Synthesis and properties of nonylphenol-substituted dodecyl sulfonate

Nonylphenol-substituted dodecyl sulfonate (C₁₂-NPAS) was synthesized via sulfonation-alkylation-neutralization using 1-dodecene, SO₃, and nonylphenol as raw materials. The properties such as surface tension, interfacial tension (IFT), wettability, foam properties, and salinity tolerance of C₁₂-NPAS were systematically investigated. The results show that the critical micelle concentration (CMC) of C₁₂-NPAS was 0.22?mmol?·?L^?1 and the surface tension at the CMC (γ_CMC) of C₁₂-NPAS was 29.4 mN/m. When compared with the traditional surfactants sodium dodecyl benzene sulfonate (SDBS), sodium dodecyl sulfate (SDS), and linear alkylbenzene sulfonate (LAS), the surface properties of C₁₂-NPAS were found to be superior. The IFT between Daqing crude oil and a weak-base alkaline/surfactant/polymer (ASP) oil flooding system containing 0.1?wt% of C₁₂-NPAS can reach an ultralow level of 2.79?×?10^?3 mN/m, which was lower than that found for the traditional surfactant heavy alkylbenzene sulfonate (HABS). The salinity and hardness tolerance of C₁₂-NPAS were much stronger than those found for conventional surfactants, petroleum sulfonate, and LAS. C₁₂-NPAS also shows improved wetting performance, foamability, and foam stability.     

Polymers as Hydrophobic Adsorbent Surface for Some Surfactants

Polyvinyl alcohol (PVA) and polyacrilic acid (PAA) were used as hydrophobic adsorbent surfaces at 25°C for two nonionic surfactants, namely, tetradecyl polyoxyethylenated monolaurate [La(EO)₁₄] and tetradecyl polyoxyethylenated monooleate [Ol(EO)₁₄], and two anionic surfactants, namely, sodium oleic sulfonate [OlSO₃Na] and sodium dodecyl benzene sulfonate [SDBS]. Surface tension measurements were performed to determine the critical micelle concentration (CMC) and the adsorption isotherms of the tested surfactants. All the tested surfactants display L-shape isotherms except that of OlSO₃Na onto PVA. No adsorption behavior has been shown for the anionic SDBS onto both PVA and PAA. The adsorption data show higher adsorption affinity for all the tested nonionic surfactants onto PAA than onto PVA while the investigated anionic surfactant OlSO₃Na possesses close values of Γ_max. The study reveals that the nature of the polymer surface as adsorbent besides the molecular structure of the surfactant defined the types and mechanisms of adsorption.     

Inhibition effect of {surfactant–substrate} aggregation on the rate of oxidation of reducing sugars by alkaline hexacyanoferrate(III)

The effect of cationic (cetyltrimethylammonium bromide, CTAB), anionic (sodium lauryl sulfate, NaLS), and nonionic (Brij‐35) surfactants on the rate of oxidation of some reducing sugars (xylose, glucose, and fructose) by alkaline hexacyanoferrate(III) has been studied in the temperature range from 35 to 50°C. The rate of oxidation is strongly inhibited in the presence of surfactant. The inhibition effect of surfactant on the rate of reaction has been observed below critical micelle concentration (CMC) of CTAB. In case of NaLS and Brij‐35, the inhibition effect was above CMC, at which the surfactant abruptly associates to form micelle. The kinetic data have been accounted for by the combination of surfactant molecule(s) with a substrate molecule in case of CTAB and distribution of substrate into micellar and aqueous pseudophase in case of NaLS and Brij‐35. The binding parameters (binding constants, partition coefficients, and free‐energy transfer from water to micelle) in case of NaLS and Brij‐35 have been evaluated with the help of Menger and Portnoy model reported for micellar inhibition. © 2007 Wiley Periodicals, Inc. Int J Chem Kinet 39: 595–604, 2007     

Interactions between anionic mixed micelles and α-cyclodextrin and their inclusion complexes: conductivity, NMR and fluorescence study

Mixed micelle formation of anionic surfactants sodium dodecyl sulfate (SDS) and sodium lauroyl sarcosine (SLAS) have been studied in water and in 5, 10, and 15 mM concentrations of α-cyclodextrin (α-CD) over mole fraction range of α _SDS from 0 to 1. From the conductivity curves, the critical micellar concentration (CMC) for the pure and binary mixtures were evaluated. The degree of counterion association (χ) or counterion dissociation (δ), the equivalent ionic conductivities of the monomeric species (Λ _m), the associated species (Λ _assc), and the micelle (Λ _mic) were evaluated from the slope of the conductivity vs concentration plots. The CMC values have been used to calculate the thermodynamic parameters such as the standard free energy of micelle formation and a transfer of standard free energy of micelle from the aqueous medium to additive medium computed. The apparent CMC of the surfactants varies linearly with α-CD concentrations. From the dependence of CMC of the surfactants on α-CD concentration, we are able to determine the association constant (K) of surfactant-α-CD inclusion complexes assuming 1:1 stoichiometry. Mixed micelle behaves ideally in the pure water as well as at the different concentrations of α-CD, which was evaluated by using the Clint equation, the regular solution approximation, and Motomura’s formulation. Self-diffusion coefficients of the micelle increased upon the induction of SDS into the micelle. 2D-rotating frame Overhauser effect spectroscopy spectra of SDS and SLAS were recorded in the presence of α-CD to investigate the interaction between H-atoms of the alkyl chain of the surfactants and H-atoms of the hydrophobic cavity of α-CD indicating multiple complexation. The fluorescence anisotropy of rhodamine B has been measured to observe the structural behavior of mixed micelle.     

Surface and volume properties of dodecylethyldimethylammonium bromide and benzyldimethyldodecylammonium bromide: II. Volumetric properties of dodecylethyldimethylammonium bromide and benzyldimethyldodecylammonium bromide

Density measurements were carried out for aqueous solutions of two cationic surfactants: dodecylethyldimethylammonium bromide (C₁₂(EDMAB)) and benzyldimethyldodecylammonium bromide (BDDAB). On the basis of the obtained results of the measurements the CMC and partial molar volumes of the surfactants studied were also determined. The obtained CMC values were also analyzed with those accounted on the basis of the surface tension data from the previous paper [J. Harkot, B. Jańczuk, J. Colloid Interface Sci. (2008), submitted for publication]. The values of CMC determined from the surface tension and density measurements for C₁₂(EDMAB) are equal to 9.9×10⁻³ and 1.5×10⁻² M and for BDDAB to 5.25×10⁻³ and 5.3×10⁻³ M, respectively. These obtained values are very similar. However, in the literature it is difficult to find the CMC values for C₁₂(EDMAB) and BDDAB determined by these two methods used by us—especially from the density measurements for BDDAB and surface tension measurements for C₁₂(EDMAB). In the case of the apparent molar volumes of C₁₂(EDMAB) there is a good agreement between the values obtained by us and those found in the literature. The CMC values for C₁₂(EDMAB) and BDDAB were also determined on the basis of their surface tension and free energy of electrostatic interactions between the polar heads of these surfactants and compared with those obtained from the surface tension and density measurements. It was found that the theoretically obtained CMC values were close to those determined from the density and surface tension data for the C₁₂(EDMAB) and that the ratios of the CMC values of the surfactants to their concentration at which the water surface tension decreased by about 20 mN/m proved that the presence of the aryl group in the BDDAB head instead of the methyl group caused that its micellization process was more inhibited in relation to its adsorption at air–water interface than that of C₁₂(EDMAB).     

Interaction of Nonionic Surfactant Triton-X-100 with Ionic Surfactants

The interaction in two mixtures of a nonionic surfactant Triton-X-100 (TX-100) and different ionic surfactants was investigated. The two mixtures were TX-100/sodium dodecyl sulfate (SDS) and TX-100/cetyltrimethylammonium bromide (CTAB) at molar fraction of TX-100, α_TX-100 = 0.6. The surface properties of the surfactants, critical micelle concentration (CMC), effectiveness of surface tension reduction (γ_CMC), maximum surface excess concentration (Γ_max), and minimum area per molecule at the air/solution interface (A _min) were determined for both individual surfactants and their mixtures. The significant deviations from ideal behavior (attractive interactions) of the nonionic/ionic surfactant mixtures were also determined. Mixtures of both TX-100/SDS and TX-100/CTAB exhibited synergism in surface tension reduction efficiency and mixed micelle formation, but neither exhibited synergism in surface tension reduction effectiveness.     

Binary mixed micelles of chiral sodium undecenyl leucinate and achiral sodium undecenyl sulfate: I. Characterization and application as pseudostationary phases in micellar electrokinetic chromatography

Sodium 10-undecenyl sulfate (SUS), sodium 10-undecenyl leucinate (SUL) and their five different mixed micelles at varied percent mole ratios were prepared. The critical micelle concentration (CMC), C₂₀, γ_CMC, partial specific volume, methylene group selectivity, mobilities and elution window were determined using a variety of analytical techniques. These surfactant systems were then evaluated as novel pseudostationary phases in micellar electrokinetic chromatography (MEKC). As a commonly used pseudostationary phase in MEKC, sodium dodecyl sulfate (SDS) was also evaluated. The CMC values of SUS and SUL were found to be 26 and 16 mM, respectively, whereas the CMC of mixed surfactants was found to be very similar to that of SUL. The C₂₀ values decreased dramatically as the concentration of SUL is increased in the mixed micelle. An increase in SUL content gradually increased the methylene group selectivity making the binary mixed surfactants more hydrophobic. Linear solvation energy relationships (LSERs) and free energy of transfer studies were also applied to predict the selectivity differences between the surfactant systems. The cohesiveness and the hydrogen bond acidic character of the surfactant systems were found to have the most significant influence on selectivity and MEKC retention. The SUS and SDS showed the strongest while SUL showed the weakest hydrogen bond donating capacity. The basicity, interaction with n and π-electrons of the solute and dipolarity/polarizability were the least significant factors in LSER model for the surfactant systems studied. Free energies of transfer of selected functional groups in each surfactant systems were also calculated and found to be in good agreement with the LSER data.     

锌卟啉轴向配合物的光谱特性及配位二聚体分子内的能量传递

通过轴向配位作用构造了ZnTPP-H₂(m-py)TPP卟啉二元体系,研究了配位二聚体的可见吸收光谱和荧光发射光谱特性,考察了二聚体分子内的能量传递过程,观察到能量从激发态ZnTPP^*流向H₂(m-py)TPP。作为对比,研究了ZnTPP-py体系的可见吸收光谱和荧光发射光谱。轴向配位的吡啶引起了ZnTPP荧光光谱明显红移,没有分子内的能量转移过程发生。用吸收光谱和荧光光谱方法计算了加合反应的平衡常数,得到了基本一致的结果。     

Anionic–Nonionic Mixed Surfactant Systems: Micellar Interaction and Thermodynamic Behavior

The interactions between an anionic surfactant, viz., sodium dodecylbenzenesulfonate and nonionic surfactants with different secondary ethoxylated chain length, viz., Tergitol 15-S-12, Tergitol 15-S-9, and Tergitol 15-S-7 have been studied in the present article. An attempt has also been made to investigate the effect of ethoxylated chain length on the micellar and the thermodynamic properties of the mixed surfactant systems. The micellar properties like critical micelle concentration (CMC), micellar composition (X_A), interaction parameter (β), and the activity coefficients (f_A and f_NI) have been evaluated using Rubingh's regular solution theory. In addition to micellar studies, thermodynamic parameters like the surface pressure (Π_CMC), surface excess values (Γ_CMC), average area of the monomers at the air–water interface (A_avg), free energy of micellization (ΔG_m), minimum energy at the air–water interface (G_min), etc., have also been calculated. It has been found that in mixtures of anionic and nonionic secondary ethoxylated surfactants, a surfactant containing a smaller ethoxylated chain is favored thermodynamically. Additionally, the adsorption of nonionic species on air/water interface and micelle increases with decreasing secondary ethoxylated chain length. Dynamic light scattering and viscometric studies have also been performed to study the interactions between anionic and nonionic surfactants used.     

Mixed micellization and surface properties of non-ionic/cationic surfactants

We investigate the surface properties of aqueous binary mixtures of our cationic surfactant O-dodecyl-N,N′-diisopropylisourea hydrochloride (ISO-DIC C₁₂) with commercially available nonionic surfactant polyoxyethylene p-(1,1,3,3-tetramethylbutyl)phenyl ether (TritonX-100) at different temperatures (288 to 303?K). The micellization behavior of the binary systems is studied by determining the surface tension and other important physicochemical parameters, such as the critical micelle concentration (CMC), surface tension at the CMC(γ_cmc), Krafft Temperature (T_K), maximum excess concentration (Γ_max), minimum surface area per molecule (A_min), surface pressure at the CMC (П_cmc), and the adsorption efficiency (pC20) at the air/water interface. The study has additionally covered the calculation of thermodynamic parameters of micellization, including the standard Gibbs free energy, the standard enthalpy, the standard entropy, the free energy, and the Gibbs free energy of adsorption at air/water interface. The CMC values of the binary systems determined by experimental data are used to evaluate the micellar composition in the mixed micelle, the interaction parameter β and the activity coefficients f₁(ISO-DIC C₁₂) and f₂ (polyoxyethylene p-(1,1,3,3-tetramethylbutyl)phenyl ether) using the theoretical treatment proposed by Clint and Rubingh. Our results reveal that the proposed binary systems possess enhanced surface activity compared to those of the individual surfactants.     

Mechanism of electroless deposition of Ni–W–P alloys by adding surfactants

This paper describes an electroless deposition method for the formation of a thin metallic film containing mainly nickel with significant amounts of tungsten (up to 25%) and phosphorus (5–10%). The film was deposited from an aqueous electrolyte that contained sodium tungstate as a source of tungsten, nickel sulphate as a source of nickel and hypophosphite as the reducing agent and a source of phosphorus. The surfactants were p‐hexyloxy‐p‐sodium sulphonate azobenzene (HSA) with the formula H₁₃C₆OC₆H₄N₂ C₆H₄SO₃Na and p‐hexylbenzyltriethanol ammonium chloride (HBC) with the formula H₁₃C₆H₄CH₂N⁺ (C₂H₄OH)₃Cl^?, added as stabilizers. In this study the process parameters of typical solutions, such as temperature, pH and concentration of tungstate salt and the concentration of different surfactants, were presented and discussed. Adsorption of the surfactants on a metal surface was dependent, among other things, on the structure of their hydrophobic and hydrophilic portions. The effect of adsorption of these surfactants on a metal surface was examined above and below the critical micelle concentration (CMC). The deposition process involves several reactions that occur simultaneously and are described in detail in this work. The mechanism for interaction of the surfactants with the steel surface was proposed through the isotherm for adsorption from aqueous solution. Furthermore, the surface properties of the surfactants were measured, particularly the CMC, the surface tension reduction and the maximum surface excess Γ_max. The tungsten percentage in the deposit layer was strongly influenced by the plating conditions and the critical concentration of each surfactant. The results were discussed according to the surface properties of the additive. The thin film of Ni–W–P achieved high crystal refinement and high hardness, it was smooth and uniform and it exhibited superior corrosion resistance. Copyright © 2003 John Wiley & Sons, Ltd.     

Effect of Ionic Surfactants on the Adsorption of Quercus infectoria Natural Dye on Cotton Fiber: A Kinetic Study

The adsorption kinetics of Quercus infectoria natural dye on cotton in the absence and presence of the cationic (cetyl trimethyl ammonium bromide; CTAB) and anionic (sodium lauryl sulfate; NaLS) surfactants has been investigated at three temperatures, namely, 40°C, 50°C, and 60°C. On increasing the surfactant content in the surfactant-dye mixture, the initial rate of adsorption (h _i) and the adsorption capacity at equilibrium (q _e) were found to increase while pseudo-second-order rate constant (k ₂) was found to decrease. The retarding effect of surfactant on k ₂ was in order of CTAB > NaLS. The activation parameters for adsorption process have been evaluated in each case, and the mechanism of adsorption process has been discussed.     

Micellar parameters of diblock copolymers and their interactions with ionic surfactants

The interactions of non-ionic amphiphilic diblock copolymer poly（oxyethylene/oxybutylene）(E₃₉B₁₈) with anionic surfactant sodium dodecyl sulphate（SDS） and cationic surfactant hexadecyltrimethylammonium bromide（CTAB） were studied by using various techniques such as surface tension,conductivity,steady-state fluorescence and dynamic light scattering.Surface tension measurements were used to determine the critical micelle concentration（CMC） and thereby the free energy of micellization(△G_mic),free energy of adsorption(△G_ads),surface excess concentration（Γ） and minimum area per molecule（A）.Conductivity measurements were used to determine the critical micelle concentration（CMC）,critical aggregation concentration（CAC）,polymer saturation point（PSP）,degree of ionization（α） and counter ion binding（β）. Dynamic light scattering experiments were performed to check the changes in physiochemical properties of the block copolymer micelles taken place due to the interactions of diblock copolymers with ionic surfactants.The ratio of the first and third vibronic peaks（I₁/I₃） indicated the polarity of the pyrene micro environment and was used for the detection of micelle as well as polymer-surfactant interactions.Aggregation number（N）,number of binding sites（n） and free energy of binding （△G_b） for pure surfactants as well as for polymer-surfactant mixed micellar systems were determined by the fluorescence quenching method.     

Effect of Oxyethylete Units on Adsorption and Micellization Properties of Novel Benzene Sulfonate Surfactants

The surface tension and fluorescence spectra of sodium octyl-[ω-octyloxy-poly(oxyethylene)]-yl-benzene sulfonates (APE_nBS) aqueous solutions have been investigated by Wilhelmy plate method and intrinsic probe methods, respectively to study the effect of EO units on their properties. It was discovered that the surface performance of these surfactants was greatly outstanding: the values of critical micelle concentration (CMC) reached to be of the order of magnitude of 10^?5 mol/L, the values of surface tension at CMC, γ_CMC, were between 25.79 to 31.02 mN/m, and the effectiveness and efficiency of surface tension reduction were excellent. The introduction of oxyethylene units to the surfactant molecule evidently improved the solubility of APE_nBS. With the increase in EO units, the CMC slightly changed after the first decreased. On the other hand, the surface excess concentration at saturation, Γ _max, decreased after the first increased and γ_CMC increased after the first decreased accordingly. The CMC determined by fluorescence spectra of intrinsic probe method were accorded with the CMC measured by surface tension method. The aggregation number N, characterized by quenching the fluorescence spectra with methyl viologen (MV²⁺) as the extrinsic quencher, gradually decreased first (from 0 to1) and then slightly changed (from 1 to 4) with increasing EO chain length. So we concluded that the appropriate number of EO units was the key factor to get the best physicochemical properties of APE_nBS.     

Hydrophobic layered double hydroxides (LDHs): Selective adsorbents for liquid mixtures

 The external and internal surface area of the calcium aluminum double hydroxide [Ca₂Al(OH)₆] NO₃ ⋅ 2H₂O were hydrophobized by the anionic surfactants sodium dodecylsulfate and sodium dodecyl-benzene sulfonate. The adsorption behavior towards liquid mixtures (benzene/n-heptane and n-propanol/ toluene) was studied by determining the surface excess adsorption isotherms, the heats of immersion in these liquids, and the basal spacing, i.e. the expansion of the interlayer space. Both hydrophobic layered double hydroxides (LDHs) adsorbed n-hep-tane, benzene, toluene, and n-pro-panol between the layers with considerable increase of the basal spacing. Interlamellar swelling of the hydrophobizised LDHs in n-heptane was fundamentally different to the behavior of hydrophobized 2 : 1 clay minerals (smectites, vermiculites). The surface excess isotherms for benzene/ heptane mixtures were U-shaped and indicate preferential adsorption of benzene. Dodecylbenzene sulfonate double hydroxide preferentially adsorbed propanol from n-propanol/ toluene mixtures but the dodecyl-sulfate derivative adsorbed both compounds. Received: 23 January 1997 Accepted: 10 February 1997     

Effect of Organic Counterions on the Properties of N-Lauryl Diisopropanolamine Surfactants

The influence of counterions on the surface properties of N-lauryl diisopropanolamine surfactants is delineated using conductometry and surface tension measurements. Twelve types of organic counterions have been studied: C₁–C₁₂ monocarboxylic acids anions. The surface properties of the synthesized surfactants, including surface tension, critical micelle concentration (CMC), effectiveness (π_CMC), efficiency (pC₂₀), maximum surface excess (Γ_max), minimum surface area (A_min), Gibbs energy of micellization (ΔG_mic), and adsorption (ΔG_ad) processes in the aqueous. The biodegradability of the prepared surfactants was tested in river water using the die-away method. Petroleum-collecting and petroleum-dispersing capacities of the synthesized compounds on the surface of water of varying mineralization degree have been studied.     

Synthesis and Performance of Novel Sulfonate Gemini Surfactant with Trialkyl Chains

A new type of sulfonate gemini surfactant with three lipophilic alkyl chains (3C₁₀-DS) was synthesized, and the structure of the product was confirmed by using the infrared spectrum and mass spectrum. Its critical micelle concentration (CMC) is 0.41 mmol/L, one order of magnitude lower than those of convectional (single-chain) surfactants, and the minimum surface tension is 27.6 mN/m. The interfacial tension (IFT) between the compound system of 3C₁₀-DS and petroleum sulfonate (PS) and the simulated oil reaches ultra-low levels (10^?3 mN/m), and there exists significant synergistic effect between 3C₁₀-DS and PS. The compound flooding system consisting of polymer and the mixture of 3C₁₀-DS and PS can effectively improve oil recovery for high-medium permeability cores and have a good application prospect in enhancing oil recovery.     

Synthesis and properties of triethylalkylammonium perfluorooctanesulfonates (APFOS)

Six ionic surfactants containing a perfluorooctanesulfonic anion and a positively charged ammonium in a molecule, R_FSO₃⁻N⁺Et₃C_nH_2n+1 (n=2, 4, 6, 8, 10 and 12), were prepared from perfluorooctanesulfonyl fluoride, triethylamine and linear alkanol. Solution properties of triethylalkylammonium perfluorooctanesulfonates (APFOS) have been measured in terms of surface tension. The values of critical micelle concentration (cmc) decrease with an increase of N-alkyl chain length, and the logarithm of the cmc decreases linearly with increasing N-alkyl chain length (n≥6), while the negative values of standard free energy for the adsorption become larger as the N-alkyl chain length increases.     

Wettability of a Polymethylmethacrylate Surface by Extended Anionic Surfactants: Effect of Branched Chains

The adsorption behaviors of extended anionic surfactants linear sodium dodecyl(polyoxyisopropene)₄ sulfate (L-C₁₂PO₄S), branched sodium dodecyl(polyoxyisopropene)₄ sulfate (G-C₁₂PO₄S), and branched sodium hexadecyl(polyoxyisopropene)₄ sulfate (G-C₁₆PO₄S) on polymethylmethacrylate (PMMA) surface have been studied. The effect of branched alkyl chain on the wettability of the PMMA surface has been explored. To obtain the adsorption parameters such as the adhesional tension and PMMA-solution interfacial tension, the surface tension and contact angles were measured. The experimental results demonstrate that the special properties of polyoxypropene (PO) groups improve the polar interactions and allow the extended surfactant molecules to gradually adsorb on the PMMA surface by polar heads. Therefore, the hydrophobic chains will point to water and the solid surface is modified to be hydrophobic. Besides, the adsorption amounts of the three extended anionic surfactants at the PMMA–liquid interface are all about 1/3 of those at the air–liquid interface before the critical micelle concentration (CMC). However, these extended surfactants will transform their original adsorption behavior after CMC. The surfactant molecules will interact with the PMMA surface with the hydrophilic heads towards water and are prone to form aggregations at the PMMA–liquid interface. Therefore, the PMMA surface will be more hydrophilic after CMC. In the three surfactants, the branched G-C₁₆PO₄S with two long alkyl chains exhibits the strongest hydrophobic modification capacity. The linear L-C₁₂PO₄S is more likely to densely adsorb at the PMMA–liquid interface than the branched surfactants, thus L-C₁₂PO₄S possesses the strongest hydrophilic modification ability and shows smaller contact angles on PMMA surface at high concentrations.     

Interaction of Polyacrylamide with Conventional Anionic and Gemini Anionic Surfactants

The interaction of polyacrylamide (PAM) with conventional anionic (sodium lauryl sulphate, NaLS) and gemini anionic (sodium salt of bis(1-dodecenyl succinimic acid), represented as NaBDS) surfactants has been studied in alkaline medium by electrical conductance and surface-tension measurements at 35⁰C in order to compare the behavior of two surfactants toward the polymer. The surface parameters and thermodynamic parameters have been evaluated and compared. The results indicate more readily interaction of anionic gemini surfactant with the polymer (PAM).