Thermal buckling of piezo-FGM shallow spherical shells

Thermal instability of shallow spherical shells made of functionally graded material (FGM) and surface-bonded piezoelectric actuators is studied in this paper. The governing equations are based on the first order theory of shells and the Sanders nonlinear kinematics equations. It is assumed that the property of the functionally graded materials vary continuously through the thickness of the shell according to a power law distribution of the volume fraction of the constituent materials. The constituent material of the functionally graded shell is assumed to be a mixture of ceramic and metal. The analytical solutions are obtained for three types of thermal loadings and constant applied actuator voltage. Results for simpler states are validated with the known data in literature.     

Experimental studies of the buckling of complete spherical shells

Complete spherical shells with radius-to-thickness ratios of from 1570 to 2120 were produced by electroforming. For specimens of good quality and for optimum testing conditions, buckling pressures up to 86 percent of the classical value were obtained.The effect of loading-system characteristics was examined by pressurizing spherical shells in rigid and soft systems and no difference in buckling pressure was observed. It was found that buckling behavior is strongly influenced by the nature and severity of flaws or imperfections; i.e., low buckling pressures can be correlated with the presence of severe flaws or nonuniformities.Paper was presented at 1967 SESA Spring Meeting held in Ottawa, Ontario, Can., on May 16–19.     

Nonlinear dynamic buckling of symmetrically laminated cylindrically orthotropic shallow spherical shells

Summary In this paper, a model of cusped catastrophe at nonlinear dynamic buckling of a symmetrically laminated cylindrically orthotropic shallow spherical shell is presented. The shell is subjected to an axisymmetrical load. Effects of transverse shear are taken into account. Effects of the shear modulus, geometry and parameters of the material on the nonlinear dynamic buckling are discussed. Received 2 April 1997; accepted for publication 27 November 1997     

Experimental investigation of the buckling instability of monocoque shells

Buckling of a series of thin-metal, shallow spherical shells under a uniform hydrostatic pressure has been investigated. Stress and deformation histories, as well as the critical buckling pressure and the post-buckling behavior, have been determined. Comparisons with theoretical analyses for buckling of spherical caps are given. Results are presented for an initial phase of a stability study of truncated conical sections which have been subjected to combinations of axial load and lateral pressure. A series of roll-formed and butt-welded, truncated aluminum conical shells with a 75-deg base angle have been tested. Buckle modes for axial-load condition alone, laterial-pressure load alone and combinations of these loading conditions are described. Interaction curves for the conditions investigated are given.     

爆炸冲击下复合材料层合扁球壳的动力屈曲

研究计及横向剪切的复合材料层合扁球壳在爆炸冲击载荷作用下的非线性轴对称动力屈曲问题。通过在复合材料层合扁球壳非线性稳定性的基本方程中增加横向转动惯量项并引入R.H.Cole理论的爆炸冲击力,得到爆炸冲击下复合材料层合扁球壳的动力控制方程,应用Galerkin方法得到用顶点挠度表达的爆炸冲击动力响应方程,并采用Runge-Kutta方法进行数值求解,采用Budiansky-Roth准则确定冲击屈曲的临界载荷,讨论了壳体几何尺寸对复合材料层合扁球壳冲击屈曲的影响;数值算例表明,此方法是可行的。     

Thermal buckling of axisymmetrically laminated cylindrically orthotropic shallow spherical shells including transverse shear

The nonlinear thermal buckling of symmetrically laminated cylindrically orthotropic shallow spherical shell under temperature field and uniform pressure including transverse shear is studied. Also the analytic formulas for determining the critical buckling loads under different temperature fields are obtained by using the modified iteration method. The effect of transverse shear deformation and different temperature fields on critical buckling load is discussed.     

Nonlinear dynamic response and dynamic buckling of shallow spherical shells with circular hole

In this paper, the nonlinear equations of motion for shallow spherical shells with axisymmetric deformation including transverse shear are derived. The nonlinear static and dynamic response and dynamic buckling of shallow spherical shells with circular hole on elastically restrained edge are investigated. By using the orthogonal point collocation method for space and Newmark-β scheme for time, the displacement functions are separated and the nonlinear differential equations are replaced by linear algebraic equations to seek solutions. The numerical results are presented for different cases and compared with available data.     

THE CREEP EFFECTS ON THE BUCKLING OF SHALLOW SHELLS

An analysis of the creep effects on the buckling of concreteshallow shells is presented in this paper.Based on the non-linear theory of thin elastic shells.it is found that forthose of the elliptical paraboloidal type.the upper cri-tical load of the load-deflection curve will decrease whilethe lower limit Will increase with time.As to the problemof local buckling of the shell.the critical load is de-pendent only upon the modulus of elasticity at the instantit occurs.     

Snap-through buckling of eccentrically stiffened shallow spherical caps

The problem of snap-through buckling of a clamped, eccentrically stiffened shallow spherical cap is considered under quasi-statically applied uniform pressure and a special case of dynamically applied uniform pressure. This dynamic case is the constant load infinite duration case (step time-function) and it represents an extreme case of blast loading-large decay time, small decay rate.The analysis is based on the nonlinear shallow shell equations under the assumption of axisymmetric deformations and linear stress-strain laws. The eccentric stiff eners are disposed orthogonally along directions of principal curvature in such a way that the smeared mass, and extensional and flexural stiffnesses are constant. The stiffeners are also taken to be one-sided with constant eccentricity, and the stiffener-shell connection is assumed to be monolithic.The method developed in an earlier paper is employed. In this method, critical pressures are associated with characteristics of the total potential surface in the configuration space of the generalized coordinates.In addition, buckling of the complete thin eccentrically stiffened spherical shell under uniform quasi-statically applied pressure is considered, and these results are used to check the numerical answers. The complete spherical shell is stiffened in the same manner as the shallow cap.The results are presented in graphical form as load parameter vs initial rise parameter. Geometric configurations corresponding to isotropic, lightly stiffened, moderately stiffened and heavily stiffened geometries are considered. By lightly stiffened geometry one means that most of the extensional stiffness is provided by the thin shell. A computer program was written to solve for critical pressures. The Georgia Tech Univac 1108 high speed digital computer was used for this purpose.     

Some remarks on the theory of shallow spherical shells

Conclusions It is shown that Vlasov's explicit solutions for shallow spherical shells correspond to a very special boundary condition which does not usually occur in practice.A shell loaded by a normal loading p is fully discussed and it is shown that the discrepancy between these results and those obtained by Vlasov may be considerable. An asymptotic solution of the same problem is also given.Finally it is indicated how Geckeler's approximate equations can be derived from a suitable transformation of the linearized Marguerre equations.This paper was prepared under the support of the Argentine Council for Scientific and Technological Research.     

Torsional buckling of spherical shells under circumferential shear loads

ＩｎｔｒｏｄｕｃｔｉｏｎＩｍｐｏｒｔａｎｔａｐｌｉｃａｔｉｏｎｓｏｆｔｈｅｓｔａｂｉｌｉｔｙａｎａｌｙｓｉｓｏｆｓｈｅｌｓｃａｎｂｅｆｏｕｎｄｉｎｔｈｅｍｏｄｅｒｎｅｎｇｉｎｅｒｉｎｇｒａｎｇｉｎｇｏｖｅｒｔｈｅａｅｒｏｓｐａｃｅ,ｍａｒｉｎｅ,ａｒ...     

Experimental buckling of GRP cylindrical shells

During the setup of an experiment, errors may occur. Sources of such errors may be due to several factors which sometimes accumulate and then cause erroneous results. An experimental investigation on buckling of GRP (glass-reinforced-plastic) cylindrical shells, subject to axial compression and/or external pressure loading, has been carried out. At the beginning of the experiment, the initial geometrical imperfections were measured. Because of the small size of these quantities and the great effect these imperfections had on buckling loads, any small errors in the measurement procedure may lead to unreasonable results. Attempts have been made to detect these errors, and to identify and minimize their effect on experimental results. Tables are provided to show a comparison between the final experimental results and the corresponding theoretical ones.     

Dynamic elastic and plastic buckling of complete spherical shells

A theoretical investigation is undertaken into the dynamic instability of complete spherical shells which are loaded impulsively and made from either linear elastic or elastic-plastic materials. It is shown that certain harmonics grow quickly and cause a shell to exhibit a wrinkled shape which is characterized by a critical mode number. The critical mode numbers are similar for spherical and cylindrical elastic shells having the same R/h ratios and material parameters, but may be larger or smaller in an elastic-plastic spherical shell depending on the values of the various parameters. Threshold velocities are also determined in order to obtain the smallest velocity that a shell can tolerate without excessive deformation. The threshold velocities for the elastic and elastic-plastic spherical shells are larger than those which have been published previously for cylindrical shells having the same R/h ratios and material parameters.     

Classical and nonlinear buckling analyses of spherical sandwich shells

The buckling and initial postbuckling behavior of clamped shallow spherical sandwich shells with dissimilar face sheets under a uniform pressure is studied. The numerical results show that the buckling and initial post-buckling behavior of clamped shallow spherical sandwich shells with dissimilar face sheets is similar to that of the corresponding homogeneous shell.