Programmable imaging with two-axis micromirrors

We demonstrate a means of creating a digital image by using a two-axis tilt micromirror to scan a scene. For each different orientation we extract a single gray scale value from the mirror and combine them to form a single composite image. This allows one to choose the distribution of the samples, and so in principle a variable resolution image could be created. We demonstrate this ability to control resolution and projection by constructing a voltage table that compensates for the nonlinear response of the mirrors to the applied voltage.     

采用选择激发研究光系统Ⅱ反应中心β-Car的物理特性

光系统Ⅱ反应中心包含有2个去镁叶绿素分子(Pheo),2个β胡萝卜素分子(β-Car)和6个叶绿素a分子(Chla).对反应中心的时间分辨荧光光谱表明,两个β-Car具有不同的吸收光谱,吸收峰分别为489 nm(Car489)和507 nm(Car507),Car489靠近吸收峰为667 nm和675 nm的叶绿素a(Chl a),它的主要功能是保护反应中心免受单态氧的破坏,而不能将激发能传递给光化学反应活性的色素分子P680;Car507靠近吸收峰为669 nm的Chl a分子;能够将激发能传递给P680,进行电荷分离.采用全局优化拟合的方法对荧光光谱进行处理,Car489在61 ps时间内将能量传递给Chl a672, 随后传给Chl a677,处于激发态的Chl a677在3 ns衰减到基态;Car507在274 ps时间内将能量传递给P680,P680＋Pheo-的电荷重组发生在3.8 ns和16 ns.     

Fluctuation spectroscopy of granularity in superconducting structures

We suggest to use "fluctuation spectroscopy" as a method to detect granularity in a disordered metal close to a superconducting transition. We show that with lowering temperature T the resistance R(T) of a system of relatively large grains initially grows due to the fluctuation suppression of the one-electron tunneling but decreases with further lowering T due to the coherent charge transfer of the fluctuation Cooper pairs. Under certain conditions, such a maximum in R(T) turns out to be sensitive to weak magnetic fields due to a novel Maki-Thompson-type mechanism.     

Geometric phase induced by a cyclically evolving squeezed vacuum reservoir

We propose a new way to generate an observable geometric phase by means of a completely incoherent phenomenon. We show how to imprint a geometric phase to a system by adiabatically manipulating the environment with which it interacts. As a specific scheme, we analyze a multilevel atom interacting with a broadband squeezed vacuum bosonic bath. As the squeezing parameters are smoothly changed in time along a closed loop, the ground state of the system acquires a geometric phase. We also propose a scheme to measure such a geometric phase by means of a suitable polarization detection.     

On the critical behaviour of a surface interacting linear polymer chain

A method based on a real space renormalization group transformation is developed to describe the critical behaviour of a surface interacting linear flexible polymer chain, represented by a self-avoiding walk. It is shown that a lattice model based on a central rule in which the starting point of the walk and the surface are taken to be in the middle of one cell, provides a suitable framework to study both the penetrable and impenetrable surfaces. In contrast to this, a method based on a corner rule in which the starting point of the walk and the surface are fixed to be one corner of a cell cannot describe the behaviour of a chain interacting with an impenetrable surface. The value of crossover exponent found by us for a square lattice are in agreement with those expected to be exact for both the cases.     

Trapped electron coupled to superconducting devices

We propose to couple a trapped single electron to superconducting structures located at a variable distance from the electron. The electron is captured in a cryogenic Penning trap using electric fields and a static magnetic field in the tesla range. Measurements on the electron will allow investigating the properties of the superconductor such as vortex structure, damping and decoherence. We propose to couple a superconducting microwave resonator to the electron in order to realize a circuit QED-like experiment, as well as to couple superconducting Josephson junctions or superconducting quantum interferometers (SQUIDs) to the electron. The electron may also be coupled to a vortex which is situated in a double well potential, realized by nearby pinning centers in the superconductor, acting as a quantum mechanical two level system that can be controlled by a transport current tilting the double well potential. The electron may also be coupled to a single vortex, thus hybridizing an elementary excitation of a superconductor and an elementary particle.     

Synthesis of magnetic systems producing field with maximal scalar characteristics

A method of synthesis of the magnetic systems (MSs) consisting of uniformly magnetized blocks is proposed. This method allows to synthesize MSs providing maximum value of any magnetic field scalar characteristic. In particular, it is possible to synthesize the MSs providing the maximum of a field projection on a given vector, a gradient of a field modulus and a gradient of a field energy on a given directing vector, a field magnitude, a magnetic flux through a given surface, a scalar product of a field or a force by a directing function given in some area of space, etc. The synthesized MSs provide maximal efficiency of permanent magnets utilization. The usage of the proposed method of MSs synthesis allows to change a procedure of projecting in principal, namely, to execute it according to the following scheme: (a) to choose the sizes, a form and a number of blocks of a system proceeding from technological (economical) reasons; (b) using the proposed synthesis method, to find an orientation of site magnetization providing maximum possible effect of magnet utilization in a system obtained in (a). Such approach considerably reduces a time of MSs projecting and guarantees maximal possible efficiency of magnets utilization. Besides it provides absolute assurance in “ideality” of a MS design and allows to obtain an exact estimate of the limit parameters of a field in a working area of a projected MS.The method is applicable to a system containing the components from soft magnetic material with linear magnetic properties.     

Hysteretic behavior induced by an electroacoustic feedback loop in a thermo-acousto-electric generator

An active control method of the spatial distribution of the acoustic field is applied in a thermo-acousto-electric generator. An auxiliary acoustic source is used to force the self-sustained thermoacoustic oscillation in order to control the thermoacoustic amplification. The auxiliary source consists of a loudspeaker, located inside the loop-tube close to the main ambient heat exchanger, and supplied with a delayed signal through an electric feedback loop, comprising a phase-shifter and an amplifier, connected to a reference microphone. Experiments are performed on a prototype engine working with air at a static gauge pressure of 5 bars. Experimental results demonstrate how it is possible to tune the acoustic oscillations in order to increase the global performance of the generator, compared to the case without control, as well as the existence of a hysteretic behavior induced by the electroacoustic feedback loop itself, which leads to a discrepancy between the onset heat input and the offset one.     

Synthetic gene network for entraining and amplifying cellular oscillations

We present a model for a synthetic gene oscillator and consider the coupling of the oscillator to a periodic process that is intrinsic to the cell. We investigate the synchronization properties of the coupled system, and show how the oscillator can be constructed to yield a significant amplification of cellular oscillations. We reduce the driven oscillator equations to a normal form, and analytically determine the amplification as a function of the strength of the cellular oscillations. The ability to couple naturally occurring genetic oscillations to a synthetically designed network could lead to possible strategies for entraining and/or amplifying oscillations in cellular protein levels.     

Gravitational coupling and dynamical reduction of the cosmological constant

We introduce a dynamical model to reduce a large cosmological constant to a sufficiently small value. The basic ingredient in this model is a distinction which has been made between the two unit systems used in cosmology and particle physics. We have used a conformal invariant gravitational model to define a particular conformal frame in terms of large scale properties of the universe. It is then argued that the contributions of mass scales in particle physics to the vacuum energy density should be considered in a different conformal frame. In this manner, a decaying mechanism is presented in which the conformal factor appears as a dynamical field and plays a key role to relax a large effective cosmological constant. Moreover, we argue that this model also provides a possible explanation for the coincidence problem.     

Comparison of a subrank to a full-rank time-reversal operator in a dynamic ocean

This paper investigates the application of time-reversal techniques to the detection and ensonification of a target of interest. The focusing method is based on a generalization of time-reversal operator techniques. A subrank time-reversal operator is derived and implemented using a discrete set of transmission beams to ensonify a region of interest. In a dynamic ocean simulation, target focusing using a subrank matrix is shown to be superior to using a full-rank matrix, specifically when the subrank matrix is captured in a period shorter than the coherence time of the modeled environment. Backscatter from the point target was propagated to a vertical 64-element source-receiver array and processed to form the sub-rank time-reversal operator matrix. The eigenvector corresponding to the strongest eigenvalue of the time-reversal operator was shown to focus energy on the target in simulation. Modeled results will be augmented by a limited at-sea experiment conducted on the New Jersey shelf in April-May 2004 measured low-frequency backscattered signal from an artificial target (echo repeater).     

Experimental confirmation of the Alhassid-Whelan arc of regularity

Evidence is presented to show that a group of nuclei, spanning a range of structures, corresponds to a previously proposed isolated region of regular behavior between vibrational and rotational structures that was never before observed empirically. Nuclei predicted to show such regular spectra correspond to Hamiltonian parameters that lie amidst those giving more chaotic spectra. We identify a key observable that has a one-to-one correspondence to this arc of regularity and which therefore provides both an empirical signature for it and a clue to its underlying nature.     

Inclusion of the causality principle in the dynamical description of nonequilibrium systems

In the nonequilibrium-statistical-operator (NSO) method a correction to the Hamiltonian of a system is found, corresponding to a source in the Liouville equation, which destroys the invariance of this equation with respect to time reversal. Analysis of this correction enables one to conclude that the forces leading to the irreversible behavior of a system are of an essentially nonpotential nature. Inclusion of the causality principle in the Hamiltonian of a system also makes it possible to give a new representation of the NSO.     

The shape gradient of the least-squares objective functional in optimal shape design problems of radiative heat transfer

Optimal shape design problems of steady-state radiative heat transfer are considered. The optimal shape design problem (in the three-dimensional space) is formulated as an inverse one, i.e., in the form of an operator equation of the first kind with respect to a surface to be optimized. The operator equation is reduced to a minimization problem via a least-squares objective functional. The minimization problem has to be solved numerically. Gradient minimization methods need the gradient of a functional to be minimized. In this paper the shape gradient of the least-squares objective functional is derived with the help of the shape sensitivity analysis and adjoint problem method. In practice a surface to be optimized may be (or, most likely, is to be) given in a parametric form by a finite number of parameters. In this case the objective functional is, in fact, a function in a finite-dimensional space and the shape gradient becomes an ordinary gradient. The gradient of the objective functional, in the case that the surface to be optimized is given in a finite-parametric form, is derived from the shape gradient. A particular case, that a surface to be optimized is a “two-dimensional” polyhedral one, is considered. The technique, developed in the paper, is applied to a synthetic problem of designing a “two-dimensional” radiant enclosure.     

The Riemann surface in the target space and vice versa

It is observed that the classical part of the partition function associated with the mappings from a genus-g Reimann surface Σ_g to an “almost complex” target space T_2d is equal to that related to the mappings Σ_d to T_2g. The classical part related to the mappings from a genus-2g Reimann surface Σ_2g described by a “real” period matrix, to a target space T_d is equal to the classical part related to mappings from Σ_2g to T_g. Some physical consequences of these mathematical identities are discusses.     

Measurement of surface concentration of fluorophores by fluorescence fluctuation spectroscopy

Fluorescence fluctuation spectroscopy is applied to study molecules passing through a small observation volume, usually subjected to diffusive or convective motion in a liquid phase. We suggest that such a technique could be used to measure the areal absolute concentration of fluorophores deposited on a substrate or embedded in a thin film, with a resolution of a few micrometers. The principle is to translate the solid substrate in front of a confocal fluorescence microscope objective and to record the subsequent fluctuations of the fluorescence intensity. The validity of this concept is investigated on model substrates (fluorescent microspheres) and DNA biochips.     

Reduction of turbulent boundary layer induced interior noise through active impedance control

The use of a single actuator tuned to an optimum impedance to control the sound power radiated from a turbulent boundary layer (TBL) excited aircraft panel into the aircraft interior is examined. An approach to calculating the optimum impedance is defined and the limitations on the reduction in radiated power by a single actuator tuned to that impedance are examined. It is shown that there are too many degrees of freedom in the TBL and in the radiation modes of the panel to allow a single actuator to control the radiated power. However, if the panel modes are lightly damped and well separated in frequency, significant reductions are possible. The implementation of a controller that presents a desired impedance to a structure is demonstrated in a laboratory experiment, in which the structure is a mass. The performance of such a controller on an aircraft panel is shown to be effective, if the actuator impedance is similar to but not the same as the desired impedance, provided the panel resonances are well separated in frequency and lightly damped.     

Optimization of robustness and connectivity in complex networks

Scale-free networks rely on a relatively small number of highly connected nodes to achieve a high degree of interconnectivity and robustness to random failure, but suffer from a high sensitivity to directed attack. In this paper we describe a parameterized family of networks and analyze their connectivity and sensitivity, identifying a network that has an interconnectedness closer to that of a scale-free network, a robustness to attack closer to that of an exponential network, and a resistance to failure better than that of either of those networks.     

The effects of a laser field on phase transitions in liquid crystals

We investigate theoretically some phase transitions in liquid crystals in the presence of a laser beam. We found, in non-absorbing nematics, a laser-induced one-way transition from a paranematic to a nematic phase. In absorbing nematics we found, in addition to this transition, a one-way transition from a nematic to a paranematic phase with increasing laser intensity. Further, we found a reentrant nematic or a reentrant paranematic via paranematic or nematic phase respectively. In the case of smectic A, laser absorption results in a coupling between the positional and orientational orders. As a result, the smectic A to nematic transition can change from second order to first order and the smectic C to smectic A transition can become first-order in the field of a laser.