The effects of different nano particles of Al2O3 and Ag on the MHD nano fluid flow and heat transfer in a microchannel including slip velocity and temperature jump

The forced convection of nanofluid flow in a long microchannel is studied numerically according to the finite volume approach and by using a developed computer code. Microchannel domain is under the influence of a magnetic field with uniform strength. The hot inlet nanofluid is cooled by the heat exchange with the cold microchannel walls. Different types of nanoparticles such as Al₂O₃ and Ag are examined while the base fluid is considered as water. Reynolds number are chosen as Re=10 and Re=100. Slip velocity and temperature jump boundary conditions are simulated along the microchannel walls at different values of slip coefficient for different amounts of Hartmann number. The investigation of magnetic field effect on slip velocity and temperature jump of nanofluid is presented for the first time. The results are shown as streamlines and isotherms; moreover the profiles of slip velocity and temperature jump are drawn. It is observed that more slip coefficient corresponds to less Nusselt number and more slip velocity especially at larger Hartmann number. It is recommended to use Al₂O₃-water nanofluid instead of Ag-water to increase the heat transfer rate from the microchannel walls at low values of Re. However at larger amounts of Re, the nanofluid composed of nanoparticles with higher thermal conductivity works better.     

The numerical investigation of heat transfer and pressure drop of turbulent flow in a triangular microchannel

In this presentation, the flow and heat transfer inside a microchannel with a triangular section, have been numerically simulated. In this three-dimensional simulation, the flow has been considered turbulent. In order to increase the heat transfer of the channel walls, the semi-truncated and semi-attached ribs have been placed inside the channel and the effect of forms and numbers of ribs has been studied. In this research, the base fluid is Water and the effect of volume fraction of Al₂O₃ nanoparticles on the amount of heat transfer and physics of flow have been investigated. The presented results are including of the distribution of Nusselt number in the channel, friction coefficient and Performance Evaluation Criterion of each different arrangement. The results indicate that, the ribs affect the physics of flow and their influence is absolutely related to Reynolds number of flow. Also, the investigation of the used semi-truncated and semi-attached ribs in Reynolds number indicates that, although heat transfer increases, but more pressure drop arises. Therefore, in this method, in order to improve the heat transfer from the walls of microchannel on the constant heat flux, using the pump is demanded.     

Influence of conduction heat loss on enhancing the heat transfer performance of a square flat plate with constant heat flux by an impinging jet in cross-flows

An experimental setup was built to study the influence of conduction heat loss on the convective heat transfer performance enhanced by an impinging jet in cross-flows. Results revealed that the conduction heat loss ratio (E_c/E) is between 12.0% and 40.1%, and it decreases nonlinearly with the ratio of jet-to-cross-flow velocity. The relative Nusselt number increases with the ratio of jet-to-cross-flow velocity. The maximum peak value and the average are 8.1 and 6.4, respectively. The distribution of the relative Nusselt number seems to be flattened by assuming a constant conduction heat loss ratio.     

Effects of magnetic field and wall slip conditions on the peristaltic transport of a Newtonian fluid in an asymmetric channel

The effects of both magnetic field and wall slip conditions on the peristaltic transport of a Newtonian fluid in an asymmetric channel are studied analytically and numerically. The channel asymmetry is generated by propagation of waves on the channel walls travelling with different amplitudes, phases but with the same speed. The long wavelength and low Reynolds number assumptions are considered in obtaining solution for the flow. The flow is investigated in a wave frame of reference moving with velocity of the wave. Closed form expressions have been obtained for the stream function and the axial velocity component in fixed frame. The effects of phase difference, Knudsen number and magnetic field on the pumping characteristics and velocity field are discussed. Several known results of interest are found to follow as particular cases of the solution of the problem considered.     

The effects of porosity and permeability on fluid flow and heat transfer of multi walled carbon nano-tubes suspended in oil (MWCNT/Oil nano-fluid) in a microchannel filled with a porous medium

The forced convection heat transfer and laminar flow in a two-dimensional microchannel filled with a porous medium is numerically investigated. The nano-particles which have been used are multi walled carbon nano-tubes (MWCNT) suspended in oil as the based fluid. The assumption of no-slip condition between the base fluid and nano-particles as well as the thermal equilibrium between them allows us to study the nanofluid in a single phase. The nanofluid flow through the microchannel has been modeled using the Darcy–Forchheimer equation. It is also assumed that there is a thermal equilibrium between the solid phase and the nanofluid for energy transfer. The walls of the microchannel are under the influence of a fluctuating heat flux. Also, the slip velocity boundary condition has been assumed along the walls. The effects of Darcy number, porosity and slip coefficients and Reynolds number on the velocity and temperature profiles and Nusselt number will be studied in this research.     

Hall effect on MHD flow and heat transfer of nanofluids over a stretching wedge in the presence of velocity slip and Joule heating

This paper deals with the boundary layer flow and heat transfer of nanofluids over a stretching wedge with velocity-slip boundary conditions. In this analysis, Hall effect and Joule heating are taken into consideration. Four different types of water-base nanofluids containing copper (Cu), silver (Ag), alumina (Al₂O₃), and titania (TiO₂) nanoparticles are analyzed. The partial differential equations governing the flow and temperature fields are converted into a system of nonlinear ordinary differential equations using a similarity transformation. The resulting similarity equations are then solved by using the shooting technique along with the fourth order Runge-Kutta method. The effects of types of nanoparticles, the volume fraction of nanoparticles, the magnetic parameter, the Hall parameter, the wedge angle parameter, and the velocityslip parameter on the velocity and temperature fields are discussed and presented graphically, respectively.     

Influence of T-semi attached rib on turbulent flow and heat transfer parameters of a silver-water nanofluid with different volume fractions in a three-dimensional trapezoidal microchannel

This study aimed at exploring influence of T-semi attached rib on the turbulent flow and heat transfer parameters of a silver-water nanofluid with different volume fractions in a three-dimensional trapezoidal microchannel. For this purpose, convection heat transfer of the silver-water nanofluid in a ribbed microchannel was numerically studied under a constant heat flux on upper and lower walls as well as isolated side walls. Calculations were done for a range of Reynolds numbers between 10,000 and 16,000, and in four different sorts of serrations with proportion of rib width to hole of serration width (R/W). The results of this research are presented as the coefficient of friction, Nusselt number, heat transfer coefficient and thermal efficiency, four different R/W microchannels. The results of numerical modeling showed that the fluid's convection heat transfer coefficient is increased as the Reynolds number and volume fraction of solid nanoparticle are increased. For R/W=0.5, it was also maximum for all the volume fractions of nanoparticle and different Reynolds numbers in comparison to other similar R/W situations. That's while friction coefficient, pressure drop and pumping power is maximum for serration with R/W=0 compared to other serration ratios which lead to decreased fluid-heat transfer performance.     

Experimental investigation of heat transfer and friction coefficient of the water/graphene oxide nanofluid in a pipe containing twisted tape inserts under air cross-flow

The water/graphene oxide nanofluid effect in a pipe equipped by twisted tape inserts under air cross-flow is investigated and the optimal tape geometry is determined. The range of internal and external Reynolds numbers are: 3800<Re_o<21500 and 550<Re_i<2000. Heat transfer and pressure drop increase by increasing Re and inserts width and heat transfer performance coefficient increased up to 1.4, indicating enhanced heat transfer compared to undesirable pressure drop. On the other hand, the heat transfer coefficient is 26% higher when compared with water in a plain tube. According to the results, this method is a good alternative in heat exchangers.     

The BMV experiment: a novel apparatus to study the propagation of light in a transverse magnetic field

In this paper, we describe in detail the BMV (Biréfringence Magnétique du Vide) experiment, a novel apparatus to study the propagation of light in a transverse magnetic field. It is based on a very high finesse Fabry-Perot cavity and on pulsed magnets specially designed for this purpose. We justify our technical choices and we present the current status and perspectives.     

Algebraic soliton in a ferromagnet in the presence of the magnetic field directed along the anisotropy axis

Magnetic solitons in a one-dimensional ferromagnet with easy-plane anisotropy are considered. Algebraic solitons are discussed and the conditions of existence of such solitons are investigated.     

Blockage effects on viscous fluid flow and heat transfer past a magnetic obstacle in a duct

The effect of lateral walls on fluid flow and heat transfer is investigated when a fluid passes a magnetic obstacle. The blockage ratio β that represents the ratio between the width of external magnet M y and the spanwise width L y is employed to depict the effect. The finite volume method (FVM) based on the PISO algorithm is applied for the blockage ratios of 0.2, 0.3, and 0.4. The results show that the value of Strouhal number St increases as the blockage ratio β increases, and for small β , the variation of St is very small when the interaction parameter and Reynolds number are increasing. Moreover, the cross-stream mixing induced by the magnetic obstacle can enhance the wall-heat transfer and the maximum value of the overall heat transfer increment is about 50.5%.     

Enhancement of turbulence in a stratified fluid by the presence of a shear field

Time-dependent solutions are obtained for turbulent flow in a stratified fluid in the presence of a shear field. Within the stated closure assumptions, it is shown that for certain shear fields that the turbulent intensity is enhanced.     

Entropy generation and MHD natural convection of a nanofluid in an inclined square porous cavity: Effects of a heat sink and source size and location

The effects of a heat sink and the source size and location on the entropy generation, MHD natural convection flow and heat transfer in an inclined porous enclosure filled with a Cu-water nanofluid are investigated numerically. A uniform heat source is located in a part of the bottom wall, and a part of the upper wall of the enclosure is maintained at a cooled temperature, while the remaining parts of these two walls are thermally insulated. Both the left and right walls of the enclosure are considered to be adiabatic. The thermal conductivity and the dynamic viscosity of the nanofluid are represented by different verified experimental correlations that are suitable for each type of nanoparticle. The finite difference methodology is used to solve the dimensionless partial differential equations governing the problem. A comparison with previously published works is performed, and the results show a very good agreement. The results indicate that the Nusselt number decreases via increasing the nanofluid volume fraction as well as the Hartmann number. The best location and size of the heat sink and the heat source considering the thermal performance criteria and magnetic effects are found to be D?=?0.7 and B?=?0.2. The entropy generation, thermal performance criteria and the natural heat transfer of the nanofluid for different sizes and locations of the heat sink and source and for various volume fractions of nanoparticles are also investigated and discussed.     

Provide a suitable range to include the thermal creeping effect on slip velocity and temperature jump of an air flow in a nanochannel by lattice Boltzmann method

The thermal creeping effect on slip velocity of air forced convection through a nanochannel is studied for the first time by using a lattice Boltzmann method. The nanochannel side walls are kept hot while the cold inlet air streams along them. The computations are presented for the wide range of Reynolds number, Knudsen number and Eckert number while slip velocity and temperature jump effects are involved. Moreover appropriate validations are performed versus previous works concerned the micro–nanoflows.The achieved results are shown as the velocity and temperature profiles at different cross sections, streamlines and isotherms and also the values of slip velocity and temperature jump along the nanochannel walls. The ability of the lattice Boltzmann method to simulate the thermal creeping effects on hydrodynamic and thermal domains of flow is shown at this study; so that its effects should be involved at lower values of Eckert number and higher values of Reynolds number especially at entrance region where the most temperature gradient exists.     

Effect of magnetic field and friction force on the velocity autocorrelation in two‐dimensional Yukawa liquids

The effect of an external magnetic field and gas‐induced friction on the velocity autocorrelation of the dust particles in strongly coupled two‐dimensional Yukawa liquids was investigated. The Langevin dynamics computer simulation method was used. The presence of the friction originating from the background gas leads to the disappearance of a collective oscillation mode, corresponding to the cyclotron frequency of the dust particles, and a decrease in the dominant mode.     

Measurement of velocity variations along a wave path in the through-thickness direction in a plate

In this paper there is given a method to predict ultrasonic wave velocity variations along a wave path in the through-thickness direction in a plate from thickness resonance spectra. Thickness resonance spectra are numerically calculated and two simple rules used to predict the entire ultrasonic wave velocity variation are derived. In the calculation, the wave path is assumed to be straight along the thickness direction and the velocity variation is assumed to be either as a parabolic curve dependence or a linear dependence with respect to the distance from the surface and to be symmetric with respect to the plate center. To see if the numerical calculation method is reliable, thickness resonance frequencies of a sample with three-layers were measured by EMAT (electromagnetic acoustic transducer) with a good agreement between the measured and the calculated frequencies. This method can be applied to the ultrasonic measurement of material characteristics, internal stress or various other properties of plate materials.     

Resonant charge transfer in slow H+-H collisions in the presence of a strong magnetic field

Resonant charge transfer in slow H⁺-H collisions proceeding in the presence of a strong, external magnetic field is investigated theoretically for field strengths of order 10⁵ T. Transfer probabilities and cross sections are calculated in a two-state approximation using exact molecular-orbital energies of the magnetically dressed H⁺₂ system. The field-affected cross sections are found to be substantially smaller than the field-free cross sections.     

The role of structural heat exchange and heat loss in the design of efficient silicon micro-combustors

The performance of millimeter-scale combustors intended for miniaturized power and propulsion systems is strongly influenced by heat exchange to and within the combustor structure. Accordingly, a one-dimensional model with full chemistry that includes heat exchange to and within the combustor wall has been developed. It is used to study the effects of axial heat transfer from the post-flame to the pre-flame via wall conduction in a silicon micro-channel combustor with planar symmetry. The simulations show that axial heat transfer widens stability limits, increases the burning rate, and can enable the construction of smaller, higher power density combustors. Axial heat transfer also enhances the benefits of operating at elevated pressures. The simulations also show that heat loss to the environment places a lower bound on the combustor volume. Maximum power density combustor configurations are identified under adiabatic and non-adiabatic conditions. The maximum power density tends to increase with increasing pressure while the micro-channel length and height associated with the maximum tend to decrease.     

Variable fluid properties and variable heat flux effects on the flow and heat transfer in a non-Newtonian Maxwell fluid over an unsteady stretching sheet with slip velocity

The effects of variable fluid properties and variable heat flux on the flow and heat transfer of a non-Newtonian Maxwell fluid over an unsteady stretching sheet in the presence of slip velocity have been studied. The governing differential equations are transformed into a set of coupled non-linear ordinary differential equations and then solved with a numerical technique using appropriate boundary conditions for various physical parameters. The numerical solution for the governing non-linear boundary value problem is based on applying the fourth-order Runge-Kutta method coupled with the shooting technique over the entire range of physical parameters. The effects of various parameters like the viscosity parameter, thermal conductivity parameter, unsteadiness parameter, slip velocity parameter, the Deborah number, and the Prandtl number on the flow and temperature profiles as well as on the local skin-friction coefficient and the local Nusselt number are presented and discussed. Comparison of numerical results is made with the earlier published results under limiting cases.