Mass spectrometric analysis of 7-sulfoxymethyl-12-methylbenz[a]anthracene and related electrophilic polycyclic aromatic hydrocarbon metabolites

The Meso-region theory of polycyclic aromatic hydrocarbon (PAH) carcinogenesis predicts that the development of pronounced carcinogenicity depends on the introduction of a good leaving group on alkyl side-chains attached to the exceptionally reactive meso-anthracenic or L-region positions of PAHs. Thus, the first step in carcinogenesis by methylated PAHs such as 7,12-dimethylbenz[a]anthracene (DMBA) would be the hydroxylation of the L-region methyl groups, particularly the 7-methyl group. The second would be the formation of a metabolite, e.g. a sulfate ester, which is expected to be a good leaving group capable of generating a highly reactive benzylic carbocation. 7-Hydroxymethyl-12-methylbenz[a]anthracene (7-HMBA) is a metabolite of DMBA, and sulfation of 7-HMBA to a 7-sulfoxymethyl metabolite (7-SMBA) is a known Phase II metabolic process designed to facilitate excretion, but actually enabling more destructive side-reactions. These side-reactions occur with generation of an electrophilic 7-methylene carbonium ion, and/or by in vivo halide exchange to provide neutral side-products more capable of entering cells, especially those of DMBA target tissues. Electrospray ionization mass spectrometry (MS) enabled us to visualize 7-SMBA as an intact m/z 351 conjugate anion by negative mode, and as a released m/z 255 carbonium ion by positive mode. Upon prolonged refrigeration, 7-SMBA accumulated an m/z 383 photooxide, which appeared capable of re-evolving the starting material as visualized by tandem quadrupole MS, or MS/MS. The 7-SMBA carbonium ion provided interpretable fragments when studied by fragment ion MS/MS, including those representing the loss of up to several protons. Subtle differences in this property were encountered upon perturbing 7-SMBA, either by warming it at 37 degrees C for 2 h or by substituting the initial sulfoxy group with an iodo group. Side-reactions accounting for such proton losses are proposed, and are of interest whether they occur in the mass spectrometer, in solution or both; these proposals include acidity at the 12-methyl position and cyclization between the 12-methyl group and the adjacent C-1 position. It is also suggested that such side-reactions may comprise one route to relieving steric strain arising between the 12-methyl group and the angular benzo ring of 7-SMBA.     

Analysis of intermediates from polycyclic aromatic hydrocarbon biodegradation

A major difficulty in assessing bioremediation in hydrocarbon impacted field sites is the determination of the extent and products of contaminant biodegradation. Previously, various analytical techniques, including mass spectrometry and chromatography, have been used to characterize components in mixtures resulting from biodegradation. In this work, the applicability of capillary electrophoresis (CE) to this area of research is demonstrated. CE methods were optimized for analysis of compounds that are known metabolites of polycyclic aromatic hydrocarbon (PAH) biodegradation.     

Differential scanning calorimetry to measure the purity of polycyclic aromatic hydrocarbons

The application of differential scanning calorimetry (DSC) for purity determination is well documented in literature and is used amongst others in the analysis of pure organic crystalline compounds. The aim of this work is to examine whether the DSC method for purity determination consistently produces values for the purity of polycyclic aromatic hydrocarbons (PAHs) which are sufficiently accurate as required for the certification of reference materials. For this purpose, 34 different existing PAH certified reference materials were tested. The DSC results are shown to be consistent with the results obtained by other methods assessing the organic impurities content in PAHs, like gas chromatography (GC), high performance liquid chromatography (HPLC) and mass spectrometry. Significant differences between the measured values and the certified purity values were observed only in a limited number of cases.     

多环芳烃指纹用于渤海采油平台原油的鉴别

采用气相色谱/质谱方法,对渤海海上4个不同区块、5个平台的6口油井原油进行了烷基化多环芳烃系列化合物和美国环保署（EPA）优先控制多环芳烃系列化合物的准确定性定量分析。通过多环芳烃原始指纹谱图、多环芳烃组分分布模式和特征比值的比较对上述原油进行鉴别。结果证明不同区块的原油中多环芳烃指纹信息不尽相同,即使在同一平台不同油井中所产的原油其指纹也存在一定差异。为确保原油鉴别的准确性,分析过程中必须在仪器的稳定性和样品前处理方面实施严格的质量控制措施。     

Solid-phase extraction and purification for the quantification of polycyclic aromatic hydrocarbon metabolites in fish bile

An analytical protocol including solid-phase extraction and purification is described for the individual quantification of polycyclic aromatic hydrocarbon metabolites (hydroxylated PAHs) in liquid biological matrices such as plasma and bile. The method consists in an enzymatic deconjugation followed by a solid-phase extraction on a C₁₈ cartridge and by a cleanup on an NH₂ cartridge. Extracts are then submitted to a derivatization step before gas chromatography/mass spectrometry (GC/MS) analysis. The quantification of PAH metabolites is ensured by adding an internal standard, 1-hydroxypyrene deuterated, at the beginning of the protocol. Recoveries obtained for the entire protocol were for the major part of the compounds between 96 and 70%. However, recoveries were not so satisfying concerning 2-hydroxybiphenyl and especially 3-hydroxybenzo(a)pyrene, with 62 and 36% respectively. Finally, the protocol was applied to different fish bile samples and showed its good applicability to fish bile samples. The NH₂ cleanup step has been proved to be a very selective purification step, necessary to remove most of the bile pigments before GC/MS injection. Different PAH metabolites could be detected in those natural samples and their quantification allowed us to distinguish different levels of fish exposure.     

Adsorption of polycyclic aromatic hydrocarbons onto graphyne: Comparisons with graphene

Density functional theory calculations were implemented to expand the knowledge about graphyne and its interaction with polycyclic aromatic hydrocarbons (PAHs). Due to the porous character of graphyne, the adsorption strength of PAHs onto graphyne surfaces is expected to be lower with respect to graphene (a perfect π‐extended system). However, there are not quantitative evidences for this assumption. This work shows that the adsorption strength of adsorbed PAHs onto γ‐graphyne nanosheets (GY) is weakened in 12 ? 23% with respect to the adsorption onto graphene, with a decrease of 10 ? 20% in the dispersive interactions. The adsorption energies (in eV) of the GY–PAH systems can be straightforward obtained as E _ads/eV≈0.033N _H + 0.031N _C, where N _H and N _C is the number of H and C atoms in the aromatic molecule, respectively. This equation predicts the binding energy of graphene–graphyne bilayers with a value of ～31 meV/atom. Analysis of the electronic properties shows that PAHs behaves as n‐dopants for GY, introducing electrons in GY and also reducing its bandgap in up to ～0.5 eV. Strong acceptor or donor substituted PAHs decrease the bandgap of γ‐graphyne in up to ～0.8 eV, with changes in its valence or conduction band, depending on the chemical nature of the adsorbate. Finally, these data will serve for future studies related to the bandgap engineering of graphyne surfaces by nonaggressive molecular doping, and for the development of graphyne‐based materials with potential applications in the removal of persistent aromatic pollutants.     

Oxidation of polycyclic aromatic hydrocarbons catalyzed by soybean peroxidase

Soybean peroxidase (SBP) catalyzes the oxidation of a variety of polycyclic aromatic hydrocarbons (PAHs) in the presence of water-miscible organic cosolvents, including acetonitrile, tetrahydrofuran, and dimethylformamide (DMF). Oxidation was optimal at pH 2.0–2.5, with substantially lower reactivity at pH 1.5 as well as at pH > 3.0. Despite the low pH activity optimum, SBP had an observed half-life of 120 h at pH 2.5. Conversions of greater than 90% were observed with anthracene and 9-methylanthracene in the presence of 50% (v/v) DMF. Anthracene oxidation yielded exclusively anthraquinone, thereby demonstrating that SBP catalyzes a formal six-electron oxidation of the unactivated aromatic substrate to the quinone. A mechanism is proposed to account for this reaction that includes the initial one-electron oxidation of the PAH followed by addition of water to the oxidized PAH. 9-Methylanthracene was more reactive than anthracene, and its enzymatic oxidation yielded two products: anthraquinone and 9-methanol-9,10-dihydroanthracene. The former product indicates that loss of the methyl group occurs during enzymatic oxidation. These results suggest that SBP could be useful in the conversion of PAHs into more environmentally benign materials.     

Effects of spin contamination on estimating bond dissociation energies of polycyclic aromatic hydrocarbons

The objective of this work is to investigate the impact of spin contamination on the prediction of the enthalpies of formation of Polycyclic Aromatic Hydrocarbon (PAH) radicals and of the bond dissociation energies of their precursor molecule. These PAH radicals play a major role in the mass growth of soot precursors leading ultimately to the first soot particles. In this work, we highlights the errors due to spin contamination by comparing spin‐unrestricted open‐shell calculations (UHF, UMP2, and Quadratic CI singles and doubles [QCISD(T)]) with spin‐restricted open‐shell calculations (ROHF, ROMP2, and ROCCSD(T)). The results suggest that one should be very careful using any of the spin‐unrestricted methods (even QCISD (T)) unless the values are extremely close to the theoretical value. Following these observations, we propose a new set of best‐estimates for the enthalpies of formation of these critical PAH radicals using spin‐restricted open‐shell ROMP2 and RCCSD(T) calculations. © 2015 Wiley Periodicals, Inc.     

Magnetic graphene oxide as adsorbent for the determination of polycyclic aromatic hydrocarbon metabolites in human urine

Detection of monohydroxy polycyclic aromatic hydrocarbons metabolites in urine is an advisable and valid method to assess human environmental exposure to polycyclic aromatic hydrocarbons. In this work, novel Fe₃O₄/graphene oxide composites were prepared and their application in the magnetic solid‐phase extraction of monohydroxy polycyclic aromatic hydrocarbons in urine was investigated by coupling with liquid chromatography and mass spectrometry. In the hybrid material, superparamagnetic Fe₃O₄ nanoparticles provide fast separation to simplify the analytical process and graphene oxide provides a large functional surface for the adsorption. The prepared magnetic nanocomposites were characterized by X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, and vibrating sample magnetometry. The experimental conditions were optimized systematically. Under the optimal conditions, the recoveries of these compounds were in the range of 98.3–125.2%, the relative standard deviations ranged between 6.8 and 15.5%, and the limits of detection were in the range of 0.01–0.15 ng/mL. The simple, quick, and affordable method was successfully used in the analysis of human urinary monohydroxy polycyclic aromatic hydrocarbons in two different cities. The results indicated that the monohydroxy polycyclic aromatic hydrocarbons level in human urine can provide useful information for environmental exposure to polycyclic aromatic hydrocarbons.     

HPLC analysis of the large polycyclic aromatic hydrocarbons in a diesel particulate

Summary High performace liquid chromatography (HPLC) was used to separate the large polycyclic aromatic hydrocarbons in a diesel particulate extract. Identification of individual peaks was made using a photodiode array UV/visible detector to collect their absorbance spectra. Comparisons between standard compounds and the peaks were made using both retention times and spectra. Compounds of up to 10 rings were identified.     

Synthesis and structures of helical polycyclic aromatic hydrocarbons bearing aryl substituents at the most sterically hindered positions

A three-step synthetic sequence starting from condensation between a benzannulated enediyne and an aryl tert-butyl ketone was established to provide easy access to angularly fused polycyclic aromatic hydrocarbons bearing one or two aryl substituents at the most sterically hindered positions to cause helical twists. The dynamic behaviors involving the helix inversion and the restricted rotation of the aryl substituents were investigated by temperature-dependent NMR studies. The X-ray structure of an indeno-fused 1-phenylpentahelicene derivative showed severe distortion of the [5]helicene system from planarity.     

Theoretical study concerning the reactivity of imine derivatives of polycyclic aromatic hydrocarbons

The opening reaction of N-protonated polycyclic aromatic hydrocarbon imines has been computed by means of ab initio, density functional, and semiempirical methods of calculation. Imines are predicted to be more stable than the corresponding O-protonated derivatives, epoxides and diol epoxides. On the other hand, the activated N-methanesulfonylbenzene imine presented more favorable DeltaE( not equal ) and DeltaE(r) for ring opening due to the effect of hydrogen-bond interactions. Anti and syn trans-diol benzene imines did not show a different behavior from the unsubstituted imine. According to these calculations, bay-region, fjord-region, and bay-region methyl-substituted compounds opened more easily among the imine derivatives, following the same reactivity pattern as the oxygen analogs. The exothermicity of the opening process correlated with the charge delocalization in the resulting carbocation.     

气相色谱-质谱法测定热塑性弹性体中的多环芳烃

建立了一种简单、准确的测定热塑性弹性体中16种多环芳烃(PAHs)的气相色谱-质谱(GC-MS)方法。考察了样品制备、萃取溶剂、萃取方法、时间以及温度对厂家制备的阳性热塑性弹性体样品中PAHs提取效率的影响,确定了萃取条件和方法。样品经甲苯超声萃取、浓缩后用环己烷溶解、二甲亚砜液液萃取净化后采用GC-MS进行分析,内标法定量。通过对不同材质阳性热塑性弹性体样品的加标回收、精密度试验等对建立的方法进行评价,16种PAHs的平均回收率为70%～117%,精密度为0.2%～10.8%。该方法适合于热塑性弹性体中PAHs的测定。     

Ultrasound-assisted solvent extraction of total polycyclic aromatic hydrocarbons from mussels followed by spectrofluorimetric determination

An ultrasound-assisted solvent extraction procedure has been optimised to speed up total polycyclic aromatic hydrocarbons (T-PAHs) extraction from mussel soft tissue. The T-PAHs releases have been evaluated by spectrofluorimetry (excitation and fluorescence emission wavelengths of 300 and 382 nm, respectively, and using chrysene as calibrant). Variables such as sonication time, ultrasound frequency, n-hexane volume, dichloromethane volume, number of repeated extractions with n-hexane and number of repeated extraction with dichloromethane were simultaneously studied by applying a Plackett-Burman design (PBD) approach. Results showed that ultrasound frequency and n-hexane and dichloromethane volumes were statistically significant variables (confidence interval of 95%). These last two variables were finally optimised by using central composite designs (CCD), yielding optimum n-hexane and dichloromethane volumes of 2.5 and 6.5 ml, respectively. The lowest T-PAHs releasing at high ultrasound frequency (35 kHz) led to choice the lowest ultrasound frequency (17 kHz) to perform the extraction. Variables such as sonication time and number of repeated extraction with n-hexane or dichloromethane were statistically non-significant and they were fixed at 10 min and the extraction with n-hexane and dichloromethane were performed once. The limit of detection was 0.021 μg g⁻¹ (referred to dried mass), the repeatability of the overall method was 4.7% (n = 9) and the analytical recoveries were between 98 and 105%. The proposed method was finally applied to 16 mussel samples (Mytilus galloprovincialis) from Ría de Arousa estuary (Galicia, northwest Spain).     

[Hmim]PF6 enhanced the extraction of polycyclic aromatic hydrocarbons from soil with the QuEChERS method

To detect, identify, and quantify the polycyclic aromatic hydrocarbons (PAHs) released into the environment, the PAHs need to be isolated from the soil matrix. In this work, a modified quick, easy, cheap, efficient, rugged and safe (QuEChERS) method with ionic liquid was combined with liquid chromatography to identify 16 selected PAHs in soil. Ionic liquid 1-hexyl-3-methylimidazolium hexafluorophosphate ([Hmim]PF₆) was applied as an extractant component to enhance the process. The [Hmim]PF₆ content in acetonitrile (ACN) was optimized. The [Hmim]PF₆ modified QuEChERS method has the advantages defined by its name and a similar recovery to other extraction methods reported in the literature. Adding [Hmim]PF₆ may eliminate the co-extract proportion and achieve a more effective extraction. Compared with ACN alone, the matrix effect (ME) of ACN containing 5% [Hmim]PF₆ was reduced by approximately 35%. Additionally, the ME of using ACN containing [Hmim]PF₆ without a clean-up procedure was similar to that of using ACN followed by a clean-up procedure. The recoveries of the QuEChERS method implemented with [Hmim]PF₆ ranged from 75.19% to 100.98%. The limits of detection (LOD) and limits of quantification (LOQ) ranged from 0.86 to 4.51 µg/kg and from 2.87 to 15.13 µg/kg, respectively.     

Simultaneous determination of urinary hydroxylated metabolites of naphthalene, fluorene, phenanthrene, fluoranthene and pyrene as multiple biomarkers of exposure to polycyclic aromatic hydrocarbons

A method is presented for determining monohydroxy polycyclic aromatic hydrocarbons (OHPAHs) having 2-, 3- and 4-rings in human urine by using high-performance liquid chromatography with fluorescence detection. A urine sample containing conjugates of OHPAHs was hydrolysed in the presence of beta-glucuronidase/aryl sulfatase and the solution was cleaned up with a solid-phase extraction (C(18) and silica). Eight OHPAHs, namely 1- and 2-hydroxynaphthalenes, 2-hydroxyfluorene, 2-, 3- and 4-hydroxyphenanthrenes, 3-hydroxyfluoranthene and 1-hydroxypyrene, were separated and 1- and 9-hydroxyphenanthrenes co-eluted on an alkylamide-type reversed-phase column with fluorimetric detection. The urinary concentrations of OHPAHs were quantified by using deuterated 1-hydoxypyrene as an internal standard. The method showed good repeatability for inter- and intra-day precisions as well as good linearity of calibration curves (r (2) ranged from 0.996 to 0.999). The limits of detection (S/N=3) were in the range from 2.3 fmol to 2.2 pmol per injection. This method was successfully applied to urine samples from non-smoking taxi drivers, traffic policemen and rural villagers of Chiang Mai, Thailand. The results showed higher urinary concentrations of OHPAHs in rural villagers, consistent with higher respiratory exposure to PAHs.     

On a possible growth mechanism for polycyclic aromatic hydrocarbon di-cations: C(7)H(6)(2+) + C(2)H(2)

The mechanism of the bond-forming reaction between C(7)H(6) (2+) and C(2)H(2) to yield C(9) entities has been investigated by density functional theory calculations with close comparison with experimental data. It is shown that the reaction produces the C(9)H(6) (2+) and C(9)H(7) (2+) di-cations with geometries most probably derived from the indene skeleton. In comparison, the formation of linear structures of di-cations is much more energy-demanding and therefore appears improbable.     

Quantification of 13 priority polycyclic aromatic hydrocarbons in human urine by headspace solid-phase microextraction gas chromatography-isotope dilution mass spectrometry

Polycyclic aromatic hydrocarbons (PAHs) are common environmental pollutants in both living and working environments. The aim of this study was the development of a headspace solid-phase microextraction gas chromatography-isotope dilution mass spectrometry (HS-SPME/GC-IDMS) method for the simultaneous quantification of 13 PAHs in urine samples. Different parameters affecting PAHs extraction by HS-SPME were considered and optimized: type/thickness of fiber coatings, extraction temperature/time, desorption temperature/time, ionic strength and sample agitation. The stability of spiked PAHs solutions and of real urine samples stored up to 90 days in containers of different materials was evaluated. In the optimized method, analytes were absorbed for 60 min at 80 °C in the sample headspace with a 100 μm polydimethylsiloxane fiber. The method is very specific, with linear range from the limit of quantification to 8.67 × 10³ ng L⁻¹, a within-run precision of <20% and a between-run precision of <20% for 2-, 3- and 4-ring compounds and of <30% for 5-ring compounds, trueness within 20% of the spiked concentration, and limit of quantification in the 2.28-2.28 × 10¹ ng L⁻¹ range. An application of the proposed method using 15 urine samples from subjects exposed to PAHs at different environmental levels is shown.