Composite electrocatalyst Mo<Subscript>x</Subscript>W<Subscript>1-x</Subscript>S<Subscript>2</Subscript> nanosheets on carbon fiber paper for highly efficient hydrogen evolution reaction

Molybdenum disulfide (MoS₂) or tungsten disulfide (WS₂), as a promising catalyst, is widely investigated for hydrogen evolution reaction (HER). In this work, a composite electrocatalysts Mo_xW_1-xS₂ is successfully decorated on carbon fiber paper (CFP) through a facile hydrothermal method. The three-dimensional porous CFP can enable the diffusion and penetration of electrolyte. Comparing with MoS₂ and WS₂ catalyst, the composite electrocatalyst Mo_xW_1-xS₂ nanosheets can expose the large number of electrochemically active sites. Hence, the as-prepared Mo_xW_1-xS₂/CFP (3:1) exhibit the outstanding HER catalytic activity with the small Tafel slope of 68 mV dec^?1 and the low overpotential of ??178.4?±?0.5 mV at a current density of 10 mA cm^?2. Chronoamperometric current test for 18 h confirm the long-term stability of the composite electrocatalyst.     

WS<Subscript>2</Subscript> grafted on silicon and nano-silicon particles etched: a high-performance electrocatalyst for hydrogen evolution reaction

Most of research has been carried out for the development of electrocatalysts for hydrogen evolution reaction (HER), which are high activity and low cost. In this study, a practical, usable, highly active, cheap, and none noble metal catalyst was developed for HER. To this end, tungsten disulfide supported on silicon (WS₂/Si) and on silicon nanoparticles (WS₂/nano-Si) were prepared. To increase the catalytic activity of WS₂/nano-Si, chemical etching was used to prepare WS₂/nano-Si etched. The synthesized electrocatalysts were characterized using Fortier transform infrared spectroscopy, field emission scanning electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffraction methods. To evaluate the electrochemical attributes of WS₂/Si and WS₂/n-Si before and after chemical etching, electrochemical impedance spectroscopy, linear sweep, and cyclic voltammetry were used. The electrochemical measurements indicated an intense activity of the WS₂/nano-Si/etched, through a high density of the current and low overpotential for HER, with a small overpotential of 0.14 V, Tafel slopes as small as 45 mV dec^?1, and large cathodic currents. These results show that through etching process of silicon in HF the quantities of the active sites have been changed and increased considerably.     

Folded nanosheet-like Co<Subscript>0.85</Subscript>Se array for overall water splitting

Active, stable, and earth-abundant bifunctional electrocatalyst for overall water splitting is pivotal to actualize large-scale water splitting via electrolysis. In this work, the hierarchical folded nanosheet-like Co_0.85Se array on Ni foam is constructed by liquid-phase chemical conversion with cobalt precursor nanorod array. It can serve as an efficient bifunctional electrocatalyst for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) in alkaline electrolyte, with a current density of 10 mA cm^?2 at overpotential of 232 mV for OER and 129 mV for HER and Tafel slope of 78.9 mV dec^?1 for OER and 95.0 mV dec^?1 for HER, respectively. The two-electrode alkaline water electrolyzer utilizing this folded nanosheet-like Co_0.85Se array as both anode and cathode toward overall water splitting offered a current of 10 mA cm^?2 at a cell voltage of 1.60 V. This work explores an efficient and low-cost electrocatalyst for overall water splitting application in alkaline electrolytes.     

Layered LiNi<Subscript>0.80</Subscript>Co<Subscript>0.15</Subscript>Al<Subscript>0.05</Subscript>O<Subscript>2</Subscript> as cathode material for hybrid Li<Superscript>+</Superscript>/Na<Superscript>+</Superscript> batteries

LiNi_0.80Co_0.15Al_0.05O₂ (NCA) is explored to be applied in a hybrid Li⁺/Na⁺ battery for the first time. The cell is constructed with NCA as the positive electrode, sodium metal as the negative electrode, and 1 M NaClO₄ solution as the electrolyte. It is found that during electrochemical cycling both Na⁺ and Li⁺ ions are reversibly intercalated into/de-intercalated from NCA crystal lattice. The detailed electrochemical process is systematically investigated by inductively coupled plasma-optical emission spectrometry, ex situ X-ray diffraction, scanning electron microscopy, cyclic voltammetry, galvanostatic cycling, and electrochemical impedance spectroscopy. The NCA cathode can deliver initially a high capacity up to 174 mAh g^?1 and 95% coulombic efficiency under 0.1 C (1 C?=?120 mA g^?1) current rate between 1.5–4.1 V. It also shows excellent rate capability that reaches 92 mAh g^?1 at 10 C. Furthermore, this hybrid battery displays superior long-term cycle life with a capacity retention of 81% after 300 cycles in the voltage range from 2.0 to 4.0 V, offering a promising application in energy storage.     

Electrochemical sensor using graphene/Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanosheets functionalized with garlic extract for the detection of lead ion

Based on the modulated electronic properties of Fe₃O₄-graphene (Fe₃O₄/GN composite) as well as the outstanding complexation between Pb²⁺ and natural substances garlic extract (GE), a novel electrochemical sensor for the determination of Pb²⁺ in wastewater was prepared by immobilization of Fe₃O₄/GN composite integrated with GE onto the surface of glassy carbon electrode (GCE). Fe₃O₄/GN composite was employed as an electrochemical active probe for enhancing electrical response by facilitating charge transfer while GE was used to improve the selectivity and sensitivity of the proposed sensor to Pb²⁺ assay. The electrochemical sensing performance toward Pb²⁺ was appraised by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and square wave voltammetry (SWV). Under the optimized condition, the sensor exhibited two dynamic linear ranges (LDR) including 0.001 to 0.5 nM and 0.5 to 1000 nM with excellent low detection limit (LOD) of 0.0123 pM (S/N =?3) and quantification limit (LOQ) of 0.41 pM (S/N =?10). Meanwhile, it displayed remarkable stability, reproducibility (RSD of 3.61%, n =?3), and selectivity toward the assay for the 100-fold higher concentration of other heavy metal ions. Furthermore, the novel sensor has been successfully employed to detect Pb²⁺ from real water samples with satisfactory results.     

Supercapacitive performance of homogeneous Co<Subscript>3</Subscript>O<Subscript>4</Subscript>/TiO<Subscript>2</Subscript> nanotube arrays enhanced by carbon layer and oxygen vacancies

Self-supported and binder-free electrodes based on homogeneous Co₃O₄/TiO₂ nanotube arrays enhanced by carbon layer and oxygen vacancies (Co₃O₄/co-modified TiO₂ nanotube arrays (m-TNAs)) are prepared via a simple and cost-effective method in this paper. The highly ordered TNAs offer direct pathways for electron and ion transport and can be used as 3D substrate for the decoration of electroactive materials without any binders. Then, by a facile one-step calcination process, the electrochemical performance of the as-obtained carbon layer and oxygen vacancy m-TNAs is approximately 83 times higher than that of pristine TNAs. In addition, Co₃O₄ nanoparticles are uniformly deposited onto the m-TNAs by a universal chemical bath deposition (CBD) process to further improve the supercapacitive performance. Due to the synergistic effect of m-TNAs and Co₃O₄ nanoparticles, a maximum specific capacitance of 662.7 F g^?1 can be achieved, which is much higher than that of Co₃O₄ decorated on pristine TNAs (Co₃O₄/TNAs; 166.2 F g^?1). Furthermore, the specific capacitance retains 86.0 % of the initial capacitance after 4000 cycles under a high current density of 10 A g^?1, revealing the excellent long-term electrochemical cycling stability of Co₃O₄/m-TNAs. Thus, this kind of heterostructured Co₃O₄/m-TNAs could be considered as promising candidates for high-performance supercapacitor electrodes.     

Waste-yeast biomass as nitrogen/phosphorus sources and carbon template: Environment-friendly synthesis of N,P-Mo2C nanoparticles on porous carbon matrix for efficient hydrogen evolution

Tailor-made advanced electrocatalysts with high active and stable for hydrogen evolution reaction （HER）play a key role in the development of hydrogen economy.Herein,a N,P-co-doped molybdenum carbide confined in porous carbon matrix （N,P-Mo₂C/NPC） with a hierarchical structure is prepared by a resources recovery process.The N,P-Mo₂C/NPC compound exhibits outstanding HER activity with a low overpotential of 84 mV to achieve 10 mA/cm²,and excellent stability in alka...     

NiCo<Subscript>2</Subscript>O<Subscript>4</Subscript>/rGO hybrid nanostructures for efficient electrocatalytic oxygen evolution

We report the synthesis of NiCo₂O₄/reduced graphene oxide (NiCo₂O₄/rGO) hybrid hierarchical structures with unique nanonet and microsphere morphologies by organic polar solvent-assisted solvothermal method. The electrocatalytic oxygen evolution reaction (OER) activity of these materials is studied by cyclic voltammetry, linear sweep voltammetry and chronoamperometry methods in O₂-saturated 0.1 M KOH solution. The NiCo₂O₄/rGO hybrid nanocomposite materials are found to be highly active electrocatalysts for OER at lower overpotentials. The nanonet and microsphere-like NiCo₂O₄/rGO catalysts require overpotentials of 0.450 and 0.530 V at a current density of 10 mA cm^?2, and their corresponding Tafel slopes are 53 and 62 mV dec^?1, which are much lower than values reported for non-precious electrocatalysts. Further, both NiCo₂O₄/rGO catalysts show good catalytic stability with current retention more than 92 % over long period of 15,000 s determined by chronoampirometry and at the end of 1000th cycle determined by linear sweep voltammetry. The enhanced OER activity of nanostructured NiCo₂O₄/rGO hybrid catalysts is attributed to synergistic interaction between rGO and NiCo₂O₄, which seems to be essential for maintaining the large contact area at the electrode-electrolyte interface, better mass, and charge transport and to minimize the aggregation of NiCo₂O₄ nanoparticles.     

In Situ Growth of Ultrafine Pt Nanoparticles onto Hierarchical Co3O4 Nanosheet-Assembled Microflowers for Efficient Electrocatalytic Hydrogen Evolution

The development of Pt-based electrocatalysts with high Pt utilization efficiency toward the hydrogen evolution reaction (HER) is of great significance for the future sustainable hydrogen economy. For rational design of high-performance HER electrocatalyst, the simultaneous consideration of both thermodynamic and kinetic aspects remains greatly challenging. Herein, a simple template-derived strategy is demonstrated for the in situ growth of ultrafine Pt nanoparticles onto Co₃O₄ nanosheet-assembled microflowers (abbreviated as Pt/Co₃O₄ microflowers hereafter) by using the pre-fabricated PtCo-based Hofmann coordination polymer as reactive templates. The elaborate preparation of such intriguing hierarchical architecture with well-dispersed tiny Pt nanoparticles, abundant metal/oxide heterointerfaces and open configuration endows the formed Pt/Co₃O₄ microflowers with high Pt utilization efficiency, rich active sites, lowered energy barrier for water dissociation and expedited reaction kinetics. Consequently, the Pt/Co₃O₄ microflowers exhibit superior HER activity with a relatively low overpotential of 34 mV to deliver a current density of 10 mA cm⁻², small Tafel slope (34 mV dec⁻¹) and outstanding electrochemical stability, representing an attractive electrocatalyst for practical water splitting. What's more, our concept of in situ construction of metal/oxide heterointerfaces may provide a new opportunity to design high-performance electrocatalysts for a variety of applications.     

Multifunctional Active-Center-Transferable Platinum/Lithium Cobalt Oxide Heterostructured Electrocatalysts towards Superior Water Splitting

Designing cost-effective and efficient electrocatalysts plays a pivotal role in advancing the development of electrochemical water splitting for hydrogen generation. Herein, multifunctional active-center-transferable heterostructured electrocatalysts, platinum/lithium cobalt oxide (Pt/LiCoO₂) composites with Pt nanoparticles (Pt NPs) anchored on LiCoO₂ nanosheets, are designed towards highly efficient water splitting. In this electrocatalyst system, the active center can be alternatively switched between Pt species and LiCoO₂ for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Specifically, Pt species are the active centers and LiCoO₂ acts as the co-catalyst for HER, whereas the active center transfers to LiCoO₂ and Pt turns into the co-catalyst for OER. The unique architecture of Pt/LiCoO₂ heterostructure provides abundant interfaces with favorable electronic structure and coordination environment towards optimal adsorption behavior of reaction intermediates. The 30 % Pt/LiCoO₂ heterostructured electrocatalyst delivers low overpotentials of 61 and 285 mV to achieve 10 mA cm⁻² for HER and OER in alkaline medium, respectively.     

NixCo3‐xO4 Nanoneedle Arrays Grown on Ni Foam as an Efficient Bifunctional Electrocatalyst for Full Water Splitting

Developing highly active, stable and robust electrocatalysts based on earth‐abundant elements for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) is important for many renewable energy conversion processes. Herein, Ni_xCo_3‐xO₄ nanoneedle arrays grown on 3D porous nickel foam (NF) was synthesized as a bifunctional electrocatalyst with OER and HER activity for full water splitting. Benefiting from the advantageous structure, the composite exhibits superior OER activity with an overpotential of 320 mV achieving the current density of 10 mA cm^?2. An exceptional HER activity is also acquired with an overpotential of 170 mV at the current density of 10 mA cm^?2. Furthermore, the catalyst also shows the superior activity and stability for 20 h when used in the overall water splitting cell. Thus, the hierarchical 3D structure composed of the 1D nanoneedle structure in Ni_xCo_3‐xO₄/NF represents an avenue to design and develop highly active and bifunctional electrocatalysts for promising energy conversion.     

Towards high-performance cathode materials for lithium-ion batteries: Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-coated LiNi<Subscript>0.8</Subscript>Co<Subscript>0.15</Subscript>Zn<Subscript>0.05</Subscript>O<Subscript>2</Subscript>

Zn-doped LiNi_0.8Co_0.2O₂ exhibits impressive electrochemical performance but suffers limited cycling stability due to the relative large size of irregular and bare particle which is prepared by conventional solid-state method usually requiring high calcination temperature and prolonged calcination time. Here, submicron LiNi_0.8Co_0.15Zn_0.05O₂ as cathode material for lithium-ion batteries is synthesized by a facile sol-gel method, which followed by coating Al₂O₃ layer of about 15 nm to enhance its electrochemistry performance. The as-prepared Al₂O₃-coated LiNi_0.8Co_0.15Zn_0.05O₂ cathode delivers a highly reversible capacity of 182 mA h g^?1 and 94% capacity retention after 100 cycles at a current rate of 0.5 C, which is much superior to that of bare LiNi_0.8Co_0.15Zn_0.05O₂ cathode. The enhanced electrochemistry performance can be attributed to the Al₂O₃-coated protective layer, which prevents the direct contact between the LiNi_0.8Co_0.15Zn_0.05O₂ and electrolyte. The escalating trend of Li-ion diffusion coefficient estimated form electrochemical impedance spectroscopic (EIS) also indicate the enhanced structural stability of Al₂O₃-coated LiNi_0.8Co_0.15Zn_0.05O₂, which rationally illuminates the protection mechanism of the Al₂O₃-coated layer.     

Multifunctional Active‐Center‐Transferable Platinum/Lithium Cobalt Oxide Heterostructured Electrocatalysts towards Superior Water Splitting

Designing cost‐effective and efficient electrocatalysts plays a pivotal role in advancing the development of electrochemical water splitting for hydrogen generation. Herein, multifunctional active‐center‐transferable heterostructured electrocatalysts, platinum/lithium cobalt oxide (Pt/LiCoO₂) composites with Pt nanoparticles (Pt NPs) anchored on LiCoO₂ nanosheets, are designed towards highly efficient water splitting. In this electrocatalyst system, the active center can be alternatively switched between Pt species and LiCoO₂ for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. Specifically, Pt species are the active centers and LiCoO₂ acts as the co‐catalyst for HER, whereas the active center transfers to LiCoO₂ and Pt turns into the co‐catalyst for OER. The unique architecture of Pt/LiCoO₂ heterostructure provides abundant interfaces with favorable electronic structure and coordination environment towards optimal adsorption behavior of reaction intermediates. The 30 % Pt/LiCoO₂ heterostructured electrocatalyst delivers low overpotentials of 61 and 285 mV to achieve 10 mA cm^?2 for HER and OER in alkaline medium, respectively.     

A new tavorite LiTiPO<Subscript>4</Subscript>F electrode material for aqueous rechargeable lithium ion battery

Herein, we demonstrate a safe, inexpensive, and stable cycle-life aqueous rechargeable Li-ion battery system using tavorite LiTiPO₄F as anode and Li[Li_0.2Co_0.3Mn_0.5]O₂ as cathode in aqueous electrolyte using 2 M Li₂SO₄. These materials have been synthesized via a simple and an efficient method called RAPET (reaction under autogenic pressure at elevated temperature) method, and for the first time, we have evaluated the electrochemical properties of LiTiPO₄F in aqueous electrolyte. Structural and morphological features have been characterized using X-ray diffraction and scanning electron microscopy techniques, and the electrochemical studies have been investigated by using cyclic voltammetry, galvanostatic charge/discharge studies, electrochemical impedance spectroscopic technique, potentiostatic intermittent titration techniques, and galvanostatic intermittent titration techniques. In galvanostatic charge/discharge studies, the capacity, cycle life, and columbic efficiency of LiTiPO₄F have been tested in combination with Li [Li_0.2Co_0.3Mn_0.5]O₂ cathode. In particular, LiTiPO₄F shows capacity of 82 mA h g^?1, the capacity retention was maintained 90 % even after the 45th cycle.     

Co1-xS embedded in porous carbon derived from metal organic framework as a highly efficient electrocatalyst for oxygen evolution reaction

Here, we report a two-step conversion method to fabricate a composite of Co_1-xS embedded in porous carbon framework (Co_1-xS@C) derived from metal organic frameworks (MOFs). The as-prepared porous dodecahedron Co_1-xS@C composite catalyst exhibits excellent electrocatalytic performance towards oxygen evolution reaction (OER).     

Correlation between the structural,electrical and electrochemical performance of layered Li(Ni<Subscript>0.33</Subscript>Co<Subscript>0.33</Subscript>Mn<Subscript>0.33</Subscript>)O<Subscript>2</Subscript> for lithium ion battery

The Li(Ni_0.33Co_0.33Mn_0.33)O₂ (LNCMO) cathode material is prepared by poly(vinyl pyrrolidone) (PVP)-assisted sol-gel/hydrothermal and poly(ethylene glycol)-block-poly(propylene glycol)-block-poly (ethylene glycol) (Pluronic-P123)-assisted hydrothermal methods. The compound prepared by PVP-assisted hydrothermal method shows a comparatively higher electrical conductivity of ~2?×?10^?5 S cm^?1 and exhibits a discharge capacity of 152 mAh g^?1 in the voltage range of 2.5 to 4.4 V, for a C-rate of 0.2 C, whereas the compounds prepared by P123-assisted hydrothermal method and PVP-assisted sol-gel method show a total electrical conductivity in the order of 10^?6 S cm^?1 and result in poor electrochemical performance. The structural and electrical properties of LNCMO (active material) and its electrochemical performance are correlated. The difference in percentage of ionic and electronic conductivity contribution to the total electrical conductivity is compared by transference number studies. The cation disorder is found to be the limiting factor for the lithium ion diffusion as determined from ionic conductivity values.     

Oxygen evolution on Ti/Co<Subscript>3</Subscript>O<Subscript>4</Subscript>-coated electrodes in alkaline solution

The electrochemical performances of Co₃O₄ nanopowders, obtained by the sol-gel method, were investigated and compared with those of commercial Co₃O₄ powders, for oxygen evolution reaction in alkaline solution. The active oxide powder was mixed with teflon and assembled on Ti substrate to form thin catalyst film. Cyclic voltammetry, polarization curves, and electrochemical impedance spectroscopy were used to assess the mechanism of oxygen evolution reaction, chemical structure, and morphology of the catalyst. Presented at the 33rd International Conference of the Slovak Society of Chemical Engineering, Tatranské Matliare, 22–26 May 2006.     

Effects of polyvinyl alcohol on the electrochemical performance of LiNi<Subscript>0.8</Subscript>Co<Subscript>0.15</Subscript>Al<Subscript>0.05</Subscript>O<Subscript>2</Subscript> cathode material

In view of the close relationship between the morphology of LiNi_0.8Co_0.15Al_0.05O₂ (NCA) and its electrochemical performance, polyvinyl alcohol (PVA) was added to control the NCA morphology. And thus a new NCA cathode material modified by PVA (NCA-PVA) was prepared. The morphology and structure of the obtained samples were characterized by X-ray diffraction, scanning electron microscopy, and laser diffraction. The electrochemical performance was characterized with electrochemical workstation and cell tester by assembling into CR2032 coin-type half-cell. The results show that the obtained NCA-PVA has a better layer structure and smaller cation mixing degree, smaller particle size, and more uniform particle size distribution than the pristine NCA without adding PVA. The electrochemical performance is also improved: the initial discharge capacity increases from 143.36 to 184.84 mAh g^?1. And the charge-discharge efficiency increases from 78.25 to 86.42%. The specific discharge capacities of NCA-PVA are all higher than that of the NCA (about 50 mAh g^?1) at all testing rates (0.1, 0.2, 0.5, 1.0, 2.0, and 5.0 C).     

Enhanced electrochemical properties of pseudocapacitor with Bi<Subscript>3.64</Subscript>Mo<Subscript>0.36</Subscript>O<Subscript>6.55</Subscript> NPs as electrodes

In this work, Bi_3.64Mo_0.36O_6.55 nanoparticles (NPs) were successfully prepared by a facile hydrothermal method and utilized in pseudocapacitor for the first time. Within a redox potential range from ?1.0 to 0 V vs. Hg/HgO in a 1 M aqueous KOH solution by cyclic voltammetry (CV), chronopotentiometry (CP) and AC impendence, the specific capacitance could reach 998 F g^?1 at 1 A g^?1, which is possibly ascribed to the higher Bi content of Bi_3.64Mo_0.36O_6.55 NPs. Furthermore, the Bi_3.64Mo_0.36O_6.55 NP electrode exhibited good cycle stability maintaining over 85 % after 5000 cycles. These results demonstrated Bi_3.64Mo_0.36O_6.55 NPs might be a promising electrode material for pseudocapacitor.

Open image in new window

Graphical abstract The fabrication of uniform Bi_3.64Mo_0.36O_6.55 nanoparticles with a diameter of 100 nm were succefully reported by a facial hydrothermal method, which exhibits a extraordinary electronic performance with 998 F g^-1 at 1 A g^-1 and cycling stability

     

EQCM study of redox properties of PEDOT/MnO<Subscript>2</Subscript> composite films in aqueous electrolytes

Electrochemical behavior of poly-3,4-ethylenedioxythiophene composites with manganese dioxide (PEDOT/MnO₂) has been investigated by cyclic voltammetry and electrochemical quartz crystal microbalance at various component ratios and in different electrolyte solutions. The electrochemical formation of PEDOT film on the electrode surface and PEDOT/MnO₂ composite film during the electrochemical deposition of manganese dioxide into the polymer matrix was gravimetrically monitored. The mass of manganese dioxide deposited into PEDOT at different time of electrodeposition and apparent molar mass values of species involved into mass transfer during redox cycling of PEDOT/MnO₂ composites were evaluated. It was found that during the redox cycling of PEDOT/MnO₂ composite films with various MnO₂ content, the oppositely directed fluxes of counterions (anions and cations) occur, resulting in a change of the slope of linear parts of the Δf–E plots with changing the mass fraction of MnO₂ in the composite film.Rectangular shape of cyclic voltammograms of PEDOT/MnO₂ composites with different loadings of manganese dioxide was observed, which is characteristic of the pseudocapacitive behavior of the composite material. Specific capacity values of PEDOT/MnO₂ composites obtained from cyclic voltammograms were about 169 F g^?1. The specific capacity, related to the contribution of manganese dioxide component, was about 240 F g^?1.