided study on highly enantioselective hydrogenation of α,β-unsaturated carboxylic acids.     

Anchored Pd complex in MCM-41 and MCM-48: novel heterogeneous catalysts for hydrocarboxylation of aryl olefins and alcohols

We report here, for the first time, synthesis of anchored Pd complexes in mesoporous supports such as MCM-41 and MCM-48 as true heterogeneous catalysts for hydrocarboxylation of aryl olefins and alcohols to give excellent conversion ( approximately 100%) and regioselectivity ( approximately 99%) for 2-arylpropionic acids. The catalysts were characterized by powder-XRD, 31P CP-MAS NMR, FT-IR, TEM, XPS and ICP-AES. Recycle studies with these anchored Pd mesoporous catalysts were performed to confirm true heterogeneity.     

Preparation of carbon supported Pd–Pb hollow nanospheres and their electrocatalytic activities for formic acid oxidation

Pd–Pb hollow nanospheres dispersed on carbon black were developed by a galvanic replacement reaction between sacrificial cobalt nanoparticles and Pd²⁺, Pb²⁺ ions. The as-prepared catalysts were characterized by transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX), and X-ray diffraction (XRD). The electrochemical measurements show that the as-prepared catalysts have excellent catalytic activity for formic acid electrooxidation, which is attributed to the large surface area caused by the hollow structure and the lead doping effect which might modify the electronic structure of the catalysts.     

CeO_2修饰炭载体负载PdPt二元合金催化剂及其在甲酸氧化电催化中的应用

用CeO2修饰炭粉做载体,使用有机溶胶法还原PdPt二元合金的方法制备了一系列PdPt/CeO2-C催化剂.借助电化学测试,探讨催化剂中不同Pd与Pt原子比例的PdPt二元合金和不同含量的CeO2对于甲酸电氧化催化活性的影响.不断减少PdPt合金中Pt的比例可以促使甲酸氧化的起始电位前移,当Pd：Pt=15：1时氧化电流出现极值;同时,随着催化剂中CeO2含量的增加,催化剂对于HCOOH氧化的电流密度增加,当含量为15%时达到最大值.相对于Pd/C催化剂,在Pd15Pt1/15CeO2-C催化剂表面的甲酸氧化反应起始电位负移至少0.1V,氧化的电流密度提高60%以上.结合X射线衍射（XRD）,X射线光电子能谱（XPS）,透射电镜（TEM）和热重（TG）等测试数据可以发现,当极少量的Pt与Pd形成合金,Pt与Pd之间产生电子效应,使得合金表面HCOOH氧化的过电位降低;而CeO2的添加不仅有助于PdPt二元合金的分散,更有可能改变甲酸在PdPt表面的氧化反应路径,发挥双功能机理.     

钙改性的Pd/CeO2-ZrO2-Al2O3催化剂催化甲醇裂解反应

采用共沉淀法制备了未改性的和Ca掺杂的CeO2-ZrO2-Al2O3样品,进一步用浸渍法制备了Pd/CeO2-ZrO2-Al2O3(Pd/CZA)和Pd/CeO2-ZrO2-Al2O3-CaO (Pd/CZACa)催化剂.运用X射线衍射、N2吸附-脱附、储氧量测定、CO化学吸附、NH3程序升温脱附、CO2程序升温脱附、...     

Pb促进的Pd/γ-Al2O3催化剂上H2O2氧化甘油反应

制备了Pd含量为1 wt%、不同Pb/Pd摩尔比的γ-Al2O3负载Pd-Pb双金属催化剂,并用于常压、45°C和pH =11条件下H2O2氧化甘油反应中.催化剂的形貌和分散度采用扫描电镜-X射线电子散射谱和透射电镜进行了表征;双金属催化剂中合金相用X射线光电子能谱进行了验证.单金属Pd催化剂上反应结束后甘油转化率为19%,但随着Pb的加入甘油转化率增大到约100%.所制四个不同Pb/Pd原子比的双金属催化剂PdPb0.25, PdPb0.50, PdPb1.00和PdPb1.60均可氧化甘油至二羟基丙酮(DIHA),反应结束后DIHA选择性分别可达59%,58%,34%和25%.     

Effect of hydrothermal treatment on the physicochemical characteristics of Pd/C composites prepared <Emphasis Type="Italic">via</Emphasis> pyrolysis of sawdust impregnated with palladium nitrate

Palladium supported on carbon (Pd/C) catalysts (0.55–0.65 wt.% of Pd) were synthesized by pyrolysis of birch sawdust under inert atmosphere proceeded by prolonged impregnation of sawdust in aqueous solution of palladium nitrate. In some cases, hydrothermal treatment (HT) of the pristine sawdust was conducted to modify the specific surface area of the final carbon material applied as a catalyst support. Based on low-temperature nitrogen adsorption technique, it was postulated that HT of sawdust in the liquid phase increases. while HT in the gaseous phase decreases the specific surface area of Pd/C. The obtained catalysts contained Pd particles (size ranged from 2 to 10 nm) both coated and not coated with carbon shell as evidenced by XPS and TEM techniques. The synthesized Pd/C composites provide high conversion of chlorobenzene and high selectivity in respect to benzene in hydrodechlorination reaction performed in a flow fixed-bed reactor in the presence of H₂. XPS data for Pd/C composites tested in the catalytic reaction indicate their high resistance to HCl. A minor part of metal Pd was found to transform into PdCl₂ and PdO.     

Porous polymer supported palladium catalyst for cross coupling reactions with high activity and recyclability

Porous polymer supported palladium catalyst for cross coupling reactions with high activity has been successfully prepared by coordination of Pd 2+ species with Schiff bases functionalized porous polymer. The catalyst has been systemically investi-gated by a series of characterizations such as TEM, N 2 adsorption, NMR, IR, XPS, etc. TEM and N 2 isotherms show that the sample maintains the nanoporous structure after the modification and coordination. XPS results show that chemical state of palladium species in the catalyst is mainly +2. More importantly, the catalyst shows very high activities and excellent recycla-bility in a series of coupling reactions including Suzuki, Sonogashira, and Heck reactions. Hot filtration and poison of catalysts experiments have also been performed and the results indicate that soluble active species (mainly Pd(0) species) in-situ gener-ated from the catalyst under the reaction conditions are the active intermediates, which would redeposit to the supporter after the reactions.     

Pd‐Nanoparticle‐Supported,PDDA‐Functionalized Graphene as a Promising Catalyst for Alcohol Oxidation

Poly(diallyldimethylammonium chloride) (PDDA) has been employed as a modifying material for the development of new functional materials; then, the functionalized graphene was employed as a support for Pd nanoparticles through a facile method. The structures and morphologies of the as‐synthesized Pd/PDDA–graphene composites were extensively characterized by Raman spectroscopy, XRD, XPS, and TEM. Morphological observation showed that Pd NPs with average diameters of 4.4 nm were evenly deposited over the functionalized graphene sheets. Moreover, the electrochemical experiments indicated that the Pd/PDDA–graphene catalyst showed improved electrocatalytic activity toward alcohol‐oxidation reactions compared to the Pd/graphene and commercial Pd/C systems, as well as previously reported Pd‐based catalysts. This study demonstrates the great potential of PDDA‐functionalized graphene as a support for the development of metal–graphene nanocomposites for important applications in fuel cells.     

脂肪腈加氢胺化过程中Pd/C催化剂失活原因探讨

以活性炭为载体,负载氯化钯溶液,制备钯/炭催化剂,在循环使用于催化脂肪腈加氢制备单烷基二甲基叔胺时发现,催化剂活性持续下降。通过氮吸附、热重分析、X射线能谱和透射电子显微镜等手段,对催化剂失活前后的表面积、孔径分布变化、催化剂的失重状况、Pd的价态变化以及Pd晶粒的粒径变化研究表明,导致钯/炭催化剂失活的原因主要是反应过程中积炭的生成、Pd的价态变化和Pd晶粒粒径的增大。