Influence of the ligand structure on the liquid crystalline properties of lanthanide-containing salicylaldimine mesogens

The synthesis and liquid crystalline properties of lanthanide complexes with different but structurally related Schiff's base ligands are described. The complexes all contain nitrate counterions and have the stoichiometry [Ln(LH)³ (NO³)³], where Ln is a trivalent rare-earth ion (La, Nd, Gd or Ho) and LH is a Schiff's base ligand. None of the Schiff's base ligands exhibits mesomorphism, but some of the complexes do (SmA phase). It is shown that the presence or absence and the position of substituents on the ligand determine whether or not the complexes show mesomorphism. The thermal behaviour of these compounds has been investigated by hot stage polarizing microscopy and differential scanning calorimetry.     

Influence of a terpolymer compatibilizer on the nanostructure of poly(trimethylene terephthalate)/montmorillonite nanocomposites

The use of a compatibilizer to improve the interactions between poly(trimethylene terephthalate) (PTT) and an organically treated montmorillonite (MMT) clay was studied. Nanocomposites, with and without compatibilizer, were obtained using a torque rheometer; their nanostructures were analyzed by wide angle X‐ray diffraction (WAXD), transmission electron microscopy (TEM), steady state and dynamic rheological measurements, and Fourier transform infrared analysis (FT‐IR). Only intercalated structures were obtained when no compatibilizer was added, independent of the mixing method (one or two steps); when the compatibilizer was added, however, intercalated and exfoliated structures were obtained, depending on the masterbatch composition. When the PTT was not present in the masterbatch, two‐phase exfoliated structures were obtained, with a disperse phase composed of nanoclay's lamellas and reticulated compatibilizer and a matrix phase composed of PTT. The compatibilizer cured due to the presence of the nanoclay's surfactant; a mechanism of cure was proposed in which the epoxide rings of the compatibilizer reacted with the hydroxyl groups of the nanoclay's surfactant, forming ether cross‐linkages. It was also concluded that in order to obtain one‐phase exfoliated structures the two steps mixing method using a masterbatch composition of 50 wt% of PTT, 25 wt% of compatibilizer, and 25 wt% of nanoclay gave the best results; after further dilution in the PTT, an exfoliated nanocomposite with a final concentration of 5 wt% of compatibilizer and 5 wt% of nanoclay was obtained. Copyright © 2008 John Wiley & Sons, Ltd.     

Pseudo interpenetrating polymer networks and interpenetrating polymer networks of zeolite 13 X and polystyrene and poly(ethyl acrylate)

Free-radical polymerization of liquid styrene and ethyl acrylate with or without ethylene dimethacrylate crosslinker in the presence of zeolite 13 X produces interpenetrating polymer networks (IPN's) or pseudo IPN's in which polymer chains have grown and filled internal pores of the zeolite. A variety of methods of characterization including, solubility studies, differential scanning calorimetry (DSC), scanning electron microscopy (SEM), ¹³C solid-state nuclear magnetic resonance (NMR) and small-angle X-ray scattering (SAXS) provide supporting evidence for this. The polymer chains within the internal pores do not exhibit a bulk glass transition. This is part of a larger study of the glass transition of polymers confined to cavities or pores of various sizes.     

Mechanical Properties of a Single Electrospun Fiber and Its Structures

Summary: A method to measure the Young's modulus of a single electrospun polyacrylonitrile (PAN) fiber is reported. The Young's modulus can be calculated from the force‐displacement curves obtained by the bending of a single fiber attached to an atomic force microscopy (AFM) cantilever. It is suggested that the high modulus of electrospun fibers is caused by the orientation of molecular chains, which is confirmed by wide‐angle X‐ray diffraction (WAXD) measurements. The communication will provide a basic understanding of the relationship between mechanical properties and structures of electrospun fibers.

A PAN fiber was attached to a contact mode cantilever to facilitate the measurement of force‐displacement curves and Young's modulus.     

Antiferroelectric liquid crystal from a banana-shaped achiral molecule

A new banana-shaped achiral compound, 1,3-phenylene bis[4-(3-fluoro-4-n-octyloxyphenyliminomethyl)benzoate] (PBFOB) was synthesized and its antiferroelectric liquid crystallinity determined. The PBFOB was characterized by differential scanning calorimetry, X-ray diffractometry in the small and wide angle regions, and polarizing optical microscopy; its polarization and antiferroelectric properties were also investigated. The presence of a lateral fluoro-substituent in the banana-shaped achiral molecules containing a Schiff's base mesogen induced a decrease in melting temperature and formation of the switchable smectic B₂ phase in the melt. The spontaneous polarization for PBFOB was about 250 nC cm^-2 and the polarization of this phase switched on the reversal of an applied electric field.     

Design and Development of a Non-Enzymatic Electrochemical Biosensor for the Detection of Glutathione

Glutathione (GSH-reduced form) is a tripeptide that plays a vital role as an antioxidant to remove xenobiotics in the human body and changes in GSH levels are a marker for the progression of various diseases. In this context, a highly sensitive non-enzymatic electrochemical biosensor for the detection of GSH has been developed using reduced graphene oxide Manganese oxide (rGMnO) nanocomposite as the nano-interface. Initially, graphene oxide was synthesized by Hummer's method and then thermally reduced in the presence of MnO₂ in a blast furnace to obtain rGMnO nanocomposite. The nanocomposite was characterized to validate its structure and morphological properties via Scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman, and X-ray photoelectron spectroscopy (XPS). Cyclic voltammetry and amperometry studies showed that upon the addition of GSH, the Pt/rGMnO modified working electrode exhibited a linear response in the range of 1–100 μM at an input voltage of −0.62 V. The developed sensor was found to have a sensitivity of 0.3256 μA μM⁻¹ and LOD of 970 nM with a recovery of 92–104 % in real blood serum samples.     

Use of reactive surfactants in basalt fiber reinforced polypropylene composites

Basalt fibers, similarly to other silicate fibers, can be introduced into both thermoplastic and thermosetting polymer matrices. In this work some basalt fiber reinforced polypropylene composites were investigated. The fiber-matrix adhesion was improved by commercial and non-commercial maleic anhydride derivatives. The latter types, called reactive surfactants, were prepared in laboratory scale and the progress of the syntheses was determined by Raman microscopy. The additives allowed performing reactive interface modification during the compounding process. Due to the interface modification with the additives in low concentration the mechanical properties improved. The boundary layers on the surface of the reinforcing fibers were observed using scanning electron microscopy (SEM).     

Effects of accelerated aging on mechanical,thermal and morphological behavior of polyurethane/epoxy/fiberglass composites

Wind blades, an important application of polymeric composite materials, are subject to natural weathering. This study aims to evaluate mechanical, thermal and morphological behavior during accelerated aging in three thicknesses of epoxy and fiberglass polyurethane-coated composite plates used in wind turbines, in addition to testing with two acoustic emission techniques. An accelerated aging chamber simulated natural weathering mechanisms for 45, 90, 135 and 180 days. This degradation primarily reduced the mechanical properties of the thinner composites, with some damaged specimens exhibiting fiber-matrix debonding. Thermal properties deteriorated. There were no morphological changes on the polyurethane–epoxy interface; however, degradation occurred in the fiber-matrix interface on the surface exposed to radiation. The degree of chalking indicated coating deterioration on the external surface of the polyurethane. The acoustic wave propagation speed and attenuation coefficient measured prior to mechanical testing indicated the presence of damage areas.     

Phthalhydrazide immobilized on MCM‐41 as a potent and recoverable catalyst for the synthesis of pyrrolo[2,1‐a]isoquinolines

We present a study on the synthesis, characterization, and application of phthalhydrazide‐functionalized MCM‐41 (P‐MCM‐41) as a novel and efficient heterogeneous basic catalyst. The described catalyst was fully characterized via various techniques such as scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X‐ray (EDX), X‐ray diffraction (XRD), and Fourier transform infrared (FT‐IR). P‐MCM‐41 efficiently catalyzed the four‐component reaction of arylaldehydes, Meldrum's acid, alkyl isocyanides, and isoquinoline in CHCl₃ to prepare pyrrolo[2,1‐a]isoquinolines in good yields.     

Phase morphology and mechanical properties of iPP/SEP blends

The effects of the addition of diblock copolymer poly(styrene‐b‐ethylene‐co‐propylene) (SEP) to isotactic polypropylene (iPP) on the morphology and mechanical properties were investigated. Phase morphologies of iPP/SEP blends up to a 70/30 weight ratio, prepared in Brabender Plasticoder, were studied with optical microscopy, scanning electron microscopy, transmission electron microscopy, and wide‐angle X‐ray diffraction. The addition of 2.5 wt % SEP caused a nucleation effect (by decreasing the crystallite and spherulite size) and randomization of the crystallites. With further SEP addition, the crystallite and spherulite size increased because of prolonged solidification and crystallization and achieved the maximum in the 80/20 iPP/SEP blend. This maximum was a result of the appearance of β spherulites and the presence of mixed α spherulites in the 80/20 iPP/SEP blend. Dispersed SEP particles were irregular and elongated clusters consisting of oval and spherical core–shell microdomains or SEP micelles. SEP clusters accommodated their shapes to interlamellar and interspherulitic regions, which enabled a well‐developed spherulitization even in the 70/30 iPP/SEP blend. The addition of SEP decreased the yield stress, elongation at yield, and Young's modulus but significantly improved the notched impact strength with respect to the strength of pure iPP at room temperature. Some theoretical models for the determination of Young's modulus of iPP/SEP blends were applied for a comparison with the experimental results. The experimental line was closest to the Takayanagi series model. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 566–580, 2001     

Wettability of dragonfly wings: the structure detection and theoretical modeling

Hydrophobic surfaces have gained extensive attention in recent decades for their potential applications. The hydrophobic properties of dragonfly's (Pantala flavescens) wings were measured, and the water contact angles (WCAs) of the distal and basal part of a dragonfly's wing were 134.9° and 125.8°, respectively. Images obtained by optical microscopy and scanning electron microscopy showed the microstructures and nanostructures on the wing surface. Microstructures appeared as cell block patterns, and the size of the blocks decreased from the basal to distal part. However, no significant differences of chemical composition between the two parts were detected by X‐ray photoelectron spectroscopy. To understand the correlation between the structures and WCA, a double roughness structure model was built theoretically with simplified lattice patterns, and the theoretical model was well fitted with empirical wettability of the dragonfly's wing. Copyright © 2012 John Wiley & Sons, Ltd.     

Surface initiated‐atom transfer radical polymerization of a sugar methacrylate on gold nanoparticles

For development of surface‐functionalized gold nanoparticles (GNPs) as cellular probes, we report herein the synthesis of glycoconjugates of GNPs with cyclic sugar methacrylate, 2‐lactobionamidoethyl methacrylate (LAMA). The strategy involves the attachment of an initiator on the nanoparticle surface followed by surface initiated‐atom transfer radical polymerization (SI‐ATRP) of LAMA. SI‐ATRP of LAMA was achieved by reacting a mixture of copper (I) bromide (CuBr), 2,2′‐bipyridine (bpy) and initiator‐bound GNPs in methanol at 20 °C for 12 h. The resultant GNP glycoconjugates were characterized using Fourier‐transform infrared (FT‐IR) spectroscopy, X‐ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). The FT‐IR spectra of GNP glycoconjugates show IR peaks characteristic of LAMA demonstrating the formation of a LAMA layer on the GNPs' surface. The XPS spectrum of glycoconjugates shows signals due to the presence of carbon (C1s, 288 eV) and oxygen (O1s, 536 eV) along with gold (Au 4f, 100 eV; Au 4p, 743 eV). The increase in diameter of GNPs from 13 to 25 nm measured by SEM further confirms the presence of a LAMA layer on the surface of the GNPs. Considering the biological importance of glycoconjugates, such as cell recognition, cell adhesion and cell growth regulation, the method described herein would be beneficial in many areas such as pathogen detection and biosensors. Copyright © 2008 John Wiley & Sons, Ltd.     

Interpenetrating polymer networks of poly(carbonate-urethane) and polyvinyl pyridine

Simultaneous interpenetrating polymer networks (IPN's), pseudo IPN's, and liner blends of aliphatic poly(carbonate-urethane) (PCU) and polyvinyl pyridine (PVP) have been prepared and characterized by DSC, DMA, and TEM. The full IPN's of PCU and PVP had a single phase morphology only above 50 wt % PCU, as determined by both DSC and DMA and confirmed by transmission electron microscopy (TEM). However, in both pseudo IPN's of PCU and PVP and in their linear blends there exist multiple glass transitions and melting points seen by DSC and DMA indicating phase incompatibility. The full IPN's exhibited superior ultimate mechanical properties and solvent resistance as compared to the pseudo IPN's, liner blends, and the pure crosslinked PCU and PVP networks.     

Modeling heat transfer and transcrystallization kinetics during processing of polymer-based composites materials

Transcrystallization phenomena is a key issue to master for better understanding the role on the fiber-matrix interface in composites materials behavior during and after processing. In this paper, a non-isothermal kinetics model is presented to consider crystallization in fiber-based composite with thermoplastic matrix. The model extends Schneider's formulation to describe the development of transcrystalline layers around fibers. It also mentions the possibility to easily account for shear and flow conditions in addition to the transcrystallinity. Another approach, based on the volume fractions, giving the same results, is also introduced for comparison. Then, a parametric study is proposed in order to demonstrate the relevance of the developed model by comparing its results to well-known expecting behavior from the literature. Finally, an attempt is made to compare this model to the one proposed previously in the literature by Durin and al. after correcting some unclear points in the latter.     

ThX – a next-generation probe for the early detection of amyloid aggregates

Neurodegenerative diseases such as Alzheimer''s and Parkinson''s are associated with protein misfolding and aggregation. Recent studies suggest that the small, rare and heterogeneous oligomeric species, formed early on in the aggregation process, may be a source of cytotoxicity. Thioflavin T (ThT) is currently the gold-standard fluorescent probe for the study of amyloid proteins and aggregation processes. However, the poor photophysical and binding properties of ThT impairs the study of oligomers. To overcome this challenge, we have designed Thioflavin X, (ThX), a next-generation fluorescent probe which displays superior properties; including a 5-fold increase in brightness and 7-fold increase in binding affinity to amyloidogenic proteins. As an extrinsic dye, this can be used to study unique structural amyloid features both in bulk and on a single-aggregate level. Furthermore, ThX can be used as a super-resolution imaging probe in single-molecule localisation microscopy. Finally, the improved optical properties (extinction coefficient, quantum yield and brightness) of ThX can be used to monitor structural differences in oligomeric species, not observed via traditional ThT imaging.

Introducing ThX, a next-generation ThT derivative that allows for the early detection of amyloid aggregates at the bulk and single-aggregate levels.     

Interpenetrating polymer networks of poly(carbonate-urethane) and polymethyl methacrylate

We report the synthesis and characterization of interpentrating polymer networks (IPN's), pseudo INPN's, and blends of urethane-containing aliphatic polycarbonates (PCU) and polymethyl methacrylate (PMMA). The simultaneous full IPN's of PCU's and PMMA over the whole composition range have only one T_g, as determined by DSC and DMA which, together with transmission electron microscopy observations, suggest a single phase morphology even though the linear chain blends are completely immiscible. The full IPN's exhibit a maximum tensile strength at a certain composition, and superior solvent and heat resistance as compared to the pseudo IPN's, linear blends, and the pure crosslinked PCU's and PMMA.     

Microscopy in the studies of polymer biodegradation

The goal of the paper is to overview different possibilities of microscopy, which can be helpful in estimating some of the changes undergoing in the materials exposed to the action of micro-organisms. The types of microscopic techniques and methods discussed in the paper are; optical transmission microscopy (OTM), optical transmission microscopy with polarised light (OPTM), optical reflected microscopy (ORM), optical reflected microscopy with polarised light (OPRM), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The above methods allow to follow the changes of the surface view, the changes inside the polymer and the changes in birefringence (in the case of semi-crystalline polymers). The results can be compared with other techniques used for monitoring of polymer biodegradation or biostability. The examples from author's studies on different types of polyurethanes and the blends of polyethylene with starch are also described in the paper.     

Electrochemistry and Electrochromic Performance of a Metallopolymer Formed by Electropolymerization of a Fe(II) Complex with a Triphenylamine-Hydrazone Ligand

The complex of Fe(II) ions of general formula [Fe L ₂](BF₄)₂ with triphenylamine-hydrazone ligand L has been synthesized and characterized. Oxidative electropolymerization of the complex proceeded smoothly on the working electrode producing a homogenous thin film of metallopolymer. The film thickness and morphology of the layer was investigated by microscopy techniques such as scanning electron microscopy and atomic force microscopy, and the composition of the film was confirmed by X-ray photoelectron spectroscopy analysis. It was found that fifty successive oxidation/reduction cycles resulted in a 120 nm thick film on the electrode surface. The metallopolymer was also characterized using cyclic voltammetry and spectroelectrochemical methods. The film was found to change its color from yellow to green-blue, exhibit high change in transmittance of 60 % at 770 nm, and possess good electrochemical stability during 375 cycles of switching of the potential between −0.1 V and +1.5 V, owing to the presence of metal ions that link two ligand molecules resulting in formation of highly cross-linked film. The switching times (coloration and bleaching) were calculated to be 34.2 s and 7.3 s, respectively. Coloration efficiency of the formed film of polymeric complex was found to be 144 cm² C⁻¹.     

Interpenetrating polymer networks of polycarbonate-urethane and polybutadiene

Interpenetrating polymer networks (IPN's), pseudo IPN's and linear blends of urethane-containing aliphatic polycarbonate (PCU) and polybutadiene (PB) have been prepared and characterized. The simultaneous full IPN's of PCU and PB over the whole composition range (15-85% by weight PCU) exhibit a single phase morphology even though the linear chain blends are completely immiscible, as determined by DSC and confirmed by transmission electron microscopy (TEM). However, in both pseudo IPN's of PCU and PB there appeared multiple (melting and glass) transitions in DSC measurements and phase separation was observed by TEM. © 1992 John Wiley & Sons, Inc.     

Liquid crystalline compounds having a tribranched structure: substituted malonic esters consisting of two Schiff's base units and a cholesteryloxyalkyl substituent

New tribranched thermotropic liquid crystal compounds were synthesized and their liquid crystalline properties studied by differential scanning calorimetry, X-ray diffraction and polarizing optical microscopy. The compounds are the bis-{10-[4-(4-alkylphenyliminomethynyl)phenoxy]decyl} 2-[6-(cholesteryloxy)hexyl]malonates and the corresponding alkoxy derivatives. These compounds contain three mesogenic units, two identical Schiff's base type mesogens and one cholesteryl either moiety, interconnected in a tribranched structure via spacers. The cholesterly moiety is attached to the malonic acid core through an oxyhexamethylene spacer while the two Schiff's-base moieties are attached through oxydecamethylene spacers. The terminal alkyl group of the Schiff's base unit is either a butyl or decyl group, and the alkoxy terminal group is either a butoxy or decyloxy chain. All the compounds form only an enantiotropic smectic phase, most probably of the smectic C type. The larger spacings determined by small angle X-ray diffraction range from 3.3 to 4.1 nm, which are much shorter than the end-to-end distance (5.9-7.4 nm) of the molecules estimated using molecular models assuming an all trans extended conformation for all the alkyl spacers.