Dithiadiazolium salts as initiators for the cationic ring-opening polymerization of tetrahydrofuran

Mono-, bis- and tris-(1,3,2,4-dithiadiazolium) salts [R-(CNSNS ⁺)_n]_n+[AsF^-₆]_n (R = aryl, n = 1, 2, 3) were found to initiate the cationic ring-opening polymerization of tetrahydrofuran (THF) at room temperature to give clear gels from which the pure polymer was precipitated. 1,3,2,4-Dithiadiazolium cations associated with the hard [AsF₆]^- anion thus constitute a new class of cationic polymerization initiators. The poly(THF) formed by initiation with 1,3,2,4-dithiadiazolium cation was characterized by gel permeation chromatography, infrared spectrophotometry, and ¹³C-NMR spectroscopy. Number-average molecular weights of 198 700 g mol^-1 (polydispersity 1.96) and 190 000 g mol^-1 (polydispersity 1.61) were obtained using [PhCNSNS ] [AsF₆] and [C₆H₃-1,3,5-(CNSNS )₃][AsF₆]₃, respectively, as initiators. The use of multifunctional dithiadiazolium salts as initiators suggests that they may be useful in the preparation of starburst and dendritic polymers. © 1992 John Wiley & Sons, Inc.     

Titanium-salen complexes as initiators for the ring opening polymerisation of rac-lactide

A family of bis(iso-propoxide) titanium(IV) complexes supported by tetradentate Schiff base (salen) ligands has been synthesised and characterised, including a structural determination of N,N'-bis(6'-methylenimino-2',4'-di-tert-butylphenoxy)cyclohexyl-(1R,2R)-diamino titanium(IV) bis(iso-propoxide). Their suitability for initiating the ring-opening polymerisation of rac-lactide has been investigated. Polymerisation activities are shown to correlate with the electronic properties of the substituents within the salen ligand. In contrast to aluminium-salen initiators, electron-withdrawing substituents on the Schiff base ligand have a detrimental influence upon polymerisation activities, whereas the use of electron-donating alkoxy-functionalized ligands has allowed the highest recorded activity to date for a titanium-based initiator.     

Potassium-graphite intercalation compounds as initiators for ethylene oxide polymerization in benzene and tetrahydrofuran

The ability of alkali graphitides KC₂₄ and LiC₁₂ to initiate the polymerization of ethylene oxide in benzene and THF has been studied. Polymerization by LiC₁₂ leads to small quantities of oligomers; KC₂₄ causes quantitative polymerization. Initiation and chain growth take place in the interlayer space and the solvent nature does not affect the polymerization. The orders of the polymerization with respect to monomer and initiator have been determined. The polymerization rate is constant up to high conversion and initiator efficiency increases with the yield.     

Robust chiral zirconium alkoxide initiators for the room-temperature stereoselective ring-opening polymerisation of rac-lactide

Chiral Schiff bases (1H to 4H) and a series of their Group 4 metal alkoxide complexes [(R-1)2Ti(O(i)Pr)2, (R-2)2Ti(O(i)Pr)2, (R-1)(2)Zr(O(i)Pr)2, (R-2)2Zr(O(i)Pr)2, (R-3)2Zr(O(i)Pr)2, (R-4)2Zr(O(i)Pr)2, (S-1)2Zr(O(i)Pr)2 and (rac-1)2Zr(O(i)Pr)2] have been prepared and characterised by 1H, and 13C NMR spectroscopy. In solution, both Lambda and Delta isomers were observed, suggesting a low degree of chiral induction from the ligand. One ligand (R-4H) and three complexes [Delta-(R,R-2)2Ti(O(i)Pr)2, Lambda-(R,R-1)2Zr(O(i)Pr)2 and Delta-(R,R-3)2Zr(O(i)Pr)2] have also been characterised by single crystal X-ray diffraction. All complexes were found to have a pseudo-octahedral alpha-cis geometry. The complexes were tested as initiators for the ring-opening polymerisation of rac-lactide in solution and in the melt. The titanium complexes are inactive in solution and afford atactic polylactide in the melt. Zr(iv) complexes afford heterotactically enriched polylactide both in toluene solution (at 20 degrees C and 80 degrees C) and in the melt. Polymerisations were generally found to be well-controlled, giving predictable molecular weights and low molecular weight distributions. Ligand variation (substituents and/or chirality) has little effect on either the activity or selectivity of initiators. Zirconium initiators were found to be unusually robust as they were able to maintain well-controlled polymerisation following addition of water to reactions in solution and when using unpurified monomer for reactions in the melt.     

Inorganic/organometallic catalysts and initiators involving weakly coordinating anions for isobutene polymerisation

Polyisobutenes have numerous industrial applications, e.g. as rubbers, sealants, lubricants and oil additives. For the latter two applications, being the largest end-use markets, polyisobutenes are produced on a several 105 t scale per year. Polyisobutenes applied in mineral oil applications are of low molecular weight. They are industrially produced at temperatures below 0 °C, usually with very active but simple inorganic Lewis acid initiators. During the last decade, research groups developed and examined new types of mostly inorganic/organometallic initiators that work closer to ambient temperatures and provide polymer products of high quality, being at least on a par with the current large scale produced industrial products. An overview on the state of the art and new developments is given in this article.     

Reactions involving fluoride ion. Part 40. Amines as initiators of fluoride ion catalysed reactions

Tetrakis(dimethylamino)ethene (TDAE) and trimethylamine react with anhydrous unsaturated fluorocarbons to produce, ‘in situ’, powerful fluoride- ion sources. These are used to initiate carbon- carbon bond forming reactions eg. oligomerisation and polyfluoroalkylation, and many of these reactions occur efficiently in the absence of a solvent.     

Novel co-catalytic activity of zinc metal with classical initiators for the ring opening polymerisation of norbornene

Zinc metal was shown to considerably increase the activity of the metal(III) chloride salts of ruthenium, iridium and osmium as metathesis initiators for the ROMP of norbornene. The stereochemistry of the polymers formed was determined by ¹H and ¹³C NMR. Formation of the initial carbene species is not via the normally accepted vinyl hydride mechanism. An alternative mechanism involving a metallacyclopentane intermediate is postulated.     

Initiating efficiency of poly(ethylene glycol)-based initiators for transition metal mediated living radical polymerisation

The kinetics of the copper mediated living radical polymerisation of methyl methacrylate initiated by [poly(ethylene glycol) methyl ether]-based initiators (MeOPEG) of various molecular weights was followed by ¹H NMR. The initiator efficiency of the macroinitiators was investigated. It was found that temperature and solvent have little effect on the reactivity of the macroinitiator, whilst chain length affects greatly the MeOPEG initiating efficiency. Steric hindrance is thought to be a main drawback, as difficult access of the monomer to the MeOPEG active chain-end and coordination of the copper catalyst to the MeOPEG chains can prevent the monomer to react with the macroinitiator.     

Titanium alkoxides as initiators for the controlled polymerization of lactide

Fourteen titanium alkoxides were synthesized for comparison of their catalytic properties in the bulk and solution polymerization of lactide (LA). In bulk polymerizations, they are effective catalysts in terms of polymer yield and molecular weight. Titanatranes gave polylactides with significantly increased molecular weight over more extended polymerization times, and those with five-membered rings afforded polymers in higher yields and with larger molecular weights than their six-membered ring counterparts. Steric hindrance of the rings was found to significantly affect polymer yields. Increased heterotactic-biased poly(rac-LA) was formed as the number of chlorine atoms increased in TiCl(x)(O-i-Pr)(4)(-)(x). In solution polymerizations, titanium alkoxides catalyzed controlled polymerizations of LA, and end group analysis demonstrated that an alkoxide substituent on the titanium atom acted as the initiator. That polymerization is controlled under our conditions was shown by the linearity of molecular weight versus conversion. A tendency toward formation of heterotactic-biased poly(rac-LA) was observed in the solution polymerizations. The rate of ring-opening polymerization (ROP) and the molecular weight of the polymers are greatly influenced by the substituents on the catalyst, as well as by factors such as the polymerization temperature, polymerization time, and concentration of monomer and catalyst.     

N-alkoxy-pyridinium and N-alkoxy-quinolinium salts as initiators for cationic photopolymerizations

The polymerization of n-butyl vinyl ether (BVE), cyclohexene oxide (CHO) and 3,4-epoxycyclohexyl(methyl)-3′,4′-epoxycyclohexane carboxylate (EEC) was initiated upon UV irradiation (λ_inc > 300 nm) of dichloromethane solutions containing N-ethoxy-2-methylpyridinium ( V ), N-ethoxy-4-phenyl-pyridinium ( VI ) or N-ethoxy-isoquinolinium hexafluorophosphate ( VII ). Whereas the bifunctional EEC was converted into an insoluble gel, BVE and CHO formed polymers of molar mass: M_w = 2 X 10⁴?2 X 10⁵ (PCHO) and M_w ≈ 2 X 10⁴ (PBVE). Protons are formed with a rather high quantum yield [ø(H+) = 0.48 on irradiating VII in dichloromethane; titration with sodium p-nitrophenolate] and it is, therefore, assumed that the polymerization is initiated by photochemically generated protons. © 1992 John Wiley & Sons, Inc.     

Nucleophilic Reactivity of the Thiophosphoryl Group

The difference in the nucleophilic reactivities of the and groups can be satisfactorily explained on the basis of Pearson's acid-base concept^[21]. The thiophosphoryl sulfur is a typical “soft base”, and reacts preferentially with sub-group B metals, halogens, and sp³ hybridized carbon, whereas it is largely inert to “hard acids” such as protons, carbonyl carbon, and tetrahedral phosphorus. Since a nucleophilic attack by the thiophosphoryl sulfur leads to a decrease in the charge density of the phosphorus atom, the latter (or the α-carbon atom in O-alkyl esters) becomes more open to nucleophilic attack. This reaction principle forms the basis of sulfur exchange, dealkylation, isomerization, and the Pistschimuka and Michalski reactions.     

Terpyridines as supramolecular initiators for living polymerization methods

Bis(5,5″-bis(bromomethyl)-2,2′:6′,2″-terpyridine), bis-4′-(4-bromomethylphenyl)-2,2′:6′,2″-terpyridine and 4-hydroxymethyl-5′,5″-dimethyl-2,2′:6′,2″-terpyridine metal complexes have been used as initiators for the living polymerization of 2-oxazolines and L-lactides. In both cases polymers with controlled molecular weights and narrow molecular weight distributions have been obtained. In-line diode array GPC measurements of iron(II) complexed poly(ethyloxazoline)s showed an unexpected absence of fragmentation. Viscosity experiments demonstrated the differences of the complexed and uncomplexed systems.     

Organocuprates as initiators for the polymerization of methyl methacrylate in THF

Several types of lithium organocuprates (I) e.g. R₂CuLi, RR'CuLi, R₃CuLi₂, R₂CuLi₂X (X- CN, SCN), were prepared and used as polymerization initiators for methyl methacrylate in THF at temperatures ranging from −30 to +20 ^*C. Polymerization initiated by a mixed homocuprate, e.g. lithium n-butyl (thien-2-yl)cuprate was studied in more detail. Kinetic measurements indicated an overall large (−4 to −14 kcal) apparent negative activation energy of polymerization in the −30 + +20 ^*C temperature range. The reaction was shown to have a kinetic order of about 1.5 with respect to initiator concentration. Conductance measurements indicate that the equivalent conductance increases with initiator concentration in the 10⁻² + 10⁻¹ M range indicating the formation of multiple ions formed by intermolecular association. The data are consistent with a polymerization involving aggregated ion pairs of as yet undetermined composition. The negative activation energy is tentatively interpreted as due to the exothermic formation of aggregates existing as highly solvated ion pairs.     

Zinc anilido-oxazolinate complexes as initiators for ring opening polymerization

Three new anilido-oxazolines, ortho-C(6)H(4)(NHAr')(4,4-dimethyl-2-oxazoline) [Ar'=2,4,6-trimethylphenyl, HNPh(TriMe)Oxa (1); 2,6-diisopropylphenyl, HNPh(DiiPr)Oxa (2); 2-methoxyphenyl, HNPh(OMe)Oxa (3)], have been prepared. Reactions of 1 or 2 with one molar equivalent of ZnEt(2) in tetrahydrofuran or hexane solution give the zinc ethyl complexes (NPh(TriMe)Oxa)ZnEt (4) and (NPh(DiiPr)Oxa)ZnEt (5). The dinuclear zinc benzyloxide complexes, [(NAr'Oxa)Zn(mu-OBn)](2), [Ar'=2,4,6-trimethylphenyl, (6); 2-methoxyphenyl, (7)], were synthesized by the reaction of 4 with one molar equivalent of benzyl alcohol in tetrahydrofuran solution (for 6) or by treatment of with 3 one molar equivalent of ZnEt(2) in tetrahydrofuran solution followed by the addition of one molar equivalent of benzyl alcohol (for 7). The molecular structures are reported for compounds 6 and 7. Their catalytic activities toward the ring opening polymerization reactions are under investigation.