Biomolecule‐Assisted Construction of Cadmium Sulfide Hollow Spheres with Structure‐Dependent Photocatalytic Activity

In this study, we report the synthesis of monodispersive solid and hollow CdS spheres with structure‐dependent photocatalytic abilities for dye photodegradation. The monodispersive CdS nanospheres were constructed with the assistance of the soulcarboxymthyi chitosan biopolymer under hydrothermal conditions. The solid CdS spheres were corroded by ammonia to form hollow CdS nanospheres through a dissolution–reprecipitation mechanism. Their visible‐light photocatalytic activities were investigated, and the results show that both the solid and the hollow CdS spheres have visible‐light photocatalytic abilities for the photodegradation of dyes. The photocatalytic properties of the CdS spheres were demonstrated to be structure dependent. Although the nanoparticles comprising the hollow spheres have larger sizes than those comprising the solid spheres, the hollow CdS spheres have better photocatalytic performances than the solid CdS spheres, which can be attributed to the special hollow structure.     

Preparation of a colloidal array of NaTaO3 nanoparticles via a confined space synthesis route and its photocatalytic application

The confined space synthesis method has been applied to the preparation of sodium tantalate (NaTaO(3)); hydrothermal reaction of NaOH and Ta(2)O(5) was carried out in the pores of a three-dimensional mesoporous carbon, which was replicated by the colloidal array of silica nanospheres (SNSs) 20 nm in size. This approach led to the formation of a colloidal array of NaTaO(3) nanoparticles 20 nm in size with a surface area of 34 m(2) g(-1). The photocatalytic performance of the colloidal array of NaTaO(3) nanoparticles for overall water splitting under UV irradiation (λ > 200 nm) was evaluated after loading a NiO cocatalyst onto NaTaO(3) samples. The NiO-loaded NaTaO(3) nanoparticles showed photocatalytic activity for overall water splitting more than three times as high as non-structured bulk NaTaO(3) particles.     

The synthesis, structure, optical and photocatalytic properties of silica-coated cadmium sulfide nanocomposites of different shapes

The CdS nanostructure undergoes photochemical dissolution, and hence, the photocatalytic activity deteriorates with light irradiation time. A thin layer of silica coating over CdS surface may prevent the photocorrosion and coalescence of quantum size CdS particles. Hence, we synthesized SiO(2)@CdS nanocomposites of different shapes and characterized them by XRD, HRTEM, EDX, SAED, BET surface area measurement and absorption and emission study. The dispersion of spherical CdS (Cd-2.62 at% and S-2.33 at%) nanoparticles of cubic crystal structure into thick amorphous SiO(2) (43.79 at%) matrix is demonstrated here. The fabrication of core (CdS)-shell (SiO(2)) structure (SiO(2)@CdS) consisting of CdS nanorod (Cd-19.79 at% and S-22.90 at%) core (length ~126 nm and width ~6 nm) having characteristic lattice fringes of hexagonal crystals and thin SiO(2) (12.81 at%) shell (thickness=1-1.4 nm) is successfully achieved for the first time. The surface area (21.2m(2)/g) of CdS nanorod (aspect ratio=21) is found to increase (42.3m(2)/g) after SiO(2) coating. The photoluminescence of CdS nanosphere (485 nm) and nanorod (501 nm) is highly quenched after SiO(2) layer formation. The superior photocatalytic activity of SiO(2)@CdS composites for the benzaldehyde oxidation under UV irradiation has been displayed.     

Physicochemcial characteristic of CdS-anchored porous WS2 hybrid in the photocatalytic degradation of crystal violet under UV and visible light irradiation

In this work, we report the synthesis of CdS-incorporated porous WS₂ by a simple hydrothermal method. The structural, morphological, and optical properties of the samples were examined by X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), Fourier transform infrared spectroscopy (FTIR), high resolution X-ray photoelectron spectroscopy (XPS) and UV–visible spectrometry. The photocatalytic activities were established for degradation of crystal violet (CV) under UV and visible light irradiation. The CdS-incorporated porous WS₂ hybrid demonstrated high photocatalytic activity for degradation of CV pollutant compared to pure CdS nanoparticles and porous WS₂ sheets. This result implies that the CdS-incorporated porous WS₂ promoted more electron-hole pair transformation under UV and visible light irradiation. This significant enhancement of photocatalytic efficiency of CdS-incorporated porous WS₂ photocatalyst under visible light can be ascribed to the presence of CdS nanospheres on the meshed-like WS₂ sheets which potentially improves absorption in the visible range enabled by surface plasmon resonance effect of CdS nanospheres. The photostability and reusability of the CdS-porous WS₂ were examined through recycling experiments.     

Preparation of SiO2-Pt-CdS composite photocatalyst and its photocatalytic activity for hydrogen evolution under visible light

CdS nanoparticles were prepared by the precipitation method. Pt was loaded on CdS by photodeposition. SiO₂-Pt-CdS was synthesized via hydrolysis of tetraethylorthosilicate in the presence of Pt-CdS. The samples were characterized by XRD, BET, PL and UV-Vis techniques. The photocatalytic activity of the samples for hydrogen evolution was investigated under visible light irradiation (λ ≥ 420 nm). The stability and activity of CdS was improved by coating SiO₂.     

Construction of inorganic nanoparticles by micro-nano-porous structure of cellulose matrix

In our previous work, the CdS nanoparticles/cellulose films exhibited significantly high photocatalytic H₂ production efficiency under visible light irradiation than the ordinary CdS photocatalyst. In present paper, the CdS nanoparticles were synthesized in situ in pores of the regenerated cellulose substrate and the porous structure of cellulose, formation of the CdS nanoparticles and interactions between CdS and cellulose matrix in the composite films were investigated deeply. The experimental results indicated that the micro-nano-porous structure of the cellulose matrix could be used easily to create inorganic nanoparticles, which supplied not only cavities for the formation of nanoparticles, but also a shell (semi-stiff cellulose molecules support the pore wall) to protect their nano-structure. When the cellulose films with porous structure at wet state were immersed into inorganic ions solution, the ions interacted immediately with the –OH groups of cellulose, and then transformed into inorganic composite via another treatment, finally inorganic nanoparticles formed during the dry. The pore size of the cellulose matrix decreased from 180 nm (at wet state) to about 18 nm (at dry state), leading to the formation of nanoparticles. The results revealed that the CdS nanoparticles with a mean particle diameter about 6 nm were dispersed well, and were immobilized tightly in the cellulose matrix, resulting in a portable photocatalyst with high efficiency for photocatalytic for H₂ evolution. This is simple and “green” pathway to prepare the organic–inorganic hybrid materials.     

C@CdS/埃洛石纳米管复合光催化剂一步热解法的制备及光降解性能

通过一步热解法合成了一种新的复合光催化剂C@CdS/埃洛石纳米管(HNTs). 用扫描电镜(SEM),X射线能谱(EDS),透射电镜(TEM),X 射线衍射(XRD),紫外-可见漫反射光谱(UV-Vis DRS),傅里叶变换红外(FT-IR)光谱,比表面积和拉曼光谱(RS)对材料进行表征. 利用可见光下降解四环素探究了C@CdS/HNTs 的光催化活性. 结果表明,所制备的不同热解温度的样品中,400 ℃热解温度下的样品降解四环素效果最好,可见光照射60 min 降解率能达到86%. 此外,得益于碳层、CdS和HNTs 的共同作用,光催化剂展示了很好的稳定性. 放置一年对催化活性没有任何影响,并且经过三次循环实验,光催化剂活性没有很大变化. 最后讨论了光催化剂的制备机理,并且对光催化降解过程的中间产物进行了分析.     

原位合成具有高可见光催化活性的C3N4/CdS纳米复合材料

以硫氰酸铵和氯化镉为原料,采用无模板混合高温煅烧法一步合成氮化碳/硫化镉纳米晶(C3N4/CdS)的复合半导体材料。采用X射线衍射、傅立叶变换红外光谱和透射电镜等技术对其结构和形貌进行了表征。以有机污染物罗丹明B (RhB)为模拟污染物对复合催化剂的可见光催化活性进行测试。结果表明, C3N4/CdS复合材料中CdS以六方相纳米晶的形式均匀分散; CdS的复合基本不改变C3N4主体结构及聚合度;与纯C3N4相比,复合材料在可见区的光吸收能力有所增强。合适的能带匹配有利于光生载流子的迁移,抑制了其复合速率。在可见光照射下,复合半导体能够更加快速的降解有机污染物,且保持很好的稳定性。     

CdS nanospheres hybridized with graphitic C3N4 for effective photocatalytic hydrogen generation under visible light irradiation

Graphitic carbon nitride (g‐C₃N₄)‐based photocatalysts have received considerable attention in the field of photocatalysis, especially for photocatalytic H₂ evolution. However, the intrinsic disadvantages of g‐C₃N₄ seriously limit its practical application. Herein, CdS nanospheres with an average diameter of 135 nm prepared using a solvothermal method were used as co‐catalysts to form CdS/g‐C₃N₄ composites (CSCN) to enhance the photocatalytic activity. Various techniques were employed to characterize the structure, composition and optical properties of the as‐prepared samples. It was found that the CdS nanospheres were relatively uniformly dispersed on the surface of g‐C₃N₄. Moreover, the photocatalytic H₂ generation activity of the samples was evaluated using lactic acid as sacrificial reagent in water under visible light irradiation. When the amount of CdS nanospheres loaded in the hybridized composites was 5 wt%, the optimal H₂ evolution rate reached 924 μmol g^?1 h^?1, which was approximately 1.4 times higher than that (680 μmol g^?1 h^?1) of Pt/g‐C₃N₄ (3 wt%). Based on the results of analysis, a possible mechanism for the photocatalytic activity of CSCN is proposed tentatively.     

碳铂双助催化剂增强CdS空心球光催化产氢性能

利用半导体光催化分解水产氢是将太阳能转换为化学能最有前景的方法之一.在众多的半导体光催化剂中,硫化镉(CdS)不仅具有可见光响应的带隙值(约2.4 eV),而且其导带底和价带顶的能级横跨于水的氧化还原电势两端,能够在可见光照射下分解水产氢,这使得CdS成为一种热门的光催化剂而被广泛研究.然而,单一CdS由于光生电子?空...     

Facile Synthesis of Uniform Zinc-blende ZnS Nanospheres with Excellent Photocatalytic Activity toward Methylene Blue Degradation

Uniform and well-dispersed Zn S nanospheres have been successfully synthesized via a facile chemical route. The crystal structure, morphology, surface area and photocatalytic properties of the sample were characterized by powder X-ray diffraction(XRD), scanning electron microscopy(SEM), Brunauer-Emmett-Teller(BET) and ultraviolet-visible(UV-vis) spectrum. The results of characterizations indicate that the products are identified as mesoporous zinc-blende ZnS nanospheres with an average diameter of 200 nm, which are comprised of nanoparticles with the crystallite size of about 3.2 nm calculated by XRD. Very importantly, photocatalytic degradation of methylene blue(MB) shows that the as-prepared Zn S nanospheres exhibit excellent photocatalytic activity with nearly 100% of MB decomposed after UV-light irradiation for 25 min. The excellent photocatalytic activity of ZnS nanospheres can be ascribed to the large specific surface area and hierarchical mesoporous structure.     

氮掺杂石墨烯负载的硫化镉空心球纳米复合材料的光催化性能

通过无模板法一步合成了一种新型N掺杂石墨烯负载的CdS空心球复合材料. 采用X射线衍射、透射电镜、红外光谱、紫外-可见光谱、N₂吸附-脱附、荧光光谱和X射线光电子能谱等技术对该材料进行了表征, 并在可见光照射下测试了其在降解亚甲基蓝和水杨酸中的光催化性能. 结果表明, 相对于氧化石墨烯负载硫化镉空心球和单独的硫化镉空心球, 氮掺杂石墨烯负载的硫化镉空心球具有更高的光催化活性和稳定性. 这是由于氮掺杂的石墨烯能充当优异的电子受体和传输体, 从而抑制了载流子的复合. 另外发现, 羟基自由基是可见光下降解亚甲基蓝的主要活性物种.     

Preparation, photocatalytic activities, and dye-sensitized solar-cell performance of submicron-scale TiO2 hollow spheres

We prepared submicron-scale spherical hollow particles of anatase TiO2 by using a polystyrene-bead template. The obtained particles were very uniform in size, with a diameter of 490 nm and a shell thickness of 30 nm. The Brunauer-Emmett-Teller surface area measurements revealed a large value of 70 m2/g. The photocatalytic property was investigated by the complete decomposition of gaseous isopropyl alcohol under UV irradiation. It was indicated that the activity of the hollow spheres was 1.8 times higher than that of the conventional P25 TiO2 nanoparticles with a diameter of 30 nm. Furthermore, we fabricated a dye-sensitized solar cell (DSC) using an electrode of the TiO2 hollow spheres, and examined the photovoltaic performance under simulated sunlight. Although the per-area efficiency was rather low (1.26%) because of a low area density of TiO2 on the electrode, the per-weight efficiency was 2.5 times higher than those of the conventional DSCs of TiO2.     

可移动金核的二氧化钛空心球合成及光催化性质

Uniform hollow Au@TiO₂ core shell spheres with moveable Au nanoparticles were synthesized based on templating against Au@carbon spheres. The diameter of the shell of the Au@TiO₂ spheres could be controlled by adjusting the Ti(OC₄H₉)₄ hydrolyzing reaction time or the ratio of Ti(OC₄H₉)₄ to Au@carbon spheres, and the shell thickness of the core-shell spheres can be varied from 25 nm to 40 nm. As prepared hollow Au@TiO₂ core-shell spheres display enhanced photocatalytic activity in the initial stage of photocatalytic degradation of methylene blue compared with pure hollow TiO₂ spheres and the commercial photocatalyst TiO₂(P-25).     

LSPR增强0D/2DCdS/MoO3-xS型异质结的构建及其可见光光催化活性研究

近年来,等离子体半导体光催化剂因其具有从可见光到近红外光的光响应而引起了人们极大的研究兴趣.含有丰富氧空位的非化学计量的氧化钼(MoO3-x)具有中心位于700 nm和尾部吸收拓展至2000 nm强的局域表面等离子体共振(LSPR)效应,因此,MoO3-x或将成为实现全光谱响应光催化制氢技术最有吸引力的候选材料之一.然而,单一MoO3-x中电荷载流子的复合快速.具有II型、Z型或S型异质结构的MoO3-x基复合光催化剂的构建被证明是同时实现拓展光吸收和分离光生载流子改善光催化析氢性能的有效策略.与传统的Ⅱ型异质结构相比,Z型或S型可在较高还原电位上进行水分解反应,又可以实现光生载流子的有效分离.相比于Z型,S型由于内部电场导致的半导体的能带玩去可以进一步缩短电子与空穴之间的迁移距离,从而导致光诱导载流子的更快分离.基于此,本文选择了与MoO3-x能带匹配的CdS半导体催化剂,通过简单的共沉淀法在具有LSPR效应的二维(2D)MoO3-x椭圆纳米片上生长零维(0D)CdS纳米粒子,制备了LSPR增强的0D/2D CdS/MoO3-xS型异质结.由于MoO3-x的引入,0D/2D CdS/MoO3-x复合材料展现出了一个因LSPR效应而具有的从600到1400 nm的尾部吸收,并且这种尾部吸收强度随着复合材料中MoO3-x含量的增加而增加.在可见光光催化反应中,CdS/MoO3-x复合材料的产氢速率为7.44 mmol·g^-1·h^-1,为单一CdS的10.3倍.当采用不同波段的单色光作为激发光源,在420,450和550 nm单色光的照射下,CdS/MoO3-x复合材料的产氢效率为15.7,10.9和193.4 mmol·g^-1,分别比CdS高6.8,5.0和3倍.当激发波长拓展至650 nm时,CdS/MoO3-x复合材料的产氢效率为6.83 mmol·g^-1,而CdS则不具有产氢活性,侧面体现了MoO3-x的LSPR效应在提升光解水产氢活性方向的有效作用.我们利用肖特基和固体紫外测试确定了CdS和MoO3-x的能带结构,并通过第一原理密度泛函理论模拟计算了CdS和MoO3-x的功函数,分别为4.07和7.56 eV,当这两个半导体接触时,MoO3-x的费米能级比CdS的更负,电子将从CdS迁移到MoO3-x,因此CdS和MoO3-x的能带将分别向上和向下弯曲,直到其费米能级达到平衡.这种向上和向下的带弯曲是S型结构的特征之一.XPS分析也证实在带正电荷的CdS和带负电荷的MoO3-x之间会产生内部电场,这也符合S型结构.此外,还利用电子自旋共振(ESR)进一步研究了CdS,MoO3-x和CdS/MoO3-x在光照下自由基的产生情况,CdS/MoO3-x产生的DMPO-·O2?和DMPO-·OH信号强度均强于CdS和MoO3-x,证明CdS/MoO3-x能产生更多的·O2?和·OH自由基.ESR结果还表明,在CdS/MoO3-x复合材料中光诱导电子和空穴仍然分别停留在CdS的导带和MoO3-x的价带中,CdS/MoO3-x复合材料的光诱导电荷分离机制将遵循S型机制,而不是传统的II型异质结.在光照下,内部电场和弯曲能带促使积聚在MoO3-x导带上的电子与CdS的空穴结合,在CdS的导带上留下具有较强氧化还原能力的电子参与光催化水还原反应,实现高效的光催化产氢.     

Hierarchical,Titania‐Coated,Carbon Nanofibrous Material Derived from a Natural Cellulosic Substance

Hierarchical, titania‐coated, nanofibrous, carbon hybrid materials were fabricated by employing natural cellulosic substances (commercial filter paper) as a scaffold and carbon precursor. Ultrathin titania films were firstly deposited by means of a surface sol–gel process to coat each nanofiber in the filter paper, and successive calcination treatment under nitrogen atmosphere yielded the titania–carbon composite possessing the hierarchical morphologies and structures of the initial paper. The ultrathin titania coating hindered the coalescence effect of the carbon species that formed during the carbonization process of cellulose, and the original cellulose nanofibers were converted into porous carbon nanofibers (diameters from tens to hundreds of nanometers, with 3–6 nm pores) that were coated with uniform anatase titania thin films (thickness ≈12 nm, composed of anatase nanocrystals with sizes of ≈4.5 nm). This titania‐coated, nanofibrous, carbon material possesses a specific surface area of 404 m² g^?1, which is two orders of magnitude higher than the titania–cellulose hybrid prepared by atomic layer deposition of titania on the cellulose fibers of filter paper. The photocatalytic activity of the titania–carbon composite was evaluated by the improved photodegradation efficiency of different dyes in aqueous solutions under high‐pressure, fluorescent mercury‐lamp irradiation, as well as the effective photoreduction performance of silver cations to silver nanoparticles with ultraviolet irradiation.     

A candy-like photocatalyst by wrapping Co,N-co-doped hollow carbon sphere with ultrathin mesoporous carbon nitride for boosted photocatalytic hydrogen evolution

Hierarchical carbon material is used as a star cocatalyst in the field of photocatalysis due to its excellent catalytic properties. In this work, mesoporous carbon nitride sheet (MCNS) photocatalyst introduced nitrogen-doped hollow carbon spheres assembled with cobalt nanoparticles (Co@NHC) is synthesized by electrostatic adsorption. A series of characterizations are analyzed to display the structures, morphologies and optical properties of as-prepared materials. The photocatalytic activity of Co@NHC/MCNS material is evaluated with hydrogen evolution under visible light irradiation. The results indicate that 5 wt% Co@NHC/MCNS material reveals higher photocatalytic activity of hydrogen evolution rate of 3675 µmol/g with 4 h reaction time, which is 159 times than that of pure MCNS material. The carbon material with excellent charge transport properties can effectively accelerate the charge transfer from ultrathin MCNS to cobalt nanoparticles. The goal of improving the photocatalytic performance of Co@NHC/MCNS material is achieved. As a result, it provides a feasible and promised approach for doping transition metals to enhance photocatalytic activity.     

Preparation of novel silica-cadmium sulfide composite nanoparticles having adjustable void space by size-selective photoetching

The size-selective photoetching technique was used to control the size of a CdS nanoparticle inside a silica shell. With monochromatic light irradiation, the diffuse reflectance spectra of silica-coated CdS nanoparticles were blue-shifted, and the size of the resulting CdS nanoparticles incorporated in the silica shells was adjustable by varying the wavelength of irradiated light. TEM observation revealed that the original CdS nanoparticle seemed to be in close contact with the amorphous silica shell to leave almost no clearance, while the monochromatic light irradiation caused the decrease in the size of CdS particles, resulting in the formation of a void space between the photoetched CdS core particle and the silica shell. The average void spaces available in the shells were calculated to be ca. 1.4 and 2.4 nm with the irradiation at 514 and 458 nm, respectively. These results indicated that the size-selective photoetching technique enables the regulation of void space formed in the core-shell structure by choosing the wavelength of irradiation light.     

Core-shell structure CdS/TiO2 for enhanced visible-light-driven photocatalytic organic pollutants degradation

CdS modified mesoporous titania core-shell spheres (CdS/CS-TiO₂) with enhanced visible-light activity were synthesized by an in situ method. This method included two steps: planting CdO into the framework of anatase TiO₂ core-shell spheres and then converting it to CdS by ion-exchange. The physicochemical properties of the obtained samples were investigated by X-ray diffraction, scanning electron microscopy, transmission electronic micrograph, UV–vis diffuse reflectance spectra and nitrogen sorption. The in situ strategy resulted in CdS quantum dots highly dispersed in CS-TiO₂ without destroying the mesoporous core-shell structure. Compared with CS-TiO₂, the as-synthesized samples exhibited stronger visible-light absorption capability and greatly enhanced photocatalytic activity toward the degradation of Rhodamine B and 4-chlorophenol aqueous solution under visible light irradiation (λ > 420 nm).     

Enhanced photocatalytic activity in composites of TiO2 nanotubes and CdS nanoparticles

A new composite consisting of TiO(2) nanotubes and CdS nanoparticles, where CdS particles bind covalently to the titania surface through a bifunctional organic linker, was successfully fabricated; this titania nanotube-based composite shows enhanced photocatalytic activity under visible-light irradiation.