基于浸入边界法的鱼体自主游动的数值模拟

对游动或飞行生物自主运动特性的深入研究,可促进仿生学的进一步发展。本文以"C"型游动鱼作为研究对象,建立了自主游动的柔性鱼模型。此模型较为真实地反映了鱼自主游动时鱼体内力(由鱼体肌肉收缩提供)、鱼体运动和外界流体之间的耦合作用。基于传统的反馈力方法和混合有限元浸入边界法对鱼的自主游动进行了数值模拟。分析了鱼自主游动启动阶段和巡游阶段流场特性及鱼体运动特征。模拟结果表明,受到鱼体自身组织结构和外界流场作用,鱼游动时通过呈"C"型和类"S"型的不断转换,以获取能量,实现鱼体自主游动。     

两种浸入式边界方法的比较

介绍两类不同的浸入式边界方法及其对它的改进. 然后采用均匀矩形交错网格和压力校正投影法,对不可压流场中的二维圆柱绕流进行了数值求解并对比了两类方法的精度.计算分析表明,连续显力法具有构造简单,适用性强的优点. 但离散隐力法在物面边界精度上要优于前者. 改进后,在二阶精度的离散格式下物面边界精度较低的显示力源法的精度有一定提高,同时发现,加密网格以提高数值精度的方法对于连续显力法并不总是有效.而同样格式下,离散隐力法具有更高精度,其中预测-校正离散隐力法可以在此基础上获得更小的计算误差和更快的收敛速度. 数值解与文献已有的数值和实验结果吻合得很好,表明边界算法及其程序是可靠和有效的.      

一种模拟动边界绕流的锐利界面浸入边界法

为避免复杂贴体网格的更新和畸形对动边界流场计算效率、精度的影响,以充分掌握结构场的受力特性,采用一种改进的锐利界面（sharp-interface）浸入边界法模拟具有动边界绕流的流动问题。该方法将计算域中的固体视为流体,固体边界离散为若干个拉格朗日网格点,通过在界面单元处插值重构流动参数（速度）,将其直接作为流动求解器的边界条件,由此来反映固体边界的影响。即通过构造“虚拟点—受力点—垂足点”的计算结构,借助双线性插值得到虚拟点的速度,再通过强制满足固体边界的无滑移条件计算出受力点的速度,以此为边界条件,最终求解基于浸入边界法的耦合系统方程,实现复杂动边界的流动数值模拟。采用C++编写该浸入边界法的数值程序,以单圆柱绕流为验证算例,通过与文献和实验结果的对比,验证了该方法的准确性和可靠性。在此基础上,对主动运动椭圆柱绕流问题进行了精细计算,探讨了不同轴长比(A_R)、不同攻角($ \theta $)下的椭圆柱对尾涡结构分布特征和水力不稳定现象的影响。捕捉到了反对称S型、“P+S” Ⅰ型、“P+S” Ⅱ型尾涡脱落模态,漩涡强度、涡脱频率和升阻比随A_R和$ \theta $的变化规律,以及确定了升阻比临界攻角(25°)。

     

不可压粘性流体浸入边界直接力法及软件实现

浸入边界法通过在N-S方程中施加体积力模拟不可滑移固壁边界及动边界,避免生成复杂贴体网格及动网格,极大地节省了网格建模时间及动网格计算消耗。本文提出一种新型附加体积力简化计算方法,将简化附加体积力以源项形式嵌入动量方程迭代中,通过用户自定义函数对CFD软件FLUENT二次开发,实现了浸入边界法和通用流体力学求解器的耦合计算。通过静止圆柱和动圆柱绕流数值模拟进行了验证,并探讨了插值函数对计算精度的影响。研究表明,通过引入浸入边界模型,能够提高计算效率,并实现结构网格背景下复杂边界和动边界的高效建模。     

浸入式边界方法的研究及应用进展

本文总结了浸入式边界方法 (immersed bundary method, IB method)中的力源建模研究进展,并且对该方法在诸如生物体绕流及流固耦合等典型的复杂边界以及运动边界问题中的应用进行了介绍.边界精度低是IB方法主要特征之一,但该方法目前在计算气动声学等高精度计算中同样有所应用.最后本文对IB方法在处理高雷诺数流动问题上所面临的挑战以及目前研究进展和未来发展方向进行了介绍.     

一种强耦合预估-校正浸入边界法

为克服传统浸入边界法的质量不守恒缺陷,提出了一种用于可压缩流固耦合问题的强耦合预估-校正浸入边界法。通过阐述一般流固耦合系统的矩阵表示,推导了流固耦合系统的强耦合Gauss-Seidel迭代格式,进一步导出预估-校正格式,提出了预估-校正浸入边界法。该方法使用无耦合边界模型对流体进行预估,将流固耦合边界视为自由面,固体原本占据的空间初始化为零质量的单元,允许流体自由穿过耦合边界。对于流体的计算,使用带有minmod限制器的二阶MUSCL有限体积格式和基于Zha-Bilgen分裂的AUSM+-up方法,配合三阶Runge-Kutta格式推进时间步。在校正步骤中,通过一组质量守恒的输运规则来实现输运过程。输运算法可概括为将边界内侧的流体进行标记,根据标记顺序以均匀方式分割和移动流体,产生一个指向边界外侧的流动,最后在边界附近施加速度校正保证无滑移条件。标记和输运算法避免了繁琐的对截断单元的几何处理,确保了算法易于实现。对于固体的计算,分别采用一阶差分格式和隐式动力学有限元格式求解刚体和线弹性体,并利用高斯积分获得固体表面的耦合力。使用预估-校正浸入边界法计算了一维问题和二维问题。在一维活塞问题中,获得了压力分布、相对质量历史和误差曲线,并与其他方法进行了对比。在二维的激波冲击平板问题中,获得了数值模拟纹影和平板结构的挠度历史,并与实验结果进行了对比。研究表明,该方法区别于传统的虚拟网格方法和截断单元方法,能够精确地维持流场的质量守恒并易于实现,且具有一阶收敛精度,能够较准确地预测激波绕射后的流场以及平板在激波作用下的挠度,为开发流固耦合算法提供了一种新的思路。     

基于反馈力浸入边界法模拟复杂动边界流动

浸入边界法是模拟流固耦合的重要数值方法之一。本文采用反馈力浸入边界方法,对旋转圆柱和水轮机活动导叶旋转摆动绕流后的动边界流场进行数值模拟。其中,固体边界采用一系列离散的点近似代替,流体为不可压缩牛顿流体,使用笛卡尔自适应加密网格,利用有限差分法进行求解。固体对流场的作用通过构造适宜的反馈力函数实现。本文首先通过旋转圆柱绕流的计算结果同实验结果进行对比,吻合较好,验证了该计算方法的可靠性。然后针对水电站水力过渡过程中水轮机活动导叶旋转摆动绕流后的动边界流场进行数值模拟,得到导叶动态绕流后的流场分布特性和涡结构的演化特性。     

风力机气动特性的浸入边界法模拟1)

风力发电机的空气动力学性能是决定风力机安全与效率的最重要因素之一。但由于影响风力机气动性能的参数众多,更加高效精确地模拟风力机气动特性一直是风力机的重要发展方向。本文提出了基于浸入边界法的风力机建模,网格离散,以及数值模拟的统一性框架。利用同伦变形来生成光滑的叶片模型,并且使用仿射变换来处理叶片的渐缩与扭转问题。首先,针对二维翼型的升阻力,检验了算法的数值精度。表明此方法对于阻力的模拟具有非常严格的一阶精度,进而提出采用理查森外推法来精确高效修正升阻力模拟结果。同时,模拟研究了拱曲度以及厚度对二维翼型升阻力的影响。随后,模拟研究了单风力机(包含塔架)在不同尖速比下的功率系数,并对塔架与叶片间的相互气动作用进行了初步分析。最后,模拟研究了双风力机在风场中不同前后间隔距离下的气动干涉问题。本文主要意义在于验证建模,离散,与数值模拟的一体化框架的有效可行性,进而为后续研究(给定约束下风力机自动优化选型)提供坚实基础。     

适用于浸入边界法的大涡模拟紊流壁面模型

基于近壁定常剪切应力假设,提出了一种新的适用于浸入边界法的大涡模拟紊流壁面模型。通过引入壁面滑移速度,修正了线性速度剖面计算得到的壁面剪切应力,使之满足Werner-Wengle模型。将其应用于平板紊流和高Re数圆管紊流的数值模拟,对比采用和不采用壁面模型的结果得知,采用此模型的速度剖面与实验值吻合良好,验证了此模型的有效性。研究了不同欧拉/拉格朗日网格相对位置对结果的影响,证明了此模型具有较好的鲁棒性,以及可根据局部流动状态和网格精度自动开闭的特点。     

分块法研究圆柱绕流升阻力

使用新的分块耦合方法，分别对单圆柱和串列双圆柱绕流进行了数值模拟．对于单圆柱绕流，低Re下计算所得到的定常涡尺寸与实验非常接近．对于串列双圆柱绕流，研究分析了改变双圆柱中心间距对上下游圆柱的升阻力系数和脉动频率所产生的影响，计算结果与实验非常吻合，为进一步研究涡致振动提供了依据．     

Adaptive mesh refinement for simulating fluid-structure interaction using a sharp interface immersed boundary method

In this article, adaptive mesh refinement (AMR) is performed to simulate flow around both stationary and moving boundaries. The finite-difference approach is applied along with a sharp interface immersed boundary (IB) method. The Lagrangian polynomial is employed to facilitate the interpolation from a coarse to a fine grid level, while a weighted-average formula is used to transfer variables inversely. To save memory, the finest grid is only generated in the local areas close to the wall boundary, and the mesh is dynamically reconstructed based on the location of the wall boundary. The Navier-Stokes equations are numerically solved through the second-order central difference scheme in space and the third-order Runge-Kutta time integration. Flow around a circular cylinder rotating in a square domain is firstly simulated to examine the accuracy and convergence rate. Then three cases are investigated to test the validity of the present method: flow past a stationary circular cylinder at low Reynolds numbers, flow past a forced oscillating circular cylinder in the transverse direction at various frequencies, and a free circular cylinder subjected to vortex-induced vibration in two degrees of freedom. Computational results agree well with these in the literature and the flow fields are smooth around the interface of different refinement levels. The effect of refinement level has also been evaluated. In addition, a study for the computational efficiency shows that the AMR approach is helpful to reduce the total node number and speed up the time integration, which could prompt the application of the IB method when a great near-wall spatial resolution is required.     

A DNS study of jet control with microjets using an immersed boundary method

In this work, a microjet arrangement to control a turbulent jet is studied by means of direct numerical simulation. A customised numerical strategy was developed to investigate the interactions between the microjets and the turbulent jet. This approach is based on an improved immersed boundary method in order to reproduce realistically the control device while being compatible with the accuracy and the parallel strategy of the in-house code Incompact3d. The 16 converging microjets, so-called fluidevrons, lead to an increase of the turbulent kinetic energy in the near-nozzle region through an excitation at small scale caused by the interaction between the fluidevrons and the main jet. As a consequence, very intense unstable ejections are produced from the centre of the jet toward its surrounding. Further downstream, the turbulent kinetic energy levels are lower with a lengthening of the potential core compared to a natural jet, in agreement with experimental results.     

A ghost-cell immersed boundary method for large-eddy simulations of compressible turbulent flows

A methodology to perform a ghost-cell-based immersed boundary method (GCIBM) is presented for simulating compressible turbulent flows around complex geometries. In this method, the boundary condition on the immersed boundary is enforced through the use of ‘ghost cells’ that are located inside the solid body. The computations of variables on these ghost cells are achieved using linear interpolation schemes. The validity and applicability of the proposed method is verified using a three-dimensional (3D) flow over a circular cylinder, and a large-eddy simulation of fully developed 3D turbulent flow in a channel with a wavy surface. The results agree well with the previous numerical and experimental results, given that the grid resolution is reasonably fine. To demonstrate the capability of the method for higher Mach numbers, supersonic turbulent flow over a circular cylinder is presented. While more work still needs to be done to demonstrate higher robustness and accuracy, the present work provides interesting insights using the GCIBM for the compressible flows.     

Moving immersed boundary method

A novel implicit immersed boundary method of high accuracy and efficiency is presented for the simulation of incompressible viscous flow over complex stationary or moving solid boundaries. A boundary force is often introduced in many immersed boundary methods to mimic the presence of solid boundary, such that the overall simulation can be performed on a simple Cartesian grid. The current method inherits this idea and considers the boundary force as a Lagrange multiplier to enforce the no‐slip constraint at the solid boundary, instead of applying constitutional relations for rigid bodies. Hence excessive constraint on the time step is circumvented, and the time step only depends on the discretization of fluid Navier‐Stokes equations, like the CFL condition in present work. To determine the boundary force, an additional moving force equation is derived. The dimension of this derived system is proportional to the number of Lagrangian points describing the solid boundaries, which makes the method very suitable for moving boundary problems since the time for matrix update and system solving is not significant. The force coefficient matrix is made symmetric and positive definite so that the conjugate gradient method can solve the system quickly. The proposed immersed boundary method is incorporated into the fluid solver with a second‐order accurate projection method as a plug‐in. The overall scheme is handled under an efficient fractional step framework, namely, prediction, forcing, and projection. Various simulations are performed to validate current method, and the results compare well with previous experimental and numerical studies.     

An immersed boundary method for simulation of inviscid compressible flows

In this paper, an immersed boundary method for simulating inviscid compressible flows governed by Euler equations is presented. All the mesh points are classified as interior computed points, immersed boundary points (interior points closest to the solid boundary), and exterior points that are blanked out of computation. The flow variables at an immersed boundary point are determined via the approximate form of solution in the direction normal to the wall boundary. The normal velocity is evaluated by applying the no‐penetration boundary condition, and therefore, the influence of solid wall in the inviscid flow is taken into account. The pressure is computed with the local simplified momentum equation, and the density and the tangential velocity are evaluated by using the constant‐entropy relation and the constant‐total‐enthalpy relation, respectively. With a local coordinate system, the present method has been extended easily to the three‐dimensional case. The present work is the first endeavor to extend the idea of hybrid Cartesian/immersed boundary approach to compressible inviscid flows. The tedious task of handling multi‐valued points can be eliminated, and the overshoot resulting from the extrapolation for the evaluation of flow variables at exterior points can also be avoided. In order to validate the present method, inviscid compressible flows over fixed and moving bodies have been simulated. All the obtained numerical results show good agreement with available data in the literature. Copyright © 2014 John Wiley & Sons, Ltd.