Layer by layer self-assembled polyelectrolyte multilayers with embedded phospholipid vesicles obtained by spraying: integrity of the vesicles

In a previous paper (Michel, M.; Vautier, D.; Voegel, J.-C.; Schaaf, P.; Ball, V. Langmuir 2004, 20, 4835), we showed that phospholipid vesicles can be incorporated into poly(glutamic-acid)/poly(allylamine) (PGA/PAH) multilayered polyelectrolyte films built by the alternated dipping of a surface in polyanion and polycation solutions. AFM imaging, quartz crystal microbalance, and ellipsometry suggested that the vesicles remain intact when adhering on the surface. In the present paper, we show that such films can also be realized by spraying both the polyelectrolyte solutions and the vesicles onto the surface. Using such vesicles filled with ferrocyanide ions, we prove by cyclic voltammetry that the sprayed vesicles remain intact when embedded in the multilayers. We show that multilayers containing two distinct layers of intact vesicles separated by several polyanion/polycation bilayers can also be constructed. Polyelectrolyte multilayers containing layers of phospholipid vesicles could act as reservoirs for drug or other biologically active molecules in controlled release bioactive coatings.     

Structure of the polyion complex between poly(sodium P-styrene sulfonate) and poly(diallyl dimethyl ammonium chloride)

Stoichiometric and nonstoichiometric polyion complex films were prepared from poly(sodium p-styrene sulfonate) and poly(diallyl dimethyl ammonium chloride). X-ray photoelectron spectroscopy revealed that the ionic groups in the complex are more ionized than in each component polymer. Fluorescence measurements showed that the complex had a main emission peak around 300 nm, whereas the peak for its original polyanion occurred at 324 nm. With the monomer and excimer peaks of the phenyl rings taken to be at 294 and 324 nm, respectively, the ratio of excimer to monomer emission intensities increased in proportion to the mole fraction of polyanion in the observed range 0.44–0.59. There was no discontinuity at the stoichiometric composition. Furthermore, the change in peak position shows that the local aggregation of phenyl groups in the polyanion was destroyed by complexation with the polycation through Coulombic forces. These results, together with the visual observation of the transparency of the films, mean that the mixing between polyanion and polycation chains in the polyion complex is on the molecular level and that this polymer alloy is miscible.     

PS胶体粒子表面逐层自组装固定化SOD及其生物活性

通过逐层自组装技术成功地把超氧化物歧化酶(SOD)吸附在聚苯乙烯(PS)胶体粒子表面.zeta电位和TEM证明了聚阳离子或聚阴离子型SOD与相反电荷的聚电解质在PS胶体粒子表面的交替吸附.通过测定SOD被胶体粒子吸附后上清液的生物活性,得到聚阴离子型SOD(pH=8.0)和聚阳离子型SOD(pH=4.3)在PS胶体粒子表面的吸附量分别为12和51IU,相对活性分别为23.4%和2.9%.聚阴离子型SOD在PS胶体粒子表面能形成平滑规整的膜,导致较高的相对活性.研究结果表明,通过调节pH值,可以优化自组装固定化酶的聚集状态和生物活性     

聚丙烯酸钠与聚(苯乙烯-co-4-乙烯基吡啶)阳离子复合作用的研究

聚电解质复合物 (Ｐｏｌｙｅｌｅｃｔｒｏｌｙｔｅｃｏｍｐｌｅｘ)是指带有相反电荷的两种聚电解质之间通过库仑力而结合形成的一类特殊的高分子材料[1 ] .由于生物体内的很多反应以及生物化学合成过程都是通过高分子复合物进行的 ,因此对高分子间相互作用及其聚集体形成的研究受到了人们的极大重视 .目前研究得较多的体系是聚苯乙烯衍生物 ,如Ｉｏｐｌｅｘ 1 0 1即由聚苯乙烯磺酸钠和聚氯化乙烯基苄基三甲基铵反应而得[2 ,3] .本文报道了不同电荷密度及相对分子质量的聚苯乙烯 ｃｏ 4 乙烯基吡啶的硫酸甲酯盐 ,与不同分子质量的聚丙烯酸钠…     

Self-assembled second order nonlinear optical multilayer azo polymer

An epoxy based polymer with nonlinear optical azo chromophores was designed to contain anionic groups to induce water solubility and self assembly. Using this polyanion with a polycation, multilayers were prepared on a glass substrate by alternating adsorption from dilute aqueous solutions. The azo chromophores in the confined layer of the polyanion in the multilayer films self-assemble into a noncentrosymmetric alignment and demonstrate second order optical nonlinearity (d₃₃ = 19 pm/V).     

New 2-in-1 polyelectrolyte step-by-step film buildup without solution alternation: from PEDOT-PSS to polyelectrolyte complexes

Although never emphasized and increasingly used in organic electronics, PEDOT-PSS (poly(3,4-ethylenedioxythiophene)-poly(styrene sulfonate)) layer-by-layer (lbl) film construction violates the alternation of polyanion and polycation rule stated as a prerequisit for a step-by-step film buildup. To demonstrate that this alternation is not always necessary, we studied the step-by-step construction of films using a single solution containing polycation/polyanion complexes. We investigated four different systems: PEDOT-PSS, bPEI-PSS (branched poly(ethylene imine)-poly(sodium 4-styrene sulfonate)), PDADMA-PSS (poly(diallyl dimethyl ammonium)-PSS), and PAH-PSS (poly(allylamine hydrochloride)-PSS). The film buildup obtained by spin-coating or dipping-and-drying process was monitored by ellipsometry, UV-vis-NIR spectrophotometry, and quartz-crystal microbalance. The surface morphology of the films was characterized by atomic force microscopy in tapping mode. After an initial transient regime, the different films have a linear buildup with the number of deposition steps. It appears that, when the particles composed of polyanion-polycation complex and complex aggregates in solution are more or less liquid (case of PEDOT-PSS and bPEI-PSS), our method leads to smooth films (roughness on the order of 1-2 nm). On the other hand, when these complexes are more or less solid particles (case of PDADMA-PSS and PAH-PSS), the resulting films are much rougher (typically 10 nm). Polycation/polyanion molar ratios in monomer unit of the liquid, rinsing, and drying steps are key parameters governing the film buildup process with an optimal polycation/polyanion molar ratio leading to the fastest film growth. This new and general lbl method, designated as 2-in-1 method, allows obtaining regular and controlled film buildup with a single liquid containing polyelectrolyte complexes and opens a new route for surface functionalization with polyelectrolytes.     

Polysaccharide films built by simultaneous or alternate spray: a rapid way to engineer biomaterial surfaces

We investigated polysaccharide films obtained by simultaneous and alternate spraying of a chitosan (CHI) solution as polycation and hyaluronic acid (HA), alginate (ALG), and chondroitin sulfate (CS) solutions as polyanions. For simultaneous spraying, the film thickness increases linearly with the cumulative spraying time and passes through a maximum for polyanion/CHI molar charge ratios lying between 0.6 and 1.2. The size of polyanion/CHI complexes formed in solution was compared with the simultaneously sprayed film growth rate as a function of the polyanion/CHI molar charge ratio. A good correlation was found. This suggests the importance of polyanion/polycation complexation in the simultaneous spraying process. Depending on the system, the film topography is either liquid-like or granular. Film biocompatibility was evaluated using human gingival fibroblasts. A small or no difference is observed in cell viability and adhesion between the two deposition processes. The CHI/HA system appears to be the best for cell adhesion inducing the clustering of CD44, a cell surface HA receptor, at the membrane of cells. Simultaneous or alternate spraying of CHI/HA appears thus to be a convenient and fast procedure for biomaterial surface modifications.     

Coadsorption of sodium dodecyl sulfate and a polyanion onto poly(ethylenimine) in multilayered thin films

Mixed surfactant-polyelectrolyte multilayer films were fabricated by both ionic self-assembly and spin assembly. A polycation [PEI = poly(ethylenimine)] was deposited from a dilute solution, while a polyanion (PAZO = poly[1-[4-(3-carboxy-4-hydroxyphenylazo) benzenesulfonamido]-1,2-ethanediyl, sodium salt]) was deposited from a mixture containing a fixed concentration of polyanion and various concentrations of the anionic surfactant sodium dodecyl sulfate (SDS). Coadsorption of SDS and PAZO onto PEI layers was observed using both deposition methods and attributed to strong PEI-SDS interactions and entropic factors. Increasing the concentration of SDS resulted in films containing progressively less adsorbed PAZO. No further reduction in the amount of adsorbed PAZO was observed above the SDS critical micelle concentration. We attribute the film growth behavior to a fast adsorption of SDS onto PEI, followed by a slower adsorption of PAZO onto the remaining unoccupied binding sites. We observe that SDS interpenetrates throughout the PAZO and PEI layers, increasing the surface hydrophobicity of both. We observed similar behavior for both ionically self-assembled and spin-assembled systems.     

Interaction of poly(styrene sulfonate) with polycations carrying charges in the chain backbone

The interaction between sodium poly(styrene sulfonate) (NaSS) and side-chain charged polycation polymer (pendent type) or main-chain charged polycation polymer (integral type) has been studied. It was found that the polyion complex (the reaction product of these polyelectrolytes) of pendent–pendent type has an equimolar composition at any mixing ratio of two component polymers. However, a polyion complex of integral–pendent type can form a water-soluble complex with a ratio of [polycation]/[polyanion] = 1/3, in addition to a complex with a equimolar composition. The mechanism of formation of this specific complex is discussed.     

分子沉积聚合物膜的制备及其摩擦学性能研究

以聚对磺酸钠苯乙烯(PSS)为聚阴离子、聚烯丙基氯化氨(PAH)为聚阳离子交替沉积制备了多层聚合物纳米复合膜,用热分析仪考察了这两种体相聚合物的热稳定性,采用紫外-可见光谱仪、椭圆偏振光测厚仪、接触角测量仪等分析了复合膜的性能,用DF-PM型动静摩擦系数精密测定装置考察了其摩擦学性能.结果发现,所制备的聚合物复合膜具有一定的减摩作用,原因是单晶硅表面沉积聚合物超薄膜可以降低表面的粘着力,对硅表面具有微观修饰作用,从而降低其同钢对摩时的摩擦系数;单晶硅表面分子沉积聚合物纳米复合膜的摩擦学特性同超薄膜的层数相关,沉积层数较多的超薄膜的耐磨寿命较长,并因加热处理而得到明显改善.     

Effect of the phase state of the lipid bilayer on the structure and characteristics of the polycation-(anionic liposome) complex

Interaction of the cationic polymer poly-N-ethyl-4-vinylpyridinium bromide with bilayer vesicles (liposomes) composed of zwitterionic dipalmitoylphosphatidylcholine and anionic cardiolipin (the molar fraction of the negatively charged cardiolipin groups is 0.2) is studied. The composition and characteristics of the polycation-liposome complex are shown to be controlled by the phase state of the lipid membrane. Liposomes whose membranes exist in their LC state (“liquid” liposomes) keep their integrity in the complex with polycation. The adsorbed polycation can be completely removed from the liposomal membrane by the addition excess amounts of a competing polyanion. The adsorption of polycation on the surface of liposomes whose membranes exist the gel state (“solid” liposomes) leads to the formation of defects in the membrane, and the polycation’s adsorption with such liposomes becomes irreversible. The defects that form are also preserved when solid liposomes on whose surface the polycation is sorbed are transformed into the liquid state. Moreover, the reversible contact between polycation and liquid liposomes becomes irreversible once the liposomal membranes bound to the polycation transform into the solid state.     

壳聚糖与重氮树脂磺酸盐的感光性超薄膜

由于壳聚糖 ( CS)具有抗菌性、抗病毒性、良好的生物相容性、生物降解性以及容易与金属离子螯合等性质 ,被广泛用于重金属回收 [1～ 3] 、药物释放 [4～ 6] 、伤口覆盖[7,8] 、膜分离 [9,10 ] 、日用化工 [11] 等方面 .近年来 ,人们对壳聚糖以及它的化学改性作了大量的研究 [12～ 14 ] .其中通过化学改性形成壳聚糖聚电解质 ,可与带相反电荷的聚电解质通过静电自组装 ( ESA)获得超薄膜 [15～ 18] .本文尝试用壳聚糖( CS)与二苯胺 - 4-重氮树脂磺酸盐 ( DRS)以及二苯胺 - 4-重氮树脂 ( DR)通过 ESA的方法 ,形成具有感光性的超薄膜 .经 …     

Assembly of poly(N-isopropylacrylamide)-co-acrylic acid microgel thin films on polyelectrolyte multilayers: Effects of polyelectrolyte layer thickness, surface charge, and microgel solution pH

Temperature- and pH-sensitive poly(N-isopropylacrylamide)?Cco-acrylic acid (pNIPAm-co-AAc) microgels were deposited on glass substrates coated with polyelectrolyte multilayers composed of the polycation poly(allylamine hydrochloride) (PAH) and the polyanion poly(sodium 4-styrenesulfonate) (PSS). The microgel density and structure of the resultant films were investigated as a function of: (1) the number of PAH/PSS layers (layer thickness); (2) the charge on the outer layer of the polyelectrolyte multilayer film; and (3) the pH of microgel deposition solution. The resultant films were studied by differential interference contrast optical microscopy, atomic force microscopy, and scanning electron microscopy. It was found that the coverage of the microgels on the surface was a complex function of the pH of the deposition solution, the charge on the outer layer of the polyelectrolyte thin film and the PAH/PSS layer thickness; although it appears that microgel charge plays the biggest role in determining the resultant surface coverage.     

Polyelectrolyte complexes. I. Synthesis and characterization of some insoluble polyanion-polycation complexes

The synthesis of some water-insoluble synthetic polyelectrolyte complexes formed between a weak polyanion and a strong polycation was followed. Sodium salts of poly(acrylic acid) and of some copolymers of acrylic acid with itaconic acid or maleic acid were used as anionic polymers. Cationic polyelectrolytes with quaternary ammonium salt groups in the main chain were used as strong polycations. The cationic polymers were different as concerns both the content of quaternary nitrogen atoms and the degree of branching. The complex formation was followed by the variation of the conductivity and of the specific viscosity of the reaction medium as well as by the turbidimetric titration versus the unit molar ratio polyanion/polycation. The deviation of the endpoint from stoichiometry was influenced mainly by the structure of the complementary polymers and by their molecular weights. The greater the structural differences, the higher the endpoint deviation from stoichiometry. Only insoluble polyelectrolyte complexes (PEC) were obtained in all the polyanion/polycation systems taken into account. The PECs were separated and characterized by elemental and spectral analyses as compared with the complementary polymers. © 1996 John Wiley & Sons, Inc.     

Internal structure of polyelectrolyte multilayers probed via neutral impact collision ion scattering spectroscopy

Layering in polyelectrolyte multilayer films has been studied by neutral impact collision ion scattering spectroscopy. The method affords a direct look at vertical ordering within these films at the nanometer scale. By labeling certain polyelectrolyte layers with heavy atom (Ru) probes, sufficient contrast has been obtained to visualize and quantify the distribution of these labeled polyelectrolytes throughout the film. The results indicate that the materials under investigation here produce linear film growth with very limited layer interpenetration. The interdigitation length between neighboring layers within the film is measured as 3.9 nm, which is approximately 1.4 times the thickness of an individual polycation/polyanion pair and is slightly less than the measured air/film roughness (4.7 nm). Detailed analysis shows that under the conditions used and at the depths probed in this study, the observed layer thickness is not significantly broadened by either instrumental or stochastic factors.     

Ion-Exchange Chromatographic Supports Obtained by Formation of Polyelectrolyte Multi-Layers for the Separation of Proteins

Summary High performance liquid chromatography (HPLC) was used to study the mechanism of formation of polyelectrolyte multilayers on porous silicas. The coatings were produced by alternating the adsorption of positively and negatively charged polymers. The stationary phases formed by adsorbing a single layer, double layers and triple layers were tested by studying the elution behavior of model proteins. The double polymer coating was achieved by adsorbing first a polycation such as hexadimethrine bromide (HB) on the HPLC silica support and then a polyanion such as dextran sulfate (DS) on the cationic layer formed. The retention properties of this support are mainly those of a cation exchanger as the negatively charged proteins were strongly retained while positively charged ones were weakly adsorbed. This work demonstrated the importance of the first underlying layer as the retention behavior of proteins was greatly affected by the properties of this coating. The triple polymer coating was achieved by adsorbing the polycation (HB) on the double layer coating (HB-DS). Its retention behavior was that of an anion exchange support. The HB-DS stationary phase displayed good chromatographic performances, with an adsorbed layer relatively stable. The polyelectrolyte multilayer coating procedure was useful to easily synthesize cation-exchange supports for the separation of basic proteins.     

Competition of hydrogen-bonding and electrostatic interactions within hybrid polymer multilayers

Using a layer-by-layer sequential adsorption technique, we report the construction of hybrid films in which layers of hydrogen-bonded polymers are embedded within electrostatically associated polyelectrolytes. The components of the hybrid film include a neutral hydrogen-bonding polymer, a weak polycarboxylic acid, and a strong polycation. Depending on the pH value used for the deposition of the electrostatic film, we found two distinctive regimes of film growth. At pHs lower than a critical value, deposition of electrostatic layers occurred on top of hydrogen-bonded stacks to produce hybrid, three-component films. At pHs higher than a critical value, neutral, hydrogen-bonded chains were displaced by the adsorbing chains of the polycation, producing two-component films. The property of the hydrogen-bonded stacks of hybrid films to be selectively dissolved by exposing them to a high pH makes these films promising candidates for producing free polyelectrolyte films.     

Antibacterial polyelectrolyte micelles for coating stainless steel

In this study, we report on the original synthesis and characterization of novel antimicrobial coatings for stainless steel by alternating the deposition of aqueous solutions of positively charged polyelectrolyte micelles doped with silver-based nanoparticles with a polyanion. The micelles are formed by electrostatic interaction between two oppositely charged polymers: a polycation bearing 3,4-dihydroxyphenylalanine units (DOPA, a major component of natural adhesives) and a polyanion (poly(styrene sulfonate), PSS) without using any block copolymer. DOPA units are exploited for their well-known ability to anchor to stainless steel and to form and stabilize biocidal silver nanoparticles (Ag(0)). The chlorine counteranion of the polycation forms and stabilizes biocidal silver chloride nanoparticles (AgCl). We demonstrate that two layers of micelles (alternated by PSS) doped with silver particles are enough to impart to the surface strong antibacterial activity against gram-negative E. coli. Moreover, micelles that are reservoirs of biocidal Ag(+) can be easily reactivated after depletion. This novel water-based approach is convenient, simple, and attractive for industrial applications.     

Polyelectrolyte complexes from polysaccharides: formation and stoichiometry monitoring

Colloids were obtained from non-stoichiometric polyelectrolyte complexes with two polysaccharides of opposite charge: chitosan and dextran sulfate (DS) as the polycation and polyanion, respectively. The complexes were elaborated by a one-shot addition of the polymer in default to the one in excess. The colloids were positively or negatively charged according to the nature of the polymer in excess. Dynamic light scattering (DLS) demonstrated that particles were formed at a very early stage in the complexation process. The consumption of the excess polyelectrolyte was monitored with a dye assay specific for dextran sulfate (toluidine blue) or chitosan (orange II). From these experiments, two different mechanisms of colloidal PEC formation were evidenced, according to the nature of the polymer in excess. On adding chitosan to DS in excess, regular consumption of the polyanion was observed at a constant stoichiometry, in the 1.5 to 1.85 range (sulfate residues for one glucosamine group), according to the molar mass of the polycation. When DS was added to chitosan in excess, the overall stoichiometry varied from ca. 6 (glucosamine residues for one sulfate group) down to 1 as the charge molar mixing ratio R=n+/n- decreased from 20 to 1. The existence of various mechanisms, according to the nature of the polymer in excess, could be attributed to the differences in chemical reactivity (strong vs low) of the ion in excess and the conformation and flexibility of the macromolecular chains related to their electrostatic potential.     

Layer-by-layer films from hyaluronan and amine-modified hyaluronan

Hyaluronan is a polysaccharide that is increasingly investigated for its role in cellular adhesion and for the preparation of biomimetic matrices for tissue engineering. Hyaluronan gels are prepared for application as space fillers, whereas hyaluronan films are usually obtained by adsorbing or grafting a single hyaluronan layer onto a biomaterial surface. Here, we examine the possibility to employ the layer-by-layer technique to deposit thin films of cationic-modified hyaluronan (HA+) and hyaluronan (HA) of controlled thicknesses. The buildup conditions are investigated, and growth is compared to that of other polyelectrolyte multilayer films containing either HA as the polyanion or HA+ as the polycation. The films could be formed in a low ionic strength medium but are required to be cross-linked prior to contact with a physiological medium. NIH3T3 fibroblasts were perfectly viable on self-assembled hyaluronan films with, however, a preference for hyaluronan ending films. These findings point out the possibility to tune the thickness of thin hyaluronan films at the nanometer scale. Such architectures could be employed for investigating cell/substrate interactions or for functionalizing biomaterial surfaces.