<Superscript>1</Superscript>H and <Superscript>13</Superscript>C NMR spectra of some drimanic sesquiterpenoids

One- and two-dimensional homo- and heteronuclear correlation proton, carbon, proton—proton, and proton—carbon NMR spectra of fifteen drimanic sesquiterpenoids: 11,12-dibromodrima-5,8-dien-7-one, drim-8-en-7-one, 11-hydroxydrim-8-en-7-one, 11,12-dihydroxydrim-8-en-7-one, 11-hydroxy-11,12-epoxydrim-8-en-7-one, 11-hydroxy-11,12-epoxydrim-8-en-7-one, 8,9-epoxydriman-7-one, 8,9-epoxydriman-7-ol, 11,12-diacetoxydrim-8-en-7-ol, drimane-7,8,11-triol, 7,8-isopropylidenedioxydriman-11-al, 9, 11-dihydroxydrim-7-en-6-one, drimane-7,8,9-triol, drimane-7,8,11-triol, and drim-8-ene-7,11,12-triol were studied. The proton and carbon chemical shifts were assigned.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2589–2594, December, 2004.     

The structure of chain segments and <Superscript>1</Superscript>H NMR spectra of polychloroprene

The ¹H NMR spectra (working frequencies of 500 and 600 MHz) of polychloroprenes are studied. The spin systems of protons for monomer units of different configurations (1,2, 3,4, 1,4-cis-and 1,4- trans- units), as well as for dyad and triad combinations of 1,4 units, are classified. A high working frequency, the method of double resonance, and the calculation of chemical shifts by empirical increments make it possible to refine the assignment of ¹H NMR signals.     

Quantitative analysis of hydrogen peroxide by <Superscript>1</Superscript>H NMR spectroscopy

A technique utilizing ¹H NMR spectroscopy has been developed to measure the concentration of hydrogen peroxide from 10^–3 to 10 M. Hydrogen peroxide produces a peak at around 10–11 ppm, depending upon the interaction between solvent molecules and hydrogen peroxide molecules. The intensity of this peak can be monitored once every 30 s, enabling the measurement of changes in hydrogen peroxide concentration as a function of time. ¹H NMR has several advantages over other techniques: (1) applicability to a broad range of solvents, (2) ability to quantify hydrogen peroxide rapidly, and (3) ability to follow reactions forming and/or consuming hydrogen peroxide as a function of time. As an example, this analytical technique has been used to measure the concentration of hydrogen peroxide as a function of time in a study of hydrogen peroxide decomposition catalyzed by iron(III) tetrakispentafluorophenyl porphyrin.Electronic Supplementary Material Supplementary material is available for this article at     

Metabolic analysis of human biological fluids by <Superscript>1</Superscript>H NMR spectroscopy

High-resolution NMR spectroscopy is widely used for the determination of the structure of complex molecules and the quantitative analysis of multicomponent mixtures in solutions. In the past decade, the extremely rapid development of NMR instrumentation resulted in an increase in the resolution and sensitivity of instruments by more than an order of magnitude. This has opened up new opportunities for the use of NMR spectroscopy in the quantitative analysis of the most important biological fluids (urine, blood plasma, cerebrospinal fluid, saliva, bile, tears, etc.), each of them can contain to several thousands of components in micromolar or lower concentrations. Clinicians and biologists from many countries used new capabilities of NMR spectroscopy to develop efficient methods for metabolic studies, medical diagnostics, and the development of new pharmaceutical preparations. This review briefly describes the status of studies in this new rapidly developing area of analytical chemistry and summarizes some of our experimental results.     

Determination of galactosamine impurities in heparin samples by multivariate regression analysis of their <Superscript>1</Superscript>H NMR spectra

Heparin, a widely used anticoagulant primarily extracted from animal sources, contains varying amounts of galactosamine impurities. Currently, the United States Pharmacopeia (USP) monograph for heparin purity specifies that the weight percent of galactosamine (%Gal) may not exceed 1%. In the present study, multivariate regression (MVR) analysis of ¹H NMR spectral data obtained from heparin samples was employed to build quantitative models for the prediction of %Gal. MVR analysis was conducted using four separate methods: multiple linear regression, ridge regression, partial least squares regression, and support vector regression (SVR). Genetic algorithms and stepwise selection methods were applied for variable selection. In each case, two separate prediction models were constructed: a global model based on dataset A which contained the full range (0–10%) of galactosamine in the samples and a local model based on the subset dataset B for which the galactosamine level (0–2%) spanned the 1% USP limit. All four regression methods performed equally well for dataset A with low prediction errors under optimal conditions, whereas SVR was clearly superior among the four methods for dataset B. The results from this study show that ¹H NMR spectroscopy, already a USP requirement for the screening of contaminants in heparin, may offer utility as a rapid method for quantitative determination of %Gal in heparin samples when used in conjunction with MVR approaches.     

Quantitative <Superscript>2</Superscript>H NMR spectroscopy

The selectivity of deuterium distribution between the nonequivalent positions in 3-carene (1), 4-α-acetyl-2-carene (2), and 4-(1-hydroxyethyl)-2-carene (3) has been measured by ²H-{¹H} NMR spectroscopy at the natural abundance of deuterium. These “H/D-isotope portraits” were shown to be typical of terpenes and terpenoids produced in plants via the biosynthetic DXP pathway. The mechanism of acylation of 1 was studied by the density functional theory method (PBE functional, TZ2p basis set). The six-membered ring in compound 1 is planar. However, the endo attack of electrophiles on this ring is more favorable both kinetically and thermodynamically. It was shown both experimentally and theoretically that the elimination of a hydrogen atom in the second reaction step proceeds stereoselectively at the C(2) atom from the anti position with respect to the three-membered ring and occurs with pronounced nucleophilic assistance from the carbonyl group. For Part 2, see Ref. 1. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1657–1664, August, 2008.     

A <Superscript>1</Superscript>H NMR study of Nile Red solvation

In order to evaluate the capabilities of NMR spectroscopy for investigation of the solvatochromic effect in luminophore solutions, the ¹H NMR chemical shifts of Nile Red in mixtures of solvents with different polarities (benzene, toluene, methanol) has been determined. Their dependence upon the solvent mixture composition has been revealed and binding sites for luminophore and solvent component molecules have been determined. The results of the NMR study are consistent with data on the fluorescence of Nile Red solutions in toluene-ethanol mixtures.     

High-Resolution <Superscript>1</Superscript>H and <Superscript>13</Superscript>C NMR of Glycyrrhizic Acid and Its Esters

Resonances for protons and C atoms in the ¹H and ¹³C NMR spectra of glycyrrhizic acid and its esters were assigned using high-resolution ¹H (600 MHz) and ¹³C (150 MHz) NMR methods. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 4, pp. 347–350, July–August, 2005.     

Mechanism of proton conductivity in polyvinyl alcohol-phenolsulfonic acid membranes from <Superscript>1</Superscript>H and <Superscript>13</Superscript>C NMR data

With line narrowing during magic angle spinning in solid-state NMR, molecular mobility and hydration in composite membranes based on polyvinyl alcohol (PVA) and phenol-2,4-disulfonic acid (PSA) were studied as functions of the ratio of the acidic and polymeric components, the degree of cross-linking in the polymeric matrix, and the moisture content. It is shown that at high relative humidity proton transport takes place by means of the network of hydrogen bonds, which are formed by the H⁺ counterions, sulfonate groups, and water molecules. At low moisture content, the hydroxyl groups in PVA play an active role in proton transport.     

Hydridosilazanes hydrolysis-condensation reactions studied by <Superscript>1</Superscript>H and <Superscript>29</Superscript>Si liquid NMR spectroscopy

Hydridosilazane compounds containing Si–N and Si–H bonds can be used as precursors of SiO_x materials. The hydrolysis-condensation reactions of tetramethyldisilazane, as a polyhydridosilazane model compound, were investigated by ¹H and ²⁹Si liquid NMR spectroscopy. These reactions were carried out at room temperature for up to 120 min in presence of water. The identified products are short linear siloxane species (hydride terminated polydimethylsiloxanes M^HD_xM^H) and cyclosiloxanes. Silicon hydride persistence in the reactional mixture suggested that silazane group is more sensitive to hydrolysis reaction than silicon hydride group. Moreover, additional experiments evidenced that the low steric hindrance of the silicon hydride influences the silazane hydrolysis kinetic. Hence the presence of ammonia released during silazane hydrolysis reaction was demonstrated to be a catalyst of the silicon hydride hydrolysis reaction.     

Determination of configurational isomers in polybutadienes by <Superscript>1</Superscript>H and <Superscript>13</Superscript>C NMR spectroscopy

The NMR spectra (600 MHz) of polybutadienes containing different amounts of cis-1,4, trans- 1,4 and 1,2 units are analyzed. The critical consideration of signal assignment and the comparison of ¹H and ¹³C NMR data reveal that there are significant limitations to the quantitative characterization of polybutadienes with the use of NMR spectroscopy.     

Structural features of acidic fluorophosphatozirconates (hafnates) from the <Superscript>19</Superscript>F, <Superscript>31</Superscript>P, <Superscript>1</Superscript>H NMR data

Fluorophosphatometallates with the composition K₃H₃Zr₃F₃(PO₄)₅, Rb₃H₃Zr₃F₃(PO₄)₅, Rb₃H₃Hf₃F₃(PO₄)₅, CsH₂Hf₂F₂(PO₄)₃?2H₂O are studied by ³¹P, ¹⁹F, and ¹H NMR. It is found that protons enter in the composition of hydrophosphate groups and fluorine atoms occupy the terminal sites in the tetravalent metal environment. Schemes of the crystal structure of fluorophosphatometallates are proposed. It is established that in CsH₂Hf₂F₂(PO₄)₃?2H₂O water molecules are bonded to the phosphate group proton via a strong hydrogen bond and are characterized by a low energy barrier of molecular motions.     

Prototropic processes in benzaurins. <Superscript>19</Superscript>F and <Superscript>1</Superscript>H NMR spectra of fluoro- and methylsubstituted 4-hydroxyphenyl-diphenylcarbinols,related fuchsones and benzaurins

Tautomerism of benzaurins and hydration are studied. ¹H and ¹⁹F chemical shifts have been determined for a number of substituted 4-hydroxyphenyl-diphenyl carbinols containing fluorine in a 3-, 3*- or 4*-position, and for similar compounds containing additional methyl groups in a position of 3, 3** or 4**. The same data have been obtained for the fuchsones prepared by dehydration of the above carbinols. On this basis chemical shifts of fluorine in different positions have been evaluated as a monitor of the transformation of 4-hydroxyphenyl group to the semiquinone moiety. The ¹⁹F NMR can be used to monitor the transformation of 4**-fluorobenzaurin and the related 3,3*-disubstituted and 3,3*,5,5*-tetramethylsubstituted compounds to the corresponding carbinols due to the addition of a water molecule and to study the tautomerism of the two latter benzaurins as well as that of 3,3*,4**trifluorobenzaurin. Furthermore, fluorine and methyl group chemical shifts are sensitive to syn-anti-isomerism in substituted fuchsones.     

Determination of the molecular weight of polyoxypropylenepolyols by <Superscript>1</Superscript>H NMR spectroscopy

Commercial and laboratory samples of polyoxypropylenepolyols were studied by ¹H NMR spectroscopy at operating frequencies of 100 and 500 MHz. Various methods depending on the solvent used were suggested for determining the equivalent weight (molecular weight of the polyether per terminal hydroxy group). The ¹H NMR data are compared to the data obtained by chemical methods and gel permeation chromatography.     

<Superscript>1</Superscript>H and <Superscript>7</Superscript>Li NMR in defect cobaltite Li<Subscript>0.6</Subscript>CoO<Subscript>2</Subscript>

Within a temperature range of 120–330 K, ⁷Li NMR spectra in Li_0.6CoO₂ are obtained. It is shown that as the temperature increases, both smooth and stepwise variation of ⁷Li NMR contact shifts occurs. The observed effects are explained by the occupation of the excited levels of cobalt ions. The stepwise change of the resonance line width depending on the temperature is revealed. It is driven by the features of the diffusive motion of lithium ions. The calculation of the ¹H NMR line shape provides the determination of the ratio of one-, two-, and three-spin proton clusters in Li_0.6CoO₂·xH₂O.     

2-Amino-4-aryl-1-arylideneaminoimidazoles and Acylation Products: A Multinuclear (<Superscript>1</Superscript>H, <Superscript>13</Superscript>C, <Superscript>15</Superscript>N) NMR Study

Summary. The structure of 2-amino-4-aryl-1-arylideneaminoimidazoles in DMSO-d₆ solution was investigated by means of NMR spectroscopic methods (¹H, ¹³C, ¹⁵N). From these data the (E)-configuration at the excocyclic C=N bond and a strong preference for the conformer with the imidazole H-5 and the N=CH proton being spatially close (s-trans regarding the N–N bond) can be concluded. Reaction of the title compounds with acetic anhydride leads to mono and diacylation at the 2-amino group, whereas treatment with pivalic anhydride exclusively affords the corresponding monoacyl product. The mono- and diacylation products exhibit similar configurational and conformational properties as the parent compounds.     

<Superscript>13</Superscript>C NMR analysis of cellulose samples from different preparation methods

Alpha-cellulose is a part of the wooden material that preserves isotopic composition during tree-growth, and therefore provides important indirect data for paleoclimatological studies. For this reason, it is exceptionally important to extract the alpha-cellulose component from plants, e.g. from tree rings of wood. Since the cell wall of plant cells consists of multicomponent polysaccharides, the extraction of cellulose from wood is not an obvious task. In this paper, we describe, evaluate and compare nine methods, based on the literature and experimental observations, for obtaining cellulose from tree rings of wood. We show that the distortionless enhancement by polarization transfer (DEPT-135) variant of liquid-state ¹³C NMR spectroscopy is a powerful analytical method for monitoring the preparation process. Trifluoroacetic acid was applied as solvent for the NMR analysis. We proved that all the preparation methods give pure cellulose samples without hemicellulose and lignin content, and we propose methods resulting in non-fragmented cellulose. ¹³C and ¹⁸O isotope ratio measurements have shown that all the applied extraction methods result in similar isotope ratios, thus they are suitable for paleoclimatological studies.     

State of water in amorphous silica samples from rice hulls: A <Superscript>1</Superscript>H NMR study

Behavior of molecules of adsorbed water in rice hulls, weevil, and amorphous samples of carbon-containing (carbonized, SiO₂ content 47%) and pure silica was studied by ¹H NMR spectroscopy in the temperature range from 200 to 298 K. The temperature dependence of the signal intensity from humid samples shows a decrease in temperature of freezing of the adsorbed water and presence of unfrozen water. This dependence was used for estimating the pore size distribution. For pure amorphous silica, the pore diameter is in the range from 50 to 150 Å with a maximum at about 85 Å.