新型聚丙烯基磺酸型阳离子交换膜的制备与膜体结构研究

以β晶型聚丙烯（ＰＰ）经双轴拉伸制备的新型聚丙烯微孔膜（Ａｓｐｏｒ膜）为基膜,采用浸吸法制血具有两相连续、贯穿的互穿聚合物网络（ＩＰＮ）为膜体结构的聚丙烯／聚（苯乙烯－二乙烯苯）磺酸型阳离子交换膜。应用ＳＥＭ、ＸＰＳ和ＷＡＸＤ手段,分析研究了ＰＰ基膜和离子交换膜（ＩＥＭ）的ＩＰＮ膜体结构及其力学性能的关系。     

四元胶乳互穿聚合物网络的组成对其性能的影响

用分步乳液聚合法合成了具有核壳结构的胶乳互穿聚合物网络ＬＩＰＮ（ＰＭＭＡ－ＰＳ）／（Ｐｎ－ＢＡ－ＰＡＡ）；讨论了ＬＩＰＮ组成对乳液与膜性能的影响，提出了四元ＬＩＰＮ核壳结构的基本轮廓，探讨了软硬单体最佳配比及丙烯酸单体用量。     

聚丙烯微孔膜基渐变聚合物的制备,结构与性能的研究

以聚丙烯微孔膜为基材，通过扩散控制原位共聚合的方法在人填充了组成沿膜的厚度方向逐渐改变的无规共聚物，Ｘ－光电子能谱（ＸＰＳ）、全反射红外光谱（ＡＴＲ）以及动态粘弹谱的分析结果。说明所制备得到的合膜具有明显的渐变聚合物性质。     

聚甲基丙烯酸甲酯Langmuir—Blodgett复合膜及其在光电导体中…

制备了聚甲基丙烯酸甲酯（ＰＭＭＡ）ＬＢ复合膜，将其作为阻挡层首次应用于机能分离型光电导体领域。从π－Ａ曲线发现ＰＭＭＡ单分子膜具有表面压力的各向异性和松弛特性。ＴＥＭ照片显示，ＰＭＭＡ分子链在复合膜中有序排列。转移比、ＵＶ和ＸＰＳ研究表明，复合膜沉积均匀。以ＰＭＭＡ－ＬＢ复合膜作为阻挡层的光电导体表面充电电位Ｖ０＝１５１８Ｖ，光照１ｓ后的光衰百分率△Ｖ１ｓ＝５０．１６％，半衰期ｔ１／２＝０．９３ｓ     

聚苯乙炔LB多层膜及其光电导性能的研究

制备了聚苯乙炔（ＰＰＡ）ＬＢ多层膜，将其作为电荷产生层首次应用于机能分离型光电导体领域．从π Ａ曲线发现，ＰＰＡ单分子膜具有表面压力的各向异性和松弛特性．ＴＥＭ照片显示，ＰＰＡ分子链在ＬＢ膜中有序排列．转移比和ＸＰＳ的研究表明，复合膜沉积均匀．与ＰＰＡ涂膜相比，以ＰＰＡ ＬＢ多层膜作为电荷产生层的光电导体表面充电电位Ｖ０＝１３４５Ｖ，光照１ｓ后的光衰百分比ΔＶ１ｓ＝６５０５％，半衰时间ｔ１／２＝０５８ｓ，具有更优异的光电导性能．     

IPN方法制备PP-Poly(St-Co-DVB)离子交换树脂基膜及性能表征

用苯乙烯和二乙烯基本等配制的混合液浸渍多孔聚丙烯膜，在特制的模具中聚合，经过一系列处理得到无色透明的PP－Poly（St-Co－DVB）复合膜。此膜具有明显优越于聚丙烯和聚苯乙烯的力学性能，是合成高强度的高子交换树脂膜的重要基膜。我们用红外、扫描电镜、X-射线、电子能谱等多种方法研究其结构，指出优异的力学性能来源于内部的互穿网络结构及其在力的作用下的协同作用。     

聚丙烯微孔膜表面的等离子体接枝

通过氢气氛等离子体处理，在聚丙烯微孔膜表面接枝了聚丙烯酸，改善了膜表面的亲水性。接枝率与等离子体放电功率、放电时间和溶液浓度有关，微孔膜内外表面及不同位置接枝效率有差别。接枝后微也膜的表面孔径减少了。     

聚丙烯微孔膜表面的空气等离子体处理

采用空气等离子体对聚丙烯微孔膜进行了处理，膜表面带有了氧元素，表面亲水性增强。微孔膜外表面改性程度较高，而孔内愈往深处改性程度愈弱。空气等离子体处理过的微孔膜力学性能下降。     

聚酰亚胺微孔膜疏水化用于膜蒸馏

采用聚合物表面涂覆改性的方法，将疏水性聚合物硅橡胶涂覆在聚酰亚胺亲水微孔膜上，制得了具有良好膜蒸馏性能的聚酰亚胺疏水微孔复合膜。研究了涂覆工艺条件对所得聚酰亚胺疏水微孔复合膜的膜蒸馏性能的影响。结果表明，控制适当工艺条件可制得具有高膜蒸馏通量的聚酰亚胺微孔复合膜，其透过系数可达２．１７×１０－３ｋｇ／ｍ２·ｈ·Ｐａ。该改性聚酰亚胺疏水微孔复合膜使用３７ｄ后，截留率仍保持在９９．５％以上，具有较长使用寿命。     

等离子体聚合法制备膜蒸馏用疏水微孔复合膜

本文以八氟环丁烷为单体,采用等离子体聚合法将亲水性硝酸纤维素微孔膜改性,制得疏水硝酸纤维素微孔复合膜。所得疏水微孔复合膜可用于膜蒸馏,并具有优良的膜蒸馏性能,其通量达到反渗透水平。利用扫描电镜、X-射线显微分析和XPS等分析手段研究了聚合条件对所得复合膜结构性能的影响.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.