High performance bioanode based on direct electron transfer of fructose dehydrogenase at gold nanoparticle-modified electrodes

The direct electron transfer reaction of fructose dehydrogenase (FDH) from Gluconobacter sp. on alkanethiol-modified gold nanoparticles (AuNPs) was examined. AuNP-modified electrodes were simply fabricated by depositing citrate-reduced gold nanoparticles onto a gold electrode and carbon fiber paper and then covering the surface with a self-assembled monolayer of alkanethiols. The immobilization of AuNPs provided a large effective surface area for the adsorption of FDH. Catalytic oxidation currents based on the direct electron transfer reaction of FDH were observed from a potential about ?100 mV (vs. Ag/AgCl, 3 M NaCl) in the presence of d-fructose without a mediator. The current density reached as high as 14.3 ± 0.93 mA/cm² (at +500 mV), which was achieved in the presence of 200 mM d-fructose by immobilization of FDH on 2-mercaptoethanol-modified AuNP/carbon fiber paper electrodes.     

NADH oxidation on screen-printed electrode modified with a new phenothiazine diazonium salt

NADH oxidation catalysts are extremely important in the field of electrochemical biosensors and enzymatic biofuel cells. Based on the growing diazonium chemistry, we synthesized the diazonium salt of the well-known NADH mediator toluidine blue O. The electrochemical reduction of the diazonium moiety by cyclic voltammetry onto a screen-printed electrode leads to an electrocatalyst suitable for the oxidation of NADH. The amperometric response for its oxidation shows a maximal current of 1.2 μA ([NADH] = 100 μM). Based on electrochemical measurements, the surface coverage is found to be 3.78 × 10^? 11 mol cm^? 2 and the heterogeneous standard rate constant k_h is 1.21 ± 0.16 s^? 1. The sensitive layer for the oxidation of NADH is improved by electrografting the diazonium salt with a potentiostatic method. Both the surface coverage and the heterogeneous standard rate constant k_h are improved and found to be 6.08 ± 0.63 × 10^? 11 mol cm^? 2 and ~ 5.02 s^? 1, respectively. The amperometric response is also improved by an 8 fold factor, reaching 9.87 μA ([NADH] = 120 μM). These remarkably high values for screen-printed electrodes are comparable to glassy carbon electrodes making this method suitable for low-cost bioelectronical devices.     

Electrochemistry of acetylide anion and anodic formation of carbon films in a LiCl–KCl–CaCl2–CaC2 melt

The electrochemical deposition of carbon films on a nickel substrate was carried out through anodic oxidation of calcium acetylide dissolved in a LiCl–KCl–CaCl₂ melt at 823 K. Continuous and tenacious carbon films were prepared by a two-stage anodically potentiostatic deposition at a fast rate, and characterized by SEM, Raman spectroscopy, XRD and XPS. The results show the carbon films composed of micron-sized particles with graphitized and amorphous phases containing a mixture of sp³ and sp² carbon. The cyclic voltammetry behavior of acetylide anion on graphite and nickel electrodes indicated that C₂^2 − ions are oxidized more favorably on the nickel substrate due to the anodic depolarization from nickel carburization.     

Excited state properties of [Pd0(NHC)(quinone)]2 with NHC = 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene and quinone = 1,4-naphthoquinone

The carbene complex [Pd⁰(NHC)(quinone)]₂with NHC = 1,3-bis(2,4,6-trimethylphenyl)-imidazol-2-ylidene and quinone = 1,4-naphthoquinone shows two long-wavelength absorptions at 312 and 399 nm which are assigned to (NHC→quinone) LLCT and (Pd⁰ → quinone) MLCT transitions. The MLCT state is not reactive, but emissive (λ_max = 564 nm at 77 K). At r.t., the complex undergoes a photoredox decomposition which is initiated by the LLCT state.     

Nanoporous carbon electrode from waste coffee beans for high performance supercapacitors

Activated carbon was produced from waste coffee grounds by treatment with ZnCl₂. Supercapacitor electrodes prepared from this coffee grounds carbon exhibited energy densities up to 20 Wh kg⁻¹ in 1 M H₂SO₄, and excellent stability at high charge–discharge rates. In a two-electrode cell a specific capacitance as high as 368 F g⁻¹ was observed, with rectangular cyclic voltammetry curves and stable performance over 10,000 cycles at a cell potential of 1.2 V and current load of 5 A g⁻¹. The good electrochemical performance of the coffee grounds carbon was attributed to a well developed porosity, with a distribution of micropores and mesopores 2–4 nm wide, and the presence of electrochemically active quinone oxygen groups and nitrogen functional groups. This work highlights the potential to utilize waste biomass to produce electrode materials for cost-effective energy storage systems.     

Direct electron transfer-type four-way bioelectrocatalysis of CO2/formate and NAD+/NADH redox couples by tungsten-containing formate dehydrogenase adsorbed on gold nanoparticle-embedded mesoporous carbon electrodes modified with 4-mercaptopyridine

Tungsten-containing formate dehydrogenase from Methylobacterium extorquens AM1 (FoDH1) catalyzes formate oxidation with NAD⁺. FoDH1 shows little direct communication with carbon electrodes, including mesoporous Ketjen Black-modified glassy carbon electrode (KB/GCE); however, it shows well-defined direct electron transfer (DET)-type bioelectrocatalysis of carbon dioxide reduction, formate oxidation, NAD⁺ reduction, and NADH oxidation on gold nanoparticle (AuNP)-embedded KB/GCE treated with 4-mercaptopyridine. Microscopic measurements reveal that the AuNPs (d = 5 nm) embedded on the KB surface are uniformly dispersed. Electrochemical data indicate that the pyridine moiety on the AuNPs plays important roles in facilitating the interfacial electron transfer kinetics and increasing the probability of productive orientation of FoDH1. The formal potential of the electrochemical communication site, which is most probably an ion‑sulfur cluster, is evaluated as − 0.591 ± 0.005 V vs. Ag | AgCl | sat. KCl from Nernst analysis of the steady-state catalytic waves.     

A novel method for preparing PEMFC electrodes by the ultrasonic and sonoelectrochemical techniques

Novel ultrasonic and sonoelectrochemical methods for preparing Proton Exchange Membrane Fuel Cell (PEMFC) electrodes are described. Platinum loaded on Nafion-bonded carbon anodes in Membrane Electrode Assemblies (MEAs) were prepared in K₂PtCl₄ aqueous solutions by galvanostatic pulse electrodeposition in the absence and presence of power ultrasound (20 kHz). It was found that PEMFC electrodes prepared sonoelectrochemically showed better performance compared to those prepared by (i) galvanostatic pulse method only (i.e. silent conditions) and (ii) conventional method. Maximum power densities of 98.5 mW cm^?2 were found for anodes prepared sonoelectrochemically compared with 91.5 mW cm^?2 (by galvanostatic pulse method alone) and 86 mW cm^?2 (by conventional method).     

Determination of formal potential of NADH/NAD+ redox couple and catalytic oxidation of NADH using poly(phenosafranin)-modified carbon electrodes

The electrochemical regeneration of NADH/NAD⁺ redox couple has been studied using poly(phenosafranin) (PPS)-modified carbon electrodes to evaluate the formal potential and catalytic rate constant for the oxidation of NADH. The PPS-modified electrodes were prepared by electropolymerization of phenosafranin onto different carbon substrates (glassy carbon (GC) and basal-plane pyrolytic graphite (BPPG)) in different electrolytic solutions. The formal potential was estimated to be ? 0.365 ± 0.002 V vs. SHE at pH 7.0. As for the bare carbon electrodes, the oxidation of NADH at the BPPG electrode was found to be enhanced compared with the GC electrode. For the PPS-modified electrodes, it was found that the electrocatalysis of PPS-modified electrodes for the oxidation of NADH largely depends on the carbon substrate and electrolyte solution employed for their preparation, i.e., the PPS-modified BPPG electrode prepared in 0.2 M NaClO₄/acetonitrile solution exhibits an excellent and persistent electrocatalytic property toward NADH oxidation in phosphate buffer solution (pH 7.0) with a diminution of the overpotential of about 740 and 670 mV compared with those at the bare GC electrode and the PPS-modified GC electrode prepared in 0.2 M H₂SO₄ solution, respectively. A quantitative analysis of the electrocatalytic reaction based on rotating disk voltammetry gave the electrocatalytic reaction rate constants of the order of 10³–10⁴ M^?1 s^? 1 depending on the preparation conditions of the PPS-modified electrodes.     

Quasi-reversible two-electron reduction of oxygen at gold electrodes modified with a self-assembled submonolayer of cysteine

The electrochemical reduction of molecular oxygen (O₂) has been performed at gold electrodes modified with a submonolayer of a self-assembly (sub-SAM/Au) of a thiol compound (typically cysteine (CYST)) in O₂-saturated 0.5 M KOH. At bare gold electrode O₂ reduction reaction proceeds irreversibly, while this reaction is totally hindered at gold electrodes with a compact structure of CYST over its surface. The partial reductive desorption of the compact CYST monolayer was achieved by controlling the potential of the CYST/Au electrode, leading to the formation of a submonolayer coverage of the thiol compound over the Au electrode surface (sub-SAM/Au), at which the CYST molecules selectively block the Au(1 0 0) and Au(1 1 0) fractions (the so-called rough domains) of the polycrystalline Au while the Au(1 1 1) component (the so-called smooth domains) remains bare (i.e., uncovered with CYST). This sub-SAM/Au electrode extraordinarily exhibits a quasi-reversible two-electron reduction of molecular oxygen (O₂) in alkaline medium with a peak separation (ΔE_p) between the cathodic and anodic peak potentials (E_p^c,E_p^a) of about 60 mV. The ratio of the anodic current to the cathodic one is close to unity. The formal potential (E^o′) of this reaction is found to equal −150 mV vs. Ag/AgCl/KCl(sat.).     

Preparation of activated carbon from Turbinaria turbinata seaweeds and its use as supercapacitor electrode materials

Turbinaria turbinata brown seaweeds were tested as carbon electrode material in symmetric, electrochemical supercapacitors. The electrochemical properties of the carbon materials were characterised for their application as supercapacitors using cyclic voltammetry, galvanostatic charge/discharge method and electrochemical impedance spectroscopic analyses. Our initial results showed that the optimal behaviour was obtained for the sample prepared by pyrolysis at 800 °C. The average surface area of the carbon was 812 m²/g. Electrochemical tests with an organic electrolyte gave the following interesting results: a capacitance of 74.5 F/g, a specific series resistance of 0.5 Ω cm² and an ionic resistivity of 1.3 Ω cm². These results show the promising capacitive properties of carbon derived from seaweeds and their application in electrochemical supercapacitors.     

Worm-like mesoporous carbon synthesized from metal–organic coordination polymers for supercapacitors

A green and efficient route has been employed to synthesize a worm-like mesoporous carbon with high specific surface area (2587 m² g^?1) and large pore volume (3.14 cm³ g^?1). Three electrochemical methods have been used to measure its electrochemical performance. Worm-like mesoporous carbon performs the high specific capacitance (344 F g^?1) at constant-current densities of 50 mA g^?1.     

Impact of cell-voltage on energy and power performance of supercapacitors with single-walled carbon nanotube electrodes

We report the energy and power voltage-dependencies of supercapacitors using single-walled carbon nanotube electrodes. The energy density was dependent on the cell-voltage cubed (up to 4 V: E = 1.43 × V³). The cubic relationship was attributed to the linear increase of the capacitance as a function of voltage, enabled by electrochemical doping. Furthermore, while up to 3.5 V, the maximum power rating of the nanotube electrodes increased as a function of the cell-voltage squared, beyond 3.5 V, a decline in power was observed as a result of depletion of the electrolyte's ions.     

Preparation of monodisperse carbon nanospheres for electrochemical capacitors

The efficiently hydrothermal route using sucrose without any catalysts is employed to prepare the uniform carbon spheres. The monodisperse 100–150 nm carbon spheres are obtained with the activation treatment in molten KOH. The carbon spheres are characterized by transmission electron microscope, X-ray diffraction, N₂ adsorption, Raman spectroscopy and electrochemical techniques. The relationships of specific capacitance and surface properties of carbon spheres are investigated. A single electrode of carbon nanosphere materials performs excellent specific capacitance (328 F g⁻¹), area capacitance (19.2 μF cm⁻²) and volumetric capacitance (383 F cm⁻³).     

Nanocrystalline FeWO4 as a pseudocapacitive electrode material for high volumetric energy density supercapacitors operated in an aqueous electrolyte

Iron tungstate (FeWO₄) has been synthesized using two low-temperature synthetic routes and investigated as a new pseudocapacitive electrode material for supercapacitors operating in a neutral aqueous electrolyte. Its electrochemical properties are clearly related to the specific surface area and seem to originate from Fe^3 +/Fe^2 + fast surface reactions. For FeWO₄ obtained by polyol-mediated synthesis, a high volumetric capacitance of 210 F·cm^− 3 (i.e. more than two times higher than that of activated carbon) was measured at 20 mV·s^− 1 with less than 5% fade over 10,000 cycles. Furthermore, unlike most of the previously investigated iron based electrodes, a unique pseudocapacitive behavior is observed, thus emphasizing the role of the crystallographic structure on the electrochemical signature.     

Electroreduction of O2 at a mediated Melanocarpus albomyces laccase cathode in a physiological buffer

We report on oxygen reduction in a physiological buffer solution (0.05 M phosphate buffer containing dissolved O₂, 0.1 M NaCl, pH 7.4, 37 °C) by Melanocarpus albomyces laccase, co-immobilized with [Os(2,2’-bipyridine)₂(polyvinylimidazole)₁₀Cl]^+/2+ as a mediator, on glassy carbon electrodes. Such oxygen cathodes yielded current densities of 3.8 mA cm⁻² at 0.2 V vs. Ag/AgCl, the largest current density reported to date for a mediated laccase cathode in physiological buffer solutions, showing promise for development of biocatalytic fuel cell prototypes.     

A microtubular all CNT gas diffusion electrode

We report a microtubular gas diffusion electrodes made of multi-walled carbon nanotubes (MWCNT). The electrodes were prepared by inside-out cake filtration of an aqueous MWCNT suspension onto a microfiltration hollow fiber (HF) membrane, followed by washing out the surfactant, drying and removal of the all CNT microtube from the HF membrane. Length, outer diameter, and wall thickness of the tubular electrodes are: up to 44 cm, ~ 1.7 mm and 275 μm, respectively. The BET surface area is 200 m²/g with a porosity of 48–67% and an electrical conductivity of ~ 20 S/cm. Application of this microtubular Gas Diffusion Electrodes (GDE) was studied for the oxygen reduction reaction (ORR) in divided and undivided electrochemical cells. Oxygen supply into the lumen of the tubular electrodes resulted in much higher current densities for ORR than in experiments where the electrolyte was saturated by bubbling with pure oxygen. Within the 0.25–1.0 bar pressure (gauge) region, higher ORR rates were achieved at lower pressure. We also show that H₂O₂ production is possible using the new GDE. We propose to use such novel electrodes for the fabrication of tubular electrochemical reactors, e.g. fuel cells, H₂O₂ generators, CO₂ reduction and other processes that involve GDE application.     

Measurement of the (pressure,density, temperature) relation of two (methane + nitrogen) gas mixtures at temperatures between 240 and 400 K and pressures up to 20 MPa using an accurate single-sinker densimeter

Comprehensive (p, ρ, T) measurements on two gas mixtures of (0.9CH₄ + 0.1N₂) and (0.8CH₄ + 0.2N₂) have been carried out at six temperatures between 240 and 400 K and at pressures up to 20 MPa. A total of 108 (p, ρ, T) data for the first mixture and 134 for the second one are given. These measurements were performed using a compact single-sinker densimeter based on Archimedes’ buoyancy principle. The overall uncertainty in density ρ is estimated to be (1.5 · 10⁻⁴ · ρ + 2 · 10⁻³ kg · m⁻³) (coverage factor k = 2), the uncertainty in temperature T is estimated to be 0.006 K (coverage factor k = 2), and the uncertainty in pressure p is estimated to be 1 · 10⁻⁴·p (coverage factor k = 2). The equipment has been previously checked with pure nitrogen over the whole temperature and pressure working ranges and experimental results (35 values) are given and a comparison with the reference equation of state for nitrogen is presented.     

A high-performance carbon derived from polyaniline for supercapacitors

Activated carbon derived from rod-shaped polyaniline (the diameter of 170 nm) was synthesized by carbonization and subsequent activation with KOH. The obtained activated carbon exhibits a high specific capacitance (455 F g^?1) and remarkable rate capability due to its high specific surface area (1976 m² g^?1), narrow pore size distribution (< 3 nm) as well as short diffusion length. It is indicated that the promising synthetic method used in this work can pave the way for designing new carbon based materials from different polymers for high-performance energy applications.     

Phage Langmuir monolayers and Langmuir–Blodgett films

Stable, insoluble Langmuir monolayer films composed of Staphylococcus aureus-specific lytic bacteriophage were formed at an air–water interface and characterized. The phage monolayer was very strong, withstanding a surface pressure of ～40 mN/m at 20 °C. The surface pressure–area (Π–A) isotherm possessed a shoulder at ～7 × 10⁴ nm²/phage particle, attributed to a change in phage orientation at the air–water interface from horizontal to vertical capsid-down/tail-up orientation as surface pressure was increased. The Π–A-dependence was accurately described using the Volmer equation of state, assuming horizontal orientation to an air–water interface at low surface pressures with an excluded area per phage particle of 4.6 × 10⁴ nm². At high pressures phage particles followed the space-filling densely packed disks model with a specific area of 8.5 × 10³ nm²/phage particle. Lytic phage monolayers were transferred onto gold-coated silica substrates from the air–water interface at a constant surface pressure of 18 mN/m by Langmuir–Blodgett method, then dried and analyzed by scanning electron microscopy (SEM) and ellipsometry. Phage specific adsorption (Γ) in Langmuir–Blodgett (LB) films measured by SEM was consistent with that calculated independently from Π–A isotherms at the transfer surface pressure of 18 mN/m (Γ = 23 phage particles/μm²). The 50 nm-thickness of phage monolayer measured by ellipsometer agreed well with the horizontal phage average size estimated by SEM. Surface properties of phage Langmuir monolayer compare well with other monolayers formed from nano- and micro-particles at the air–water interface and similar to that of classic amphiphiles 1,2-diphytanoyl-sn-glycero-3-phosphocholine (phospholipid) and stearic acid.     

Activated carbon derived from marine Posidonia Oceanica for electric energy storage

In this paper, the synthesis and characterization of activated carbon from marine Posidonia Oceanica were studied. The activated carbon was prepared by a simple process namely pyrolysis under inert atmosphere. The activated carbon can be used as electrodes for supercapacitor devices. X-ray diffraction result revealed a polycrystalline graphitic structure. While scanning electron microscope investigation showed a layered structure with micropores. The EDS analysis showed that the activated carbon contains the carbon element in high atomic percentage. Electrochemical impedance spectroscopy revealed a capacitive behavior (electrostatic phenomena). The specific capacity per unit area of the electrochemical double layer of activated carbon electrode in sulfuric acid electrolyte was 3.16 F cm⁻². Cyclic voltammetry and galvanostatic chronopotentiometry demonstrated that the electrode has excellent electrochemical reversibility. It has been found that the surface capacitance was strongly related to the specific surface area and pore size.