Modification and characterization of semi-crystalline poly(vinyl alcohol) with interpenetrating poly(acrylic acid) by UV radiation method for alkaline solid polymer electrolytes membrane

Semi-crystalline poly(vinyl alcohol) was modified by UV radiation with acrylic acid monomer to get interpenetrating poly(acrylic acid) modified poly(vinyl alcohol), PVAAA, membrane. The stability of various PVAAA membranes in water, 2 M CH₃OH, 2 M H₂SO₄, and 40 wt% KOH aqueous media were evaluated. It was found that the stability of PVAAA membrane is stable in 40 wt% KOH solution. The PVAAA membranes were characterized by differential scanning calorimetry, X-ray diffraction, and thermogravimetry analysis. These results show that (1) the crystallinity in PVAAA decreased with increasing the content of poly(acrylic acid) in the PVAAA membranes. (2) The melting point of the PVAAA membrane is reduced with increasing the content of poly(acrylic acid) in the membrane. (3) Three stages of thermal degradation were found for pure PVA. Compared to pure PVA, the temperature of thermal degradation increased for the PVAAA membrane. The various PVAAA membranes were immersed in KOH solution to form polymer electrolyte membranes, PVAAA-KOH, and their performances for alkaline solid polymer electrolyte were conducted. At room temperature, the ionic conductivity increased from 0.044 to 0.312 S/cm. The result was due to the formation of interpenetrating polymer chain of poly(acrylic acid) in the PVAAA membrane and resulting in the increase of charge carriers in the PVA polymer matrix. Compared to the data reported for different membranes by other studies, our PVAAA membrane are highly ionic conducting alkaline solid polymer electrolytes membranes.     

PVA碱性凝胶聚合物电解质薄膜电化学稳定性研究

应用溶解—铸膜法制备聚乙烯醇(polyvinylalcohol,PVA)碱性凝胶聚合物电解质(gelpolymerelectrolyte,GPE)薄膜.交流阻抗(EIS)测试表明,随着KOH含量的增加,该薄膜的离子电导率表现为先增大而后减小的变化趋势,当KOH含量为42%(bymass,下同)时,电导率达到最大值,为2.01×10-3S/cm.X射线衍射(XRD)结果表明,当膜中KOH含量大于20%时,晶态的PVA就逐渐转变为非晶态结构.又当KOH含量增加到一定值后,由于体系中未电离的非晶态KOH量的增多而导致离子电导率下降.循环伏安(CV)和拉曼光谱(Raman)结果表明,该薄膜具有很好的电化学稳定性,可应用于碱性二次电池.     

燃料电池用聚乙烯醇基碱性聚合物电解质膜的制备及其性能

通过在不同浓度KOH溶液中进行掺杂,制备出了聚乙烯醇(PVA)、聚乙烯醇/聚乙烯吡咯烷酮(PVA/PVP)和聚乙烯醇/聚乙二醇二甲醚(PVA/PEGDE)碱性聚合物电解质膜详细考察了膜的外观形貌、微观结构、热稳定性、离子电导率和化学稳定性等.结果表明,PVA与PVP以及PEGDE具有很好的相容性,所制备的复合膜断面致密...     

聚乙烯醇/聚乙烯吡咯烷酮碱性复合膜的制备及其性能

通过在不同浓度KOH溶液中进行掺杂,制备出了聚乙烯醇/聚乙烯吡咯烷酮(PVA/PVP)碱性聚合物电解质膜.详尽考察了膜的组成、微观结构、热稳定性、离子电导率和甲醇吸收率.结果表明,PVA与PVP两者具有较好的相容性,当m(PVA)∶m(PVP)=1∶0.5时,膜断面致密、均匀,未发生大尺度相分离.PVP的混入可以极大提高复合膜的电导率和热稳定性.当m(PVA)∶m(PVP)=1∶1时,复合膜的电导率可达2.01×10-3 S.cm-1.PVA/PVP/KOH膜的甲醇吸收率随温度的升高没有明显变化,100℃时其甲醇吸收率仅为同条件下Nafion 115膜的1/4.这表明该复合膜有望作为一种新型的碱性直接甲醇燃料电池用固体电解质膜且可提高膜的使用温度.     

K2FeO4-Zn碱性固态电解质电池电化学性能研究

应用溶液铸膜法制备出了交联聚乙烯醇(PVA)/聚丙烯酸(PAA)-KOH-H2O复合碱性固态电解质膜, 其厚度为150 µm左右, SEM测试结果表明其表面呈均相的非晶态结构, 交流阻抗(EIS)测试表明室温离子电导率可达3.5×10－2 S• cm－1, 循环伏安(CV)测试表明其电化学稳定窗口为3.5 V左右, 将其应用于一次碱性K2FeO4-Zn电池, 通过研究固态电解质膜在不同浓度KOH碱液中预处理和其在不同放电倍率下的放电性能, 结果表明, 9 mol•L－1为最佳固态电解质膜预处理碱液浓度, 0.4 C为最佳放电倍率, 1.0 V以上容量最高可达222.6 mAh•g－1, 并表现出良好的放电平台特性.     

双(三氟甲基磺酰)亚胺钠基聚合物电解质在固态钠电池中的性能

采用简单的溶液浇铸法制备出由双（三氟甲基磺酰）亚胺钠（NaTFSI）/聚氧乙烯（PEO）构筑的固态聚合物电解质（SPE）,并针对其相转变、结晶性、热稳定性、电导率以及电化学稳定性等基础理化及电化学性质进行了系统表征。结果表明,NaTFSI/PEO（[EO]/[Na⁺]=15）SPE具有相对高的电导率（σ ≈ 10^-3 S·cm^-1,80℃）、高的耐氧化能力（4.86 V vs Na⁺/Na）和热稳定性高达350℃。电池测试结果表明,该NaTFSI基SPE不仅对金属钠电极能够呈现出优异的界面稳定性,而且在Na|SPE|NaCu_1/9Ni_2/9Fe_1/3Mn_1/3O₂电池中展现出良好的循环和倍率性能。     

Preparation of P(AN–MMA) microporous membrane for Li-ion batteries by phase inversion

A novel process was proposed for preparation of microporous poly(acrylonitrile–methyl methacrylate) (P(AN–MMA)) membranes by phase inversion techniques using ultrasonic humidifier. Being prepared by dissolving the polymer (PAN–MMA) in the N,N-dimethylformamide (DMF) solution with mechanical stirring, the homogenous casting solution was cast onto a clean glass plate. Successively, the glass plate was exposed to the water vapor produced by ultrasonic humidifier, inducing the phase inversion. It is found the pore size is much more uniform across the cross-section of the membrane than that of the porous membrane prepared by conventional water bath coagulation technique. The microporous membranes were directly obtained after the washing and drying. It had about 1–5 μm of pores and presented an ionic conductivity of 2.52 × 10⁻³ S/cm at room temperature when gelled with 1 M LiPF₆/EC-DMC (1:1 vol.%) electrolyte solution. The test cells with the gel electrolytes prepared from as-prepared microporous membranes showed stable cycling capacities, indicating that the microporous membrane, which was prepared from cheap starting materials acrylonitrile and methyl methacrylate, can be used for the gel electrolyte of lithium batteries.     

高稳定性化学交联聚乙烯醇/聚乙烯吡咯烷酮碱性固体电解质膜

碱性固体电解质膜的稳定性是影响其在电化学领域应用的一个重要因素.本文在前期研究工作的基础上,通过直接共混和化学交联修饰制备出了聚乙烯醇/聚乙烯吡咯烷酮(PVA/PVP)碱性聚合物电解质膜.采用傅里叶变换红外(FTIR)光谱、热重分析(TGA)、扫描电镜(SEM)和交流阻抗等方法详细考察了复合膜的分子结构、热稳定性、化学稳定性、氧化稳定性和尺寸稳定性.红外光谱结果表明,PVP成功地混入聚合物基体中,在1672cm-1处表现出来自于PVP第I带C襒O的强吸收峰.TGA结果表明,提高掺杂的KOH溶液浓度对PVA/PVP碱性膜的热稳定性没有明显影响.SEM分析结果表明,复合膜经高温、高浓度碱(80℃,10mol·L-1)处理后,其断面结构仍致密均匀,未出现类似小孔等膜降解情况,此时膜电导率(1.58×10-3S·cm-1)相比室温相同碱液时提高91.5%,表明PVA/PVP膜具有很好的耐碱化学稳定性.同时,PVA/PVP碱性膜表现出良好的抗氧化性,在60℃的3%和10%H2O2溶液中处理均没有观察到明显的质量损失,150h后仍能保持原膜质量的89%和85%.此外,由于膜内形成致密的内互交联网络结构,复合膜在水中800h之后也表现出很好的同向性和电导率稳定性.     

一种高电导率PVA聚合物电解质的制备与表征

A type of polymer-in-salt electrolyte composed of poly( vinyl alcohol), KOH and water was prepared by a solution casting method. X-ray diffraction proves that the high concentration of KOH in the electrolyte is in an amorphous state. The ionic conductivities of the PVA-KOH-H2O electrolytes increased as the concentration of KOH increased, and the alkaline electrolyte with PVA/KOH 1/3 (mass ratio) exhibited the highest ionic conductivity of 0. 15 S/cm at room temperature, as measured by electrochemical impedance spectroscopy. The temperature dependence of the conductivity is found to be in agreement with the Arrhenius equation. The potential stability window at the metal/electrolyte interface was of 1.4 V for the nickel electrode determined by cyclic voltammetry.     

A new composite polymer electrolyte based on poly(ethyleneoxide)/ polysiloxane/BMImTFSI/organomontmorillonite

Composite polymer electrolytes based on poly(ethylene oxide)-polysiloxane/l-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide/organomontmorillonite(PEO-PDMS/1L/OMMT) were prepared and characterized.Addition of both an ionic liquid and OMMT to the polymer base of PEO-PDMS resulted in an increase in ionic conductivity.At room temperature,the ionic conductivity of sample PPB100-OMMT4 was 2.19×10~3 S/cm.The composite polymer electrolyte also exhibited high thermal and electrochemical stability and may potentially be applied in lithium batteries.     

用于燃料电池的季铵基团的PVA/PAADDA碱性聚合物电解质膜的制备及稳定性

通过聚合物共混法成功地制备出了具有化学交联结构的聚乙烯醇/二甲基二烯丙基氯化铵和丙烯酰胺共聚物(PVA/PAADDA)碱性聚合物电解质膜。采用傅里叶红外分析（FTIR）、扫描电镜（SEM）、热重分析（TGA）和交流阻抗等方法详细考察了PVA/PAADDA膜的分子结构、微观形貌、热稳定性、耐碱稳定性、尺寸稳定性和电导率。红外分析结果表明,PAADDA成功地混入聚合物基体中。SEM分析结果表明,当m(PVA):m(PAADDA)=1:1时,膜可观察到明显的微相分离。TGA结果表明,混入PAADDA后膜的热稳定性没有明显降低,并且在210 oC之前能保持很好的热稳定性。PVA/PAADDA膜在经过高温、高浓度碱溶液（80 oC, 6 mol?L-1）处理后,仍表现出很好的耐碱稳定性。同时,由于膜内形成致密的内互交联网络结构,PVA/PAADDA膜在60 oC水中处理300 h后也能表现出优良的尺寸稳定性和电导率稳定性。此外,膜的甲醇吸收率随着温度的升高没有明显变化,90 oC时甲醇吸收率仅为同条件下Nafion115膜的1/5。     

基于聚碳酸丙烯酯基聚合物电解质和有机正极的全固态钠电池

Sodium-ion batteries (SIBs) are promising candidates to replace lithium-ion batteries (LIBs) to meet the emergent requirements of various commercial applications. SIBs and LIBs are similar in many aspects, including their reduction potentials, approximate energy densities, and ionic semidiameters. Analogously, safety issues, including liquid leakage, high flammability, and explosiveness limit the usage of SIBs. All-solid-state batteries have the potential to solve the aforementioned problems. However, polycarbonates as promising solid electrolytes have been rarely exploited in all-solid-state SIBs. In addition, organic electrode materials, including non-conjugated redox polymers, carbonyl compounds, organosulfur compounds, and layered compounds, have been intensively investigated as part of various energy storage systems owing to their low cost, environmental friendliness, high energy density, and structural diversity. Nevertheless, the dissolution of small organic compounds in organic-liquid electrolytes has hindered its further applications. Fortunately, the utilization of solid polymer electrolytes combined with organic electrode materials is a promising method to prevent dissolution into the electrolyte and improve the cycling performance of SIBs. Thus, we proposed the utilization of a poly(propylene carbonate) (PPC)-based solid polymer electrolyte and cellulose nonwoven with a 3, 4, 9, 10-perylene-tetracarboxylicacid-dianhydride (PTCDA) cathode in an all-solid-state sodium battery (ASSS). The solid electrolyte significantly enhanced the safety of the SIB and was successfully synthesized via a facile method. The morphology of the as-prepared solid electrolyte was examined by electron scanning microscopy (SEM). Furthermore, the electrochemical performances of the PTCDA/Na battery with organic-liquid and solid electrolytes at room temperature were compared. The SEM results demonstrated that the solid polymer electrolyte and sodium bis(fluorosulfonyl)imide (NaFSI) were evenly distributed inside the pores of the nonwoven cellulose. The ionic conductivity of the composite solid polymer electrolyte (CSPE) at room temperature was 3.01 × 10^-5 S·cm^-1, suggesting that the CSPE was a promising candidate for commercial applications. In addition, the ASSS showed significantly improved cycling performance at a current density of 50 mAh·g^-1 with a high capacity retention of 99.1%, whereas the discharge capacity of the liquid PTCDA/Na battery was only 24.6mAh·g^-1 after 50 cycles. This indicated that the cycling performance of the PTCDA cathode in the SIB was largely improved by preventing the dissolution of the PTCDA cathode material in the electrolyte. Electrochemical impedance spectroscopy results demonstrated that the CSPE was compatible with the organic cathode electrode.     

增塑剂对PVA碱性聚合物电解质电化学性能的影响

通过溶解―铸膜法制备聚乙烯醇(PVA)-KOH-H2O碱性聚合物电解质膜。向聚合物中添加增塑剂丙三醇(GROL)和碳酸丙烯酯(PC)来提高离子电导率。X射线晶体衍射分析(XRD)结果表明,添加增塑剂未改变聚合物的物相结构,薄膜仍主要为不定形态。差示扫描热分析(DSC)结果显示,添加增塑剂后聚合物电解质膜的玻璃化转变温度降低,促进了电解质膜向不定形态转变。电解质膜室温离子电导率随增塑剂添加而增大,增塑剂超过一定量后离子电导率开始下降。PC对提高离子电导率的作用优于GROL。循环伏安测试结果显示,电解质膜的电化学稳定性窗口随增塑剂的添加而有所变窄,但仍显示了较好的电化学稳定性。     

Infrared and Raman spectra, conformational stability, ab initio calculations of structure, and vibrational assignment of 2-hexyne

The infrared spectra (3500–50 cm⁻¹) of the gas and solid and the Raman spectra (3500–50 cm⁻¹) of the liquid and solid have been recorded for 2-hexyne, CH₃–CC–CH₂CH₂CH₃. Variable temperature studies of the infrared spectrum (3500–400 cm⁻¹) of 2-hexyne dissolved in liquid krypton have also been recorded. Utilizing four anti/gauche conformer pairs, the anti(trans) conformer is found to be the lower energy form with an enthalpy difference of 74±8 cm⁻¹ (0.88±0.10 kJ/mol) determined from krypton solutions over the temperature range −105 to −150 °C. At room temperature it is estimated that there is 42% of the anti conformer present. Equilibrium geometries and energies of the two conformers have been determined by ab initio (HF and MP2) and hybrid DFT (B3LYP) methods using a number of basis sets. Only the HF and DFT methods predict the anti conformer as the more stable form as found experimentally. A vibrational assignment is proposed based on the force constants, relative intensities, depolarization ratios from the ab initio and DFT calculations and on rotational band contours obtained using the calculated equilibrium geometries. From calculated energies it is shown that the CH₃ group exhibits almost completely free rotation which is in agreement with the observation of sub-band structure for the degenerate methyl vibrations from which values of the Coriolis coupling constants, ζ, have been determined. The results are compared to similar properties of some corresponding molecules.     

基于一体化正极与电解质膜的高性能固态电池

Lithium ion batteries (LIBs) are becoming the most popular energy storage systems in our society. However, frequently occurring accidents of electrical cars powered by LIBs have caused increased safety concern regarding LIBs. Solid-state lithium batteries (SSLBs) are believed to be the most promising next generation energy storage system due to their better in-built safety mechanisms than LIBs using flammable organic liquid electrolyte. However, constructing the ionic conducting path in SSLBs is challenging due to the slow ionic diffusion of Li ion in solid-state electrolyte, particularly in the case of solid-solid contact between the solid materials. In this paper, we demonstrate the construction of an integrated electrolyte and cathode for use in SSLBs. An integrated electrolyte and cathode membrane is obtained via simultaneous electrospinning and electrospraying of a polyacrylonitrile (PAN) electrolyte and a LiFePO₄ (LFP) cathode material respectively, for the cathode layer, followed by the electrospinning of PAN to prepare the electrolyte layer. The resultant integrated PAN-LFP membrane is flexible. Scanning electron microscopy and energy dispersive X-ray spectroscopy measurement results show that the electrode and electrolyte are in close contact with each other. After the integrated PAN-LFP membrane is filled with a succinonitrile-bistrifluoromethanesulfonimide (SN-LiTFSI) salt mixture, it is paired with a lithium foil metal anode electrode, and the resultant solid-state Li|PAN-LFP cell exhibits limited polarization and outstanding interfacial stability during long term cycling. That is, the Li|PAN-LFP cell presents a specific capacity of 160.8 mAh∙g⁻¹ at 0.1C, and 81% of the initial capacity is maintained after 500 cycles at 0.2C. The solid-state Li|PAN-LFP cell also exhibits excellent resilience in destructive tests such as cell bending and cutting.     

聚苯并咪唑-锂盐-聚乙二醇单甲醚共混全固态聚合物电解质的制备及性能

使用共混后浇铸成膜的方法,制备了聚苯并咪唑-锂盐-聚乙二醇单甲醚组成的锂离子电池共混全固态聚合物电解质。通过傅里叶红外光谱(FT-IR)、X射线衍射(XRD)、差示扫描量热(DSC)、拉伸与交流阻抗测试表征了共混全固态电解质的结构与性能。研究了不同锂盐以及各组分含量对共混全固态电解质的力学性能与电导率的影响。结果表明:聚苯并咪唑与聚乙二醇单甲醚之间存在氢键;共混全固态电解质中聚乙二醇单甲醚处于无定形态;锂盐的加入使聚乙二醇单甲醚的玻璃化转变温度下降;聚乙二醇单甲醚含量越高,共混膜强度越低,电导率越高,并且使用三氟甲磺酸锂作为锂盐时其电导率最高,室温下可以达到3.58×10~(-5) S/cm,高温下可以达到3.3×10~(-3) S/cm,高温下满足对锂离子电池的使用需求。     

CIDEP studies of a radical pair produced upon excitation of the molecular complex of acridine and acridan in the solid state at room temperature

The time-resolved ESR signal of a triplet radical pair was detected upon excitation of a solid mixture of acridine and acridan at room temperature. The ZFS parameters of the triplet radical pair were determined to be D=−0.0100 cm⁻¹ and E=0.00053 cm⁻¹. The structure of the radical pair is discussed on the basis of the data.     

Novel zinc ion conducting polymer gel electrolytes based on ionic liquids

We report novel zinc ion conducting polymer gel electrolytes (PGEs) based on non-volatile room temperature ionic liquids. The PGEs consist of an ionic liquid, with a zinc salt dissolved in it, blended with a polymer matrix, poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP). The resultant electrolyte membranes are freestanding, translucent, flexible and elastic, with excellent mechanical integrity and strength. They possess exceptional thermal stability, exhibit essentially no weight loss under dynamic vacuum or upon heating to 200 °C, and remain the same gel phase in wide temperature ranges, with ionic conductivities on the order of 10⁻³ S/cm at room temperature, 10⁻⁴ S/cm at −20 °C and 4–5 × 10⁻³ S/cm at 80 °C. Electrochemical tests show that zinc ions are mobile in the membranes and zinc metal is capable of dissolution into and deposition from the membranes. The membranes also exhibit wide electrochemical stability windows. The results of this study demonstrate the promise of developing PGEs based on ionic liquids for potential application in next-generation non-aqueous zinc battery systems.     

Poly(vinyl alcohol)/poly(methyl methacrylate) blend membranes for pervaporation separation of water + isopropanol and water + 1,4-dioxane mixtures

Pervaporation (PV) separation of water + isopropanol and water + 1,4-dioxane mixtures has been attempted using the blend membranes of poly(vinyl alcohol) (PVA) with 5 wt.% of poly(methyl methacrylate) (PMMA). These results have been compared with the plain PVA membrane. Both plain PVA and PVA/PMMA blend membranes have been crosslinked with glutaraldehyde in an acidic medium. The membranes were characterized by differential scanning calorimetry and universal testing machine. Pervaporation separation experiments have been performed at 30 °C for 10, 15, 20, 30 and 40 wt.% of feed water mixtures containing isopropanol as well as 1,4-dioxane. PVA/PMMA blend membrane has shown a selectivity of 400 for 10 wt.% of water in water + isopropanol feed, while for water + 1,4-dioxane feed mixture, membrane selectivity to water was 104 at 30 °C. For both the feed mixtures, selectivity for the blend membrane was higher than that observed for plain PVA membrane, but flux of the blend membrane was lower than that observed for the plain PVA membrane. Membranes of this study are able to remove as much as 98 wt.% of water from the feed mixtures of water + isopropanol, while 92 wt.% of water was removed from water + 1,4-dioxane feed mixtures at 30 °C. Flux of water increased for both the feed mixtures, while the selectivity decreased at higher feed water concentrations. The same trends were observed at 40 and 50 °C for 10, 15 and 20 wt.% of water mixtures containing isopropanol as well as 1,4-dioxane feed mixtures, which also covered their azeotropic composition ranges. Membrane performance was studied by calculating flux (J_p), selectivity (), pervaporation separation index (PSI) and enrichment factor (β). Permeation flux followed the Arrhenius trend over the range of temperatures investigated. It was found that by introducing a hydrophobic PMMA polymer into a hydrophilic PVA, the selectivity increased dramatically, while flux decreased compared to plain PVA, due to a loss in PVA chain relaxation.     

基于局部高盐界面润湿策略构筑的固态金属锂软包电池

固态金属锂电池因其优异的安全性和高的理论能量密度被认为是最具前景的下一代储能电池体系之一。随着以硫化物为代表的高离子导率电解质被逐渐开发,金属锂与固态电解质界面成为限制固态电池应用的主要瓶颈。金属锂/电解质的固固界面存在着界面接触差、界面电荷传输阻力高等问题。本文以固态金属锂软包电池为研究对象,通过由1,1,2,2-四氟乙基-2,2,3,3-四氟丙基醚、乙二醇二甲醚与双三氟磺酰亚胺锂组成的局部高盐液态电解液(HFE-DME LiTFSI)对金属锂/固态电解质界面进行润湿,增加金属锂与固态电解质之间的离子接触,降低离子传输阻力,从而提高锂离子在界面的传输能力。在30 mm×30 mm Li|Li4Ti5O12(LTO)固态软包电池中,通过3.0μL·cm^?2 HFE-DME LiTFSI局部高盐液态电解液润湿金属锂与固态电解质界面,软包电池的界面电阻从4366Ω·cm^?2降低到了64Ω·cm^?2。在0.1C与0.5C倍率下,LTO的放电比容量分别达到107与96 mAh·g^?1。同时,Li-S固态软包电池在0.01C及0.02C下,比容量也达到了1100与932 mAh·g^?1。