金属皂的晶体结构

钠、钾以外金属的高级脂肪酸盐通称金属皂。它们兼具金属盐和脂肪酸的特性,在工业上广泛用作为塑料助剂(热稳定剂、润滑剂等)、油漆催干剂、增稠剂、防水剂、脱模剂,爽滑剂等[1]。金属皂的许多特性随脂肪链长度和金属种类的不同而变化。稀土、碱土和锌、镉、铅等金属皂是重要的PVC热稳定剂和润滑剂[2,3]。前文[4,5]已报道了稀土金属皂结构的红外光谱和X 射线衍射谱,本文报道镁、钙、锶、钡、锌、镉、铅与棕榈酸、肉豆蔻酸、月桂酸、癸酸锌、辛酸形成金属皂结构的X 射线衍射谱。1　实验部分1 1　金属皂合成采用复分解法[1]合成,产物均…     

N^2（p—甲基苯磺酰）—L—谷氨酰胺的晶体结构测定

谷氨酰胺衍生物抗瘤酮A_(10)(3-苯乙酰胺基-2,6-哌啶二酮)是从人尿、血液中分离出来的天然广谱性抗肿瘤活性化合物,无明显毒副作用,目前正进行Ⅱ期临床研究.其抗肿瘤的有效成分被认为是它的2个水解产物苯乙酰谷氨酰胶和苯乙酰异谷氨酰胺。De和Pal曾对抗瘤酮A_(10)的类似物如3-对甲苯磺酰胺基-2,6-哌啶二酮等做过抗艾氏腹水癌活性评价,探讨了构效关系.但未见这些化合物的空间结构和电子结构方面的报道.我们合成了抗艾氏腹水癌活性较高的化合物3-对甲苯磷酰胺基-2,6-哌啶二酮的水解产物——对甲苯磺酰谷氨酰胺,并测定了其晶体结构。为进一步研究其分子结构与抗肿瘤活性的关系提供结构数据。     

X射线粉末衍射技术在酞菁同质多晶异构体研究中的应用

综述了无金属酞菁的晶体结构的研究状况、晶体类型的划分,并对晶型存在的合理性进行了初步探讨。     

两种ZSM-5沸石的晶体结构及其与吸附、扩散和反应性能的关系

用x-射线粉末衍射法研究了两种ZSM-5沸石的晶体结构。两者同属Pnma空间群,晶胞参数分别为:5001—a=20.118(?),b=19.923(?),c=13.410(?);5020—a=20.048(?),b=19.884(?),c=13.352(?)。两者基本结构形貌相近,但与5001相比,5020的骨架结构内存在更大的“应力”,因而较易遭到破坏,两种样品的孔道开口直径分别为:5001-正弦形通道5.080—5.650(?),平均5.367(?),直通道5.207—5.390(?),平均5.307(?);5020—正弦形通道5.111—5.655(?),平均5.368(?),直通道4.993—5.404(?),平均5.226(?)。两者正弦形通道开口尺寸和形状十分接近,而直通道开口尺寸和形状有一定差异,这种孔道结构上的差异是二者性能差别的一个不可忽视的原因。     

Synthesis,Electrocatalytic Properties and Crystal Structure of a New Organic—Inorganic Hybrid Constructed from Dodecamolybdophosphoric Acid and Benzotriazole

IntroductionIn the last few years there has been a rapidlygrowing number of reports in the literature ad-dressing the use of polyoxometalate- based hybridmaterials as catalysts,non- linear optical materialsand anti- virus drugs[1— 5] . In all the cases men-tioned above,the size,the shape and the chargesof the inorganic counter anions strongly affect theproperties of the materials. Polyoxometalates arelarge in size and high in electron accepting abili-ty[6] .They can form novel compounds with …     

粉末衍射技术解析青蒿素晶体结构方法学比对研究

以粉末X射线衍射技术(PXRD)表征有机物晶体结构为目的,选取我国第1个全新药物青蒿素(Artemisinin)验证粉晶解析有机物晶体结构方法的合理性。粉晶解析结果为正交晶系,P212121空间群,a=23.98223±0.01624,b=9.42480±0.00645,c=6.34589±0.00439,α=β=γ=90°,Z=4,V=1434.693;单晶解析结果为正交晶系,P212121空间群,a=23.9564(9),b=9.3224(5),c=6.3205(3),α=β=γ=90°,P212121,Z=4,V=1411.55(17)3;两者所确定分子非氢结构键长、键角、二面角的相关系数分别为0.9921、0.9833和0.9997,晶胞参数基本吻合,分子构型相似。结果表明,粉晶X射线衍射技术可以求得较为准确的青蒿素晶胞参数及晶胞内分子构型。     

普鲁士兰修饰电极的现场X射线衍射研究

利用Ｘ射线衍射仪－电化学装置－两台微机联机组成的Ｘ射线衍射差谱全自动电化学测量系统，并结合特制的电解池，现场测定了普鲁士兰修饰电极薄膜在电化学变过程中的Ｘ射线衍射差谱。结果证实在变色过程为了平衡体系电荷而进入和脱出修饰薄摸的Ｋ＾＋导致了薄膜晶体结构的转变。理论计算的Ｘ射线衍射差谱与实测结果基本一致。     

溶剂化金属原子浸渍法制备的Ni－Ag／γ－Al_2O_3催化剂的结构表征

应用溶剂化金属原子浸渍（ＳＭＡＩ）法和普通浸渍（ＣＩ）法制备了三种不同摩尔比的γ－Ａｌ２Ｏ３负载Ｎｉ－Ａｇ双金属催化剂。ＸＲＤ和磁测定结果表明ＳＭＡＩ催化剂中Ｎｉ和Ａｇ的粒度均小于金属含量相同的ＣＩ催化剂，ＳＭＡＩ催化剂中Ｎｉ和Ａｇ未形成合金，而ＣＩ催化剂中Ｎｉ和Ａｇ形成了合金。ＳＭＡＩ和ＣＩ催化剂都具有超顺磁性。ＸＰＳ测定结果表明ＳＭＡＩ催化剂中零价Ｎｉ和Ａｇ的含量均高于ＣＩ催化剂。ＳＭＡＩ催化剂Ｎｉ在表面含量高于体相，Ｎｉ在表面富集，而ＣＩ催化剂Ｎｉ在表面和体相的含量相同     

配合物[Co（NH3）5Br]Br2煌精密X射线粉末衍射与指标化研究

以多晶射中的从头结构测定对其数据收集与处理的要求为依据，获得「Ｃｏ（ＮＨ３）５Ｂｒ」－Ｂｒ２配合物的精密Ｘ射线粉末衍射谱的方法，总结了指标化实验中的问题与对策，得到标题配合物的正交晶系，晶胞参数：ａ＝１．３７１０（１）ｎｍ，ｂ＝１．０７１５（１）ｎｍ，ｃ＝０．６９４７（１）ｎｍ，Ｖ＿１．０２０６（１）ｎｍ＾３，Ｚ＝４，Ｄｘ＝２．５０ｇ．ｃｍ＾－３，Ｆ３０＝８１（０．００７１，５２），Ｍ２０＝４１。     

Correlation between Luminescence and EPR Spectroscopy as Evidence of Ytterbium Pair Formation in Li6Ln(BO3)3:Yb3+ (Ln=Gd,Y) Borate Single Crystals

Synthesized powders and grown single crystals of nominal compositions Li₆Ln(BO₃)₃:Yb³⁺ (Ln=Y, Gd) were investigated by means of powder and single‐crystal X‐ray diffraction (XRD), as well as optical near‐IR spectroscopy in conjunction with electron paramagnetic resonance (EPR) spectroscopy. The appearance of two distinct zero‐phonon lines suggests the existence of two kinds of Yb³⁺ ions in the single crystals. The XRD results exclude the possibility of a phase transition occurring between room and low temperatures. EPR spectra of single crystals show the presence of both isolated ions and pairs of ytterbium ions substituted for Y³⁺. A strong temperature dependence of the intensity of Yb–Yb pairs resonance lines coincides with temperature dependence of emission peak at 978 nm, confirming a common origin of the defect giving rise to these spectra. Calculated from EPR spectra, the distance between pairs of Yb³⁺ is in good agreement with crystallographic ones: R=3.856 Å, R_cryst=3.849 Å.     

New Phases in the Lithiumnitridovanadate System — The Solid Solution Li7‐2xMgx[VN4] with 0 ≤ x ≤ 1

Solid solution phases Li_7‐2xMg_x[VN₄] (0 < x ≤ 1) with varying Mg‐content are obtained as yellow microcrystalline powders from heat treatment of mixtures of VN, Li₃N and Mg₃N₂ or from mixtures of Li₇[VN₄] and Mg₃N₂ at 1370 K in N₂ atmosphere at ambient pressure. At substitution parameter values of x > 0.5 a subsequent distortion from the ideal cubic unit cell to an orthorhombic unit cell is observed. The crystal structure of Li_7‐2xMg_x[VN₄] with x ≈ 1 was refined from neutron and X‐ray powder diffraction data (space group Pbca, No. 61, a = 963.03(3) pm, b = 958.44(3) pm, c = 951.93(2) pm, neutron pattern 14° — 156° 2θ, step non‐linear ≈ 0.0782° 2θ, No. of measured points 1816, R_p = 0.089, R_wp = 0.115, R_Bragg = 0.155, R_F = 0.114; X‐ray pattern 10° — 98° 2θ, step 0.005° 2θ, No. of measured points 17600, R_p = 0.028, R_wp = 0.045, R_Bragg = 0.113, R_F = 0.133, structure variables: 45). The crystal structure resembles a Li₂O type superstructure with the atomic arrangement of β‐Li₇[VN₄] and with two crystallographic Li‐sites each substituted by Mg with statistical occupation factors of 0.5. Chemical analyses prove the composition and XAS spectroscopy at the V K‐edge support the +5 oxidation state assignment for vanadium. XAS data also support the tetrahedral coordination of vanadium by N as indicated by the structure refinements.     

One Electron Makes Differences: From Heme {FeNO}7 to {FeNO}8

The first X‐ray single‐crystal structure of a {FeNO}⁸ porphyrin complex [Co(Cp)₂][Fe(TFPPBr₈)(NO)], and the structure of the {FeNO}⁷ precursor [Fe(TFPPBr₈)(NO)] are determined at 100 K. The two complexes are also characterized by FTIR and UV/Vis spectroscopy. [Fe(TFPPBr₈)(NO)]^? shows distinct structural features in contrast to a nitrosyl iron(II) porphyrinate on the Fe? N? O^? moiety, which include a much more bent Fe? N? O^? angle (122.4(3)°), considerably longer Fe? NO^? (1.814(4)) and N? O^? (1.194(5) Å) bond distances. These and the about 180 cm^?1 downshift ν_N‐O stretch (1540 cm^?1) can be understood by the covalently bonding nature between the iron(II) and the NO^? ligand which possesses a two‐electron‐occupied π* orbital as a result of the reduction. The overall structural features of [Fe(TFPPBr₈)(NO)]^? and [Fe(TFPPBr₈)(NO)] suggest a low‐spin state of the iron(II) atom at 100 K.     

常温高压下移动颗粒层除尘试验研究

介绍了用于整体煤气化联合循环（IGCC）热煤气和增压流化床燃烧联合循环（PFBC-CC）高温烟气除尘的移动颗粒层试验台。调试阶段进行了一系列的条件试验。改进后的常温下进行了试验,结果表明在高压下能够实现颗粒层过滤和气力循环清灰的一体化稳定运动。研究发现移动颗粒层过滤时,气流之间的压力平衡是一个关键因素,运行中必须严格控制过滤气体和输送气体的压力。移动颗粒层过滤器和循环清灰系统的结构对过滤性能有较大的影响。     

Survival of the Fittest: Competitive Co‐crystal Reactions in the Ball Mill

The driving forces triggering the formation of co‐crystals under milling conditions were investigated by using a set of multicomponent competitive milling reactions. In these reactions, different active pharmaceutical ingredients were ground together with a further compound acting as coformer. The study was based on new co‐crystals including the coformer anthranilic acid. The results of the competitive milling reactions indicate that the formation of co‐crystals driven by intermolecular recognition are influenced and inhibited by kinetic aspects including the formation of intermediates and the stability of the reactants.     

Temperature driven morphological changes of hydrothermally prepared copper oxide nanoparticles

The size and shape of nanocrystals have a strong effect on the optical, electrical and catalytic properties. Therefore, controlling the size, shape and structure of nanocrystals is technically important. The controlled synthesis of CuO nanostructures was achieved using a hydrothermal process by simply controlling the precipitation reaction temperature between copper nitrate trihydrate and sodium hydroxide. The Scanning Electron Microscopy (SEM), EDS, XRD, and FTIR analysis revealed that the synthesized product at 200 °C is of pure copper oxide particles. From Scherrer formula, the prepared CuO particles varied approximately 3–7 nm in size simply by varying the reaction temperature. The synthesized particles exhibited a regular flake like morphology and had a uniform size distribution. The morphology and size depend on the reaction conditions. Copyright © 2008 John Wiley & Sons, Ltd.     

The Synthesis and Crystal Structure of NpSe3

Neptunium triselenide, NpSe₃, was synthesized in high yield by the reaction of the elements in a Sb₂Se₃ flux at 1223 K. Its structure has been determined by single‐crystal X‐ray diffraction methods. Thecompound crystallizes with two formula units in space group C$\rm^{2}_{2h}$ –P2₁/mof the monoclinic system in the TiS₃ structure type with cell constants at 100 K of a = 5.592(3) Å, b = 4.002(2) Å, c = 9.422(5) Å,β = 97.40(1) °. The asymmetric unit comprises one neptunium and three selenium atoms, each with site symmetry m. Np–Se interatomic distances range from 2.859(2) to 2.927(3) Å; the Se–Se bond length of 2.340(3) Å is typical of a single bond. The compound may thus be charge‐balanced and formulated as Np⁴⁺Se^2–Se₂^2–.