Thermally stimulated luminescence of a natural layered double hydroxide

Layered double hydroxides (LDHs) and many of the related hydrotalcite-like minerals have been well studied from the chemical and structural point of view; however, their luminescence properties have been scarcely studied. We herein report on the thermoluminescence (TL) behaviour of a natural LDH (Mg₆Cr₂CO₃(OH)₁₆·4H₂O), previously characterized by X-ray fluorescence, X-ray energy-dispersive spectrometry, electron probe microanalysis, thermogravimetry and differential thermal analysis, that exhibited a very complex green-IR spectral emission. The broad waveband peaked at ~?640 nm can be mainly linked to the ⁴T₁?→?⁶A₁ (at 570 nm), ⁴A_2g?→?²E_g (~?685 nm), ⁴T₁?→?⁶A₁ (~?700 nm), and ¹T_2g?→?³A_2g (green) and ¹T_2g?→?³T_2g (red) transitions due, respectively, to the presence of Mn²⁺, Cr³⁺, Fe²⁺ and Ni²⁺. The weak red-TL emission can likely be attributed to the quenching effect due to Fe (~?8–11%) ions substituting for Mg²⁺.     

Colorimetric detection of Fe3+/2+ and fluorescent detection of Al3+ in aqueous media: applications and DFT calculations

Abstract

A new multifunctional colorimetric and fluorescent chemosensor 1 for Fe^3+/2+ and Al³⁺ has been synthesized in the one-step procedure. The sensor 1 detected both Fe²⁺ and Fe³⁺ through the color change from yellow to brown and Al³⁺ via turn-on fluorescence. The binding stoichiometries of sensor 1 with Fe^3+/2+ and Al³⁺ were proposed to be 1:1 with the analyses of ESI-mass and Job plot. Importantly, the detection limits of 1 for Fe^3+/2+ (2.11 and 2.70 μM) and Al³⁺ (3.44 μM) were lower than the EPA guideline (5.37 μM) for Fe^3+/2+ and WHO guideline (7.41 μM) for Al³⁺. Compound 1 was used to quantify ferric species (Fe³⁺) in real samples. Moreover, the sensing processes for Fe^3+/2+ and Al³⁺ were proposed with the spectroscopic studies and theoretical calculations.     

A Nonenzymatic Glucose Sensor Based on a Copper Nanoparticle–Zinc Oxide Nanorod Array

A non-enzymatic sensor for glucose based on copper nanoparticles and zinc oxide nanorod array modified fluorine-doped tin oxide conductive glass electrode was constructed by two-step electrodeposition. The electrode was characterized by scanning electron microscopy and X-ray diffraction. The electrochemical behavior of the modified electrodes was investigated by cyclic voltammetry and electrochemical impedance spectroscopy. Under the optimal conditions, the modified electrode offered a rapid response to glucose in the range from 5 × 10^?6 M to 1.1 × 10^?3 M (R = 0.9975) with a detection limit of 3 × 10^?7 M (S/N = 3) and a sensitivity of 609.8 µA · mM^?1. The preparation and operation of the biosensor was simple, had lower cost, and offered excellent performance due to its high sensitivity, good stability, reproducibility, and selectivity against other substances. The satisfactory results illustrated that it was promising for the determination of glucose in alkaline solutions.     

Direct electrochemical sensing of ο-phenylendiamine based on perovskite-type nanomaterial LaNiTiO3–Fe3O4

An electrochemical sensor is developed in this work based on the new perovskite-type nanomaterial LaNiTiO₃–Fe₃O₄ for sensitive determination of o-phenylenediamine (OPD). As-synthesized materials and the surface of as-fabricated electrochemical sensor are characterized by X-ray diffraction, atomic force microscope, and electrochemical impedance spectroscopy, respectively. The results of characterizations depict that the sample is of nanoscaled complex oxides consisting of perovskite structure and spinel structure, and has good conductive properties. The construction and experimental conditions of the electrochemical sensor are also optimized. The electrochemical properties of OPD at glassy carbon electrode modified with LaNiTiO₃–Fe₃O₄ are investigated in alkaline solution (NaOH). The new electrochemical sensor exhibits high electrocatalytic activity and stability in NaOH, and a promotion of electrochemical oxidation of OPD at low potentials can be obviously observed. A wide linear range is obtained from 1.0?×?10^?6 to 7.0?×?10^?3 M with a relative low detection limit of 0.15 μM (S/N?=?3) under optimal conditions. Furthermore, the sensor exhibits reliable results for the determination of OPD in commercial samples.     

Electrochemical Properties of a Conducting Film Derived from Iron(II) Tris(diaminopolypyridyl) Complex in the S(IV) Oxoanions Reduction

A new conducting film derived from the complex [Fe (diaphen)₃]²⁺, (diaphen=5,6‐diamino‐1,10‐phenanthroline) was electropolymerized by cyclic voltammetry onto a glassy carbon electrode. Poly‐[Fe^II (diaphen)₃] was studied by cyclic voltammetry, SEM, UV‐vis and micro‐Raman spectroscopy. Poly‐[Fe^II (diaphen)₃] shows electrocatalytic activity in HSO₃^? reduction in an ethanol/water solution. Electrocatalysis is centered at the π ring of phenanthroline. Rotating disk electrode studies showed a 0.117 V/dec Tafel slope, suggesting an EC process where the electrochemical process is the determining step. The chemical step was studied by UV‐vis spectroelectrochemistry. Amperometric behavior showed a linear range between 47.5 µM to 417 µM and the LOD was 19.5 µM.     

Electrochemical detection of selenium using glassy carbon electrode modified with reduced graphene oxide

In this work, a simple experimental procedure was reported for the electroanalytical determination of selenium (IV) using reduced graphene oxide (rGO) to modify glassy carbon electrode (GCE). The rGO was obtained by reduction of graphene oxide obtained via Hummer’s method. The synthesised rGO was characterised using X-ray diffraction, Raman spectroscopy, scanning electron microscope (SEM), energy-dispersive spectroscopy and transmission Electron microscopy (TEM). GCE was modified with rGO and the electrochemical properties of the bare and modified electrode were investigated using cyclic voltammetry and electrochemical impedance spectroscopy. The results obtained showed that the modified electrode exhibited more excellent electrochemical properties than the bare GCE. The optimum conditions for detection of selenium in water using square wave anodic stripping voltammetry were as follows: deposition potential ?500 mV, pH 1, pre-concentration time of 240 s and 0.1 M nitric acid was used as supporting electrolyte. The linear regression equation obtained was I (µA) = 0.8432C + 9.2359 and the detection limit was calculated to be 0.85 μg L^?1. However, Cu(II) and Cd(II) are the two cations that interfered in the analysis of selenium in water.

The sensor was also applied for real sample water analysis and the result obtained was affirmed with inductively coupled plasma optical emission spectroscopic method. It is believed that our proposed sensor hold promise for practical application.     

Synthesis,crystal structure,and fluorescence properties of two 1-D chain polymers extended by a semi-rigid bis(triazole) ligand

Two 1-D luminescent metal-organic frameworks with identical structures, {[Mn(BBPTZ)₂(MeCN)₂]·(ClO₄)₂}_n (1) and {[Zn(BBPTZ)₂(MeCN)₂]·(MeCN)₂·(ClO₄)₂}_n (2), have been synthesized under solvent diffusion evaporation and characterized by elemental analyses, thermal analyses and single-crystal X-ray diffraction. Both complexes crystallize in the monoclinic system, space group C2/c with six-coordinate M(II). Thermal decompositions of the complexes have been studied using thermogravimetric analyses (TGA). The complexes exhibit a significant fluorescence quenching effect to Fe³⁺ in acetonitrile solution. The LoDs (Limit of Detection) of the complexes to Fe³⁺ are 2.59 × 10^?8 M and 1.57 × 10^?8 M for 1 and 2, respectively. The complexes could be applied to efficient chemosensor for Fe³⁺ detection.     

Carbon paste electrode modified with Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles and BMI.PF<Subscript>6</Subscript> ionic liquid for determination of estrone by square-wave voltammetry

A carbon paste electrode (CPE) modified with Fe₃O₄ nanoparticles (Fe₃O₄ NP) and the ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (IL BMI.PF₆) was employed for the electroanalytical determination of estrone (E1) by square-wave voltammetry (SWV). At the modified electrode, cyclic voltammograms of E1 in B–R buffer (pH 12.0) showed an adsorption-controlled irreversible oxidation peak at around +0.365 V. The anodic current increased by a factor of five times and the peak potential shifted 65 mV to less positive values compared with the unmodified CPE. Under optimized conditions, the calibration curve obtained showed two linear ranges: from 4.0 to 9.0 μmol L^?1 and from 9.0 to 100.0 μmol L^?1. The limits of detection (LOD) and quantification (LOQ) attained were 0.47 and 4.0 μmol L^?1, respectively. The proposed modified electrode was applied to the determination of E1 in pork meat samples. Data provided by the proposed modified electrode were compared with data obtained by UV–vis spectroscopy. The outstanding performance of the electrochemical device indicates that Fe₃O₄ NP and the IL BMI.PF₆ are promising materials for the preparation of chemically modified electrodes for the determination of E1.     

OH functionalized Multi-Walled Carbon Nanotube modified electrode as electrochemical sensor for the detection of Aceclofenac

ABSTRACT

The rapid electrochemical determination of Aceclofenac (ACF) has been employed by cyclic voltammetry (CV), differential pulse voltammetry (DPV) using developed OH-functionalised multiwalled carbon nanotube carbon paste electrode (OH-MWCNT/CPE). Modified electrode was characterised by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDAX), X-ray diffraction spectroscopy (XRD), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The ACF exhibits two oxidation peaks at +0.4 V, +0.66 V and one reduction peak at +0.3 V. The active surface area of the bare carbon paste electrode (BCPE) and modified electrode have been characterised by using K₃[Fe(CN)₆] solution containing 0.1 M KCl. In DPV mode, variation of ACF gave the limit of detection (LOD = 3s/m) 0.246 μM over the concentration range 1.0 to 190.0 μM (R² = 0.9994). The developed electrode has good stability, reproducibility and could be successfully validated for the detection of ACF in pharmaceutical samples and biological fluids.     

Amperometric Biosensors Based on Platinum Nanowires

Abstract

Platinum nanowires (PtNW) were prepared by an electrodeposition strategy using nanopore alumina template. The nanowires prepared were dispersed in chitosan (CHIT) solution and stably immobilized onto the surface of glassy carbon electrode (GCE). The electrochemical behavior of PtNW‐modified electrode and its application to the electrocatalytic reduction of hydrogen peroxide (H₂O₂) are investigated. The modified electrode allows low potential detection of hydrogen peroxide with high sensitivity and fast response time. As an application example, the glucose oxidase was immobilized onto the surface of PtNW‐modified electrode through cross‐linking by glutaric dialdehyde. The detection of glucose was performed in phosphate buffer at –0.2 V. The resulting glucose biosensor exhibited a short response time (<8 s), with a linear range of 10^?5?10^?2 M and detection limit of 5×10^?6 M.     

Electrochemical investigation of a novel metalloporphyrin intercalated layered niobate modified electrode and its electrocatalysis on ascorbic acid

Cationic iron (III) tetrakis-5, 10, 15, 20-(N-methyl-4-pyridyl) porphyrin (Fe^IIITMPyP) was intercalated into layered semiconductor KNb₃O₈ by ion-exchange method. The target product was characterized by XRD, Fourier transform infrared, UV–vis, and TGA. Fe^IIITMPyP forms an inclined monolayer between Nb₃O₈ ^? nanosheets and endues the nanocomposite with excellent electrochemical catalytic activities. The target nanocomposite modified glass carbon electrode shows good electrocatalytic activities for the oxidation of ascorbic acid (AA); the catalytic mechanism was proposed. Differential pulse voltammetric technique was used for detection of AA in neutral aqueous solution; a detection limit of 4.2?×?10^?5 M was obtained, and the modified electrode showed good reproducibility in electrochemical detection.     

A novel palladium nanoparticles-polyproline-modified graphite electrode and its application for determination of curcumin

A novel-modified electrode has been developed, by electrodeposition of palladium nanoparticles (PdNps) on polypyroline film-coated (Poly(Pr)) graphite electrode. The modified electrode (PdNps/Poly(Pr)/GE) was characterized by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) techniques. SEM proved that the palladium nanoparticles were uniform distributed with an average particle diameter of 20–45 nm. A higher catalytic activity was obtained for curcumin oxidation using this new modified electrode (PdNps/Poly(Pr)/GE). The square wave voltammogram of curcumin in pH 2 phosphate buffer exhibited an anodic peak at 0.504 V. This oxidation peak current was found to be linearly related to curcumin concentrations in the ranges of 5.0?×?10^?9 to 1.0?×?10^?7 M with a detection limit of 1.2?×?10^?9 M. This novel-modified electrode showed excellent sensitivity, compared with the existing reports about determination of curcumin.     

Determination of Trichloroacetic Acid (TCAA) Using CdO Nanoparticles Modified Carbon Paste Electrode

In this paper, the electrochemical behavior of a carbon paste electrode modified with CdO nanoparticles as a potential electrocatalyst for the reduction of trichloroacetic acid (TCAA) was investigated using cyclic voltammetry and double‐potential step chronoamperometry. The modified electrode showed a great enhancement in cathodic peak current with respect to reduction of TCAA in acidic aqueous solution. Using this increment, a quantitative method was developed for the determination of TCAA in aqueous solution. The detection limit and linear dynamic range of TCAA are 2.3×10^?6 M and 2.3×10^?4–3×10^?6 M, respectively.     

Reduction of hexavalent chromium at solid electrodes in acidic media: reaction mechanism and analytical applications

The electrochemical detection of hexavalent chromium species was investigated. It was found that Cr(VI) can undergo chemically irreversible reduction in acidic solutions at gold, glassy carbon and boron-doped diamond electrodes. The process was found to be diffusionally controlled at all three electrodes studied. The response obtained at a gold electrode towards the reduction of chromium(VI) produced an electrochemically reversible wave in contrast to those recorded at glassy carbon and boron-doped diamond electrodes. The analytical response of the hexavalent species was studied at gold electrodes in the presence of common environmental interferences: Ni²⁺, Cu²⁺, Fe³⁺, Cr³⁺ and Triton X-100 (surfactant), with an LoD of 4.3 μM obtained in the presence of 5 mM Cr(III).     

Efficient separation of nitrite from aqueous solutions by grafting metalloporphyrin on Fe3O4 nanoparticles

A new sorbent comprising 3-aminopropyltriethoxy-silane-coated magnetic nanoparticles functionalized with organic moieties containing the cobalt(III) porphyrin complex Co (TCPP) [TCPP: 4,4′,4″,4″′-(21H,23H-porphine-5,10,15,20-tetrayl)tetrakis (benzoic acid)], was prepared, for nitrite removal from drinking water. Fe₃O₄ nanoparticles were synthesized by co-precipitation of Fe²⁺ and Fe³⁺, then surface of the Fe₃O₄ nanoparticles was modified with APTES and Co (TCPP). The sorbent was characterized using FTIR, TGA, XRD, SEM and TEM analysis. The batch experiments showed that the proposed sorbent can effectively be used to remove nitrite from water. Various parameters such as pH of the solution, contact time, sorbent dosage, concentration of desorbing reagent, and influence of other interfering anions have been investigated. Under optimal conditions for a nitrite concentration of 10 mg L^?1 (i.e., contact time 15 min, pH 5.5 and nanosorbents dosage 100 mg), the percentage of the extracted nitrite ions was 92.0. Nitrite sorbing material was regenerated with 10 mM NaOH up to 97.0 %. The regeneration studies also showed that nanosorbents are regenerable and can be used for a couple of times.     

The preparation of LaSr<Subscript>3</Subscript>Fe<Subscript>3</Subscript>O<Subscript>10 − <Emphasis Type="Italic">δ</Emphasis></Subscript> and its electrochemical performance

LaSr₃Fe₃O_10 ? δ powders were synthesized by hydrothermal method and characterized by XRD and SEM. The XRD patterns showed that the sample calcined at 1000 °C was single phase and the sample calcined at 900 °C had tiny amount of LaSrFeO₄ phase. The single-phase LaSr₃Fe₃O_10 ? δ powders were used to prepare test electrode. The capacitive behaviors of LaSr₃Fe₃O_10 ? δ electrode were analyzed by cyclic voltammetry, galvanostatic charge-discharge techniques, and electrochemical impedance spectroscopy. The electrochemical results showed a capacity as high as 470 F g^?1 at a scan rate of 1 mV s^?1 and 380 F g^?1 at a charge-discharge current density of 0.1 A g^?1 in 6 M KOH solution. The electrode showed good cyclic stability since its capacitive retention is 87.1% after 1000 charge-discharge cycles. The electrochemical performances suggest that LaSr₃Fe₃O_10 ? δ could be a potential candidate as a capacitive electrode material.     

Electrochemical deposition and characterization of polyppyrrole coatings doped with nickel cobalt oxide for environmental applications

Electrochemical depositions of hybrid polypyrrole/nickel cobalt oxide (PPy/NiCoO) coatings onto ferritic stainless steel surface were carried out with different electrochemical techniques from 0.1 M pyrrole (Py) in 0.2-M oxalic acid (OA) solution and less than 150-nanometer-sized NiCoO particles. The structural properties of the composite were investigated by using different methods such as transmission electron microscopy (TEM), scanning electron microscopy (SEM) with energy-dispersive X-ray spectrometer (EDS) and Raman spectroscopy. The embedded NiCoO particles, uniformly distributed onto the surface of the PPy film, have similar oxide ratios corresponding to a mixed oxide structure. The electrochemical characterization was done using polarization curves and linear sweep voltammetry (LSV) related to oxygen reduction reaction (ORR) in alkaline solution and hydrogen peroxide as an oxygen source. Concerning the exchange current densities for ORR, the obtained values (between 1.06 and 1.45?×?10^?3 mA cm^?2 for a total amount of NiCoO of 0.1 mg cm^?2) are comparable with other polymer films with Pt.     

Complexation of metal ions with the novel diazadithia crown ethers carrying two pyrene pendants in acetonitrile-tetrahydrofuran

Two crown ethers carrying pyrene side arms with nitrogen-sulfur donor atom were designed and synthesized by the reaction of the corresponding macrocyclic compounds and 1-bromomethyl-pyrene. The influence of metal cations such as Al³⁺, Zn²⁺, Fe²⁺, Fe³⁺, Co²⁺, Ni²⁺, Mn²⁺, Cu²⁺, Cd²⁺, Hg²⁺ and Pb²⁺ on the spectroscopic properties of the ligands was investigated in acetonitrile-tetrahydrofuran (1:1) by means of absorption and emission spectrometry. Absorption spectra show isosbestic points in the spectrophotometric titration of Al³⁺, Zn²⁺, Fe²⁺, Ni²⁺, Cu²⁺, and Pb²⁺ with 16-membered crown ether. Similar results were obtained for Al³⁺, Fe²⁺, Hg²⁺, Cu²⁺ and Pb²⁺ with 14-membered crown ether. The results of spectrophotometric titration experiments disclosed the complexation stoichiometry and complex stability constants of the novel ligands with these cations. According to spectrofluorimetric titration measurements the 14-membered diazadithia crown ether showed sensitivity for Pb²⁺ with linear range and detection limit of 1.3 × 10^?6 to 5.2 × 10^?5 M and 5.2 × 10^?7 M, respectively. The 16-membered diazadithia crown ether showed sensitivity for Ni²⁺ with linear range and detection limit of 1.3 × 10^?7 to 5.2 × 10^?6 M and 4.1 × 10^?8 M, respectively.     

Characteristics of nanosized LiNi x Fe1−x PO4/C (x = 0.00–0.20) composite material prepared via sol–gel-assisted carbothermal reduction method

Pure LiFePO₄ and LiNi _x Fe_1?x PO₄/C (x?=?0.00–0.20) nanocomposite cathode materials have been synthesized by cheap and convenient sol–gel-assisted carbothermal reduction method. X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy, and inductively coupled plasma have been used to study the phase, morphology, and chemical composition of un-doped and Ni-doped materials. XRD patterns display the slight shrinkage in crystal lattice of LiFePO₄ after Ni²⁺ doping. The SEM images have revealed that Ni-doped particles are not agglomerated and the particle sizes are practically homogeneously distributed. The particle size is found between 50 and 100 nm for LiNi_0.20Fe_0.80PO₄/C sample. The discharge capacity at 0.2 C rate has increased up to 155 mAh g^?1 for the LiNi_0.05Fe_0.95PO₄/C sample and good capacity retention of 99.1 % over 100 cycles, while that of the unsubstituted LiFePO₄/C and pure LiFePO₄ has showed only 122 and 89 mAh g^?1, respectively. Doping with Ni has a noticeable effect on improving its electrical conductivity. However, serious electrochemical declension will occur when its doping density is beyond 0.05 mol LiNi_0.20Fe_0.80PO₄/C electrode shows only 118 mAh g^?1, which is less than un-doped LiFePO₄/C sample at 0.2 C. The cycling voltammogram demonstrates that Ni-doped LiNi_0.05Fe_0.95PO₄/C electrode has more stable lattice structure, enhanced conductivity, and diffusion coefficient of Li⁺ ions, in which Ni²⁺ is regarded to act as a column in crystal lattice structure to prevent the collapse during cycling process.     

Simultaneous Determination of Catechol and Hydroquinone on Nano-Co/L-Cysteine Modified Glassy Carbon Electrode

In this study, a novel and highly sensitive electrochemical method for simultaneous determination of catechol (CC) and hydroquinone (HQ) was developed, which worked at GCE modified with Nano cobalt (Nano-Co) by electrodeposition and L-Cysteine by electrochemical polymerization. The Nano-Co/L-Cysteine GCE was investigated by cyclic voltammetry (CV), SEM and EIS. The excellent conditions have been selected including supporting electrolyte, pH, accumulation time and scan rate. The calibration curves of were obtained that the linear regression equation was I=0.0734c+6×10⁻⁶ in the range of 5.8 μM to 103 μM (R²=0.9942) for CC and the linear regression equation was I=0.0566c+5×10⁻⁶ in the range of 5.8 μM to 100 μM (R²=0.9967) for HQ. The obtained detection limits of CC and HQ both were 6×10⁻⁷ M. The modified electrode was successfully applied to the simultaneous determination of CC and HQ in water samples.