Character of interaction and glass formation in the TlAs<Subscript>2</Subscript>Se<Subscript>4</Subscript>-Tl<Subscript>3</Subscript>As<Subscript>2</Subscript>S<Subscript>3</Subscript>Se<Subscript>3</Subscript> system

The TlAs₂Se₄-Tl₃As₂S₃Se₃ system was investigated by physicochemical methods (DTA, X-ray powder diffraction, microstructural analysis), and its phase diagram was constructed. The TlAs₂Se₄-Tl₃As₂S₃Se₃ join is a quasi-binary internal section of the As-Tl-S-Se quaternary system. The solubility range of TlAs₂Se₄-based solid solutions is extended to 7 mol %, and the region of Tl₃As₂S₃Se₃-based solid solutions is extended to 15 mol %.     

Thermal stability of Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>

Differential thermal analysis (DTA) and thermogravimetric analysis (TGA) of an α-Bi₂O₃ sample revealed staged phase transitions in the range 720–800°C (at 720, 780, and 800°C) and the elimination of oxygen to the composition Bi₂O_2.967 during heating to 895°C in air at 16 K/min. In dynamic vacuum (p = 1.33 Pa) at 780–800°C, Bi₂O₃ consecutively transforms to a phase with the cubic γ-Bi₂O₃ structure and tetragonal Bi₂O_2.3?2.4. In the latter, electron diffraction in a transmission electron microscope (ED/TEM) shows a superstructure with the superstructure vector q ₁₁₀ ≈ 1/9, which indicates an ordered arrangement of oxygen vacancies.     

Conductivity of Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-NiO composites

The conductivity and transport number of oxygen ions of Bi₂O₃-(10, 30, 50) vol % NiO composites are measured using the four-probe and coulomb-volumetric methods at various temperatures. It is shown that the Bi₂O₃-50 vol % NiO composite exhibits a high mixed ionic-electronic conductivity in the temperature range from 730 to 800°C.     

Electrochemical deposition of Bi<Subscript>2</Subscript>Te<Subscript>3</Subscript> for thermoelectric microdevices

The electrolyses of solutions of bismuth oxide and tellurium oxide in nitric acid with molar ratios of Bi:Te=3:3–4:3 lead to cathodic deposits of films of bismuth telluride (Bi₂Te₃), an n-type semiconductor. Current densities of 2–5 mA/cm² were applied. Voltammetric investigations showed that Bi₂Te₃ deposition occurred at potentials more negative than −0.125 V (Ag/AgCl, 3 M KCl). The deposit was identified as bismuth telluride (γ-phase) by X-ray analysis. Hall-effect measurements verified the n-type semiconducting behaviour. The films can be deposited in microstructures for thermoelectric microdevices like thermoelectric batteries or thermoelectric sensors.     

Thermal analysis of doped Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>

New environmentally inorganic pigments based on Bi₂O₃ doped by metal ions, such as Zr⁴⁺ and Dy³⁺ have been developed and characterized using the methods thermal analysis, X-ray powder diffraction, and spectral reflectance data. The compounds having formula Bi_2−x Dy _x/2Zr_3x/8O₃ (x = 0.2, 0.6, 1.0, and 1.2) were prepared by the solid state reaction. Methods of thermal analysis were used for determination of the temperature region of the pigment formation and thermal stability of compounds. The incorporation of doped ions in Bi₂O₃ changes the color from yellow to orange and also contributes to a growth of their thermal stability. This property gives a direction for coloring ceramic glazes.     

Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>/BiFeO<Subscript>3</Subscript> heterostructure: preparation,characterization, and photocatalytic activity

Bi₂O₃/BiFeO₃ composite was successfully fabricated by a conventional sol–gel method and structural properties were characterized based on X-ray diffractometer, scanning electron microscope, transmission electron microscope, energy-dispersive X-ray analyzer, nitrogen adsorption–desorption measurement, and UV–visible diffuse reflectance spectroscopy. Bi₂O₃/BiFeO₃ had a good absorption for visible light, which was benefit to photocatalytic activity. The highest degradation efficiency was obtained when the content of Bi₂O₃ in Bi₂O₃/BiFeO₃ was 63.9%. Effect of experimental conditions was investigated, and the highest photocatalytic activity of Bi₂O₃/BiFeO₃ was observed at photocatalyst dosage of 0.5 g/L, initial BPA concentration of 10 mg/L, and solution pH of 6.3. Bi₂O₃/BiFeO₃ photocatalyst exhibited enhanced photocatalytic activity for BPA, and the reaction rate constant over Bi₂O₃/BiFeO₃ composite was 2.23, 3.65, and 8.71 times higher than that of BiFeO₃, Bi₂O₃ and commercial TiO₂ (P25), respectively. Bi₂O₃/BiFeO₃ showed high photocatalytic activity after three cycles, suggesting that it was a stable photocatalyst. The possible photocatalytic mechanism has been discussed on the basis of the theoretical calculation and the experimental results. The hydroxyl and superoxide radicals together with photogenerated holes played significant roles in the photocatalytic reaction.     

Advanced Bi<Subscript>2</Subscript>O<Subscript>2.7</Subscript>/Bi<Subscript>2</Subscript>Ti<Subscript>2</Subscript>O<Subscript>7</Subscript> composite film with enhanced visible-light-driven activity for the degradation of organic dyes

Bi₂O_2.7/Bi₂Ti₂O₇ composite photocatalyst films are synthesized by sol–gel dip-coating. The ratio of adding Bi and Ti precursors can be controlled during the preparation process. The phase structure is confirmed by X-ray diffraction. The UV–visible diffuse reflectance spectrum shows that the composite catalysts present light absorption in the visible region. The obtained Bi₂O_2.7/Bi₂Ti₂O₇ composite films possess superior photocatalytic degradation of rhodamine B, owing to the visible light response of Bi₂O_2.7 and the separation of photogenerated electrons and holes between the two components. As a result, the Bi₂O_2.7/Bi₂Ti₂O₇ (Bi/Ti = 1:1) displays the highest photocatalytic activity under visible light or UV light irradiation for the degradation of different organic dyes, including methyl blue, methyl orange and acid orange 7.     

New subvalent bismuth telluroiodides incorporating Bi<Subscript>2</Subscript> layers: the crystal and electronic structure of Bi<Subscript>2</Subscript>TeI

Two new subvalent bismuth telluroiodides, Bi₂TeI and Bi₄TeI_1.25, were prepared by the gas-phase synthesis. The compositions of these phases were determined by energy-dispersive X-ray spectroscopy. X-ray diffraction study of melt grown Bi₂TeI single crystals demonstrated that the compound crystallizes in the monoclinic system (space group C/2m) with the unit cell parameters a = 7.586(1) Å, b = 4.380(1) Å, c = 17.741(3) Å, β = 98.20°. The layered crystal structure of Bi₂TeI consists of weakly bonded two dimensional blocks with a stoichiometry of the title compound. The blocks are stacked along the c axis. Each block consists of eight atomic layers alternating in the Te-Bi-I-Bi-Bi-I-Bi-Te order and includes a double layer of bismuth atoms. Based on the results of ab initio quantum-chemical calculations, the title compound is expected to possess a pronounced anisotropy of conductivity.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 86–91, January, 2005.     

Mass spectrometric investigation of vaporization in the Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> system

The thermodynamics of vaporization in the Bi₂O₃-Fe₂O₃ quasibinary system was studied by high-temperature mass-spectrometry. The partial pressures of the constituents of a saturated vapor over the system at 1100 K were determined. Based on the experimental data, the following parameters were calculated: the activities of the components of the Bi₂O₃-Fe₂O₃ system condensed phase, the standard enthalpies of some heterogeneous reactions, and standard enthalpies of formation and enthalpies of formation for crystalline BiFeO₃ and Bi₂Fe₄O₉ from individual oxides. An optimal temperature for the solid-phase synthesis of bismuth ferrites from simple oxides is recommended.     

Effect of SO<Subscript>2</Subscript> on chlorination of Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> + Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> mixtures

The reaction of Bi₂O₃ + Fe₂O₃ mixtures with chlorine and SO₂ at 250–700°C is studied. At 300–500°C, the degree of bismuth chloride sublimation from the oxide mixture increases in the presence of SO₂. Chemical sublimation of FeCl₃ occurs after BiCl₃ is virtually completely recovered from the solid phase.     

Entrapment of Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> nanoparticles in TiO<Subscript>2</Subscript> nanotubes for visible light-driven photocatalysis

In this study, we prepared nanoparticles of the visible light-responsive photocatalyst, Bi₂O₃ entrapped in anatase TiO₂ nanotubes (Bi₂O₃-in-TNTs) via a vacuum-assisted precursor-filling process followed by annealing. Owing to the unique tubular electronic structure of TiO₂ nanotubes, the interior of the nanotube is in an electron-deficient state, which was confirmed by XPS spectra and H₂-TPR. Electrochemical impedance studies showed that the Bi₂O₃-in-TNTs demonstrated a more efficient separation of photogenerated carriers than when Bi₂O₃ nanoparticles were deposited on the outer wall of TiO₂ nanotubes (Bi₂O₃-out-TNTs). Due to the confinement effect of TiO₂ nanotubes, which inhibits photogenerated carriers’ recombination, the Bi₂O₃-in-TNTs exhibited a better photocatalytic performance for the photo-degradation of methyl orange under visible light compared to Bi₂O₃-out-TNTs.     

Structure and properties of Ce<Subscript>3</Subscript>Pd<Subscript>3</Subscript>Bi<Subscript>4</Subscript>, CePdBi,and CePd<Subscript>2</Subscript>Zn<Subscript>3</Subscript>

The intermetallic cerium compounds Ce₃-Pd₃Bi₄, CePdBi, and CePd₂Zn₃ were synthesized from the elements in sealed tantalum ampoules in an induction furnace. The compounds were characterized by X-ray powder and single crystal diffraction: CeCo₃B₂ type (ordered version of CaCu₅), P6/mmm, a = 538.4(4), c = 427.7(4) pm, wR2 = 0.0540, 115 F ² values, 9 variables for CePd₂Zn₃ and Y₃Au₃Sb₄ type, I \({\bar 4}\)3d, a = 1005.2(2) pm, w R2 = 0.0402, 264 F ² values, 9 variables for Ce₃Pd₃Bi₄, and MgAgAs type, a = 681.8(1) pm for CePdBi. The bismuthide structures are build up from three-dimensional networks of corner-sharing PdBi₄ tetrahedra with Pd–Bi distances of 281 (Ce₃Pd₃Bi₄) and 296?pm (CePdBi), respectively. The cerium atoms are located in larger voids of coordination number 12 (Ce₃Pd₃Bi₄) and 10 (CePdBi). In CePd₂Zn₃ the cerium atoms fill larger channels within the three-dimensional [Pd₂Zn₃] network with 18 (6 Pd + 12 Zn) nearest neighbors. The three compounds contain stable trivalent cerium with experimental magnetic moments of μ_eff = 2.70(2), 2.48(1), and 2.49(1) μ_B/Ce atom for CePd₂Zn₃, Ce₃Pd₃Bi₄, and CePdBi, respectively. Susceptibility and specific heat data gave no hint for magnetic ordering down to 2.1?K.     

Crystallographic analysis of sulfides related to bismuthinite Bi<Subscript>2</Subscript>S<Subscript>3</Subscript>

The crystallographic analysis of Bi₂S₃, CuPbBi₅S₉, CuPbBi₃S₆, and CuPbBiS₃ compounds, representing a series with a successive replacement of a part of Bi atoms by Pb+Cu, shows that they are characterized by a stable combination of a pseudotetragonal cation framework with a pseudohexagonal anion one, which is common for all structures, within orthorhombic unit cells with n sizes of 11.2 Å, 4 Å, and 11.5 Å. The Bi₂S₃ cation framework is retained for the heavy Bi+Pb, and additional light Cu fill the available vacant sites without changing its geometry but varying the crystallographic symmetry within the orthorhombic crystal symmetry and unit cells of n standard blocks (11.2×4×11.5 ų).     

Thermal synthesis of the (Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>)<Subscript>1–x</Subscript>(Er<Subscript>2</Subscript>O<Subscript>3</Subscript>)<Subscript>x</Subscript> pigments

The synthesis of new compounds based on Bi₂O₃ is investigated because they can be used as new environmentally friendly inorganic pigments. Chemical compounds of the (Bi₂O₃)_1–x(Er₂O₃)_x type were synthetized. The host lattice of these pigments is Bi2O3 that is doped by Er³⁺ ions. The incorporation of doped ions provides interesting colours and contributes to an increase in the thermal stability of these compounds. The simultaneous TG-DTA measurements were used for determination of the temperature region of the pigment formation and thermal stability of pigments.     

Microstructure and Conduction of Composites Bi<Subscript>2</Subscript>CuO<Subscript>4</Subscript>-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> Near the Eutectic Melting Point

Microstructure and conduction of ceramic composites Bi₂CuO₄ + xBi₂O₃ (x = 5, 10, 15, 20 wt %) near the eutectic melting point (770°C) are studied. Bismuth oxide, initially randomly distributed over the ceramics bulk, after quenching from temperatures exceeding the eutectic melting point, becomes localized at triple junctions and grain boundaries in Bi₂CuO₄, which is caused by wetting grain boundaries and forming a liquid-channel structure. The jumpwise change in the composites’ conductivity near 730 and 770°C caused by polymorphic transformation of Bi₂O₃ and the eutectic melting with simultaneous formation of a liquid-channel structure. Transport numbers of the oxygen ion are measured at 770°C by coulomb-volumetric method. The conduction by oxygen ions increases in the composites with decreasing average size of Bi₂CuO₄ crystallites.__________Translated from Elektrokhimiya, Vol. 41, No. 5, 2005, pp. 596–601.Original Russian Text Copyright © 2005 by Lyskov, Metlin, Belousov, Tret’yakov.     

Possible ways to obtain materials based on bismuth titanate Bi<Subscript>4</Subscript>Ti<Subscript>3</Subscript>O<Subscript>12</Subscript>

Abietate- and cellulose-based procedures were developed for synthesis of Bi₄Ti₃O₁₂, a promising ferroelectric material.     

Synthesis processes and transport properties of solid solutions in the Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>-GeO<Subscript>2</Subscript>-V<Subscript>2</Subscript>O<Subscript>5</Subscript> system

The results of studies of solid solutions with the overall composition of Bi₄V_{2 ? x} Ge _x O_{11 ? δ} and Bi₄Ge_{3 ? x} V _x O_{12 + δ} are presented. The process of phase formation are studied during the synthesis of solid solution using the ceramic method and through liquid precursors. Crystallochemical parameters of the obtained compounds are determined. The size distribution of the particles is studied. Conductivity of annealed of polycrystalline samples as a function of temperature and composition is studied using the impedance spectroscopy method. The shape of impedance complex plane plots of the samples obtained in different ways is studied and analyzed.     

Phase equilibria in the PbSe-Bi<Subscript>2</Subscript>Se<Subscript>3</Subscript>-Se system and thermodynamic properties of intermediate phases

The Pb-Bi-Se system in the PbSe-Bi₂Se₃-Se-Se composition region was studied by measurement of concentration circuits of the type (−) PbSe(solid) liquid electrolyte, Pb²⁺(Pb-Bi-Se)(solid) (+) in the temperature range 300–430 K and by X-ray powder diffraction. A solid-phase equilibrium diagram was constructed, and the formation was confirmed for the ternary compounds Pb₅Bi₆Se₁₄, Pb₅Bi₁₂Se₂₃, and Pb₅Bi₁₈Se₃₂, which belong to the homologous series [(PbSe)₅] _m · [(Bi₂Se₃)₃] _n . From the emf versus temperature equations, the partial thermodynamic functions [`(DG)]\overline {\Delta G}, [`(DH)]\overline {\Delta H}, [`(DS)]\overline {\Delta S} of PbSe in alloys were calculated. Based on the solid-phase equilibrium diagram from these partial molar quantities using the corresponding data for PbSe and Bi₂Se₃, the standard thermodynamic functions of formation and standard entropies of the above ternary compounds were calculated.     

Interatomic interactions and electronic structure of NbSe<Subscript>2</Subscript> and Nb<Subscript>1.25</Subscript>Se<Subscript>2</Subscript> nanotubes

Atomic models of achiral NbSe₂ nanotubes are suggested. Band structure calculations have been performed to investigate the electronic structure and determine the parameters of interatomic interactions. The distribution of the density of states and pair bond occupancies of NbSe₂ nanotubes are analyzed in relation to the type of the atomic configuration and the tube diameter; the results are compared with the band structure of the 2H-NbSe₂ crystal. Calculations have been carried out on hypothetical superstoichiometric nanotubes with a formal composition Nb_1.25Se₂ as possible quasi-one-dimensional nanoforms of autointercalated niobium diselenide.Original Russian Text Copyright © 2004 by A. N. Enyashin, V. V. Ivanovskaya, I. R. Shein, Yu. N. Makurin, N. I. Medvedeva, A. A. Sofronov, and A. L. IvanovskiiTranslated from Zhurnal Strukturnoi Khimii, Vol. 45, No. 4, pp. 579–588, July–August, 2004.This revised version was published online in April 2005 with a corrected cover date.     

Crystallization process analysis for Se<Subscript>0.95</Subscript>In<Subscript>0.05</Subscript> and Se<Subscript>0.90</Subscript>In<Subscript>0.10</Subscript> chalcogenide glasses using the contemporary isoconversional models

Carrying out crystallization studies for both Se_0.95In_0.05 and Se_0.90In_0.10 chalcogenide glasses under non-isothermal conditions at different heating rates, it was realized that a rate controlling process occurs where random nucleation of one- to two-dimensional growth is accompanied with the introduction of up to 10 at% In into glassy Se matrix. The crystallization kinetics together with its dimensionality has been studied using the four currently used isoconversional models (Kissinger–Akahira–Sunose, Ozawa–Flynn–Wall, Tang, and Starink). The activation energy of crystallization (E _c) has been determined using these indicated four models where a satisfactory concurrence is achieved. The value of E _c shows a decrease while increasing both the In-content as well as the extent of crystallization.