Orange-red luminescence from Cu doped CdS nanophosphor prepared using mixed Langmuir-Blodgett multilayers

Cu doped CdS nanophosphors were fabricated through Langmuir-Blodgett route for the first time. Precursors mixed Langmuir-Blodgett multilayers of cadmium arachidate-copper arachidate were used to grow doped sulfide nanoparticles within the organic matrix through postdeposition treatment with H(2)S gas. Changes in composition and layered structure of precursor multilayers were studied using Fourier transform infrared and x-ray reflection. Uptake of Cu in the multilayers was analyzed by inductively coupled plasma atomic emission spectroscopy measurements. Unannealed H(2)S exposed multilayers containing CdS nanoparticles show strong surface state emission centered at approximately 570 nm, whereas Cu doped CdS nanoparticles show orange-red luminescence. Photoluminescence (PL) spectra of annealed-Cu doped CdS nanoparticles show distinct Cu-related emission compared to annealed-undoped CdS nanoparticles. Power dependent PL measurements of annealed samples show that an efficient carrier recombination takes place at T(2) level of Cu(++). The carrier relaxation from the excitonic states to T(2) level results in the strong orange-red luminescence.     

CdS-containing nano-assemblies of double hydrophilic block copolymers in water

Two samples of poly(sodium(sulfamate-carboxylate)isoprene)-block-poly(ethylene oxide) copolymer (SCIEO-1 and SCIEO-2) differing in molecular weight and relative length of polyelectrolyte blocks have been used as templates for the synthesis of cadmium sulfide (CdS) nanoparticles in aqueous media. The double-hydrophilic copolymer SCIEO has very high 1D charge density, and its polymer chain structure mimics that of polysaccharide heparin. It is soluble in aqueous media, but the addition of cadmium acetate (Cd(Ac)₂) to its aqueous solution causes the formation of micellar aggregates with Cd²⁺containing insoluble cores above the threshold Cd²⁺ concentration. The trapped Cd²⁺ ions can be chemically transformed to CdS nanoparticles. The stability of hybrid SCIEO/CdS micelles depends on the ratio of PEO-to-SCI lengths: it was found that the SCIEO-2 copolymer with sufficiently long PEO block behaves as an effective stabilizer for the synthesis of CdS nanoparticles embedded in micelles, while SCIEO-1 does not. The morphology of aggregates varies with the Cd-to-SCI ratios and ranges from spherical to mixture of spherical and necklace-like micellar aggregates. A number of experimental techniques including static and dynamic light scattering, fluorescence correlation spectroscopy, atomic force and transmission electron microscopy, UV-vis, and fluorescence spectroscopy were employed for the characterization of both CdS containing hybrid micelles and embedded CdS nanoparticles.     

Effect of incorporated CdS nanoparticles on the crystallinity and morphology of poly(styrene‐b‐ethylene oxide) diblock copolymers

Surface‐modified CdS nanoparticles selectively dispersed in hexagonally packed poly(ethylene oxide) (PEO) cylinders of poly(styrene‐b‐ethylene oxide) (PSEO) block copolymers were prepared. The photoluminescence and ultraviolet–visible characteristics of the presynthesized CdS nanoparticles in N,N‐dimethylformamide and in PEO domains of the PSEO block copolymers were determined. Because of strong interactions between the CdS nanoparticles and PEO chains, as shown by Fourier transform infrared spectroscopy, the incorporation of the CdS nanoparticles prevented the PEO cylinders from properly crystallizing; this was confirmed by differential scanning calorimetry and wide‐angle X‐ray diffraction measurements. The intercylinder distance between the swollen and reduced‐crystallinity CdS/PEO cylinders in turn increased, as confirmed by small‐angle X‐ray scattering and transmission electron microscopy. At a high CdS concentration (43 wt % or 8.3 vol % with respect to PEO), however, the hexagonally packed cylindrical nanostructure of the PSEO diblock copolymers was destroyed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1220–1229, 2005     

Preparation and characterization of polyaniline microwires containing CdS nanoparticles

Polyaniline(PANI) microwires containing CdS nanoparticles have been prepared by introducing hydrogen bonding and/or electrostatic interaction between mercaptocarboxylic acid capped CdS nanoparticles and PANI. SEM and TEM proved them to be wire-like structures. PL spectra of the PANI/CdS complex is blue-shifted by 14 nm compared to CdS nanoparticles in N-methylpyrrolidinone(NMP).     

Novel one-step route for synthesizing CdS/polystyrene nanocomposite hollow spheres

CdS/polystyrene nanocomposite hollow spheres with diameters between 240 and 500 nm were synthesized under ambient conditions by a novel microemulsion method in which the polymerization of styrene and the formation of CdS nanoparticles were initiated by gamma-irradiation. The product was characterized by transmission electron microscopy (TEM), field-emission scanning electron microscopy (FESEM), X-ray powder diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and thermogravimetric analysis (TGA), which show the walls of the hollow spheres are porous and composed of polystyrene containing homogeneously dispersed CdS nanoparticles. The quantum-confined effect of the CdS/polystyrene nanocomposite hollow spheres is confirmed by the ultraviolet-visible (UV-vis) and photoluminescent (PL) spectra. We propose that the walls of these nanocomposite hollow spheres originate from the simultaneous synthesis of polystyrene and CdS nanoparticles at the interface of microemulsion droplets. This novel method is expected to produce various inorganic/polymer nanocomposite hollow spheres with potential applications in the fields of materials science and biotechnology.     

The influence of water–organic solvent composition on the morphology and luminescent properties of CdS nanoparticles obtained by chemical precipitation

Cadmium sulfide (CdS) nanoparticles have been obtained by chemical precipitation onto the surface of single-crystalline silicon from an aqueous solution of ammonia, cadmium chloride (CdCl₂), and thiourea, as well as from water–DMSO and water–DMF mixtures with the same concentrations of the reagents. According to data of atomic force microscopy, the samples obtained from the aqueous solution consist of individual nanoparticles and agglomerates thereof with sizes of no larger than 1 µm. Materials obtained from the water–organic mixtures are distinguished by the aggregation of CdS nanoparticles into threadlike chains. The length of the formed curved chains and the size of CdS nanoparticles composing them depend on the nature and amount of an organic component of a mixture. Atomic force microscopy, transmission electron microscopy, and photoluminescence spectroscopy data have shown that the average size of CdS nanoparticles is 2–2.5 nm depending on solvent composition.     

Synthesis of a hybrid material from CdS nanoparticles and carbon nanotubes

A method for synthesis of a hybrid material from CdS nanoparticles and carbon nanotubes (CNT) by the precipitation of CdS nanoparticles on the CNT surface from an aqueous solution containing the Cd^II salt, thiourea, and ammonia was developed. The dependences of the size of particles formed on the CNT on the temperature of the solution and the duration of precipitation were observed. The degree of imperfection of the CNT surface exerts a substantial effect on the density of the precipitated CdS particles.     

Photocontrolled magnetization of CdS-modified Prussian blue nanoparticles

The first photocontrollable magnetic nanoparticles containing CdS and Prussian blue (PB) have been created using reverse micelles as nanoreactors. Photoinduced electron transfer from CdS to PB in the reverse micelle changed the magnetic properties of the composite nanoparticles from ferromagnetic to paramagnetic. The magnetization in the ferromagnetic region below 4 K was substantially decreased after UV light illumination and could be restored almost to its original level by thermal treatment at room temperature. This novel strategy of designing composite nanoparticles containing photoconductive semiconductors and magnetic materials to create photoswitchable magnetic materials may open many possibilities in the development of magneto-optical devices.     

Synthesis and characterization of CdS nanoparticles prepared by precipitation in the presence of span 20 as surfactant

Cadmium sulfide nanoparticles with average size of ≈16 nm have been synthesized using chemical precipitation reaction of CdCl₂ and Na₂S in the presence of nonionic surfactant stabilized reverse emulsions. Sorbian monolaurate (Span 20) is used for the stabilization of emulsions. The influence of Span 20 on controlling the size and properties of CdS nanoparticles were studied. The obtained CdS nanoparticles were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Energy-dispersive x-ray (EDX), and X-ray diffraction (XRD). The optical properties of CdS nanoparticles are investigated systematically by UV-visible absorption spectroscopy. The blue shift in the absorption region and increase in the bandgap to the larger value (2.77 eV) are attributed to the nanosize of the obtained particles.     

DNA/CdS纳米粒子复合体系的光谱和光电化学性质

在水溶液中以DNA作为模板和稳定剂, 构筑了DNA与CdS纳米粒子复合体系(DNA/CdS NPC), 研究DNA的含量, 单双链等对复合体系光电响应的影响, 并综合TEM, UV-Vis, IR和荧光光谱等对其形貌和光谱性质进行表征. 结果表明, CdS纳米粒子(CdS NPs)与DNA链之间主要通过静电作用结合; DNA模板对CdS NPs的禁带宽度没有影响; 以DNA模板合成的CdS NPs具有较高的表面态密度, 其对CdS NPs的荧光有增强作用, 而对光电流响应有抑制作用, 并且DNA在复合体系中的含量影响荧光增强和光电流减弱的程度. 该复合体系在荧光标记检测和DNA的定量分析方面可能具有应用前景.     

水溶性的CdSe/CdS/ZnS量子点的合成及表征

用L-半胱氨酸盐(Cys)作为稳定剂,合成了水溶性的双壳结构的CdSe/CdS/ZnS半导体量子点。吸收光谱和荧光光谱结果表明,双壳结构的CdSe/CdS/ZnS纳米微粒比单一的CdSe核纳米粒子和单核壳结构的CdSe/CdS纳米粒子具有更优异的发光特性。用透射电子显微镜(TEM)、ED、XRD、XPS和FTIR等方法对CdSe核和双壳层的CdSe/CdS/ZnS纳米微粒的结构、分散性及形貌分别进行了表征。     

Biomolecule-quantum dot systems for bioconjugation applications

In the present work, it is reported for the first time the bioconjugation of CdS quantum dots (QDs) directly with bovine serum albumin (BSA) using a one-step procedure via aqueous route at room temperature by methods of colloidal chemistry. Essentially, the bioconjugates were developed based on BSA as capping ligand for the nucleation and stabilization of CdS nanoparticles using cadmium perchlorate and thioacetamide as precursors. UV-visible spectroscopy was used to characterize the kinetics and the relative stability of CdS nanoparticles. The CdS nanocrystals were produced with the calculated average particle size below 4.0 nm, indicating they were in the so-called "quantum-size confinement range". The results have clearly indicated that BSA was effective on nucleating and stabilizing the colloidal CdS quantum dots.     

The Effects of Methylene Blue on the Optical Properties of Nanometer-sized CdS Organosol

The inverse micelle system of nanometer-sized CdS doped with Methylene Blue(MB) was synthesized and characterized by using absorption and fluorescence spectra. The results show that MB molecules were absorbed onto the surface of CdS nanoparticles and interacted with surfactants when its concentration was lower than 4×10^-6 mol/L. From the comparison of their spectra, MB molecules by adsorption have a strong quenched fluorescence emission of CdS nanoparticles with surface defect states. All responses and main mechanism are ascribed to the charge transfer between the CdS organosol and Methylene Blue molecules.     

Size-dependent carrier dynamics in CdS nanoparticles by femtosecond visible-pump/IR-probe measurements

Ultrafast photoexcited carrier dynamics in CdS nanoparticles prepared by an AOT/n-heptane reversed micelle system were investigated by a femtosecond visible-pump/mid-IR probe technique. A mid-IR probe beam was found to mainly probe the ultrafast dynamics of photoexcited electrons in the conduction band. Dispersions of CdS nanoparticles with 8 different mean diameters from 2.9 to 4.1 nm were prepared by tuning the mole ratio between water and AOT (W = [H(2)O]/[AOT]) in the reversed micelle systems. The excited state lifetime strongly depended on the mean size of CdS nanoparticles with a maximum around a mean diameter of 3.5 nm. This result was explained by considering the balance between the carrier recombination rates via surface states and those via interior states. The relationship between the excited state lifetime and the size of CdS nanoparticles was drastically changed when the surface was terminated by thiol molecules.     

Simple and low temperature preparation and characterization of CdS nanoparticles as a highly efficient photocatalyst in presence of a low-cost ionic liquid

A simple and low temperature method is proposed for preparation of CdS nanoparticles in presence of 1-ethyl-3-methylimidazolium ethyl sulfate, [EMIM] [EtSO₄], a room-temperature ionic liquid (RTIL). The powder X-ray diffraction (XRD) studies display that the products are excellently crystallized in the form of cubic structure and size of the nanparticles prepared in presence of the RTIL is smaller than that prepared in water. Energy dispersive X-ray spectroscopy (EDX) investigations reveal that the products are very pure and nearly stoichiometric. The results obtained by scanning electron microscopy (SEM) demonstrate that the CdS nanoparticles prepared in presence of the RTIL have lower tendency for aggregation relative to the prepared sample in water. Diffuse reflectance spectra (DRS) of the product prepared in the neat RTIL, shows 1.52 eV blue shift relative to bulk CdS, which can be attributed to quantum confinement effect of the CdS nanoparticles. A possible formation mechanism for CdS nanoparticles in presence of the RTIL is presented. Photocatalytic activity of the CdS nanoparticles towards photodegradation of methylene blue (MB) using UV and visible lights was performed. The results demonstrate that observed firstorder rate constant for photodegradation of MB on CdS nanoparticles prepared in the neat RTIL are about 20 and 6 times greater than the prepared sample in water using visible and UV lights, respectively.     

Composites comprising CdS nanoparticles and poly(ethylene oxide): optical properties and influence of the nanofiller content on the thermal behaviour of the host matrix

Tri-n-octylphosphine oxide-capped CdS nanoparticles were synthesized with the cadmium(II) complex of thiocarbohydrazide as a precursor. Nanocomposites were prepared by mixing a toluene solution of poly(ethylene oxide) (PEO) and the obtained CdS nanoparticles. The ultraviolet-visible spectroscopy measurements showed a blue shift of the onset of optical absorption, compared to bulk CdS, which confirmed the presence of nanostructured CdS. A transmission electron microscopy micrograph of the nanocomposite depicted that the nanoparticles are well dispersed in the PEO matrix. Differential scanning calorimetry analysis revealed hindered crystallization of PEO in the presence of CdS nanoparticles. It was also found that increasing the nanoparticle content led to the shift of the onset of decomposition of the matrix towards higher temperature.     

Construction of CdS Nanoparticle Chain on DNA Template

Salmon sperm DNA was used as template to assembly and nucleate CdS nanoparticles.Transmission electron microscopy(TEM)images showed that the CdS nanoparticles fromed unique nanostructure which present regular and parallel chains along DNA molecular chaing.The width of every chain was about 3 nm.Raman and Xray photoelectron energy spectroscopy(XPS) confirmed that the nucleation sites of CdS nanoparticles were phosphate acid groups of DNA.     

An X-ray spectroscopy study of CdS nanoparticles formed by the Langmuir–Blodgett technique on the surface of carbon nanotube arrays

The composition and electronic structure of cadmium sulfide (CdS) nanoparticles formed by the Langmuir–Blodgett (LB) technique on clean silicon wafers and the surface of vertically aligned carbon nanotube (CNT) arrays are studied by X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS) spectroscopy. The samples were annealed in a vacuum at 175 °C and 225 °C to remove the organic matrix of the LB film. From the analysis of the XPS data the increased concentration of sulfate groups on the surface of CdS nanoparticles formed on CNTs and the electron density transfer from CdS to CNTs are determined. An increase in the LB film annealing temperature causes an increase in the degree of crystallinity and the CdS crystallite size and a decrease in the photoluminescence intensity of a CdS–CNT hybrid.     

Preparation of cadmium sulfide nanoparticles in self-reproducing reversed micelles

Octyl octanoate (O-OL) underwent hydrolysis in sodium octanoate (NaOA) reversed micelles in 85:15 = isooctane:octanol (OL) (v/v), containing w = [H2O]/[NaOA] = 40. The products of the hydrolysis, octanoic acid (OA) and octanol (OL), lead to the formation of additional (albeit smaller) reversed micelles; hence the process is considered to be self-reproducing. Self-reproduction was found to be catalyzed by lithium hydroxide, solubilized in the water pools, as well as by hydrogen sulfide, added to the solution of the reversed micelles. Addition of hydrogen sulfide to cadmium perchlorate containing self-reproducing reversed micelles resulted in the formation of cadmium sulfide (CdS) nanoparticles. Diameters of the CdS containing nanoparticles could be altered from 5.4 to 1.8 nm by changing the [Cd2+]/[H2S] ratios from 0.25 to 10. The CdS nanoparticles formed were capped by mercaptopropionic acid, isolated as solids, and could be repeatedly redispersed in water without changing their sizes. Additional CdS nanoparticles were generated in the supernatants removed from the precipitated capped CdS nanoparticles.     

Synthesis and characterization of ternary nanocomposites of TiO2/rGO/CdS as an efficient catalyst for photo-degradation of methyl orange

Novel ternary composite photocatalysts have been successfully prepared by TiO₂ nanofibers, reduced graphene oxide, and CdS nanoparticles (TiO₂/rGO/CdS) by using electrospinning technique with easy chemical methods. The structures and their properties are examined by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), and field-emission scanning electron microscope (FESEM). The structural characterization of the composite reveals that pure TiO₂ NFs and CdS NPs crystalline very well and the reduced graphene oxide is tightly composed with TiO₂ NFs and CdS Nps. The photodegradation of methyl orange (MO) under UV light illumination is significantly enhanced compared with that of bare materials. This ternary composite degrades methyl orange within 75 min. The enhanced photocatalytic degradation performance resulted from effective separation of e–h pairs with rGO sheets and also contributed for high rate degradation efficiency. This novel ternary composite has a potential application of wastewater purification and utilization for energy conversions.