BiFeO<Subscript>3</Subscript>-coated spinel LiNi<Subscript>0.5</Subscript>Mn<Subscript>1.5</Subscript>O<Subscript>4</Subscript> with improved electrochemical performance as cathode materials for lithium-ion batteries

Spinel LiNi_0.5Mn_1.5O₄ cathode material is a promising candidate for next-generation rechargeable lithium-ion batteries. In this work, BiFeO₃-coated LiNi_0.5Mn_1.5O₄ materials were prepared via a wet chemical method and the structure, morphology, and electrochemical performance of the materials were studied. The coating of BiFeO₃ has no significant impact on the crystal structure of LiNi_0.5Mn_1.5O₄. All BiFeO₃-coated LiNi_0.5Mn_1.5O₄ materials exhibit cubic spinel structure with space group of Fd3m. Thin BiFeO₃ layers were successfully coated on the surface of LiNi_0.5Mn_1.5O₄ particles. The coating of 1.0 wt% BiFeO₃ on the surface of LiNi_0.5Mn_1.5O₄ exhibits a considerable enhancement in specific capacity, cyclic stability, and rate performance. The initial discharge capacity of 118.5 mAh g^?1 is obtained for 1.0 wt% BiFeO₃-coated LiNi_0.5Mn_1.5O₄ with very high capacity retention of 89.11% at 0.1 C after 100 cycles. Meanwhile, 1.0 wt% BiFeO₃-coated LiNi_0.5Mn_1.5O₄ electrode shows excellent rate performance with discharge capacities of 117.5, 110.2, 85.8, and 74.8 mAh g^?1 at 1, 2, 5, and 10 C, respectively, which is higher than that of LiNi_0.5Mn_1.5O₄ (97.3, 90, 77.5, and 60.9 mAh g^?1, respectively). The surface coating of BiFeO₃ effectively decreases charge transfer resistance and inhibits side reactions between active materials and electrolyte and thus induces the improved electrochemical performance of LiNi_0.5Mn_1.5O₄ materials.     

Facile synthesis of single-crystalline Co<Subscript>3</Subscript>O<Subscript>4</Subscript> cubes as high-performance anode for lithium-ion batteries

Transition metal oxides have great potential as anode for lithium-ion batteries (LIBs), owing to their high theoretical capacity and low cost. However, the poor cycling stability and electron conductivity have limited the widely expected application of transition metal oxides. In this work, highly single-crystalline Co₃O₄ cubes with 400 nm in the average side length are successfully synthesized by a facile hydrothermal method. When used as anode for LIBs, the Co₃O₄ single-crystalline cubes exhibit highly stable and substantial discharge capacities of the amount to 877 mA h g^?1 at 200 mA g^?1 after 110 cycles with remarkable capacity retention of 98%, and 576 mA h g^?1 even at a high rate of 2000 mA g^?1. The scalability of the preparation method and the impressive results achieved here demonstrate the potential for the application to the future development of transition metal oxides anodes. These results suggest that the single-crystalline Co₃O₄ is a promising electrode material for the high-performance energy storage devices.     

Green fabrication of sandwich-like and dodecahedral C@Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>@C as high-performance anode for lithium-ion batteries

Sandwich-structured C@Fe₃O₄@C hybrids with Fe₃O₄ nanoparticles sandwiched between two conductive carbon layers have attracted more and more attention owing to enhanced synergistic effects for lithium-ion storage. In this work, an environment-friendly procedure is developed for the fabrication of sandwich-like C@Fe₃O₄@C dodecahedrons. Zeolitic imidazolate framework (ZIF-8)-derived carbon dodecahedrons (ZIF-C) are used as the carbon matrix, on which iron precursors are homogeneously grown with the assistance of a polyelectrolyte layer. The subsequent polydopamine (PDA) coating and calcination give rise to the formation of sandwiched ZIF-C@Fe₃O₄@C. When being evaluated as the anode material for lithium-ion batteries, the obtained hybrid manifests a high reversible capacity (1194 mAh g^?1 at 0.05 A g^?1), good high-rate behavior (796 mAh g^?1 at 10 A g^?1), and negligible capacity loss after 120 cycles.     

Facile synthesis of CoWO<Subscript>4</Subscript>/RGO composites as superior anode materials for lithium-ion batteries

In this paper, a facile method has been developed to synthesize supported CoWO₄ on the reduced graphene oxide (RGO) as high-performance anode material for Li-ion batteries. The composites with cuboid-like CoWO₄ nanoparticles were prepared by directly adding graphene oxide into the precursor solution followed by a hydrothermal treatment. Different analytical methods like high-resolution TEM, XRD, TGA, and XPS characterizations were employed to illustrate structural information of the as-prepared CoWO₄ and CoWO₄/RGO composites. In addition, the Li-ion battery performance using the composites as anode materials was also discussed based on the detailed galvanostatic charge-discharge cycling tests. The result shows that the specific capacity of the as-prepared CoWO₄/RGO composites can reach 533.3 mAh g^?1 after 50 cycles at a current density of 100 mA g^?1. During the whole cyclic process, the coulombic efficiency was maintained higher than 90%. Therefore, CoWO₄, as an environment-friendly and cost-effective anode material, has promising potential for Li-ion batteries.     

Interlayer-expanded MoS<Subscript>2</Subscript>/graphene composites as anode materials for high-performance lithium-ion batteries

A facile strategy was developed to prepare interlayer-expanded MoS₂/graphene composites through a one-step hydrothermal reaction method. MoS₂ nanosheets with several-layer thickness were observed to uniformly grow on the surface of graphene sheets. And the interlayer spacing of MoS₂ in the composites was determined to expand to 0.95 nm by ammonium ions intercalation. The MoS₂/graphene composites show excellent lithium storage performance as anode materials for Li-ion batteries. Through gathering advantages including expanded interlayers, several-layer thickness, and composited graphene, the composites exhibit reversible capacity of 1030.6 mAh g^?1 at the current density of 100 mA g^?1 and still retain a high specific capacity of 725.7 mAh g^?1 at a higher current density of 1000 mA g^?1 after 50 cycles.     

Effect of starting materials on electrochemical performance of sol-gel-synthesized Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> anode materials for lithium-ion batteries

In this study, the effect of the sol-gel starting materials with different particle sizes on the sol-gel-synthesized spinel Li₄Ti₅O₁₂ (LTO) was systematically investigated. The physical and electrochemical properties of the synthesized materials were characterized by X-ray diffraction, scanning electron microscopy, Brunauer-Emmett-Teller-specific surface area analyses, galvanostatic charge/discharge tests, cyclic voltammetry, and electrochemical impedance spectroscopy. It was found that the initial particle size of sol-gel starting material played a crucial role on the properties of as-prepared LTOs. The LTO synthesized with the relatively finer particle size of starting materials possessed relatively smaller particle size and larger specific surface area and therefore resulted in the superior electrochemical properties. The initial discharge capacity of the as-prepared LTO exhibited 168.2, 150.6, and 142.7 mAh g^?1 at current densities of 1, 5, and 10 C, respectively, and up to 95, 95, and 90 % of the corresponding initial discharge capacity was retained after 50 cycles.     

The influence of Li sources on physical and electrochemical properties of LiNi<Subscript>0.5</Subscript>Mn<Subscript>1.5</Subscript>O<Subscript>4</Subscript> cathode materials for lithium-ion batteries

LiNi_0.5Mn_1.5O₄ cathode materials were successfully prepared by sol–gel method with two different Li sources. The effect of both lithium acetate and lithium hydroxide on physical and electrochemical performances of LiNi_0.5Mn_1.5O₄ was investigated by scanning electron microscopy, Fourier transform infrared, X-ray diffraction, and electrochemical method. The structure of both samples is confirmed as typical cubic spinel with Fd3m space group, whichever lithium salt is adopted. The grain size of LiNi_0.5Mn_1.5O₄ powder and its electrochemical behaviors are strongly affected by Li sources. For the samples prepared with lithium acetate, more spinel nucleation should form during the precalcination process, which was stimulated by the heat released from the combustion of extra organic acetate group. Therefore, the particle size of the obtained powder presents smaller average and wider distribution, which facilitates the initial discharge capacity and deteriorates the cycling performance. More seriously, there exists cation replacement of Li sites by transition metal elements, which causes channel block for Li ion transference and deteriorates the rate capability. The compound obtained with lithium hydroxide exhibits better electrochemical responses in terms of both cycling and rate properties due to higher crystallinity, moderate particle size, narrow size distribution and lower transition cation substitute content.     

Al,B, and F doped LiNi<Subscript>1/3</Subscript>Co<Subscript>1/3</Subscript>Mn<Subscript>1/3</Subscript>O<Subscript>2</Subscript> as cathode material of lithium-ion batteries

A series of the mixed transition metal compounds, Li[(Ni_1/3Co_1/3Mn_1/3)_1–x-y Al _x B _y ]O_2-z F _z (x = 0, 0.02, y = 0, 0.02, z = 0, 0.02), were synthesized via coprecipitation followed by a high-temperature heat-treatment. XRD patterns revealed that this material has a typical α-NaFeO₂ type layered structure with R3^- m space group. Rietveld refinement explained that cation mixing within the Li(Ni_1/3Co_1/3Mn_1/3)O₂ could be absolutely diminished by Al-doping. Al, B and F doped compounds showed both improved physical and electrochemical properties, high tap-density, and delivered a reversible capacity of 190 mAh/g with excellent capacity retention even when the electrodes were cycled between 3.0 and 4.7 V.     

Rational design of double-confined Mn<Subscript>2</Subscript>O<Subscript>3</Subscript>/S@Al<Subscript>2</Subscript>O<Subscript>3</Subscript> nanocube cathodes for lithium-sulfur batteries

Due to the high specific capacities and environmental benignity, lithium-sulfur (Li-S) batteries have shown fascinating potential to replace the currently dominant Li-ion batteries to power portable electronics and electric vehicles. However, the shuttling effect caused by the dissolution of polysulfides seriously degrades their electrochemical performance. In this paper, Mn₂O₃ microcubes are fabricated to serve as the sulfur host, on top of which Al₂O₃ layers of 2 nm in thickness are deposited via atomic layer deposition (ALD) to form Mn₂O₃/S (MOS) @Al₂O₃ composite electrodes. The MOS@Al₂O₃ electrode delivers an excellent initial capacity of 1012.1 mAh g^?1 and a capacity retention of 78.6% after 200 cycles at 0.5 C, and its coulombic efficiency reaches nearly 99%, giving rise to much better performance than the neat MOS electrode. These findings demonstrate the double confinement effect of the composite electrode in that both the porous Mn₂O₃ structure and the atomic Al₂O₃ layer serve as the spacious host and the protection layer of sulfur active materials, respectively, for significantly improved electrochemical performance of the Li-S battery.     

Highly porous disk-like shape of Co<Subscript>3</Subscript>O<Subscript>4</Subscript> as an anode material for lithium ion batteries

A novel disk-like shape of Co₃O₄ with high porosity was synthesized by a facile hydrothermal approach followed by calcination at 485 °C for 2 h. In order to further confirm the crystal structure, morphology, particle size, surface area, and porosity of the sample, a series of corresponding characterization techniques were used. The disk-like shape of Co₃O₄ as an anode delivered excellent rate capability such as 510.5 mAh g^?1 at 4.0 C, which is much higher than the theoretical capacity of commercial graphite anode (372 mAh g^?1). However, the electrode could not recover the high capacity during the long-term cycling at various higher current rates due to the deformation of the structure as confirmed by the ex situ studies. It is believed that the obtained remarkable structural feature with numerous void pores within the structure may be helpful for short-term cycling due to the large contact areas between the electrode and the electrolyte and a shorter diffusion length for lithium ion insertion but unable to act as a buffer to relax the volume expansion/contraction and alleviate the structural damage of the electrode during long-term cycling.     

Ca- and Al-doped ZnFe<Subscript>2</Subscript>O<Subscript>4</Subscript> nanoparticles as possible anode materials

Spinel ferrites are an amazing class of materials that can find application in different fields, from sensors and lithium-ion batteries to the intriguing biomedical field. For the use as anode in lithium-ion batteries, ZnFe₂O₄ is rather competitive due to low price, abundance, environmental benignity, working voltage of ~1.5 V, and, most importantly, a high theoretical specific capacity (~1072 mA h g^?1). For its practical application, however, some issues must be overcome, in particular its fast capacity fading and poor rate capability resulting from an inherent low electronic conductivity. Possible strategies are represented by ferrite carbon coating/embedding, peculiar synthesis routes, and doping. In this frame, we synthesized Ca- and Al-doped ZnFe₂O₄ nanoparticles by using microwave-assisted combustion synthesis, followed by a classical carbon coating (determined as about 5 wt% by thermogravimetry). A good solubility of Ca and Al up to 25 atom% on both Zn and Fe sites was obtained. Cyclic voltammetries evidenced redox reactions involving Zn and Fe ions, but also the Al intervention could be supposed. Galvanostatic charge–discharge cycles proved that particularly Al ions were useful to improve the anode structural stability at high C rate (up to 3C), thanks to the stronger Al–O bonds with respect to Fe–O ones. A further improvement of capacities comes from the use of sodium alginate as binder to substitute polyvinylidene fluoride in the anode preparation.     

Sn-doped Li<Subscript>1.2</Subscript>Mn<Subscript>0.54</Subscript>Ni<Subscript>0.13</Subscript>Co<Subscript>0.13</Subscript>O<Subscript>2</Subscript> cathode materials for lithium-ion batteries with enhanced electrochemical performance

Sn-doped Li-rich layered oxides of Li_1.2Mn_0.54-x Ni_0.13Co_0.13Sn _x O₂ have been synthesized via a sol-gel method, and their microstructure and electrochemical performance have been studied. The addition of Sn⁴⁺ ions has no distinct influence on the crystal structure of the materials. After doped with an appropriate amount of Sn⁴⁺, the electrochemical performance of Li_1.2Mn_0.54-x Ni_0.13Co_0.13Sn _x O₂ cathode materials is significantly enhanced. The optimal electrochemical performance is obtained at x = 0.01. The Li_1.2Mn_0.53Ni_0.13Co_0.13Sn_0.01O₂ electrode delivers a high initial discharge capacity of 268.9 mAh g^?1 with an initial coulombic efficiency of 76.5% and a reversible capacity of 199.8 mAh g^?1 at 0.1 C with capacity retention of 75.2% after 100 cycles. In addition, the Li_1.2Mn_0.53Ni_0.13Co_0.13Sn_0.01O₂ electrode exhibits the superior rate capability with discharge capacities of 239.8, 198.6, 164.4, 133.4, and 88.8 mAh g^?1 at 0.2, 0.5, 1, 2, and 5 C, respectively, which are much higher than those of Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ (196.2, 153.5, 117.5, 92.7, and 43.8 mAh g^?1 at 0.2, 0.5, 1, 2, and 5 C, respectively). The substitution of Sn⁴⁺ for Mn⁴⁺ enlarges the Li⁺ diffusion channels due to its larger ionic radius compared to Mn⁴⁺ and enhances the structural stability of Li-rich oxides, leading to the improved electrochemical performance in the Sn-doped Li_1.2Mn_0.54Ni_0.13Co_0.13O₂ cathode materials.     

Nanofibers of V<Subscript>2</Subscript>O<Subscript>5</Subscript>/C@MWCNTs as the cathode material for lithium-ion batteries

Vanadium pentoxide (V₂O₅) nanofibers (NFs) with a thin carbon layer of 3–5 nm, which wrapped on V₂O₅ nanoparticles, and integrated multiwalled carbon nanotubes (MWCNTs) have been fabricated via simple electrospinning followed by carbonization process and post-sintering treatment. The obtained composite displays a NF structure with V₂O₅ nanoparticles connected to each other, and good electrochemical performance: delivering initial capacity of 320 mAh g^?1 (between 2.0 and 4.0 V vs. Li/Li⁺), good cycling stability (223 mAh g^?1 after 50 cycles), and good rate performance (~?150 mAh g^?1 at 2 A g^?1). This can attribute to the carbon wrapped on the V₂O₅ nanoparticles which can not only enhance the electric conductivity to decrease the impendence of the cathode materials but also maintain the structural stability to protect the nanostructure from the corruption of electrolyte and the strain stress due to the Li-ion intercalation/deintercalation during the charge/discharge process. And, the added MWCNTs play the role of framework of the unique V₂O₅ coated by carbon layer and composited with MWCNT NFs (V₂O₅/C@MWCNT NFs) to ensure the material is more stable.     

Saqima-like Co<Subscript>3</Subscript>O<Subscript>4</Subscript>/CNTs secondary microstructures with ultrahigh initial Coulombic efficiency as an anode for lithium ion batteries

In this work, Co₃O₄/CNTs composite with Saqima-like secondary microstructure has been synthesized by heat treatment of CoC₂O₄/CNTs precursors being obtained through ultrasonication-assisted precipitation method. Through SEM, in the composites, the microstructures are composed of tightly connected nanoparticles (30–50 nm), and abundant spaces exist among nanoparticles, which can relieve the strain produced by volume effect to ensure the stability of integral structure during cycles; CNTs are dispersed in microstructures and bridge between microstructures, which can form a long-range conductive network in the composite. The electrochemical test indicates that the composite shows ultrahigh initial coulombic efficiency (ICE) of 85%, as well as excellent rate performance and cyclic stability. The high ICE is mainly ascribed to the formation of a stable solid electrolyte interphase (SEI) film only on the outer surface of microstructures. This work offers an available and general way to improve the ICE of transitional metal oxide as an anode material for LIB.     

2-pyrrolidone - capped Mn<Subscript>3</Subscript>O<Subscript>4</Subscript> nanocrystals

Water-soluble Mn₃O₄ nanocrystals have been prepared through thermal decomposition in a high temperature boiling solvent, 2-pyrrolidone. The final product was characterized with XRD, SEM, TEM, FTIR and Zeta Potential measurements. Average crystallite size was calculated as ∼15 nm using XRD peak broadening. TEM analysis revealed spherical nanoparticles with an average diameter of 14±0.4 nm. FTIR analysis indicated that 2-pyrrolidone coordinates with the Mn₃O₄ nanocrystals only via O from the carbonyl group, thus confining their growth and protecting their surfaces from interaction with neighboring particles.      

Carbon nanotubes as a conductive additive in LiFePO<Subscript>4</Subscript> cathode material for lithium-ion batteries

The electrochemical properties and cyclic performances of commercial LiFePO₄ cathode material with different ratio of carbon black (CB) and carbon nanotubes (CNTs) as conductive material were tested in this study. Compared with other samples, the sample with 3 wt % CNTs exhibited the best electro-chemical and cyclic performances at various discharging rate at room temperature; and adhesion strength of electrode was improved by adding CNTs. The enhanced electrode performance may due to the unique natures of CNTs and the contact area of CNTs with active material or current collector.     

Magnetite/carbon core-shell nanorods as anode materials for lithium-ion batteries

Carbon coated magnetite (Fe₃O₄) core-shell nanorods were synthesized by a hydrothermal method using Fe₂O₃ nanorods as the precursor. Transmission electron spectroscopy (TEM) and high resolution TEM (HRTEM) analysis indicated that a carbon layer was coated on the surfaces of the individual Fe₃O₄ nanorods. The electrochemical properties of Fe₃O₄/carbon nanorods as anodes in lithium-ion cells were evaluated by cyclic voltammetry, ac impedance spectroscopy, and galvanostatic charge/discharge techniques. The as-prepared Fe₃O₄/C core-shell nanorods show an initial lithium storage capacity of 1120 mAh/g and a reversible capacity of 394 mAh/g after 100 cycles, demonstrating better performance than that of the commercial graphite anode material.     

Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/rice husk-based maco-/mesoporous carbon bone nanocomposite as superior high-rate anode for lithium ion battery

Rice husks (RHs), a kind of biowastes, are firstly hydrothermally pretreated by HCl aqueous solution to achieve promising macropores, facilitating subsequently impregnating ferric nitrate and urea aqueous solution, the precursor of Fe₃O₄ nanoparticles. A Fe₃O₄/rice husk-based maco-/mesoporous carbon bone nanocomposite is finally prepared by the high-temperature hydrothermal treatment of the precursor-impregnated pretreated RHs at 600 °C followed by NaOH aqueous solution treatment for dissolving silica and producing mesopores. The macro-/mesopores are able to provide rapid lithium ion-transferring channels and accommodate the volumetric changes of Fe₃O₄ nanoparticles during cycling as well. Besides, the macro-/mesoporous carbon bone can offer rapid electron-transferring channels through directly fluxing electrons between Fe₃O₄ nanoparticles and carbon bone. As a result, this nanocomposite delivers a high initial reversible capacity of 918 mAh g^?1 at 0.2 A g^?1 and a reversible capacity of 681 mAh g^?1 remained after 200 cycles at 1.0 A g^?1. The reversible capacities at high current densities of 5.0 and 10.0 A g^?1 still remain at high values of 463 and 221 mAh g^?1, respectively.     

Interdispersed silicon–carbon nanocomposites and their application as anode materials for lithium-ion batteries

As an anode material for lithium-ion batteries (LIBs), silicon offers among the highest theoretical storage capacity, but is known to suffer from large structural changes and capacity fading during electrochemical cycling. Nanocomposites of silicon with carbon provide a potential material platform for resolving this problem. We report a spray-pyrolysis approach for synthesizing amorphous silicon–carbon nanocomposites from organic silane precursors. Elemental mapping shows that the amorphous silicon is uniformly dispersed in the carbon matrix. When evaluated as anode materials in LIBs, the materials exhibit highly, stable performance and excellent Coulombic efficiency for more than 150 charge discharge cycles at a charging rate of 1 A/g. Post-mortem analysis indicates that the structure of the Si–C composite is retained after extended electrochemical cycling, confirming the hypothesis that better mechanical buffering is obtained when amorphous Si is embedded in a carbon matrix.